Request for Conversion from labview 4 to labview 2013

Dear Support,
Could you please update these vi to be readable by Labview 2013?
Thank you in advance, Mary

Mass compiled in 8.2.1, which you can open with 2013.
One of the VIs kept crashing my LabVIEW, so it is not included in this zip file.

Similar Messages

Conversion of VIs from LabView 2013 to 2011

Hi,
I would be grateful for conversion of zipped VIs from LabView 2013 to 2011.
Thank You,
Michal
Solved!
Go to Solution.
Attachments:
main VIs.zip ‏38 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
main VIs 2011.zip ‏27 KB

Please Convert Vis from Labview 2013 to Labview 2011

Please convert the attached Vis from Labview 2013 to Labview 2011
Solved!
Go to Solution.
Attachments:
Convert from2013 to 2011.zip ‏255 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
Converted to 2011.zip ‏176 KB

Email requests purportedly from Apple asking for account verification details, This includes a request for everything from email address to bank account sort code. This can't be for real! Is it?

Email requests purportedly from Apple asking for account verification details.
This includes a request for everything from email address to bank account sort code.
This can't be for real! Is it?

No, it's a scam.

Conversion from LabVIEW 2011 to 8.2

Dear All
Can any body help me to convert the attached file from LabVIEW 2011 to LabVIEW 8.2.
Kind Regards
Muhammad Irfan
Solved!
Go to Solution.
Attachments:
LabVIEW 6281-40 Replace.vi ‏76 KB

This is what the Version Conversion board is for. But here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
LabVIEW 6281-40 Replace.vi ‏99 KB

Request to downconvert from LabVIEW 8.0 to LabVIEW 7.1

Hello,
I'd really appreciate it if someone could downconvert this instrument driver library from LabVIEW 8.0 to LabVIEW 7.1.
Thank you!
Brooks
Attachments:
hp34970a.llb ‏2094 KB

Try the Version Conversion Board. That is what it is there for.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Conversion from LabVIEW 2012 to 8.2

Dear All
Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
Kind Regards
Muhammad Irfan
Solved!
Go to Solution.
Attachments:
PVT - Mathscript Node.vi ‏83 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
PVT - Mathscript Node.vi ‏90 KB

Request for quotation from enquiry or quotation level

Hi,
Can RFQ(request for quotation) be sent from enquiry or quotaion to suppliers for material procurement?
Regards
Suman

hello,
I have created new posting period and series for financial year 2011-12.
In previous year I have created 600 voucher. My issue is that when I am creating new
voucher, voucher number is showing 601. I want that for new series voucher number should be
start from 1. but it seems like numbering series doesn't affect the voucher number.
Because there are no series creation for journal voucher. In this case how can I solve my problem.
Please help me on this.
thanks
Annu

Upload request for Quotation from external data (ME47)

Hi is there a easy way to upload request for change in SAP from external data.
Maybe a functionmodule or BAPI.
Like for transaction ME41 ME42 ME47 etc.
Edited by: J. Paulina on Sep 23, 2008 3:55 PM

For things to happen automatically, you'll need to use JavaScript. To import a record, you use the importTextData document method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.502.html
Note that it can't work with Reader and it must be placed in a trusted function in a folder-level JavaScript file.
To print programmatically, use the print method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.511.html
So the script could loop through the records, printing after each one populates the fields.

A Request for help from me again! Yay!

hi guys! I was working on implementing threads for the directions of the unit. When i press forward once...nothing happens, but when i press twice it gives me this HUGE list of errors. I dont have a clue. Again, any help would be appreciated.
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class NBoard extends JFrame implements KeyListener{
     int selection = 0;
     boolean selectionmade = false;
     final int WIDTH = 600;
     final int HEIGHT = 600;
     Image Viz =Toolkit.getDefaultToolkit().getImage(JOptionPane.showInputDialog("What character do you want?")+".gif");
     int XC = 50;
     int YC = 50;
     Thread moving = new Move();
     Unit Host = new Unit();
     public NBoard(){
          this.setSize(WIDTH,HEIGHT);
          selection = Integer.parseInt(JOptionPane.showInputDialog("What level design do you want?"));
          if(selection > 0){
               selectionmade = true;
          addKeyListener(this);
          this.setVisible(true);
     public static void main(String args[]){
          new NBoard();
     public void paint(Graphics g){
          if(selectionmade == true){
               if(selection == 1){
                    g.setColor(Color.white);
                    g.fillRect(0,0,WIDTH,HEIGHT);
                    g.setColor(Color.black);
                    g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
               if(selection == 2){
                    g.setColor(Color.white);
                    g.fillRect(0,0,WIDTH,HEIGHT);
                    g.setColor(Color.black);
                    g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
                    for(int ctr = 1; ctr < 6; ++ctr){
                         g.drawRect(WIDTH/4 ,ctr * 100, 20, 20);
                         g.drawRect((WIDTH / 3) * 2 ,ctr * 100, 20, 20);
               if(selection == 3){
                    g.setColor(Color.white);
                    g.fillRect(0,0,WIDTH,HEIGHT);
                    g.setColor(Color.black);
                    g.drawLine((WIDTH/2) - 90,0,(WIDTH/2) + 90,HEIGHT);
               g.drawImage(Viz,XC,YC,this);
          public void keyPressed(KeyEvent e){                              //The Problem Areas
               if(e.getKeyChar() == 'w'){
                    moving.start();                                             //Starting the thread to move up
               else if(e.getKeyChar() == 's'){
                    YC = YC + 2;
               else if(e.getKeyChar() == 'a'){
                    XC = XC - 2;
               else if(e.getKeyChar() == 'd'){
                    XC = XC + 2;
               System.out.println(e.getKeyChar());
               repaint();
     public void keyReleased(KeyEvent e){                              //The Problem Areas
          if(e.getKeyChar() == 'w'){
               moving.interrupt();                                             //Trying to interrupt the thread once the key is released
     public void keyTyped(KeyEvent e){}
class Move extends Thread{                                                  //The Problem Areas
     public void run(){                                                       //The Thread
          Unit.XC = Unit.XC - 2;
          try{
               Thread.sleep(1000);
          catch (Exception e){}
class Unit{                                                                      //The Object which will hold all of the information about each unit
     static int XC = 30;
     static int YC = 30;
} By the way, here is my order of events, so you can look forward to seeing requests for help for them (hopefully not).
Threads: Moving the guy around
Threads: Making him shoot a ball at the mouses position
Network: Allow others to join/play game (This is gonna be HUGE probably), while host decides on game type.
Thanks for all the help so far!

Where does moving ever get started? Why does Move extend Thread instead of implementing Runnable? (Implementing runnable is preferred and often the correct way to do it and it is in this case)
But regardless there shoud be a moving.start() somewhere or start of the Thread that has the Runnable target Move.... I don't think I see one. Unless I missed it.
so...itll work if i change the setup to Runnable?

HTTP_REFERER header is missing in request for .mp4 from Safari on ipad or iphone

I just discovered that when I have a .mp4 file embedded in my webpage and I visit that page using Safari on the iPad, the request for the .mp4 is missing the referer header. This is a problem for me because I use URL Rewriting in my web.config file on IIS and I redirect requests (in which the HTTP_REFERER does not begin with my own domain name) to a no hotlink image. Safari on the iphone4 does the same thing when I visit this page--the HTTP_REFERER header in the request for the .mp4 is empty. I've had to turn my hotlinking protection for MP4 files off on my site in order for ipad/iphone to display the video on my page. If the hotlink protection (i.e., rewrite rule in my web.config) is turned on, the video does not display.
It seems like this would be a common issue because hotlink protection is commonly implemented in this manner.
Is there something I am issing? Some special way of preventing hotlinking and yet letting the mp4 content through to idevices?
Thank You!

I have the same issue with Safari, but with mp3 files not playing using a HTML5 player on my website. I have hotlink protection enabled and the audio plays on every other browser except Safari, so there's seems to be a problem playing any videos or mp3 files when hotlink protection is enabled.

Open vi reference conversion from Labview 6 to Labview 2014

Is there a way that someone can help me convert this VI written in Labview 6.1 so that I can work en EXE in Labview 2014.
I succed to open this vi from 6.1 to 2014 but it does not run. The open vi reference those not work in exe program. Someone know how I can replace that function...
Thanks!
Solved!
Go to Solution.
Attachments:
to convert 2104.zip ‏17 KB

Error 7 is File Not Found. So your dynamically called VI is not in your executable.
In the build spec for the executable in your project, there is a section for "Source Files". On of the options for the VIs is "Always Include".
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

System compatibilty issues for upgrade from LabVIEW 5.0.1 to latest LabVIEW

I have inherited an old experimental set up running with Labview 5.0.1 on WindowsNT with NI acquisition hardware (see attached picture for details) and I want to upgrade to the latest LabVIEW version to run on WindowsXP. Before doing the upgrade I have a few questions:
- Will there be a compatibility issue between the hardware and the new software/environment ? (ie. will a hardware upgrade be necessary ?)
- Will any of the application G programming code that drives our experiment be re-usable or will a complete rewrite be needed ? I am a LabVIEW programming beginner and would very much prefer only a slight modification of our existing code
- Alternatively I tried to run the application with LabVIEW 5.0.1 on WindowsXP and although all the hardware was recognised, the set up recorded some strange data: the voltage curve had the expected shape but wrong values. Any ideas what happened ? (both NIdaqmx and Traditional drivers were installed on this PC).
Many thanks for your help,
Nick

Nick_k wrote:
I have inherited an old experimental set up running with Labview 5.0.1 on WindowsNT with NI acquisition hardware (see attached picture for details) and I want to upgrade to the latest LabVIEW version to run on WindowsXP. Before doing the upgrade I have a few questions:
- Will there be a compatibility issue between the hardware and the new software/environment ? (ie. will a hardware upgrade be necessary ?)
- Will any of the application G programming code that drives our experiment be re-usable or will a complete rewrite be needed ? I am a LabVIEW programming beginner and would very much prefer only a slight modification of our existing code
- Alternatively I tried to run the application with LabVIEW 5.0.1 on WindowsXP and although all the hardware was recognised, the set up recorded some strange data: the voltage curve had the expected shape but wrong values. Any ideas what happened ? (both NIdaqmx and Traditional drivers were installed on this PC).
Many thanks for your help,
Nick
Hi Nick
On general basis I think you can transfer you design to Labview 8.x and run the code. But it is some obstacles on the road. First of all you can not read your old 5.0 code in 8.x. But the trick is to convert it to a newer version like say 7.0 or 7.1 Then you can read it Labview 8.x. You can post your code in this forum. Someone will help you with the conversion. I also guess your Daq board is not supported by the new DaqMX driver. So you may use an older daq driver. The same thing apply to the GPIB driver I think. You should call NI and ask them for advice regarding which driver to use.
Then you install Labview 8.x on the new computer do not install any Daq driver or GPIB driver. This because you can not replace driver with an older one. Then you install an older driver to a newer Labview system some files might get installed in the wrong folder. Read this to avoid this to happened http://digital.ni.com/public.nsf/allkb/F185E098C7EC5A3486256D2E00691BB2
Some GPIB issues
If your GPIB card is made for ISA buss, I think you have to get a new one. Modern computers do not have ISA buss. It is also possible that your old program is not made for VISA. But it should not be to hard to convert to VISA. Or you may take a look at and see if NI has a VISA driver for instrument.
Good Luck
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Conversion from Labview 12 to Labview 2011

This an example file I downloaded from the tutorial but it's only available in LabView 12. I would like to see the example they provided in Labview 2011. Any help would be appreciated. Thank You!
Sorry, there were multiple files and it was compiled into a zip file.
Or can someone teach me to convert it?
Attachments:
heart_rate_monitor_example.zip ‏182 KB

Here you go
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Heart Rate Monitor Project.zip ‏146 KB

Conversion from labview 9 to labview 8.2

Hi, can you convert those tow files for me? i have labview 8.2 and the files are in labview 9. thank you
Solved!
Go to Solution.
Attachments:
Agilent 6612C Voltage Controller.vi ‏42 KB
Agilent 6612C Voltage ControllerMOD1InPlace.vi ‏13 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Agilent 6612C Voltage ControllerMOD1InPlace.vi ‏17 KB
Agilent 6612C Voltage Controller.vi ‏59 KB

Request for Conversion from labview 4 to labview 2013

Similar Messages

Maybe you are looking for