Request for cookbook for internet sales and CRM middleware

Hi
can anybody send cookbook for internet sales and CRM middleware. Your response will be rewarded.
please send to : [email protected]
thanks and regards
bhaskar

Hi Bhaskar,
I have sent you the required docs for Middlware and Internet Sales.
<b>Reward points if it helps.</b>
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left.

Similar Messages

Diff between R/3 Internet sales and CRM Internet sales

Hi every body!
Could any body tell the basic Diff between R/3 Internet sales and CRM Internet sales.
Thank you,
mark..

Hi Markiv
Just to round that off, the ERP version lacks:
- Rule based ATP (with APO)
- Customer specific product numbers
- Web based catalog management
- Support for further e-Service processes
Cheers
Dom

Difference between the R/3 internet sales and CRM Internet sales

Hello
I want to know the difference between the R/3 internet sales and CRM Internet sales
If there is any document send it to my email
[email protected]
Regards
Jacopo francois

Jacopo,
R/3 ISA and CRM ISA differ in terms of Backend and some of the functionalities.
CRM ISA:
- CRM system as backend.
- Till 4.0, Marketing functionalities only available in CRM ISA
- IPC, Trex mandatory
- Items not in catalog can be ordered
- Catalog views supported
R/3 ISA:
- R/3 system as backend. Suitable for organizations without CRM.
- No MArketing till 4.0 (am not sure about 5.0 though!)
- IPC, Trex not mandatory
- Items not replicated through catalog cannot be ordered
- No catalog views supported
From the code level, you have to use different java packages to make changes. XCM scenarios too are different for both.
Generally, if you have CRM, it makes sense to deploy CRM ISA. But, if there is no CRM, then you can go for R/3 edition of ISA.
-Pat

What is the process for connecting ethernet. Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left. Note Airport wireless is working.

What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate

It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks!

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

Internet sales and ICSS

Hi all,
If anyone has SIM files or any useful documentation/links on Internet sales and ICSS, plz send to [email protected]
Thanks.

Hi
Internet Sales
http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
E-Service
http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
I hope this helps
Cheers

JCO difference between SAP J2ee 620 and Webas 640 for Internet Sales

Does anyone have some information on how Internet Sales manages JCO calls to R/3 or CRM on WebAS 640?
Till J2EE 620 the sapjco.jar file directory had to be in classpath along with the relevant dlls in WinNt directory.
WebAs 640 Java installation doesn't mandate any such steps.
How does this work? The jar probably is in the cluster/server/bin/ext folder but what about the native libraries? How are they loaded.
I am having problems making RFC calls to R/3 from a web application deployed on SAP WebAS 640.
This is not the internet sales application but a general J2EE application and I was wondering if i could use the same approach as used by Internet Sales to load the native libraries.
Any help would be appreciated.
Bharat.

Vivek,
We have the WebAs 640 Java system running on a AIX server. I placed the following folder under classpath
/usr/sap/<SAPSID>/JC**/j2ee/cluster/server/bin/ext/com.sap.mw.jco/sapjrfc.jar
The error thrown is
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [Can't find library sapjcorfc (libsapjcorfc.a or .so) in sun.boot.library.path or java.library.path
sun.boot.library.path=/usr/java14_64/jre/bin
java.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]. java.library.path [/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]
The problem is a search on libsapjcorfc.* only return dll files and no .so or .a files.
Wondering how ISA loads the native libraries on AIX!
Thx,
Bharat.

Credit Memo Request for intercompany sales process

Hi Experts
I try to find SAP notes regardsing the credit memo request for intercompany related issue but I can
not find any nates. The customer return the goods with 2 different
scenario :-
-Return with credit
-Return with replacement.
Can anybody explain how this 2 scenario perform in the SAP
intercompany sales process. Appreciate for your help. Thanks in advance.
Regards,
Jennie Tan

Already answered
Enter IG (internal credit memo) as the billing type for intercompany
billing for order type RE.
Cust-Sales/distrib-Transactions-Billing-Intercompany billing-Order types
Intercompany billing always refers to a delivery
Processing flow will be:
1. Create returns request invoice receipt (with or w/out reference)
2. Create returns delivery and goods receipt
3. Create credit memo invoice receipt for customer for 1.
4. Create internal credit memo for 2.
Therefore you must make the following entries in the document flow
for billing documents:
Target BillType        DlvType              ItemCat
a)    IG                  LR
b)    IG                  LR                    REN
Parameters for entries:
For a) Copying requirement: 14 Dlv.-rel.header IV
      Copy item no.: x (Check and decide yourself)
For b)Copying requirement: 15 Dlv.rel. item IV
      Data VBRK/VBRP      : 1 Inv.split (sample)
      Billing quantity    : B
      Qty/itm val.pos/neg : +
      Pricing type        : G
Also, refer following SAP Notes
13160 - Returns with intercompany billing
24756 - Credit memo requests with inter-company billing
652007 - Reporting internal credit memos on arrival side
11980 - Intercompany billing with order-related billing document
164074 - Problems for internal invoices on returns
Thanks & Regards
JP

Single workbench request for CONSUMER PROXY in crm 7.0.

Hi all ,
I have a problem related to "consumer proxy" in sap crm 7.0 release. In our system , we have several proxies (existing) for consuming inter system web services (WSDL's) which were generated from SE80 , client proxies, wizard.
As we know , at the very first time of creation , the workbench request holds both the structure , class and object of the proxy ,but if afterwards , the proxy is regenarated for changed structure in WSDL , then that workbench request only holds the regeneration request , doesnt hold the base structure.
In our case , in those old proxies , there are so many requests .in some of it , many cross object requests are there , so we are facing problems to transport these proxies to a blank client(newly created).
So my question is
IS THERE ANY WAY TO CREATE ONLY ONE WORKBENCH REQUEST (MIGHT BE FROM SE80) FOR THOSE EXISTING PROXIES , THAT THEY HOLD THE STRUCTURE AND THE CHANGED STRUCTURE ALSO FOR INDIVIDUAL.
THANKS IN ADVANCE.
ARNAB MUKHERJEE
INTEGRATION DEVELOPER.

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

Request for proper information and to refuse to help when it's missing

On behalf of many of us volunteers who are getting tired of guessing the environment of those who are asking for help, I hereby
ASK ALL VOLUNTEERS TO STOP RESPONDING TO REQUESTS FOR TECHNICAL ASSISTANCE THAT DO NOT PROVIDE SUFFICIENT INFORMATION
In general, sufficient information should include:
1) Operating system and Service Pack, not just the family.
- Vista is a Family of operating systems. Insufficient information (need Home, Home Premium, etc.)
- XP is a Family of operating systems. Insufficient information (need Home, Professional, etc.)
- Linux is a Family of operating systems. Insufficient information (need Oracle Enterprise Linux 4 Update 4, Red Hat EL 4 Update 2, OpenSuSE 10.3, Fedora 8, etc.)
2) Version of database installed to 4 digits (9.2.0.6, 10.2.0.3, 11.1.0.6) and the database's ORACLE_HOME and ORACLE_SID
3) Which product being used to access the database, which computer that product is on, and the Oracle Home from which the product is run. (SQLPlus, same home as the database)
4) The output of lsnrctl status, the contents of the tnsnames.ora and the contents of the listener.ora
5) The output of the ipconfig /all or ifconfig and of hostname
6) Copy paste of the actual error message, not just a paraphrase of part of a line..
Any other ideas?

I am not requesting this to be enforced by the forum.
I am requesting that people like you and me reply by linking to this thread (or to the other excellent related threads) INSTEAD of replying. If we do it consistently, eventually the newbies will also enforce it voluntarily, and that will cut the useless teeth-pulling-effort replies to a minimum.
In your 90% posts figure - you do realize that that means 90% of the posts are badly formed and are wasting your time as well as mine.
Or - if they were properly formed - you and I could answer that with a lot less effort and a lot faster. With the implication is that the person asking would generally get a resolution a lot faster as well. Net result - you and I get to sleep more (or answer more questions) and people with problems are happier because they get them resolved faster.

Sales Report for US Sales and Use tax

Hi,
I'm looking for t-code to extract detailed sales report having Gross sales, Exempt sales , Ship to state, Ship to County\ City, Sales Tax collected. If I'm getting this report i can verify what my sales tax software is updating.
When i extract tcode - ZINVLIS i don't get much detail.
Please help me in extracting complete sales detail which can be used for sales and use tax verification process and audit purpose.
Thanks,
Karthik

Hi Karthik,
There is no standard report available as per my knowledge.You may develop Z report to achive your requirment. Check some LIS report can give data (MC01 is transaction where you can check all type of key figure reports)
Regards
Mani Kumar

Credit Memo Request for New Sales Organisation

Hi Frnds
I have a requirement in which i need to create a Credit Memo Request for the newly created sales organisation using the old billing document number created for old sales organisation.Please kindly help me in this regard.
Thanks in Advace
Sowmmya B

Hi,
Did you try creating a CMR online ??
Regards

Transport request for BW queries and roles.

Hi All,
we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role. Both the roles and queries does not exist and will be created in Developement environment.
We just want to know how we can transport them in the quality environment. What is the right method to transport them.
Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
Thanks & Kind Regards,
Hardeep

Thanks a lot for all of you for your quick response. But i still have questions.
If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role.

I redeem my accound $15 via Gift Card,shows on my ID BUT when I purchase request for my pastword and shows its not there,what's going on?

I just purchase a gift card for my iTunes account. Follow the instruction and place the code to redeem my account. On iTUnes Store Home it shows $15.00 has been credited to my account but when I got to purchase its not there and request for my credit card infomation. Yet when I check the account infomation its in my name but the $15.00 gift card isn't present in my account. What happen to my money?

Forget it I fixed myself

Request for cookbook for internet sales and CRM middleware

Similar Messages

Maybe you are looking for