Request for Disassembly guide for GE620DX (MS-16G5)
Hi Guys,
Do you have any disassembly guide for GE620DX (MS-16G5). Already looked on the FAQ page but it seems it's not there yet. Thanks in advance.
wow. this seems pretty complicated. main reason for my request was to check and clean under the keys for anything that have gotten under there. thanks for the guide Bas
Similar Messages
-
Request disassembly guide for MSI X460DX-291
Found a clip on Youtube, but the quality is a bit grainy. Anyone have .pdf manual/schematic?
Much appreciated!
:hat tip:CHEERS
- Victoryou can use this disassembly guide:
https://forum-en.msi.com/index.php?topic=180786.0 -
Looking for Assembly / Disassembly guide for Megabook M670 (MS-1632) Notebook
Good morning,
I've been searching for an Assembly / Disassembly guide for the Megabook M670 (MS-1632) Notebook. If you have this available, could you please post it on this forum?
Thanks in advance.S270 guide to open the machine for e.g. adding memory.
>>Link<< -
Looking for Disassembly guide VR602
Hi there all,
Looking for a Disassembly guide for the VR602.
Thx.Here you go:
https://forum-en.msi.com/moderator/assembly-guides/assemble-163n.pdf
https://forum-en.msi.com/moderator/assembly-guides/ms-163n-disassemble-sop.pdf -
Disassembly guide for AE1900-09SUS
Hi there, I need to replace the CMOS battery, of my computer, because every time I disconnect the computer is looses the time setting.
How to I proceed ? Is there a disassembly guide ?
Thanks,
PasqualeThere are no disassembly guides available to us for All-In-One PCs. Best ask MSI for advice on this:
http://support.msi.com -
Request for MSI X360(MS-1355) dissassembly guide
Request for MSI X360(MS-1355) dissassembly guide
I need clearer instruction on how to remove the keyboard.
There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
How exactly do you pry the said 3 clips/locks at the top of the keyboard? -
Request for MSI U180(MS-N082) dissassembly guide
Request for MSI U180(MS-N082) dissassembly guide
I need clearer instruction on how to remove the keyboard.
There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
How exactly do you pry the said 3 clips/locks at the top of the keyboard? -
Disassembly Guide for MSI FR700 (MS-1751)
Hi,
I'm new to this forum and I was hoping someone could help me getting a FR700 (MS-1751) disassembly guide. I'm also trying to find out what type of bluetooth module this laptop uses as mine doesn't have one.
Thanks!
SebastianQuote from: Bas on 09-January-11, 16:56:38
Here you go: https://forum-en.msi.com/moderator/assembly-guides/fr700-disassembly-guide.pdf
Thank you SOO Much!! This answers my question =D -
How to create request for extracting company code
Hi All,
Can any body guide me how to create a request for extraction of company code 0COMP_CODE_ATTR.
Actually i have created a request using transport conneciton but while moving this request to quality system i am getting following error.
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Mapping between data source 0COMP_CODE_TEXT and source system QLTCLNT440 is inconsistent
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Field KEY1 will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Field TXTMD will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Start of the after-import method for object type R3TR ISTS (Activation Mode)
Reference to transfer structure 0COMP_CODE_TEXT_BB not available. No activation possible.
Start of the after-import method for object type R3TR ISTS (Delete Mode)
Start of the after-import method for object type R3TR ISMP (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
The errors affect the following components:
BW-WHM (Warehouse Management)
Actually i have checked in Quality system 0COMP_CODE_TEXT is availble active. But i think we have to use 0COMP_CODE_ATTR data source...
Pls help,,,
Regards,
viren.Hi Viren,
Glad that your problem is resolved.
Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
Bye
Dinesh -
request for code
needs a code (which ,copies the file on your computer (it copies the file to which it will path in TextBox1)
and is pasted file in the folder: C: \ Program Files \ RunerBat \ Backup
and needs code ,which when clicked, "button2" opens "savefiledialog" and writes text with richtextbox1 as .bat ,,,
but stores only when you click button1, it comes to me more about the button "select path the record"This forum is not for ordering code.
Try it yourself. Read the documentation. It is grouped by topic.
.NET Framework Development Guide
To your question related these sub topics:
File and Stream I/O
SaveFileDialog Component (Windows Forms)
Button Control (Windows Forms)
Creating Event Handlers in Windows Forms
If you have a specific problem, post the code you wrote and which question you have.
Armin -
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012? -
Skipping request for user policy assignments due to agent configuration for authority
Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140422164904.539000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 604;
CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
DateTime = "20140422164946.336000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 3216;
CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140804215639.612000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 2212;
CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804215651.440000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 3348;
CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN: smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.423000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.485000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.563000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.657000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.048000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2508;
CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.110000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2188;
CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.188000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-JanHello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS : 1
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION : {}
__SERVER : DEMO-CAPTURE
__NAMESPACE : ROOT\ccm
__PATH :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue :
PSComputerName : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan -
How to assign transport request for Dynamic selection in SE36
Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:27 PMModerator message - Cross post locked
Total Questions: 283 (131 unresolved)
Please also close your old posts and assign po1nts to helpful answers.
Rob
Edited by: Rob Burbank on Jul 29, 2010 9:50 AM -
Query - unable to fulfill request for 65536 bytes of memory space
Hi all,
When i executing query it is running for 20 mins and showing this below error. Please guide me on this.
Error:
- Unable to fulfill request for 65536 bytes of memory space
- No more storage space available for extending an internal table
Note:
Report design based on cube and it have around 60 laks records, aggrated and compression already available for this cube.
Thanks & Regards,
R. SaravananHi raj,
Are you trying to execute the report in BEx analyzer?
if data is huge try to reduce the volume of data with the help of filters for ex run the report for particular material, date ,cost center etc.
If you are using BEx analyzer and with MS office -2003 version then Ms excell has a limitation of 65536 rows, this might be causing the error.
Looks like your report is having more than 65536 records (selections for which your report was run).
if you want all the records to be displayed try to use WAD. or use the MS excel 2007 or greater versions(not sure if it can hold all your 60 lack records).
Regards
KP
Edited by: prashanthk on Feb 1, 2011 3:09 PM -
Request MSI A6200/CR620 disassembly guide
I mainly need it for a keyboard replacement on an MSI A6200 i5-430m, but I'm pretty sure the CR620 works for it as well.Regardless it'll be good to have since I own this device. Thanks.
you can use this disassembly guide:
https://forum-en.msi.com/index.php?topic=180786.0
Maybe you are looking for
-
About photoshop organizer: how can I shift pictures from one catalogue to another one?
how can I shift pictures from one catalogue to another one?
-
Site created in iWeb not working on iPad.
I created kind of a test site in iWeb, and then "hosted" it on the web via Opera Unite. The site I created displays correctly over the net on the dektop versions of Opera, Firefox, and Safari, but on my iPad, both Safari and Atomic Web have issues. N
-
Hi SAP Gurus: I have more than 100 blanket orders with different vendors. I want to generate a report of all of them showing all the open POs (blanket orders). I can check them individually in the PO history, but is there any way I can generate a rep
-
Why does my library location keep changing?
I kep my iTunes library on a separate internal HD. It's the ONLY thing on that drive. TUNES: iTunes/iTunesMusic But a few months ago, iTunes started "magically" making folders, and importing songs one level PREVIOUS on that drive: TUNES: iTunes Weird
-
QM & PM Calibration Process Configuration
Hi I wanted to configure a calibration process. I have made the settings for PM and QM integration but unfortunately in our implementation QM is not in scope but I need to do the QM settings which will be required for calibration. Can anyone provide