Request for Discount , Free Transport before creating PO

How does the customer will ask for discount or free transportation of goods to be delivered from a vendor .
I want to send quotations to vendors such that it should contain quantity of items along with request for free goods delivery or some discounts . After getting their quotations back from the vendors is their any way of asking for negotiation of price or free goods delivery ( if this is not asked in RFQ ) .
I need if this is possible , where we define all this things. Points will be rewarded .
- David Boon

Hello David,
Free shipping and discounts are part of negotiation with the vendor. Once you receive the Quotation from vendor then it will be maintained in "maintain Quotation - ME47".
Based on the comparition list, you can negotiate with the vendor for Free Shipping and discounts. If vendor is ready to supply the material with free of cost and discount then you can maintain Discount in Quotation again or in purchase order, where as you will not maintain delivery condition in Quotation/Purchase order.
Hope this helps.
Regards
Arif Mansuri

Similar Messages

  • Legitimate request for a free upgrade to Windows 7

    I am new to this forum and am incensed by the attitude of Toshiba customer support staff towards my legitimate request for a free upgrade to windows 7, below is an email I have written to them which I would appreciate your comments on:
    To whom it may concern.
    I am writing to express my displeasure with your response to my legitimate request for a free upgrade to Windows 7 seeing that I have recently spent over 1000 of one of your products.
    After having multiple issues with the Vista operating system, I phoned your customer support on the 4th of December and had a conversation with a male employee who was unable to satisfy me as to why my machine was not entitled to a free upgrade to Windows 7 as mentioned on your web site.
    He offered to pass me up to a supervisor which I accepted and was connected to a female member of staff who tried to explain that my model was not included in the "promotion". I could see no sense in her explanation, in context to the facts that my machine was of the same age and family as those been offered the "promotion"
    This employee was again unable to answer or understand my question and said she was not technically minded so I asked her to put me through to her supervisor and after 10 minutes holding on the line I got to speak to Alistair Cook.
    Mr Cook explained the "promotion" to me but could not explain why my model was excluded so he said he would call me back when he found out why. This he did some short time after and reiterated his earlier account with no further clarity. He said he would do more research on the matter and email me the findings.
    This contacting your customer support office took a total of 48 minutes on the phone.
    Vista is to all intents a failure, a fact you accept by your offer of free upgrades to your recent customers, so why discriminate against some consumers and not others.
    I am a long time user of Toshiba computers, this Qosmio is my third laptop and I have always been satisfied with the customer support, not that it was greatly needed. So I again ask that you do the right thing and provide me with my principled entitlement.
    Yours sincerely.
    john ebrill

    Hi mate
    Very interesting point of view.
    But fact is that not all Toshiba notebooks are verified for a Win 7 upgrade.
    Why???
    Well I have checked the Toshiba European page
    http://eu.computers.toshiba-europe.com -> Windows Upgrade 7
    and there I could find a FAQ list.
    One of the FAQ provides this info:
    _What requirements do I need to satisfy to take part in the Upgrade Program?_
    +To take part in the Upgrade Program, you must satisfy the following three criteria:+
    +1. You purchased your Toshiba computer between 26th June 2009 and 31st January 2010.+
    +2. Your Toshiba computer is one of the model series to be verified on the Toshiba page.+
    +3. Along with your Toshiba computer you purchased a Windows Vista Home Premium, Windows Vista Business, or Windows Vista Ultimate operating system.+
    It looks like several criteria must be satisfied in order to participate in Win 7 upgrade program.

  • Transport request for SAP Query - SQ01, SQ02, SQ03

    Hi Experts,
      I have a doubt, Whether we can have request for SAP Query which have created from Transaction SQ01.If Yes then How to do that....?
    Thanks in Advance,
    Chetan Joshi

    Hi,
    Use the program RSAQR3TR
    Thanks
    Naren

  • BBPSC18 - Request for external staff - Classic Scenario in SRM 5.0 possible

    Hello Community,
    one of my customers wants to use "Reqest for External Staff". As far as I remember, in SRM 5.0 it is only possible in "Standalone Scenario".
    Is this assumption correct? So not possible in Classic Scenario?
    How about "Extended Classic"? Probably not possible either, right?
    Thanks for any help or input!
    Cheers, Julian

    Hi Rahul,
    thanks for your answer!
    Actually I am only looking into the part "Request for External Staff" - "Acceppt Bid" - "Create PO (Classic in ERP)".
    I have seen that this part works in SRM 7.01.
    But currently we are not planning to upgrade. We are still on 5.0.
    I tested the abovementioned process in our DEV-System. I behaves fine, no error messages. But when I want to create the PO out of the "Check Status" (yes, in SRM 5.0 this was possible), the system pretends to create a PO but it never gets created. So I just wonder if I missed some customizing, or if this also only works in Standalone or if there maybe is a smart technical workaround (some custom coding etc...).
    Cheers, Julian

  • Upgrade request for Lion?

    I submit a request for a  free upgrade to Lion since i got a new imac 3 days ago. I submit the application more that 24 hours ago. How long does it takes?

    This is a user to user forum. There is no one here who can help you.
    Allan

  • Waited and waited for a free upgrade.

    requested for a free copy of mountain lion on july 25th 10 am and still no response.
    why doesn't apple just ask to pay instead of mentioning free upgrade.

    Typically, the grace period is 30 days. The beta was not a formal release and as such doesn't count as announcement, and wouldn't count as part of grace period. However, you might try contacting Adobe Customer Services and plead for a special case.

  • How to create transport request for standard web template

    hi all
    can any one tell me the step by step procedure to create transport request for standard template?
    thanks
    shalini

    Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
    Message was edited by:
            Jerome

  • How to create transport request for standard text created using SO10.

    Hi,
    How to create transport request for standard text created using SO10?
    Regards
    Ramakrishna L

    Hi,
    For the Standard text created in SO10,
    please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
    Double click on ADRS or ST or what ever your type of text->
    Enter your standard text name
    Click on transport button->SHIFT+f6-> It will ask you for a transport request.
    Best regards,
    Siva

  • I want to upload om data through lsmw. how can i create transport request for lsmw data.

    can anyone help me?

    Hi Anand,
    There are 2 ways for transporting LSMW data from a system to another.
    1) Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. Hence you don't transfer the object a colleague might have created and that should stay in development system. LSMW -> Extras -> Export project  
    2)Transport request with this method, you can transport a LSMW project in full (you cannot select the objects you want). With this method, the project will be transported as any other SAP object in a transport order. 
    LSMW -> Extras -> Create change request 
    For more information, refer below link Steps to copy LSMW from one client to another
    Thanks
    KH

  • Steps for transporting the created request

    hi,
    sap gurus,
    kindly explain the configuration steps for
    how we will transport a created request
    from one server to another
    regards,
    balaji.t
    09990019711.

    Transport Request is generated in following scenarios:
    1. Customizing Request - When doing or changing some customization.
    2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
    Transport Request is released through SE10, to be transported to Quality & production server.
    Configuration of Transport Request System is configured by Basis consultant. Basis Consultant is also responsible for transporting the Transport request from Development server to Quality & Production.
    Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
    Benefit of Transport Request:
    SAP Landscape normally has 3- Tier system:
    Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
    Quality Server - Mainly useful for testing.
    Production Server Actual / Live server, where the real transactions are created & posted.
    Regards,
    Rajesh Banka
    Reward Points if Helpful.

  • Creating transport request for SQVI

    Hi ABAP Guru's,
    I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
    Thanks.
    Regards,
    Tushar.

    Hi Tushar,
    You cannot transport The query made via  SQVI is only intended for individual use/reporting purpose.
    To transport the query by converting it to SAP Query  source of data tobe converted to an Infoset.
    SQVI-> SAP QUERY
    QUERY(MENU) -> CONVERT QUICKVIEWS
    Assign Infoset and Area to the Query and then you can transport.
    Hope this may help you.
    Regards,
    Lanka

  • How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created  ?

    Dear Abapers,
    I request the Abapers kindly reply for this blog
    I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ? 
    I checked in SE03 transaction the transport request was there.  But I want to retrieve the existing transport request which is not moved to Quality?
    Is it possible to retrieve the existing transport request in development which is not moved to quality ?
    Like how we retrieving the programs using versions in development server,  In the same way I want to retrieve the sapscript layout in development server ?
    Thanks & Regards
    Muzeebur Rahiman.S

    Hi,
    There is no version management for SapScript or Smartforms .
    When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
    I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
    cheers
    Jānis

  • Doubt in creating the transport request for "STANDARD TEXT""

    HI ALL,
    i used the standard text in scripts but i am getting the problem while creating the transport request for that,
    i am not able to create the transport request for that,if anybody knows plzlet me know,
    this is very urgent,
    thanks and regards,
    saikrishna.

    HI SURESH ,
    THANKS FOR UR IMMEDIATE REPLY ,
    i executed that report in that i have given
    Name of Correction : ZREPST
    Textkey-object:
    Text key name:
    Text key - ID: ST
    Text key - language :EN
    Here Textkey-object,Text key name
    wat i have to ,give after that ,can i execute that ,
    will it create the request.
    plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
    plz let me know immediately,
    thanks and regards,
    saikrishna.

  • How to create second transport request for same programe

    Hello ,
    I created workbench transport request. The changes are done and still in development system.
    Now I have to do another change on the same program that has to be in different transport request,
    but whenever I  change something, and activate it, the changes are saved in first transport. How I can
    create another transport request for the same program without releasing the first one.
    Thanks

    Ask your basis team to provide you with a "Transport of Copies" request.
    Once you get it, add your object in this request and transport. your object will be transported and the original request will not be released. Do note that the changes will still be saved in the original request but you can still transport your object without releasing the original request.
    Edited by: Priyank Jain on Aug 12, 2010 4:12 AM

  • How to create Transport request for OKC9

    Hi Experts,
    I changed the Prerequisite for one of the substitution in Development client.
    No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request.  Please help me out how to create the Transport Request for the same.
    Regards
    Vijay

    Check whether t he Request is being generated or not 
    if yes
    go to SE10
    display the tranport request
    Release the Cusotmising Task  first
    later relase the Request
    and later Check whetehr the Request is passed in Qiality form Development thru t code STMS
    Check with ur basis consultant once

Maybe you are looking for

  • Computer not authorised for syncing with iPhone with IOS 7

    Unable to sync iPhone 4S (with IOS 7) to my PC.  Error message is that computer not authorised.  Have tried all on-line steps to rectify.  e.g. Control Panel User settings. Anybody have any clues on this problem?

  • Seeburger SFTP is not able connect to remote host

    Hi, I have configured seeburger adapter (STPF) on XI 3.0 SP19 as per the seeburger installation document, but when we are trying to send the data to a file server using SFTP, we are getting below error in reciver communication channel, please help me

  • Date Format in Arabic

    Hi Everyone, I have problem in inserting date format into a table where together with Arabic data like 'Arabic Data'||to_date(:date_field.date,'DD/MM/YYYY'); it is showing Mar-10-03 (Month-Year-day) instead of DD/MM/YYYY. I would appreciate your help

  • Problem: db link consume a lots of resources.

    We have two production database for different purposes. Same of our application use others database. We are using Oracle Forms and reports prelimary database technology. We are using DB link to integrate some of our application Links consume a lost o

  • IPhoto on iPad major problems

    I got an iPad for my Dad. He has 73,000 photos, about 46 gb worth. My first sync went poorly. It did not give any error messages, but the photos appeared to be transferred (it's a 64 gb iPad, and the sync showed the photos taking up space on the iPad