Request for Fiber Switch Recommendation

I'm looking for a fiber switch to connect 8-12 computers via multi-mode @ 100mb. I also need the switch to act as a DHCP server. I'm looking at WS-C3750G-12S-S. I think this will do what I need. So here are my questions:
Does this model require me to purchase seperate SFP transceivers or are they included?
Is there a cheaper solution?
Thanks

100BaseFx part number is GLC-GE-100FX and you can get this working on a 3750G-12S (if you can still buy this model).
Yes, the GLC-GE-100FX is a separate line item and NOT bundled.
The same switch can also act as a DHCP server.

Similar Messages

Explanation RADIUS server failed to respond to request for STA

Hi all,
i have configured WLC 5508 to access through FreeRadius. Login is working fine but i see a lot of Warning message like :
WLC_5508_SECONDARY: *radiusTransportThread: #AAA-4-RADIUS_RESPONSE_FAILED: radius_db.c:472 RADIUS server X.X.X.X:X failed to respond to request(ID 28) for STA 40:83:de:3e:ee:81 / user '4083de3eee81'
In Cisco System Message i've found :
Explanation RADIUS server failed to respond to request for STA.
Recommended Action No action is required.
Is there a solution?
Thanks
Marco

I think you've not configured the WLC as a RADIUS client on the RADIUS server, or the RADIUS shared secret is incorrect.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml

Request for switch off protection in coming new iphone.

Dear apple
Subject- Request for switch off protection in coming new iphone.
I am a very new customer of yours, have bought a iPhone 5s on 25th Dec '13, but unfortunately someone stolen my phone in a MELA in my city. I immediately call my iphone but getting it switch off, as the thief had put the phone in switch off mode. I search it in iCloud with find my iphone apps but getting offline till date. I use pass code & finger print protection that's why probably it can't be use by the thief, but it can be sell as spare parts by opening up its parts . I had do all legal formalities & inform my carrier to lock my sim. Recently I again bought a new iPhone 4s 8GB from amazon.com & using it now.
It is the time to welcoming new iphone probably iphone 6/iphone air in this fall. I have plan to buy it & a apple laptop but first iphone 6 followed by iwatch if you launch & than laptop.
Now coming to the main point why I have written this mail let's explain it - I think you should put a switch off protection in this new device so that someone can't put the phone in switch off mode except the owner, at-least phone can be track till the battery last if someone stollen it. Because I know the problem & pain when someone lose a smart phone with all personal details. So please consider this in your new device as a new feature.
I have given the details of my both phone -
1.iphone 5s Gold
IMEI no
SL no F2******RC6
Parts no MF354HN/A
2. iPhone 4s 8GB black
IMEI no
SL no C8*****ML6
Parts noMF265HN/A
Thanking you
Dr Jyoti Prasad Rajkhowa
Sivsagar
Assam
India
<Edited by Host>

This is a user-to-user forum. If you wish to offer Apple feedback, you can do so here: http://www.apple.com/feedback/
As for your suggestion, as much as I can understand what you are requesting, if the device is turned off, it is off. There isn't anything Apple or your carrier can do about that. Having a device that is OFF continue to send a signal suggest all sorts of privacy and battery management issues.

Fiber switch xserve raid

Hi I have recently redone my home office. However the one issue that I did not account for was expandibility of the Xserve Raid in my topology. I currently have a single fiber link from my Mac Pro to my Array. I want now to utilize both channels of my Raid Array and the additional 2 channels of a Raid that I recently purchased. I would presume the answer would be a fiber switch with at least 5 ports, however was hoping someone with more experience could validate my opinion as well as recommend a CHEAP (AKA eBay) solution for me to accomplish this.

I think what i have not made clear is I wired fiber in my walls, and only have a single port where my Mac Pro is located. So I would like to move my 2 Raids to another room in a xRack, and run a single fiber cable from the matching port to a Fiber switch and then extend it to the 4 fiber ports on the Raids.
So visually,
                                                  RAID Port2
                                                       |
                                                       |
MACPRO -------Fiber---SWITCH-------RAID Port1
                                                  |    \
                                                  |      \
                                              Port3     \
                                                           Raid Port 4
Hopefully that comes out properly, but I think explains my issue. Not sure a 4 port card would help except have 3 additional ports.

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

keep getting this error:
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
I've also tried in IE and got this page can not be displayed.
Cleared cache, deleted cookies.
I'm trying to access grrlzrock.com I was using it about an hour ago, and now it doesn't work. any idea?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Repair request for Delta load? Orders missing in Billing line Items

Hi
I am using BW 3.5; Some Orders are missing in BW for Billing line item reports (2LIS_13_VDITM) according to the users.
The report is based on Cube directly, ODS is not used. I planned to do a repair full request for this month's data so as to get the missing orders.
Could you please advice me on correct procedure to do that? Delta loads runs every day and todays delta is completed.
Thanks and BR
P.B

While it's usually recommended to execute setups during "quiet time", it's not required. Especially in this case. Since you're going to be restricting the setup to only extract a range of Billing Documents that are representative of the dates of data missing (or purely the identified missing documents), there is no need to wait for "quiet time" because you'll pick up the data either in your Full Repair extract or in the delta extract. Depending on how the target InfoProvider for this data is setup (cumulative v. non-cumulative), you may have to look out for duplicate data.
My recommendation would be to run your setup for only those documents that have been identified as missing. That way, you're limiting the amount of data that's required to be extracted to the setup table and then into BW, but also will remove any risk of duplicate data in your target InfoProviders.

Request for too much memory???

I get an error message
Request for too much memory, will hang forever.
That sounds like a long time. Will it's still hanging. Any ideas?

The DOM does take up some memory if you use it, but if you're just parsing that XML doc on startup and storing the values you want to add to each session, I'd argue that it's not a problem. Do it in the servlet init() method once and for all and store the values you want. You don't have to use DOM to manage that - do it with SAX and don't create and store a DOM tree if you're that worried about it.
(68KB for the XML doc + DOM memory overhead) * 50 users = ?
Do an experiment and find out exactly how much memory you're talking about. Compare that to the amount of memory you'll have available and see how many users it'll be a problem for. Don't go by hearsay - I'd recommend a scientific approach. Measure it and decide for yourself. - MOD

Request for sample reports developed using report designer

Hi All,
Request for sample reports developed using report designer.
Thanks

Ramesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel

NPS: Event 6274 - Network Policy Server discarded the request for a user

Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2/05/2014 8:47:58 a.m.
Event ID:      6274
Task Category: Network Policy Server
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID:   NULL SID
Account Name:   host/DPC0387.domain.local
Account Domain:   DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID:   NULL SID
Account Name:   -
Fully Qualified Account Name: -
OS-Version:   -
Called Station Identifier:  3c-xx-xx-xx-xx-xx
Calling Station Identifier:  00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address:  10.nnn.nnn.nnn
NAS IPv6 Address:  -
NAS Identifier:   ND246
NAS Port-Type:   Ethernet
NAS Port:   71RADIUS Client:
Client Friendly Name:  Network Device Management Subnet
Client IP Address:   10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name:  -
Authentication Provider:  Windows
Authentication Server:  NT147.domain.local
Authentication Type:  -
EAP Type:   -
Account Session Identifier:  384F322E317838316564303034313030306230666632
Reason Code:   1
Reason:    An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No.     Time        Source                Destination           Protocol Length Time from request Info
      1 0.000000    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
      2 2.470423    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
      3 2.472870    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
      4 2.539416    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
      5 2.544206    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
      6 2.548804    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
      7 2.550050    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
      8 2.552597    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=249, l=208)
      9 2.556043    10.NPS_Server         10.switch             RADIUS   136    0.003446000       Access-Challenge(11) (id=249, l=90)
     10 2.565876    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Protected EAP (EAP-PEAP)
     11 2.569472    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=250, l=208)
     12 2.572566    10.NPS_Server         10.switch             RADIUS   136    0.003094000       Access-Challenge(11) (id=250, l=90)
     13 2.580254    Universa_xx:xx:xx     Nearest               TLSv1    123                      Client Hello
     14 2.586544    10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
     15 4.564841    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
     16 4.568530    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
     17 4.569876    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
     18 4.582263    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=252, l=208)
     19 4.586006    10.NPS_Server         10.switch             RADIUS   136    0.003743000       Access-Challenge(11) (id=252, l=90)
     20 4.591896    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Protected EAP (EAP-PEAP)
     21 4.592692    Universa_xx:xx:xx     Nearest               TLSv1    123                      Client Hello
     22 4.599634    10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=253, l=315)
     23 4.600887    10.NPS_Server         10.switch             IPv4     1518                     Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
     24 4.609920    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    1514                     Server Hello, Certificate, Certificate Request, Server Hello Done
     25 4.610516    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Protected EAP (EAP-PEAP)
     26 4.617407    10.switch             10.NPS_Server         RADIUS   262                      Access-Request(1) (id=254, l=216)
     27 4.618352    10.NPS_Server         10.switch             RADIUS   288    0.000945000       Access-Challenge(11) (id=254, l=242)
     28 4.623650    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    176                      Server Hello, Certificate, Certificate Request, Server Hello Done
     29 4.643316    Universa_xx:xx:xx     Nearest               TLSv1    361                      Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
     30 4.649607    10.switch             10.NPS_Server         RADIUS   601                      Access-Request(1) (id=255, l=555)
     31 4.656950    10.NPS_Server         10.switch             RADIUS   199    0.007343000       Access-Challenge(11) (id=255, l=153)
     32 4.662734    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    87                       Change Cipher Spec, Encrypted Handshake Message
     33 4.681106    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Protected EAP (EAP-PEAP)
     34 4.788536    10.switch             10.NPS_Server         RADIUS   262                      Access-Request(1) (id=2, l=216)
     35 4.789735    10.NPS_Server         10.switch             RADIUS   173    0.001199000       Access-Challenge(11) (id=2, l=127)
     36 4.795723    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    61                       Application Data
     37 4.796372    Universa_xx:xx:xx     Nearest               TLSv1    93                       Application Data
     38 4.802368    10.switch             10.NPS_Server         RADIUS   331                      Access-Request(1) (id=3, l=285)
     39 4.803363    10.NPS_Server         10.switch             RADIUS   189    0.000995000       Access-Challenge(11) (id=3, l=143)
     40 4.808905    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
     41 4.809501    Universa_xx:xx:xx     Nearest               TLSv1    77                       Application Data
     42 4.817342    10.switch             10.NPS_Server         RADIUS   315                      Access-Request(1) (id=4, l=269)
     43 4.822986    10.NPS_Server         10.switch             RADIUS   189    0.005644000       Access-Challenge(11) (id=4, l=143)
     44 4.828973    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
     45 4.833318    Universa_xx:xx:xx     Nearest               TLSv1    829                      Application Data
     46 4.840610    10.switch             10.NPS_Server         RADIUS   1073                     Access-Request(1) (id=5, l=1027)
     47 4.845946    10.NPS_Server         10.switch             RADIUS   189    0.005336000       Access-Challenge(11) (id=5, l=143)
     48 4.850938    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
     49 4.907924    Universa_xx:xx:xx     Nearest               TLSv1    141                      Application Data
     50 4.913390    10.switch             10.NPS_Server         RADIUS   379                      Access-Request(1) (id=6, l=333)
     51 4.917535    10.NPS_Server         10.switch             RADIUS   221    0.004145000       Access-Challenge(11) (id=6, l=175)
     52 4.922877    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    109                      Application Data
     53 4.923472    Universa_xx:xx:xx     Nearest               TLSv1    61                       Application Data
     54 4.930319    10.switch             10.NPS_Server         RADIUS   299                      Access-Request(1) (id=7, l=253)
     55 4.937348    10.NPS_Server         10.switch             RADIUS   381    0.007029000       Access-Challenge(11) (id=7, l=335)
     56 4.942543    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    269                      Application Data
     57 4.944791    Universa_xx:xx:xx     Nearest               TLSv1    125                      Application Data
     58 4.951408    10.switch             10.NPS_Server         RADIUS   363                      Access-Request(1) (id=8, l=317)
     59 4.954022    10.NPS_Server         10.switch             RADIUS   355    0.002614000       Access-Accept(2) (id=8, l=309)
     60 4.981482    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Success
     61 32.590347   10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
     62 62.592420   10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
     63 92.595043   10.switch             10.NPS_Backup_Server RADIUS   361                      Access-Request(1) (id=9, l=315)
     64 122.597856 10.switch             10.NPS_Backup_Server RADIUS   361                      Access-Request(1) (id=9, l=315)
     65 152.600618 10.switch             10.NPS_Backup_Server RADIUS   361                      Access-Request(1) (id=9, l=315)

A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012?

Feature Requests for next version of Pr

I've submitted this list. If you agree, please join me. Copy and paste into the Feature Request page if you like. Add your own requests.
AUDIO:
Ability to save track or clip based audio effect user presets.
Option-drag to copy an audio effect from one insert location to another (to different tracks)
Drag audio effects up or down in the effect stack order, or to another track
Temporary Snap on or off (Reverse Snap Behavior) keyboard modifier.
KEYBOARD / SHORTCUTS:
Ability to map multiple Keyboard Shortcuts to the same function (like Avid: E & R keys, same as I and O)
Ability to print the Keyboard Shortcuts, or save all of them as a text file.
TIMELINE:
More obvious indicator that Timeline Snap is on.
Indicator on Clips in the Timeline that indicate Frame Blend is enabled.
Ripple Sequence and Chapter Markers.
Ripple Audio Track Keyframes.
Solo video layer button on the Timeline track panel.
Constrain clip time movement between tracks by holding shift key, just like all other applications.
FX button/switch, as in After Effects, to turn off all effects on a track (video and audio).
Option-double click a nest to reveal contents of nest in the same master timeline.
SOURCE AND PROGRAM PANES:
Keyboard shortcuts to scale image zoom in Source and Program tabs.
Keyboard shortcuts to increase or decrease playback resolution.
Have the Program monitor remember the Zoom and Resolution level for each Sequence; don't have Zoom scale set universally by the project.
VIDEO EFFECTS:
Make ALL effects Accelerated, YUV, 32-bit. Allow Third Party effects to be accelerated!
Ability to save user/custom transition presets.
In Effects tab, press Tab button to jump to next effect parameter (as in After Effects)
Feathering and invert on Garbage Mattes
A Track Matte function that allows us to pan and scale the clip being matted without affecting the matte size or position. You could do this with a Stencil / Silhouette Alpha / Luma Blend mode as in Ae.
MISC:
When using Clip > Scale to Sequence, DO NOT have the new Scale factor in the Motion tab change the clip's scale to 100%.
Consistent Mouse Wheel behavior across all apps in CS
Scopes update while playing.
Make Export and Title windows return to the previously adjusted size and placement.
Add a command buffer, so that we can execute several commands in a row, and not wait for the app to "release", or for the first event to complete before I can proceed to the next event.
File requests here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

If you want to do this correctly you need to file a request for each feature.
Ripple Sequence and Chapter Markers is already implemented. Sequence markers are the same as chapter markers, yes? (Ripple Sequence Markers, select Marker > Ripple Sequence Markers.)
Ability to print the Keyboard Shortcuts, or save all of them as a text file. also available. (hold ctrl+shift while opening. A button with clipboard appears)
Keyboard shortcuts to scale image zoom in Source and Program tabs. available
Keyboard shortcuts to increase or decrease playback resolution. available
Make Export and Title windows return to the previously adjusted size and placement. They do.
Some feature you posted are great. How about a eyedropper tool for the Color Matte?
I find the Magnet for Snap quite visible. There is also this feature in the Pref to make the playhead snap.

Request for some Visual Basic code?

Hello not sure if I'm posting in the correct area but I have a request for some Visual Basic Code.
I use a particular document in word quite often to fill out forms for my job. However I would like something that allows me to open a new instance of the same document while closing the current AFTER I print it without any extra mouse clicks, or if after
I print the document the forms are cleared and I can start over.
P.S. I would take the time to learn how to do it myself but I currently reside in South Korea and work for the USAF so I don't have much time.

Hi,
I suggest you post the request to Word for Developers forum since it needs support for coding:
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=worddev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support

Need a Statement of Volatility for HP Switch JE006A

Need a Statement of Volatility for HP Switch JE006A

Hi:
This is a consumer to consumer forum.
HP only monitors this forum for compliance with the forum rules of conduct.
I recommend you post your question on the HP Business support forum -- Switching section (maybe an end user there knows how you get what you need), or call HP technical support for the country you live in to obtain the info you need.
http://h30499.www3.hp.com/t5/Switching-and-Routing/ct-p/switching

How to enable password request for restart and shutdown?

Hi,
I'm neither a Linux nor an Arch Linux newbie, but inexperienced regarding this particular issue.
I want to enable password request for restart and shutdown and want to know if I'm mistaken, because trial and error might become to time-consuming while working on a project.
I read https://wiki.archlinux.org/index.php/Al … o_shutdown.
$ ls -hAl /usr/bin/shutdown
lrwxrwxrwx 1 root root 9 Apr 22 03:02 /usr/bin/shutdown -> systemctl
If I try to run $ shutdown -hP 28 or $ shutdown -c nothings happens, I need to run $ sudo shutdown -hP 28 and $ sudo shutdown -c and type a password. That's the way I want it.
If I e.g. run $ shutdown -r now no password is needed. I want to disable this. It should behave the same way as shutdown -hP/-c behave. I want to type
$ sudo shutdown -r now or $ sudo systemctl reboot etc. and then the password should be required.
$ sudo grep -vn "#" /etc/sudoers | grep [[:blank:]]
72:root ALL=(ALL) ALL
73:rocketmouse ALL=(ALL) ALL
The user "rocketmouse" should have all permissions after typing a password, but not without typing the password.
IIUC what's written at https://wiki.archlinux.org/index.php/Polkit, I need to edit
$ pkaction | grep login
org.freedesktop.accounts.set-login-option
org.freedesktop.login1.attach-device
org.freedesktop.login1.flush-devices
org.freedesktop.login1.hibernate
org.freedesktop.login1.hibernate-ignore-inhibit
org.freedesktop.login1.hibernate-multiple-sessions
org.freedesktop.login1.inhibit-block-idle
org.freedesktop.login1.inhibit-block-shutdown
org.freedesktop.login1.inhibit-block-sleep
org.freedesktop.login1.inhibit-delay-shutdown
org.freedesktop.login1.inhibit-delay-sleep
org.freedesktop.login1.inhibit-handle-hibernate-key
org.freedesktop.login1.inhibit-handle-lid-switch
org.freedesktop.login1.inhibit-handle-power-key
org.freedesktop.login1.inhibit-handle-suspend-key
org.freedesktop.login1.power-off
org.freedesktop.login1.power-off-ignore-inhibit
org.freedesktop.login1.power-off-multiple-sessions
org.freedesktop.login1.reboot
org.freedesktop.login1.reboot-ignore-inhibit
org.freedesktop.login1.reboot-multiple-sessions
org.freedesktop.login1.set-user-linger
org.freedesktop.login1.suspend
org.freedesktop.login1.suspend-ignore-inhibit
org.freedesktop.login1.suspend-multiple-sessions
org.freedesktop.machine1.login
IOW I need to replace every yes and no etc. with auth_admin in $ grep -v lang /usr/share/polkit-1/actions/org.freedesktop.login1.policy.
Am I mistaken?
Regards,
Ralf

You'll need to create a rules file which uses javascript.
https://wiki.archlinux.org/index.php/Po … tion_rules
// /etc/polkit-1/rules.d/10-admin-shutdown-reboot.rules
polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.login1.power-off" ||
action.id == "org.freedesktop.login1.power-off-ignore-inhibit" ||
/*...SOME_MORE_IDS_HERE...*/
// return polkit.Result.AUTH_ADMIN_KEEP;
return polkit.Result.AUTH_SELF_KEEP;
Last edited by progandy (2015-06-21 17:42:35)

Request for Fiber Switch Recommendation

Similar Messages

Maybe you are looking for