Request for help with apex page popup on button press.

Apex 3.2/Solaris 10
I'm attempting to open an apex page (report) in a popup window when a button is pressed following the plethora of examples in the forum.
I've applied the following in "Edit Page Buttons" to either of "Button Attributes" and "URL Target" trying to open my report (page 14) in a popup window.
javascript.popupURL('f?p=&APP_ID.:14:&SESSION.');
javascript.popup2('f?p=&APP_ID.:14:&SESSION.');
window.open('f?p=&APP_ID.:14:&SESSION.');
I've also implemented the conditional branch for this button to alleviate the "page not found - restart application" error.
The window.open variant does not work. The 2 javascript. variants open the page, but in the same window (no popup).
also I've read that in order to close my pop up report (should it be working), a window.close(); should be issued somehow associated with a close button on the popup page. Specifically, where would this code be placed?
Thank you!
Paul

Paul:
Specify the URL as
javascript:popupURL('f?p=&APP_ID.:14:&SESSION.');
instead of
javascript.popupURL('f?p=&APP_ID.:14:&SESSION.');
Varad

Similar Messages

  • [Megaworks 5.1 THX 550] Request for help with broken sub!

    Help!
    Just the other day my Megaworks began producing a loud low level buzz when switched on they had been working fine the previous day, but when I switched them on the next day instantly the made this unbearable low level noise.
    After much investigation I discovered that the centre and sub channels seem to be screwed in the sub itself. Trying various cable/soundcard/speaker combinations verified that it is indeed the sub itself at fault, rather than any other component.
    The current situation is that any activity on the sub channel will produce an intolerable sound which plays at a volume ignorant of the settings on the volume control. Nothing plays through the centre speaker at all any more. Unplugging the sub/centre channel fixes the problem sometimes, but often it reappears after a short time even with the channel unplugged. Once the sound starts the only way to stop it is to power down the speakers (via the remote or via the power switch) or plug in the headphones. Also using the volume control causes audible 'clicks' to be heard, which were not there previously.
    Note that the headphone pass-through on the remote still functions perfectly (volume control at well), but I assume that is on entirely different circuitry.
    My best guess is that some electricity spike (when switching on the unit) fried a component, or perhaps the extreme cold we've had here messed it up, but I aint no expert!
    Questions then:
    1. Given it'ss out of warranty, does anyone have any suggestions as to what could be the cause. Or rather what I could do to fix it's (I'm fairly handy with a soldering iron, and happy to get my hands dirty!)
    2. Otherwise what are the chances of a repair shop being able to do anything with it's Are there such things as Creative approved repair shops (in Scotland)? Would it likely cost a packet?
    3. Failing that, is it possible to purchase only a sub as a spare? I don't have the money right now to replace the whole lot with something similarly spec'd but may be able to stretch to a spare.
    I know it'ss a bit of me clutching at straws here, but any help/suggestions gratefully received! I so don't want to lose my pride and joy and have to make do with some poor alternative.
    (Apologies for the length of the post I wanted to try and cover all bases!)

    yes u can i think.. should b alright.. you have a good amp man!

  • Request for help with oracle statistics

    Hi,
    I am about to migrate 8.0.6.0(32 bit) database to 10.2.0.4(64 bit) on windows 2008 standard R2 SP1. I would like to ask few questions regarding Statistics collection.
    1) For the first time after upgrade, do i need to collect statistics for whole database including sys,system users.
    2) I have few tables which are very huge and often updated. Do i need to collect statistics only for these highly updated/modified tables?
    3) How often do i need to collect statistics.
    4) Any precautions to be taken during statistics collection job.
    5) Need a script to run statistics. Is it recommended to use Oracle Enterprise to run the statistics job?
    Best Regards,

    Hi,
    1) if your stats are up-to-date before the upgrade, then it's not necessary to gather them immediately after the upgrade. Also, you should worry about stats for your application schema(s), Oracle mostly uses dynamic sampling or hard-coded plans for running recursive SQL
    2) you should update stats where table properties (first of all, number of rows) change enough to make old plans inefficient. It's quite hard to make this decision for each table individually, so people typically either gather schema for all tables once a week, or use the default stats job that update table stats when it's size changes by 10%. If you have volatile tables, then you may set up individual stats job for them, or you can set stats manually and lock them to prevent schema-level jobs from overwriting them
    3) this depends entirely on your application. If your tables don't change, you don't have to gather stats at all. If they change fast, you may have to gather stats every day or even more often. A typical period for many applications is 1 week, but your may be different
    4) be careful with histograms: by default, Oracle 10g+ uses method_opt=>'... size auto' which means that the number of bins is calculated by Oracle based on data distributions, table usage etc. This may mean that one week a histogram gets collected, another week it's not (even without any significant changes in the data). If you want to ensure plan stability on your key application tables, you can configure manual stats jobs for them, specifying how many histogram bins you want for each (specify 1 if you don't want a histogram at all)
    5) you don't really need a script, it's just a procedure call (dbms_stats.gather_schema_stats). You can google for some examples, but exact choice of parameters depends on your application.
    Best regards,
    Nikolay

  • One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

    one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
    TY

    The History menu can only show that fixed maximum of 15 as that is hard coded.
    Maybe this extension helps:
    *History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

  • Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min.  EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST  Click the [Support] links for help with non-Apple products

    Problem description:
    My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
    EtreCheck version: 2.1.5 (108)
    Report generated December 27, 2014 at 9:15:58 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HD (disk1) /  [Startup]: 498.88 GB (5.04 GB free) (Low!)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
    Problem System Launch Agents: ℹ️
      [killed] com.apple.CallHistoryPluginHelper.plist
      [killed] com.apple.coreservices.appleid.authentication.plist
      [killed] com.apple.icloud.fmfd.plist
      [killed] com.apple.telephonyutilities.callservicesd.plist
      4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
      [killed] com.apple.ctkd.plist
      [killed] com.apple.icloud.findmydeviced.plist
      [killed] com.apple.ifdreader.plist
      [killed] com.apple.nehelper.plist
      [killed] com.apple.wdhelper.plist
      [running] com.seagate.TBDecorator.plist [Support]
      5 processes killed due to memory pressure
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
      [running] com.carbonite.launchd.carbonitestatus.plist [Support]
      [loaded] com.coupons.coupond.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
      [loaded] com.trendmicro.itis.dca.plist [Support]
      [running] com.trendmicro.itis.uimgmt.agent.plist [Support]
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist [Support]
      [running] com.carbonite.launchd.carbonitedaemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.trendmicro.icore.av.plist [Support]
      [running] com.trendmicro.icore.main.plist [Support]
      [running] com.trendmicro.icore.wp.plist [Support]
      [running] com.trendmicro.itis.plugin.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
      [invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
      [loaded] com.trendmicro.itis.uninstaller.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
      WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
      CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    User internet Plug-ins: ℹ️
      npBcsMcTcIO: Version: Unknown [Support]
    Safari Extensions: ℹ️
      Trend Micro Toolbar [Installed]
    3rd Party Preference Panes: ℹ️
      Carbonite  [Support]
      Flash Player  [Support]
      Paragon NTFS for Mac ® OS X  [Support]
      Seagate Dashboard for Mac OSX  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      HD: Disk size: 498.88 GB Disk used: 493.84 GB
      Destinations:
      Jens Seagate Backup [Local]
      Total size: 999.86 GB
      Total number of backups: 6
      Oldest backup: 2014-06-24 10:33:56 +0000
      Last backup: 2014-12-17 17:14:18 +0000
      Size of backup disk: Too small
      Backup size 999.86 GB < (Disk used 493.84 GB X 3)
      My Passport for Mac [Local]
      Total size: 2.00 TB
      Total number of backups: 14
      Oldest backup: 2013-08-21 19:19:35 +0000
      Last backup: 2014-12-19 11:44:23 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          6% coreaudiod
          5% CarboniteDaemon
          4% iMovie
          3% JustCloud
          3% Wondershare Player
    Top Processes by Memory: ℹ️
      335 MB iPhoto Library Manager
      180 MB Finder
      142 MB iMovie
      70 MB Preview
      51 MB Microsoft Word
    Virtual Memory Information: ℹ️
      149 MB Free RAM
      1.04 GB Active RAM
      897 MB Inactive RAM
      1.17 GB Wired RAM
      30.53 GB Page-ins
      1.42 GB Page-outs
    Diagnostics Information: ℹ️
      Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
      Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
      Dec 26, 2014, 02:22:01 PM Self test - passed
      Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

    You have nearly run out of disk space.  Either purchase a larger one or start cleaning out the one you have?

  • How can I get iTunes to answer my requests for help?

    I have tried for a few days now to get iTunes to help me get some tunes that partially downloaded. Their initial response seemed to work but the next day the tunes were only partially on my PC. I re-installed the software, called the phone number on my PayPal receipt, sent another e-mail request for help, responded to their follow up e-mail a few days ago asking if my issue was resolved.........and STILL cannot get them to help me resolve. They say I should receive a response within 24 hours, and it has been longer. No phone number to call, the initial instructions to re-download the missing tunes were confusing  

    It is quite easy to find out how to redownload purchases, using the search bar ( by Support) at the top of this page:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You can contact itunes support again by clicking Support at the top of the page, then clicking the link under Contact Us.

  • EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT  Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

    My Mac is very slow and applications take a long time to load, especially Safari and iTunes.  Please help.    I have run the Etrecheck report and these are results.
    Thanks Pat
    EtreCheck version: 2.1.5 (108)
    Report generated 4 January 2015 14:29:26 GMT
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (21.5-inch, Mid 2011) (Verified)
      iMac - model: iMac12,1
      1 2.7 GHz Intel Core i5 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:32:50
    Disk Information: ℹ️
      ST31000528AS disk0 : (1 TB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5690H 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Seagate Expansion Desk 2 TB
      EFI (disk1s1) <not mounted> : 210 MB
      Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. iPhone
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
    Problem System Launch Agents: ℹ️
      [failed] com.apple.syncservices.SyncServer.plist
    Launch Agents: ℹ️
      [loaded] com.avast.userinit.plist [Support]
      [running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
      [loaded] com.epson.esua.launcher.plist [Support]
      [running] com.epson.eventmanager.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.trusteer.rapport.rapportd.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.avast.init.plist [Support]
      [loaded] com.avast.uninstall.plist [Support]
      [failed] com.avast.update.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [running] com.trusteer.rooks.rooksd.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.avast.home.userinit.plist [Support]
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 2.2 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      OVSHelper: Version: 1.1 [Support]
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: Java 8 Update 25 Check version
    Safari Extensions: ℹ️
      wrc [Installed]
    3rd Party Preference Panes: ℹ️
      DivX  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoToMyPC Preferences  [Support]
      Java  [Support]
      Trusteer Endpoint Protection  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
      Destinations:
      Seagate Expansion Drive [Local]
      Total size: 2.00 TB
      Total number of backups: 78
      Oldest backup: 2013-07-28 18:09:06 +0000
      Last backup: 2015-01-04 14:29:38 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 281.84 GB X 3)
    Top Processes by CPU: ℹ️
          2% WindowServer
          1% mds
          0% fontd
          0% mds_stores
          0% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB Safari
      112 MB com.avast.daemon
      94 MB com.apple.WebKit.WebContent
      56 MB spindump
      52 MB mds_stores
    Virtual Memory Information: ℹ️
      479 MB Free RAM
      1.56 GB Active RAM
      1.11 GB Inactive RAM
      904 MB Wired RAM
      5.37 GB Page-ins
      75 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 4, 2015, 01:57:18 PM Self test - passed
      Standard users cannot read /Library/Logs/DiagnosticReports.
      Run as an administrator account to see more information.

    patbythesea wrote:
    Can I assume that with my Mac I do not need any additional virus protection software?  If I do, what should I use?
    See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Credit request for license# with PO# ubmitted by the partner is in status

    Hi All
    Please help :----
    The credit request for license# with PO# ubmitted by the partner is in status Closed on retrun tool, however the Credit note was not issued.
    What can be the reason....
    Thanks
    Yash

    NA

  • Help with home page link

    Hi
    Does anyone can help me ?
    I created a web and now I am creating a second folder/ file. How can I link this second folder to the home page placed in first folder ?
    Sorry for my English

    Hi Cari
    Tanhks for you help.  This open my mind, you mean  I need to have two website to this ?
    I ask you this because I have only one website. the acces to my site is only through customer site. I mean I give him the right link  (one link for Company A and another link for company B, both coming from site), do you understand what I mean?
    The point I do not understan is if I save file web A, as  Web B and then I change page names, master and so on, and the I up load, why does muse overwrite in file A when pages are different name !!!!
    The point is Muse does not allow to copy / paste !!!
    Any idea Cari
    Regards from Buenos Aires
    Felix Cano Montoya
    [email protected]
    El 11/4/2015, a las 23:21, Cari Jansen <[email protected]> escribió:
    Help with home page link
    created by Cari Jansen <https://forums.adobe.com/people/Cari+Jansen> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7430081#7430081>
    I'm not sure I've got a grasp on the issue you are having but let me give it a try
    Website A is finished and you have uploaded it to the Internet, so it is LIVE.
    You make a copy of Website A, and call it Website B, then make all required changes.
    IF you uploaded Website B, then it is likely you will overwrite Website A. You must instead, upload Website B as a separate Website.
    To publish to a new site:
    Click Publish.
    Then click the expansion triangle left of Options.
    Change Publish To setting to New Site
    fill out rest of required details, and click OK to publish.
    You'll now have two separate web-sites.
    If you need to link between them, use absolute hyperlinks (the full URL).
    Hope this helps.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7430081#7430081 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7430081#7430081
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Transport request for Help LaunchPad : K900033.N73

    Dear friends,
    Can anyone please tell me where to find transport request for Help LaunchPad K900033.N73 ?
    (We had raised a OSS 161317/2014 and this has been recommended by Shu Liu )
    We have SAP System with SAP_BASIS 740.
    I tried to work with SAP Note1799002 - How to choose Help LaunchPad files from uPerform Installation PackageI .. but did not managed to find this.
    best regards
    ashish

    Hi Anish,
    Sorry for delay.
    I see that Ancile have answered your question. Hopefully this is to your satisfaction.
    Regards,
    Matthew

  • Approximately 6% of all requests for help on this forum are ever "solved."

    Approximately 6% of all requests for help on this forum are ever "solved." And approximately 34% of all requests for help on this forum are never responded to. Even with all the caveats, these numbers are embarrassing. Good luck everyone!

    More facts and stats from the horse's mouth - http://www.mozilla.org/foundation/annualreport/2009/sustainability.html
    "Total assets as of December 31, 2009 were $143 million compared with $116 million at the end of 2008, an increase of 23 percent. Unrestricted net assets at the end of 2009 were $120 million compared with $94 million in 2008, a 28 percent increase."
    "Mozilla consolidated expenses for 2009 were $61 million, up approximately 26 percent from 2008 expenses of $49 million. Mozilla operating expenses in 2009 continued to remain highly focused on people and infrastructure."
    "At the end of 2009, Mozilla was funding approximately 250 people working around the world."
    Yes, Mozilla is indeed doing very well but they're a bit worried about the IRS audit that is currently going on.
    Now, if we take the figure from the 2008 cnet article that 80% of expenses are spent on Mozilla employees as a relatively stable benchmark for 2009, we see that employee salaries averaged out to around $200,000 dollars annually for each employee, which obviously isn't what each employee is actually getting paid, but what it does mean is that given typical corporate scaling of salaries, some folks in this non-profit are making lots and lots of money.
    The individuals who should be the most upset about Mozilla's unwillingness to invest even a fraction of its profits into building a real and responsive user support system are the collective-community-driven-volunteers who commit their free time so Mozilla can continue to cash in big time at their expense. A brilliant model!
    Again, Firefox users appreciate the work that you and the other unpaid/unacknowledged volunteers do here.... Mozilla appreciates it more.

  • Looking for Help with Hyperion to JAVA

    I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

    Hi,
    From your description, you want to achieve the following goal:
    Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
    Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

    Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
    Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
    Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
    is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
    Any help is appreicated!
    Thanks

    Hi,
    From your description, you want to achieve the following goal:
    Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
    Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • A Request for help from me again! Yay!

    hi guys! I was working on implementing threads for the directions of the unit. When i press forward once...nothing happens, but when i press twice it gives me this HUGE list of errors. I dont have a clue. Again, any help would be appreciated.
    import javax.swing.*;
    import java.awt.event.*;
    import java.awt.*;
    public class NBoard extends JFrame implements KeyListener{
         int selection = 0;
         boolean selectionmade = false;
         final int WIDTH = 600;
         final int HEIGHT = 600;
         Image Viz =Toolkit.getDefaultToolkit().getImage(JOptionPane.showInputDialog("What character do you want?")+".gif");
         int XC = 50;
         int YC = 50;
         Thread moving = new Move();
         Unit Host = new Unit();
         public NBoard(){
              this.setSize(WIDTH,HEIGHT);
              selection = Integer.parseInt(JOptionPane.showInputDialog("What level design do you want?"));
              if(selection > 0){
                   selectionmade = true;
              addKeyListener(this);
              this.setVisible(true);
         public static void main(String args[]){
              new NBoard();
         public void paint(Graphics g){
              if(selectionmade == true){
                   if(selection == 1){
                        g.setColor(Color.white);
                        g.fillRect(0,0,WIDTH,HEIGHT);
                        g.setColor(Color.black);
                        g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
                   if(selection == 2){
                        g.setColor(Color.white);
                        g.fillRect(0,0,WIDTH,HEIGHT);
                        g.setColor(Color.black);
                        g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
                        for(int ctr = 1; ctr < 6; ++ctr){
                             g.drawRect(WIDTH/4 ,ctr * 100, 20, 20);
                             g.drawRect((WIDTH / 3) * 2 ,ctr * 100, 20, 20);
                   if(selection == 3){
                        g.setColor(Color.white);
                        g.fillRect(0,0,WIDTH,HEIGHT);
                        g.setColor(Color.black);
                        g.drawLine((WIDTH/2) - 90,0,(WIDTH/2) + 90,HEIGHT);
                   g.drawImage(Viz,XC,YC,this);
              public void keyPressed(KeyEvent e){                              //The Problem Areas
                   if(e.getKeyChar() == 'w'){
                        moving.start();                                             //Starting the thread to move up
                   else if(e.getKeyChar() == 's'){
                        YC = YC + 2;
                   else if(e.getKeyChar() == 'a'){
                        XC = XC - 2;
                   else if(e.getKeyChar() == 'd'){
                        XC = XC + 2;
                   System.out.println(e.getKeyChar());
                   repaint();
         public void keyReleased(KeyEvent e){                              //The Problem Areas
              if(e.getKeyChar() == 'w'){
                   moving.interrupt();                                             //Trying to interrupt the thread once the key is released
         public void keyTyped(KeyEvent e){}
    class Move extends Thread{                                                  //The Problem Areas
         public void run(){                                                       //The Thread
              Unit.XC = Unit.XC - 2;
              try{
                   Thread.sleep(1000);
              catch (Exception e){}
    class Unit{                                                                      //The Object which will hold all of the information about each unit
         static int XC = 30;
         static int YC = 30;
    } By the way, here is my order of events, so you can look forward to seeing requests for help for them (hopefully not).
    Threads: Moving the guy around
    Threads: Making him shoot a ball at the mouses position
    Network: Allow others to join/play game (This is gonna be HUGE probably), while host decides on game type.
    Thanks for all the help so far!

    Where does moving ever get started? Why does Move extend Thread instead of implementing Runnable? (Implementing runnable is preferred and often the correct way to do it and it is in this case)
    But regardless there shoud be a moving.start() somewhere or start of the Thread that has the Runnable target Move.... I don't think I see one. Unless I missed it.
    so...itll work if i change the setup to Runnable?

  • Even I cant believe this is happening again! i'm once again asking for help with my account.  Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

    Even I cant believe this is happening again! i'm once again asking for help with my account.  Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

    I guess I spoke too soon!  I really can't believe this nightmare is not over yet! My account is still wrong.  The credit that I was due totaled $63.00  I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72.  I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible?  None of the late fees were credited and the amount due for my monthly charges are wrong.  Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20.  The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money.  I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change!  I lost money once again due to the verizon rep's.  so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account.  Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end!  I need real help!
    >> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

Maybe you are looking for

  • Very slow responce when working with Office file on DFS-Share

    Very slow responce when working with Office file on DFS-Share We have implemented the following configuration Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder ta

  • Music Channels not working?

    Music Channels are not working in Maryland.  They are listed in the guide, but no video or audio in the 1800 channel series...  any ideas why?

  • Downgrading to 3.1.2 and Keeping Contacts

    I've figured out how to downgrade from the OS for my iTouch 2G from 4.0, which gives me loads of grief, to 3.1.2, but is there a way for me to keep my Contacts intact? The only backup that has my all my Contacts is the one 4.0. Thanks for any help. P

  • Infospoke logical file name question

    Experts, We have what seems to be an anomaly that we need to understand. On the application server, when we extract our infospokes, two files are generated , a schema and a data file. the naming convention is like zxxx.infoprovider_date eg. zxxx.info

  • Application Builder Question: how to install several applications in the same computer?

    Hello, I have two LabView applications and its installers, all of them generated with the aplication builder. Both works fine: I can install them in several computers without LabView. But when I try to install both in the same computer, the result is