Request for iPhone 5 with words of wisdom

Respected sir, I recently saw your offer words of wisdom and im really looking forward to it. Can you please give me an option on iPhone 5 as I would like to give iPhone 5 to my lovely dad on the fathers day kindly let me as soon as possible. Thank you

Ralph9430,
He owns iPhone 4s I was planning to gift him iPhone 5 but i also want that words of wisdom to be written on the back of the phone soo bro is it like possible for me to get it done? On iPhone 5 as the company offers only on iPod and iPads

Similar Messages

Credit request for license# with PO# ubmitted by the partner is in status

Hi All
Please help :----
The credit request for license# with PO# ubmitted by the partner is in status Closed on retrun tool, however the Credit note was not issued.
What can be the reason....
Thanks
Yash

NA

Is there a car charger and fm frequency transmitter for iPhone with IOS6?

is there a car charger and fm frequency transmitter for iPhone with IOS6?

Here is something interesting about car chargers and the iPhone 3G:
From Macworld:
On to the power adapters. Here’s the story: We learned a while back that iPhone 3G doesn’t support charging “via FireWire.” The thing is, there are lots of devices out there that don’t actually have a FireWire port, but are technically FireWire chargers because they’re sending power on the dock-connector pins that were used for power by the FireWire interface. There are a lot of reasons for this, chief among them the fact that the FireWire spec allows as much a 18 volts, while USB is a 5-volt connection. Since cars provide 12 volts of power, many if not most car-chargers used the FireWire method to send power.
However, in the interests of space and simplicity (i.e., not having to engineer for two separate power paths), Apple has dropped support for FireWire charging with the iPhone 3G. This means that many accessories won’t charge an iPhone 3G. Borchers said that Apple gave accessory developers a strong hint that this was going to happen a while ago, but he said that some companies have continued to implement FireWire-based chargers despite the warning.
But there’s some hope in sight: Borchers told me that at least a couple of third parties will be releasing converters that will pass through the dock connection, but convert the power to a USB standard. That adapter may make many of those charging devices come back to life

HT201328 Hello. I sent a request for iphone unlocking:

Hello. I sent a request for iphone unlocking:
Status of your ATT Mobile Device (Phone or Tablet) Unlock request
IMEI Number
012646004628828
Request Date/Time
01/06/2014 10:08 PM
Request Number
6673769
Current Status
ATT Mobile Device Unlock Approved
But I can't still unlock it. I updated iOs, I restored data, but iphone isn't unlocked. On a site http://iphoneimei.info/ phone statute "locked". What shall I do?

Generally when you receive an email from AT&T about an unlock, it will tell you if the phone has been unlocked and then tell you to wait 24 hours before restoring the device to complete the unlock. I'm not sure where you got this screenshot you shown, but if you received the unlock email, then you need to connect the device to iTunes, restore it as new, not from a backup and you should see the message, Congratulations, you iPhone is unlocked, in iTunes. If you restore and do not see that, then you need to contact AT&T.

Downside of developing for iphone with AIR?

I've developed a few games with flash and have wanted to try my hand at some mobile apps. Most of my games are point and clicks and since I already know AS3, AIR seems to be a pretty good option.
I've asked about Android- which I plan on targeting first- and it appears a major downside is that many AIR apps woud require additional software on older phones and that the required software is a bit of a space hog.
What are the downsides for developing for iphone? Does IOS require special software to play AIR apps? Do they run particularly slowly on the iphone?

Whether Flash would be the best tool might depend a lot on whether you know Flash, what kind of game you're doing, and whether all of the features you need to do can be done. For example, if having Game Center and iAds is vital, then you wouldn't want to use Flash for the time being.
Flash based apps on iOS do include the AIR runtime engine, but it isn't an external engine that gets installed once into the system, each app would have a copy of the engine. That's good, in that you don't have to worry whether someone installing a later app might cause your app to stop working. It does mean that each app is a few megabytes bigger download than the Android equivalent.
On Android, the when a user downloads an AIR based app for the first time, they automatically get given the AIR runtime too. After that, any AIR apps that use the runtime that is already on the device only has to download the app itself, unless the app requires a later version of AIR, in which case the user is prompted to download the later version of AIR. It's not too painful a process.
People have requested that the AIR runtime be part of the APK, and I think that will be done one day, but not in the near future.

Jabber for iphone with CUCM 8.5

Hello,
I did the config on the CUCM for my iphone so now jabber on my iphone is connected succesfuly to the CUCM and everythings works well except desk phone intergration, I followed the process below descripted on the Cisco site but cannot understand the step below (underlined)
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#JABI_TK_E9D245B2_00
Step 1
Sign in to the Unified CM Administration portal.
Step 2
Navigate to the device page.
•a. In the Device Information section, click Device Association and search for the desk phone you want to associate with the mobile device.
(here my question is which device they are talking about? We have device profile for each user and we have mobility on our company and we can connect to any phone on our company with our profile, and in our CUCM I cannot find Device information or Device Association field??
•b. Select the device you want to associate with the mobile device, and click Save Selected/Changes.
•c. Navigate back to the End User page.
•d. Ensure that the Allow Control of Device from CTI check box is checked.
•e. Select the primary extension for the desk phone you want to associate with the mobile device.
•f. In the Permissions Information section, add Standard CTI Enabled to the User Groups list.
For 8900 and 9900 series phones, also add Standard CTI Allow Control of Phones supporting Connected Xfer and conf.
•g. Note the user ID of this user for use later in this procedure.
•h. Select Save.
Step 3
Navigate to the Device Information page for the desk phone you want to associate with the mobile device.
•i. Verify that the value for Owner User ID is the correct end user.
•j. Ensure that the Allow Control of Device from CTI check box is checked.
If this option does not appear in the Device Information section of the Phone Configuration window, the phone does not support this feature.
•k. Select Save.
Step 4
Navigate to the Cisco Dual Mode Device for iPhone page.
•l. Verify that the value for Owner User ID is the correct end user.
•m. In the Product Specific Layout Configuration section, for CTI Control Username, enter the user ID from the End User page.
•n. Select Save.
Step 5
Navigate to the Directory Number Information page and verify:
the Allow Control of Device from CTI check box is checked
the Associated Devices box displays the desk phone and the mobile device
Step 6
Restart the mobile device and the desk phone.
Thanks for your help
Bel

Hello,
By 'Use Mobile Network' I am assuming that you want to transfer the VoIP call to GSM using the Mobility Softkey on the iPhone. There are a couple of defects that you should be aware of when using this functionality:
1) CSCtu15500 - Call drop after user handoff VoIP call to mobile using Anyconnect (VPN)
2) CSCty91386 - Client can't handle send-to-mobile message
Workarounds: For the first defect, if you are using AnyConnect (VPN), please try transfer to mobile, with out using VPN. The the second defect, you must use the US English as the User Locale.
HTH,
--Vincent

Down payment request for contract with periodic billing

Hi Friends,
Could anyone help me in understanding the configuration settings for down payment / advance payment senario for a CONTRACT which has Order related billing (I have done for Order with milestone billing plan).
The contract has order related *periodic billing plan* where settlement period is suppose quaterly billing and actual invoice is happening on 1st date of the quarter. But i want to create a down payment request say 10 days before the billing date[(actual invoice(F2) date] of every quater as an advance payment/ down payment.
FYI...
For order i am using standard billing rule 1 in milestone billing plan for final invoice but for downpaymnet billing dates (added additional settlement periods then actual invoice settlement period like 3 adv pay ment og 20%, 30% 50% & one actual invoice period for whole amount 100% as D4 doc only) i am manually changing the billing rule as 4 to create a down payment req.
But in contract as its has periodic billing plan no billing rule changing option (no additional settlement period can be added, only settlement period for actual invoice is getting proposed) so i can't have two different rule for a settlement period. no settlement period can be added separately for adv paymnet/down payment.
Kindly respond ASAP.
Rgds
Manish

Hi, Many thanks for your response.
But the down payment functionality for a SO with milestone billing i have already implemented.
The question was for CONTRACT Side (say rental / service contract). The contract has periodic billing (monthly / Q'ly).
Kindly let me know if you/anyone has any idea for config settings for a contract with the senario mentioned in previous thread post.
Thnx & Rgds
MG

I can't get me Ipod on my Iphone4 to play, it will until an error comes up saying this device is not optimised for iphone, with nothing plugged into it.

My Ipod on my Iphone wont play and I have no volume bar. I can hear when the phone rings and I can hear people talking when they call, it seems to be a software promlem that I dont know how to fix. I have been having this problem and I have realized that when the error comes that this accessory is not optimised for iphone, my Ipod wont work. I have never had the air play button and my software is the current editon.

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Export for iPhone with crop?

I did searchs for iPhone AND crop and iPod AND crop, but nothing came up, so...
Is it possible to use QT to export to iPhone with a custom crop? I'm starting with 1280x720 HD video from a Flip MinoHD. I would like to end up with something in a 3:2 ratio like 480x320 (either cropped to 1080x720 and then scaled or scaled then cropped to 3:2).
I can do this crop if I export to MPEG-4 and it works great. This export option, however, comes out as mp4, instead of m4v and doesn't work on the iPhone.
Any way to do this QT?
How about QT Pro?
Thanks!

Do you have any idea if I'm doing something wrong? Here's an excerpt from my email to the author (I didn't mention cropping as to simplify my question/bug report)
Since you did not describe your actual "crop" work flow for MPEG Stramclip I suspect that is where your problem lies. Basically you are going from a 1.78:1 to a 1.50:1 aspect ration. Therefore your will have to crop the left-right edges and not the top-bottom. Since you indicate want to end up with a 480x320 viewing area, try the following:
1) Select either of the iPhone presets. Since you will have to customize the dimensions, as well as, crop the file, it doesn't matter which preset you choose.
2) Back in the main MPEG-4 export window, re-set the "Other" dimensions to 569x320. What you are in effect doing is setting the target height of the output you want and adjusting the width to the nearest pixel for a 16:9 aspect ratio to match your source file and, thus, minimize any distortion.
3) Set output audio and/or video rates as desired (I normally use 1000 or 1200 Kbps for video and 128 Kbps @ 44.1 KHz for audio) and make any adjustments to brightness, contrast, saturation, volumes, etc. if desired.
4) Now activate the "Cropping" tool by "ticking" the correct box and leave the option in the "Destination" mode.
5) Now enter your left-right crop settings. These setting must total 89 pixels to be subtracted from the 569 scaled pixel width which will leave you with your specified 480x320 viewing area. How much you decide to crop from the left and right sides is up to you but must total 89 pixels. Thus you can keep the center area or chose to offset the viewing area as best suits your needs.
6) Now preview the content to be sure it is exactly what you want and if/when satisfied, select the "Make MP4" button to set up and begin your export.

Belt pouch which is a snug fit for iPhone with the bumper on?

I'm looking for a belt pouch which is exactly the right size for an iPhone with the Apple bumper on. A snug fit would be preferable because it works better when silent mode is on.
Probably a better question is - is there another phone which is the same size as an iPhone with the bumper on? Then I can look at cases designed for that phone.
Thanks for suggestions.
Message was edited by: jthg

I don't know if this is the type you're looking for, but an iPhone 4 with a bumper should fit well in a MOBO horizontal slim case.
http://www.amazon.com/Mobo-Slim-Horizontal-Carrying-Case/dp/B003RD6466/ref=cmcr_pr_producttop
BTW, I bought mine at an AT&T store, but Amazon has them for a lot cheaper. I had a soft plastic case with a back and it fit snugly in the MOBO. I am now using the free acrylic case with a back, because it is easier to out of the MOBO (smoother action).

Jabber for iphone with cucm 10.5

Hi
i would like to configure cisco jabber for iphone for the purpose of using my smartphone for calls and instant Messaging
my question is : i will need COP file uploaded into CUCM 10.5 or already integrated and also the configuration required
regards

These guides will give you additional info on config part:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0110.html#JABI_TK_C15AA350_00
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0101.html

Create Request for cotation with language EN

Hi,
When i create a request for quotation for a foreign vendor, who uses language EN as a communication language the material short text on RFQ appeares in PT, despite in material master i mantain the material description in PT and EN.
My loggon languange is PT.
Thanks in advances,
Catarina

are u not able to see the text in EN language even if you issue the rfq to vendor
please check in tcode me47 -can u see the text in EN or not

Cradle for iPhone with protection?

Purchased an iphone cradle to charge and sync my iphone, but it doesn't fit with the protective casing I have.
Wondering if there are any cradles out there designed to fit iPhones with these cases. Can't seem to find one.
Thanks!

Since each case has different dimensions, that would depend on the specific case, don't you think? (Any reason why you're keeping the case model a secret?)
Some cases like various SwitchEasy models come with an adapter to use in the Apple Universal Dock. Some cases have a removable lower section so that you can use the standard dock.
Message was edited by: modular747

TS3999 Help request for Iphone 4S calendar that won't sync with Mac OS X

My I-Phone 4S (6.1.3) calendar changes won't sync with my MAC OS-X (10.8.2) after trying the Apple support suggestions. Please provide your solutions if you have experience with this issue. Thank you in advance.

You need to update your OS X software to v10.8.5.
Click your Apple menu  top left in your screen.
From the drop down menu click Software Update.
Restart your Mac after the updates are installed.
On your Mac, make sure Calendars is selected in System Preferences > iCloud
Your iPhone, tap Settings > iCloud
Make sure Calendars is switched ON.

Feature Request for iphone - how to improve your battery life

I have talked to few Apple support guys and I want to see if others have the same problem I have and support this feature request.
Your iPhone battery can get drained very fast if you are in an area where there is no AT&T Signal. This is not unusual as other phone have same problems. With my other phones such as my old Treo, I simply put it on Airplane mode.
But with the iPhone I can use WAP and I can get great WAP signals during the day.
The problem I noticed is that even if I have good WAP signal, if there is no AT&T signal it drains my battery, sometimes so bad that I could fully discharge in a day where as with same usage in other areas I would have only used about 30% or so...
So I would like to see Apple put in an option to be able to disable AT&T but keep the WAP service enabled, so this is just like Airplane mode with WAP still on.
I have tested by having my iphone running in WAP mode and when not in use I put it in Airplane mode, then try this again with exact usage another day but not put it in Airplane mode when not in use and I can see big difference.
The test was done in my building where there is NO AT&T signal.
Help me AAPL, I am a big investor and have all your products, bought my iPhone on 6/29 after waiting in line for 3.5 hours. You recently added disable Roaming option for Edge, that is a great option, now add this option so we can extend our battery usage!!!!!!
Thanks!!!!!!

This is a user to user forum, so nobody from Apple is going to see this. You might want to resent it to Apple feedback instead: http://www.apple.com/feedback/iphone.html

Request for iPhone 5 with words of wisdom

Similar Messages

Maybe you are looking for