Request for MCID and Access code.

Hi
I lost have my MCID and Access code. Please let me what are details required.

Contact your regional service center. They'll help you out with retrieving this information.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Similar Messages

Not received MCID and Access code from microsoft after completion microsoft Exam

Hello Microsoft ,
i take the
Exam 70-480: Programming in HTML5 with JavaScript and CSS3
before 7 days but for now you don't send me any email contains
MCID and Access code
my email register in exam : [email protected]
please can you check
thank you very much

Please note that these forums are devoted to peer-to-peer support, meaning that the messages are read and answered by other users like you, usually not by Microsoft personnel. This means that we do not have any access to your personal data to check
for your MCID and Access Code. Instead, you should call your Regional Service Center, and tell your problem to the support person. They will be able to fix the problem.
http://www.microsoft.com/es-es/learning/help/service-americas.aspx
http://www.microsoft.com/es-es/learning/help/service-europe-africa.aspx

To run VPN setup my iphone is requesting for 4 digit pass code ... can you pls assisit?

To run VPN setup my iphone is requesting for 4 digit pass code ... can you pls assisit?

Hello RozR,
We've an article that can help circumvent the new passcode and restore access to your iPhone.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

Request for some Visual Basic code?

Hello not sure if I'm posting in the correct area but I have a request for some Visual Basic Code.
I use a particular document in word quite often to fill out forms for my job. However I would like something that allows me to open a new instance of the same document while closing the current AFTER I print it without any extra mouse clicks, or if after
I print the document the forms are cleared and I can start over.
P.S. I would take the time to learn how to do it myself but I currently reside in South Korea and work for the USAF so I don't have much time.

Hi,
I suggest you post the request to Word for Developers forum since it needs support for coding:
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=worddev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support

MC ID and Access Code

I have taken 70-347 on 20, Dec 2014. I still have not received my MC ID and Access Code.

Well it might take up to two weeks to receive that code. So my advice would be to hold on for just some more time and otherwise contact the Regional Service Center by phone or mail. Take a look here for which center is applicable for you:
https://www.microsoft.com/learning/en-us/help.aspx
Maurice

How to enable password request for restart and shutdown?

Hi,
I'm neither a Linux nor an Arch Linux newbie, but inexperienced regarding this particular issue.
I want to enable password request for restart and shutdown and want to know if I'm mistaken, because trial and error might become to time-consuming while working on a project.
I read https://wiki.archlinux.org/index.php/Al … o_shutdown.
$ ls -hAl /usr/bin/shutdown
lrwxrwxrwx 1 root root 9 Apr 22 03:02 /usr/bin/shutdown -> systemctl
If I try to run $ shutdown -hP 28 or $ shutdown -c nothings happens, I need to run $ sudo shutdown -hP 28 and $ sudo shutdown -c and type a password. That's the way I want it.
If I e.g. run $ shutdown -r now no password is needed. I want to disable this. It should behave the same way as shutdown -hP/-c behave. I want to type
$ sudo shutdown -r now or $ sudo systemctl reboot etc. and then the password should be required.
$ sudo grep -vn "#" /etc/sudoers | grep [[:blank:]]
72:root ALL=(ALL) ALL
73:rocketmouse ALL=(ALL) ALL
The user "rocketmouse" should have all permissions after typing a password, but not without typing the password.
IIUC what's written at https://wiki.archlinux.org/index.php/Polkit, I need to edit
$ pkaction | grep login
org.freedesktop.accounts.set-login-option
org.freedesktop.login1.attach-device
org.freedesktop.login1.flush-devices
org.freedesktop.login1.hibernate
org.freedesktop.login1.hibernate-ignore-inhibit
org.freedesktop.login1.hibernate-multiple-sessions
org.freedesktop.login1.inhibit-block-idle
org.freedesktop.login1.inhibit-block-shutdown
org.freedesktop.login1.inhibit-block-sleep
org.freedesktop.login1.inhibit-delay-shutdown
org.freedesktop.login1.inhibit-delay-sleep
org.freedesktop.login1.inhibit-handle-hibernate-key
org.freedesktop.login1.inhibit-handle-lid-switch
org.freedesktop.login1.inhibit-handle-power-key
org.freedesktop.login1.inhibit-handle-suspend-key
org.freedesktop.login1.power-off
org.freedesktop.login1.power-off-ignore-inhibit
org.freedesktop.login1.power-off-multiple-sessions
org.freedesktop.login1.reboot
org.freedesktop.login1.reboot-ignore-inhibit
org.freedesktop.login1.reboot-multiple-sessions
org.freedesktop.login1.set-user-linger
org.freedesktop.login1.suspend
org.freedesktop.login1.suspend-ignore-inhibit
org.freedesktop.login1.suspend-multiple-sessions
org.freedesktop.machine1.login
IOW I need to replace every yes and no etc. with auth_admin in $ grep -v lang /usr/share/polkit-1/actions/org.freedesktop.login1.policy.
Am I mistaken?
Regards,
Ralf

You'll need to create a rules file which uses javascript.
https://wiki.archlinux.org/index.php/Po … tion_rules
// /etc/polkit-1/rules.d/10-admin-shutdown-reboot.rules
polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.login1.power-off" ||
action.id == "org.freedesktop.login1.power-off-ignore-inhibit" ||
/*...SOME_MORE_IDS_HERE...*/
// return polkit.Result.AUTH_ADMIN_KEEP;
return polkit.Result.AUTH_SELF_KEEP;
Last edited by progandy (2015-06-21 17:42:35)

Requesting for Vehicle, and

HI,
How can map to the Transpotation Process as well Vehicle information,
My company process is own manufacturing and internal transpotation arrangement, when delivery is required, thay are making delivery document and as well raise for the request arrange vehicle, then after making shipment document , when arrange vehicle maintain vehicle meter reading and time of going outside and time of comeing inside these details maintained here. and any problem of vehicle also maintained.
where can i map of this process , please anybody help to me
Regards,
Kishore.

I have a really hard time understanding that requirement.... in none of our projects has this come up so far. What's the reasoning behind that?
I mean, if you do that, a can't request for a, and b can't request for b, but a can request for b, and b for a, right?
So, the only reasoning behind that would be some kind of SoD separation between requester and user (which serves no real purpose, does it??).
If you want to limit the people that can request at all to a certain group, set authetication source to UME and give only those users a UME account.
Or, if you want SoD, set "approve/reject own request" to "no" in end user personalization, so the approver can not be the same persoin as the requester.
If none of these suit you, maybe you can explain in a bit more detail what you're trying to achieve.
Frank.

OBIEE Analytic Report Requests for Financial and HRMS Analytics

All
Does anyone know where i can get a complete list of the available reports(requests) for Financial and HRMS Analytics. I have an incomplete copy from a seminar i attended, but cannot find where to get a complete list.
Thanks in Advance.

Hi,
Please tell me which version you have use. 10g or 11g
if you are using OBIEE 11g then, New-> under Published Reporting -> Report.
if you have .rdf file then upload it and saved.
and simply create dashboard, drag and drop report into dashboard.
Regards
Prashant

Print automatically a request for quotation and purchase order

hI,
I create a new message ZNEU and I link a new form.
I want the system creates automatically the message ZNEU when I save my request for quotation.
In transaction NACE, I specify the output type ZNEU
My Access sequence is 0001 DocType/PurchOrg/Vendor
I specify a procedure RMBEA1 Purchasing RFQ
Then I put in step 10 the condition type ZNEU and a requirement 101
I just copy the message NEU in ZNEU.
And in condition record ( tcode MN02) I create the output type with combinaison purchasing output determintation document type.
With all these datas I haven't anything when I save the RFQ?
I have the same problem with purchase order.
Anybody have an idea?
Thanks a lot for your help
Kari

Hi,
For RFQ create outut condition using MN01 transaction give your output tpe ZNEU and choose the option doc type as AN and give your purchase group.give transmission medium 1 and time 4.In communication method give printer name and tick print immediately and save.Then while creating RFQ for that purchase group message will come automatically.
For PO create output condition using MN04 transaction and document type is EF.Repeat the same like RFQ.
Hope it will solve your issue.

My phone does not show contact names for country and area code while having in coming calls. Although, I have endorsed the name with numbers. How do I the problem. My one is a iphone 3s device with updated os. Please text to help

My iphone does not recognize saved contact number while having incoming calls due to country and area code as auto prefix. How do i fix the problem. How do i ensure that the phone recognize calls with and without the country and area code. Please text to help.

1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
2) When the system answer press 1 for "Program or activate your phone"
3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
5) Wait a few minutes (I waited 3 just to be extra safe)
6) Open the Message App to verify the fix

Lpadmin - request for username and password - not responding correctly

Recently updated to a new computer and 10.5.7.
A printer was paused (somehow). Tried to resume printing and got a request for an lpadmin administrator user name and password. Mine is the only account on this computer. Put in my user name and password, but this was rejected. If I tried 3 times I was told to try later (and given my password hint). However, after clicking OK to this dialogue the action WAS taken.
Same thing happened when I tried to add a printer. It will not accept my username and password, but if I persist until I get the message to try again later, the printer WAS added.
So, I am back to having a printer, but this seems like a bug.
Steve

see this link
http://support.apple.com/kb/TS2754

Realm of my application for identity and access

I plan to replace Azure cloud services’ provided subdomain (myapp.cloudapp.net) with our own domain, customDomain.com. I eventually find out that I cannot do that. I have to configure a custom domain name to route traffic to myapp.cloudapp.net. Why does
not Azure allow me to replace myapp.cloudapp.net with my own custom domain? I end up having two domains for one site. Please look at this site:
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-custom-domain-name/
That custom domain name also has an SSL certificate from a CA. In addition to that, I also use single sign on for my application (Identity and Access). In this case, I configure the Identity and Access (realm of my application) with my custom domain name.
Is this the right way? It does not make sense to configure this with myapp.cloudapp.net. I currently have issues with ADFS but I could not figure out why.

Hi,
Here providing article might helpful for your case.
Domain mapping, Domain forwarding, SSL certificate for Windows Azure
http://blogs.msdn.com/b/sriharsha/archive/2012/02/25/domain-mapping-on-windows-azure.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Nokia 808 Pureview feature request for Phone and C...

Hi,
Where would be the best venue to make feature requests for the 808 functions? These are some nice-to-have ideas that I would like to propose, which would increase its awesomeness:
- in video mode, add a "lock exposure" setting so that the 808 doesn't continuously adjust exposure after recording starts. this would be equivalent to setting the exposure to manual on a regular videocam.
- in photo creative mode, add a voice-activated self-timer, where it would take a shot when sound reaches a certain threshold. this is similar to what the Shout 'n Snap app does for the android.
- in phone calls, add an option to use proximity sensing, so that when you take the phone away from your ear, the handset automatically switches to speaker phone, or vice versa. this would be equivalent to the Phone Speakers Switcher on the N900.
Thanks

i'd like to make an addendum to my request and change it to "lock exposure and white balance".
i just found that while shooting, it does not keep the white balance setting throughout. for example, select "tungsten" and the video will start with this, but later it adjusts as if it was under "auto" white balance setting for the rest of the video.

Disabling the customizing request for GJG1 and GJG2

Hi,
Our configurator are customising the data in the 'Change actual distribution cycle for joint venture' segments. For every segment / distribution cycle change, its prompting the customizing change request. we want to avoid creating customizing request for every segment and treat this as master data. The transaction is question are GJG1 and GJG2 and Tables: T811C, T811F, T811K.
Is there a table or transaction where it can disable from creating a transport in STMS for each change for segment allocation?
how to change the Assessment Cycles not be a transportable?
Appreciate any help
Thanks,
Sunil

Sunil,
ideally in Production , these will be set as non editable , and hence the request is being created so that the same can be transported.
If this is happening in Dev , how do you want the changes to be carried forward ,
otherwise if it is in PRD , is it allowed to create local objects in production ?
This will be a BASIS setting .
Arun
Assign points if useful ..
P.S I don't think this is the right forum for this post , suggest you try the ERP forum instead..

Request for MCID and Access code.

Similar Messages

Maybe you are looking for