Request for new battery specs

Can someone tell me what are the specs for a fully charged new battery for a 2008 MB (aluminum)?
i.e. full charge capacity, voltage, amperage, etc.
My current battery shows 3276 charge capacity, 12419 volts, 0 amperage, 551 cycles.
It used to say "replace soon", now it says condition "normal".
Did the battery calibration thingy, and MB shuts down sooner around 17% these daze.
Time to replace?
Thanks for all replies.

Full capacity originally was around 4200. At 550+ cycles, your battery has had a long and productive life. Consider a new one.

Similar Messages

Duplicate Hardware Key when tried to request for new license key

Dear Experts,
Our SAP ECC6 license key is going expire in these few days. Therefore, I tried to request for new license key with the same Hardware key at SAP Support Portal, but it showed "Duplicate Hardware Key".
Should I wait for the current one to expire before I could request for new one?
Regards,
Abraham

Hi Nick,
It's not a temporary license.
It just when I tried to get a new license key 1 week ago, the installation number we had was just licensed for MaxDB as database server, therefore, it only gave 2 weeks validity of license key.
Now, we have changed our contract licensed to MS-SQL server.
Therefore, I need to get the new license key based on MS-SQL server. Since, I didn't do any reformating on the server, thus, the hardware key is still the same when I tried to get the new license key.
What should I do?
Regards,
Abraham

Time for new battery

My white 13" macbook needs a new battery. Any info on who sells the original battery at a discount (apple price is $129). Or any opinions on maybe buying a third party battery? Thanks!

CAUTION: Don't purchase a McVolt battery from Battery Hippo. From what I can tell Battery Hippo is possibly a front company for fraud. They never answer their phone, nor do they respond to email complaints and their website return request. Battery Hippo sells McVolt batteries that are alleged to be new high capacity (5600mAh) for a discount.
After receiving the "new" battery, it only charged to 5200mAh according to System Profile. Thinking that it just needed to be discharged and recharged a few times to get to maximum capacity (as the instructions suggested), I "recalibrated" the battery five times. With each subsequent discharge and recharge, the battery lost more storage capacity - down to 4200 mAh on the last attempt.
When I tried to contact Battery Hippo, I found out they don't answer the phone, return voicemail, or respond to email. After a frustrating week, I submitted an on-line request to return the battery. They never approved my return request, so I had to send it back without a return authorization. I'M NOW IN THE MIDDLE OF A VISA DISPUTE. BUYING FROM THIS VENDOR WAS A VERY COSTLY MISTAKE: ABOUT 10 HOURS OF ATTEMPTING TO GET THEM OR VISA TO RETURN MY MONEY (GOING ON SINCE SEPTEMBER 24), AND I STILL DON'T HAVE RESOLUTION.
ONCE I GET THIS DISPUTE RESOLVED, I'M GOING TO THE APPLE STORE. I KNOW THEY WOULD TAKE CARE OF A DEFECTIVE PRODUCT.
I

Request for new feature: Login to Flickr account

I have a request for a new feature for ATV2 in the next sw update. I am hoping Apple will read this.. Please enable ATV2 to login to our Flickr accounts. The way it is, we can't see certain contacts' pictures as their profiles are set to public.
And please find a solution to never ending "Loading XXXX's Library" screen. Loading a library on the same wifi network (both for files on Mac or Airport's USB Harddrive) takes forever.
Thanks

I have an ATV2 and it was logged in fine--I had to restore a few minutes ago because it lost it's connection with iTunes Match, and now I can't log in any more. This is TERRIBLE as I HAVE to keep my photos on Flickr private, but want to have them playing on the AppleTV at home for me, friends, and parties.
Why did this go away?!?!

Suggestions for new battery replacement for 1st gen Ipod?

Hello all,
I recently acquired my brother's 1st gen Ipod mini. I love the thing. As with others, I think I'm having troubles with battery life. I have played songs on it for around 2 hours today. At 1.5 hours of playtime, the battery life indicator was nearly empty (NOTE: I have read this article: http://www.vsa.cape.com/~danh/ipod.htm and I understand the "lying" battery life indicator). A half hour after this, the unit shut itself off: the battery's charge had been depleted.
I have been looking at ebay and there is one company selling a battery for under 10 dollars with shipping. They seem to be fairly reputable, claiming to be a top supplier of Ipod products and that the batteries it sells are superior to the ones that originally came with the 1st gen mini Ipods. They claim the batteries they are selling are " Internal Li-Polymer Apple Mini iPod Battery
- 600 mAh (High Capacity)
- 3.7 V "
I have ALSO seen a replacement battery for the Ipod mini claiming the following:
" Voltage: 3.7V 550mAh "
Yet another claims:
...our battery which is made and tested to the highest international standard gives you a capacity of 650 mAh which is 50% more than the original Apple battery. The original Apple iPod part number is EC003. This is a brand new high-quality generic (non-OEM) battery."
My question is has anyone replaced the battery on their 1st gen mini Ipod? What voltage and mAh readings should I get for the battery I buy?
-Phillip

Anyone correct me if i'm wrong here but AFAIK:
Ok, the main thing to look for is the 3.7v rating. the mAh refers to milli-Amp hours, i.e. the amount of charge the battery can hold, not the current it outputs.
As long as it's 3.7v, it's cool. And the bigger the mAh, the better.
Good luck in your replacement.

Suggestions for New Battery for 13-inch MacBook

I have been having trouble with my battery for a long time now. Often the computer fails to recognize the battery at all and will turn off when unplugged from the adapter (which is also acting screwy, but that's a different story).
I having been using the original battery that came with the machine, which I bought in September 2006.
Despite the trouble I am having with the computer failing to recognize the battery, I concede that its probably time for a new one.
So my question is twofold:
1. What battery manufacturer/maker do you recommended? / What battery has worked well for you?
2. Once I get the new battery, that should fix the problem I'm having with battery recognition, right?
Please find my current power settings/information below. Also, my computer is randomly recognizing my battery after weeks of not, the settings reflect this change.
Thanks!
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 65336
Remaining Capacity (mAh): 65336
Amperage (mA): 749
Voltage (mV): 12121
Cycle Count: 127

Akuma.hime wrote:
1. What battery manufacturer/maker do you recommended? / What battery has worked well for you?
Apple
2. Once I get the new battery, that should fix the problem I'm having with battery recognition, right?
Should if that is the problem. Have you tried this?
Intel-based Macs: Resetting the System Management Controller (SMC)
How often did calibrate your computer's battery?
You could also take it into an Apple store and ask them to check it.

Criteria for new battery and case

So I went to my local authorized apple repair place today and talked for quite a while to a very nice genius who left me more confused than ever about how bad a battery needs to be to warrant replacement. There seem to be no clear criteria.
What my battery does is vacillate between believing it has 30% of its original capacity left after 142 cycles and 80%. It lasts about an hour to an hour and a half on battery with bluetooth and airport off and the screen dim, and lately it has begun shutting off suddenly while on battery power.
When I visited the store today, it happened to believe it had 78% of its original capacity left, and it didn't shut off while he was watching it. Apparently 78% capacity was not bad enough to warrant replacement, because he asked if I could either leave the macbook with him for testing, or come back and show him what happens, if I can figure out what triggers the changes in capacity or the sudden shut-off. He said that no log would show a sudden shut-off like I was describing, so he would have to see it himself.
This left me pretty confused, since I thought that even the 78% was low after 142 cycles compared to what other people were reporting. I wonder if there are any objective criteria so that we can KNOW if our batteries are among those that need replacing.
As to the case, I have better news. Mine is one of those cases that has cracked very near the edge, under the right-hand magnet. After examining the rest of the case to make sure it showed no evidence of dents or scratches to suggest it had been dropped, he agreed right away to replace the case and has ordered a new one for me. He seemed to know of the problem and of Apple's willingness to replace such cases.
So that leaves me this weekend trying to figure out when and why my macbook shuts down when it's on battery power so I can reproduce it for the genius ....weird!

I had the same problem with my computer shutting down at 30 minutes left on the battery. You might be better off calling the number in the update. I explained to them the problem and I had a new battery two days later and then you just send the old battery back. No cost.
If you go back to the store ask to speak to the manager. Sounds like you got a genius that is not to bright. If you know when you battery is going to shut off your computer you could have enough on your battery to start it up and after a few minutes when it reaches that point it shuts down.
Mine was always at 30 minutes. You should not have to jump through hoops since this is a known problem.
Mort

No reply to request for new license

I've made the usual request for a new 90-day license for my NSP, but unlike previous requests I don't get the e-mail with the new license key... has this service been suspended for some reason? I've tried providing two different e-mail accoubts, but still no reply...
Trond

Seems that there may be a problem and SAP knows it.
Problem with licensing NSP
Regards,
Rich Heilman

13" MBP 2010 "Replace Now" battery condition, 1050 cycles, Will i have to pay for new battery?

I have a spring 2010 13' macbook pro. The problem with my macbook is that when i unplug the chager, after it says its fully charged, it automatically turns off. My batteries condition says to "Replace Now". I checked the battery cycle and its at 1050. i understand that my battery is supposed to last for 1000 cycles. Well my question is will i have to pay $129 for a new battery even though I still have a year left on my applecare?

Thanks Clinton (Birmingham, England?). I've actually only had this computer's battery on reserve twice since I bought it, but it generally runs down to 30 to 60% a couple of times a day, then I have plugged it in to top it off. I try to top it off before 30% because on this forum I've seen a couple of times that charging it from 50% twice, is much easier on the battery than charging it once from fully depleted.
So I guess if you charge it from say 70% to capacity three times this counts as one cycle?
Anyway, I'm not going to get obsessed about this. This is my third new or almost new MBP from my company, and I've never had the same one more than two years. I have had to replace batteries, but that is on old ones that have been handed down to my children.

Credit Memo Request for New Sales Organisation

Hi Frnds
I have a requirement in which i need to create a Credit Memo Request for the newly created sales organisation using the old billing document number created for old sales organisation.Please kindly help me in this regard.
Thanks in Advace
Sowmmya B

Hi,
Did you try creating a CMR online ??
Regards

Cannot log into my account, request for new password but did not receive it

Hi All,
I had an account which is a japanese account with some credits in it. so I haven't use that account apart from my ibook & imac got stolen, So finally got a new mac, managed to log into my english account but the japanese account kept telling me I got the wrong password, so I request new password to be send but don't receive it. contacted the Japanese Apple site but no reply... hope my account hasn't been hacked? also what happens to those music I bought? Do I create a new Japanese account so I can buy my music?

Hey Rawansarah,
Thanks for the question. I understand that you are experiencing issues with Apple ID security. It may be best if you contact our Account Security Team to troubleshoot these issues:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thanks,
Matt M.

Repeat of last request for new OC4J with Java SSO

Problem: When a request is redirected to the 2nd OC4J in a group, reauthentication with Java SSO occurs as expected. However, the request has to be repeated with the 2nd OC4J before it is actually executed. How can I fix this?
Scenario:
Java SSO is set up for 2 OC4J instances (home1 and home2) in the same server and group.
The same ADF application is deployed to both OC4J instances.
1st request goes to home1. User logs in on java_sso login page.
Home1 dies.
User clicks on link to navigate to a different page. 2nd request is submitted.
Log messages for home2 show the reauthentication.
Navigation to the different page doesn't happen.
User clicks the link again.
This time, navigation occurs as expected.

I don't think starting a new OC4J for failover will resolve this problem since the requests are being routed to the other OC4J in the group when the first one "fails". It's just the matter of having to resubmit the last request made when the first OC4J fails.
Since I made the original post, I added application clustering to see if that would resolve this. It doesn't. I did verify that I have the same session id with the 2nd OC4J. Any other ideas would be appreciated!

How to send a request for new updates for BC?

I'm looking at creating a website for a College and I'm looking at BC to manage this. My problem so far is that the admin section is nice and all but there is no way to give a new admin rights to specific page / pages. Which was so nicely done with Adobe Contribute. Since Contribute is basically going to the waste side. I need something that can work at that level.
Any suggestions on How to request this for the admin section?
Thanks.

Hi,
Unfortunately there's no option to give web page specific permissions to an admin at this stage.
The only workaround is to use workflow as a "content approval" workflow to monitor edits.
Kind regards,
-Sidney

Request for New Features in Adobe Application Manager

Creative Cloud has been around for a year now and Adobe Application Manager has been the tool to update and download new apps. AAM works fine but, it's so minimal, ever since then I've been waiting for Adobe to release a more useful version.
Here are some essential features that would make Adobe Application Manager more useful...
- Make the AAM window resizeable. If a window contains a long list of items why would it be locked at a short height? Just let the user expand the window as large as they like to view all items.
- Show the version numbers next to the application titles. User should be able to see the version of the available update as well as the version currently installed on user's computer.
- Show the available app's download size in MB. And, while downloading show the MB progress/totals not just a percentage.
- Allow user to pause downloads.
- Show a short description of the application under each title. Or, at least make a link to the application's webpage.
- Add an Uninstall option for user's existing apps.
I currently have Version 7.0.0.324 of Adobe Application Manager. Please let me know if there is some other more advanced version of AAM or if I'm overlooking some existing features.
Thanks. Den.

Hi dendowling
Thanks for showing your interest in Adobe Products ...I appreciate your findings in AAM...
You can Raise Feature Request on below link : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Adoption of CFID/CFTOKEN from request for new session

Hi
We've noticed that ColdFusion automatically uses CFID/CFTOKEN
from the request, if there's no session available for this token
combination and ColdFusion creates a new session. Is there a way to
tell ColdFusion that it shouldn't use the values from the request
but generate a pair of its own?
Regards
Sargon

10.12 is the latest and greatest SW version for the device (from mid-2010).
I'm sad to say, but this device model has been out of production already for a long while and no new SW releases can be expected. Also some of the things you listed are such, which would not even be fixable by new SW version, but would require other changes.
you could probably try updating e.g. the browser app to a newer version via http://download.browser.ovi.com.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

Request for new battery specs

Similar Messages

Maybe you are looking for