Request for official ethernet bonding support
Arch already has excellent support for LVM. I run two machines with LVM2. In order to make AL even more server friendly, what about adding bonding support? It shouldn't involve too much work, just an extra if block in etc/rc.d/network, an official ifenslave package, and one or two lines in rc.conf.
There is a user contribution that does it here:
http://bbs.archlinux.org/viewtopic.php?t=3082
...but it is a little unpolished and is not official.
I think this would be a useful addition (especially for people like me, who like Arch for fast servers) that wouldn't take too much time from the devteam.
Thanks for the consideration!
arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.
Similar Messages
-
HT4356 AirPrint Support in the Printer Side (Request for Official Procedure/Steps)
*I selected the iPhone community (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint
in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support
AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.Aliel2-
The round button at the bottom of the iPad's front is your Home button. The Sleep button is on the top edge near the right corner.
Normally the Sleep button just puts the iPad to sleep but does not acgtually turn it off. If you used the "Slide to power off" arrow and turned it off, you will need to hold the Sleep button for several seconds until the Apple logo appears, in order to turn the iPad back on.
I wonder if you did the reset the right way, but just did not hold both buttons long enough for the Apple logo to appear? I just tried it on my iPad 2, and it took 17 seconds before the Apple logo appeared. It took another couple of minutes for it to restart to the "slide to unlock" screen.
Fred -
AirPrint Support (Request for Official Procedure/Steps)
*I selected the iPad community as category (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.
Any information will be helpful.
Thanks!arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.
-
Request for input about Forte support for the Eurocurrency
The design work for Forte support for the Euro currency is underway.
The Euro becomes legal at the start of 1999.
It is important that Forte support for the Euro currency provides
all the features that knowledgeable users will expect and require.
Please email me ([email protected]) before July 31 if you know of
features that should be supported, or if you have suggestions or
thoughts of any kind regarding supporting the Euro currency.
Thanks ..
Walt Loew
Forte Engineering
Walt Loew [email protected]
Forte Software Inc. 510.869.3428
1800 Harrison St.
Oakland CA. 94612
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Jonathan,
Contact BEA sales, I believe that version 7.0 supports the seamless
replacement of security providers and that several major security vendors
have developed providers that are or will shortly be commercially available.
Alex
"Jonathan" <[email protected]> wrote in message
news:[email protected]..
First off, this may seem redundant.
Our company is looking for security products that can be used to
secure the Weblogic Application server. We are currently upgrading
from 5.1 to 7.0 and left to my own devices I would use the Security
that is built into weblogic.
However in order to do the due diligence I need to provide other
options i.e. get a product that can be configured to provide security
for the Application server. An additional nice to have feature would
be security for resources outside of Weblogic.
My primary request is for any websites that give a comparison of
such tools. but if anyone has experience using a security tool with
weblogic, it would be great to hear this. If anyone has used an
external LDAP server with Weblogic 7.0 that would be interesting also. -
Request for official ics 4.0.4 kernel only neo v??
hi friends ,,can anyone post official ics 4.0.4 ics kernel.ftf for neo v..thanks
Solved!
Go to Solution.Discussion guidelines.
Message me or any other moderator to seek help regarding moderation. -
Request for S200/S205EXR Raw support
Adobe folks, one of your own mentioned awhile back that work was in progress for Lightroom to support the RAW files from the Fujifilm S200/S205EXR camera. This was some time ago. Will this support still come or is there a change in plans?
Thank you.There could be technical problems. Lr needs a minimum amount of access to raw image data to work, and some vendors lock some key information away and don't provide an easy way to get at that legally.
A question worth investigating is if anyone else supports raw images form these cameras to any great extent.
[Edit]
Well, I did a little research myself, and it appears that the raw support for this camera is very vendor specific. Apparently, the sensor technology is rather unique, and most people have best success with the vendor software. Other convertors are (apparently) not all that successful at getting at and providing access to the full range of raw image data. Whether this inability is a result of vendor lock-in is unknown, but my money is on Fuji not really letting their customers have full access to the image data.
This situation is exactly why a niche company like Fuji (oh, how the mighty have fallen) should consider embracing DNG. -
REQUEST for ARMv6 or lower support !!!
As there are many people using older version of andriod phone and the new Samsung Galaxy Y is being huge in countries like India, it's time to have Adobe AIR support running on it. I did by own research on friends around me who using Andriod phone and it's interesting to found that more than half of them can't ran Adobe AIR. Therefore, if we as developer choosing Adobe AIR as platform to build mobile apps even as simple as "Hello World" apps, there are a huge percentage of Android user cant run it. Which means our apps is going to losing millions or billions of potential customer because of chosing Adobe AIR.
I hope Adobe to bring AIR support on all those lower performance device (ARMv6 or lower) especially those new ARMv6 device. Btw, I have seen Samsung Galaxy Y running great on Unity games because these new ARMv6 device comes with good GPU. So, Adobe should look into it.I thought it can not be
Flash-like technology is low performance
So adobe define high performance machince to using this framework
If your device is low performance,I suggest you can try phone gap
Now Dreamweaver can generate PhoneGap android structure and deploy apk to device directly
How about try it out?! -
Request for Samsung NX10 support
I didn't see any threads on this yet so I'd like to make a request for Adobe to add support for the new Samsung NX10 RAW format in Lightroom.
I second this request. NX10 support in Lightroom 3, please.
-
Has anybody successfully logged an online support request for an itunes card that hasn't been activated properly? I tried the camera to read it but still no good. Get the error about it not being activated properly so i tried to log an online support ticket twice on two seperate days but get another error saying sorry we can't process this request now try later. Very frustrated, my son has a $20 voucher from Christmas he can' t use.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of issue -
Error -200077 occurred at Property Node DAQmx Timing (arg 3) in DAQmx Timing (Sample Clock).vi:1->PID Control-Single Channel.vi
Requested value is not a supported value for this property.
Property: SampQuant.SampMode
You Have Requested: Hardware Timed Single Point
You Can Select: Finite Samples, Continuous Samples
Author: Pcorcs
Attachments:
PID Control-Single Channel.vi 53 KBActually I have already tried a few things you suggested and got as far as the DAQmx Write vi. The error at the DAQmx was a buffer error indicating i needed to set it to 2 instead of the default of 1. Tried using the DAQmx Input and Output Buffer vi to change buffer, with no luck.
Attachments:
PID Control-Single Channel.vi 53 KB -
Dear Apple support!
My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the apple id ; I had call my friend to ask about that but it's been a long time he couldn't remember the original ID that he had used. so now, could you be able to unlock the phone that i can continues to use this phone. Thank you so much, and I appreciate you all
<Personal Information Edited by Host>All Apple support contact information is on the web site - http://www.apple.com/contact/
If your friend needs to recover his AppleID used for that iCloud account, then follow the directions here:
http://support.apple.com/kb/HT5787 -
Official list of supported graphics cards for HP IPISB-CH2 motherboard
Hi,
Is there any official list of supported graphics cards for HP motherboards (specifically HP IPISB-CH2 (Chicago))?
I've been trying to upgrade my graphics for MSI GTX 960, but found out the MB's BIOS (v. 7.12) is incompatible and there's no BIOS upgrade available that would solve this problem. I have returned the 960 and wanted to try the GTX 660, but a few people told me they've also been having BIOS compatibility issues with this one.
The only info I found was that the MB "Supports PCI Express x16 graphics cards" (source: http://support.hp.com/us-en/document/c02854392 ) - which is a very insufficient description (as the GTX 960 meets it and doesn't work anyway).Hi,
There are three versions of the motherboard, in the official web site can see that detail parts, desktops using IPISB-CH2 (Chicago) from factory, and video cards are installed on them.
Another thing to keep in mind is that if the graph is more powerful requiring a power of more watts.
Examples:
http://partsurfer.hp.com/Search.aspx?SearchText=H0C37EA
http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=A5U33AAR -
RRoCE v2.0 mode was requested, but it is not supported.
Customer is using N5k, connecting W2012 R2 host, as well as a W2012 R2 host acting as a SMB3 fileserver.
They use RDMA over Converged Ethernet (RoCE), and receive the following error message
SingleFunc_32_0_0: RRoCE v2.0 mode was requested, but it is not supported. The NIC starts in RRoCE v1.5 mode.
NOTE: If your environment contains mix of different NIC types, you need to make sure that the whole environment is configured to use the same RoCE mode,
otherwise the traffic between the different NICs does not work.
interface Ethernet1/13
priority-flow-control mode on
flowcontrol send off
flowcontrol receive off
end
Global QoS Config
class-map type qos match-any class-rdma
match cos 3
class-map type queuing class-rdma
match qos-group 4
policy-map type qos rdma-policy
class class-rdma
set qos-group 4
class class-default
policy-map type queuing rdma-queuing-policy
class type queuing class-rdma
bandwidth percent 60
class type queuing class-default
bandwidth percent 40
class-map type network-qos class-rdma
match qos-group 4
policy-map type network-qos rdma-network-policy
class type network-qos class-rdma
pause no-drop
class type network-qos class-default
multicast-optimize
system qos
service-policy type network-qos rdma-network-policy
nterface Ethernet1/13
service-policy type qos input rdma-policy
service-policy type queuing input rdma-queuing-policy
service-policy type queuing output rdma-queuing-policy
The end to end link is not working ? Any hints what could be wrong ?http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
Or revert to Firefox 3.6.16, which is available here: <br />
http://www.mozilla.com/en-US/firefox/all-older.html -
Skipping request for user policy assignments due to agent configuration for authority
Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140422164904.539000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 604;
CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
DateTime = "20140422164946.336000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 3216;
CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140804215639.612000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 2212;
CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804215651.440000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 3348;
CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN: smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.423000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.485000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.563000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.657000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.048000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2508;
CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.110000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2188;
CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.188000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-JanHello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS : 1
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION : {}
__SERVER : DEMO-CAPTURE
__NAMESPACE : ROOT\ccm
__PATH :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue :
PSComputerName : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan -
A (reasonable) request for Linux
Hi Adobe Team (specially Chris Cox, who takes a lot of time in this requests),
I want to make "another" request for Photoshop in Linux, and I would be glad if you people could take it in consideration. First of all, there are some clear statements:
Adobe will never port Photoshop to Linux natively.
They would loose tons of money porting it for a very small amount of real customers (and for real I mean people who already bought the product and are willing to move to Linux), c'mon be realistic. When Chris said that it wasn't without reason, there is a huge userbase in Linux, but no real profit in the short/mid term for Adobe (and I could cry out of shame by telling this, but it's true)
It would require at least 1-2 years of work and testing, which maybe Adobe can't afford (I don't know)
So, I'm making my request based on those premises, you will never port Photoshop to Linux natively, BUT:
Could you make an internal study to see if it's affordable for Adobe to provide official support for installation through Wine? I mean, maybe you're doing it, but if not, could you just assign one or two people to make the Wine installers? (that shouldn't take too much time neither money) those people only need to allocate time when it's a new Photoshop release, and the rest of the time they can continue with their usual tasks.
Maybe I'm saying too much, but I think this could be a reasonable way to ask Adobe for some Linux support without asking them to invest tons of money.
EDIT
There are two questions that I left out of the box:
1) A very common response would be: "But the community is already doing the installers, why should we bother?"
It's true, the community are doing them, but they're not enough. There are some Photoshop internals that people miss to make the installers good enough, and a bit of help from the Photoshop team would be nice to solve those bumps in the road.
2) Another possible response: "But the Linux landscape is very fragmented"
True, that's one of the features of Linux, and one of the biggest disadvantages to make huge programs like Photoshop work properly. What I'm asking in this post is to make Wine installers, so the Photoshop team doesn't have to care about:
Efficiency: Wine has it's own efficiency, if we hav to use a bit slower Photoshop we can bear with it.
Fragmentation: Wine and the distros take care about the differences between linux distros, so the adobe team doesn't have to
Support: We don't ask for application support. Just for installation, if for some reason Wine installs Photoshop OK but it fails during runtime it's not Adobe's fault, we're using multiple layers that are not meant to be there in the native product.Best if you post to the official Photoshop feedback forum where Adobe claims to do most of its listening to customer reported bug reports and feature requests
http://feedback.photoshop.com/photoshop_family/searches?query=linux
Maybe you are looking for
-
I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unles
-
So I loaded a webpage and Safari shut down. Here is the error, what caused it in normal speak? Thanks! ~John Process: com.apple.WebKit.WebContent [10084] Path: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServ
-
Quick time movies (.mov) files will not play in Iphoto 11.
Quick time movies (.mov) files will not play in Iphoto 11. The thumbnail of the movie shows but when selected only a exclamation mark appears. I rebuilt the library, thumbnails, permissions etc. I also found the movie files in the iphoto database in
-
Why did the trace NOT show the other switches in between?
I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port
-
Endless backup after hard reset
After i hav had a hard reset of my macbok pro my time machine (with time capsule) always start doing a full backup even though it's not necessary. It seems it doesn't remeber the previous made backups. Do anyone know a solution to this? Rather anoyin