Request for official ics 4.0.4 kernel only neo v??

hi friends ,,can anyone post official ics 4.0.4 ics kernel.ftf for neo v..thanks
Solved!
Go to Solution.

Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Similar Messages

Request for official ethernet bonding support

Arch already has excellent support for LVM. I run two machines with LVM2. In order to make AL even more server friendly, what about adding bonding support? It shouldn't involve too much work, just an extra if block in etc/rc.d/network, an official ifenslave package, and one or two lines in rc.conf.
There is a user contribution that does it here:
http://bbs.archlinux.org/viewtopic.php?t=3082
...but it is a little unpolished and is not official.
I think this would be a useful addition (especially for people like me, who like Arch for fast servers) that wouldn't take too much time from the devteam.
Thanks for the consideration!

arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.

HT4356 AirPrint Support in the Printer Side (Request for Official Procedure/Steps)

*I selected the iPhone community (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint
in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support
AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.

Aliel2-
The round button at the bottom of the iPad's front is your Home button. The Sleep button is on the top edge near the right corner.
Normally the Sleep button just puts the iPad to sleep but does not acgtually turn it off. If you used the "Slide to power off" arrow and turned it off, you will need to hold the Sleep button for several seconds until the Apple logo appears, in order to turn the iPad back on.
I wonder if you did the reset the right way, but just did not hold both buttons long enough for the Apple logo to appear? I just tried it on my iPad 2, and it took 17 seconds before the Apple logo appeared. It took another couple of minutes for it to restart to the "slide to unlock" screen.
Fred

AirPrint Support (Request for Official Procedure/Steps)

*I selected the iPad community as category (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.
Any information will be helpful.
Thanks!

arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.

Request For MSI GS70 2PC 419XFR Bios Unlock

Hi Svet!
Request For MSI GS70 2PC 419XFR Bios Unlock (i5&860M)
Bios: E1772IMS.109
Bios link: www . download . msi . com / bos_exe / E1772IMS.109.zip
VBios: 80.04.F7.00.0E (860M)
EC Version: 1772EMS Vers5.04
I don't have PayPal Account - please send me some alternative donation method. (Bank Account or else..)
Best regards, 1nS4n3.

Quote from: alonso_91 on 26-February-14, 23:58:37
Thank you.
Do you need me to upload the bios file? because I believe that the msi website has the 70R archive which made my laptop useless.
you mean you don't want latest version [70S or 70R],
but 70J exactly?
Quote from: alonso_91 on 26-February-14, 23:58:37
the msi website has the 70R archive which made my laptop useless.
how exactly? what hapends after flashing to 70R official?

Vbios request for R9 270X Gaming 2G

Dear mods/admins of the MSI forum.
I'd like to make a request for the following serial number
S/N 602-V303-03SB1309076636
For further analysis and helping comments:
mboard: ASUS M5A78L-M USB3 [Bios latest official]
psu: BeQuiet 650M
cpu: AMD FX 6350
os: Win 7 prof x64
If anybody has been encountering troubles with this setup, comments are appreciated.

Use >>this<<
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (102.rar) and put the included file (TV303MH.102) on that stick.
Rename TV303MH.102 to 102.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 102.rom [ENTER] and let it flash the vbios.

How does a user respond to an email request for group scheduling?

How does a user respond to an email request for group scheduling?
<P>
The iPlanet Calendar Server(iCS) 2.x is a personal calendar system. As such,
messages that are sent out are "publish" type messages, where no responses are
expected. A future release of iCS will support group scheduling and will allow
users to respond to email requests by returning the emails. These email
requests will conform to the iTIP / iMIP standard, which means that they will
also work for Microsoft Exchange users and for Outlook users using Microsoft
Exchange.

An update to what is required and what software did you "purchase" and install? Aren't you on this forum? There's no charge to use this forum.........
Never mind. I just got your question. You received an email saying CSound responded to your post. You don't respond via the email. You come back to the forum and respond.

Guest password request for purplecat website in oakland california 192.168.33.112

guest password request for purplecat website in oakland california 192.168.33.112

I have the same errors occurring at an alarming rate. I did isolate it to the App Store. Specifically when checking for an update. I was hoping that you could test this out for me. Go to your console log and select all messages and then check kernel in the sender box (bottom left). I found that now is a good time to insert a marker. Now launch the app store then got to the update section. Select check for update.
Does this generate a series of the errors? I can reproduce the errors every time I "check for updates". The error would not show up when checking for updates in iTunes.
I did notice errors in both extending from CFNetwork
App store:
2015-01-15 8:40:38.047 AM storeassetd[356]: CFNetwork SSLHandshake failed (-9802)
iTunes
2015-01-15 8:53:53.986 AM iTunes[2200]: CFNetwork SSLHandshake failed (-9806)
Please compare and see if you get the same results.

Why Firefox for Android is causing The Linux kernel to send data packets to random sites?

I've recently installed CyanogenMod on my Nexus 5. Shorty after installing CyanogenMod I decided to install Firefox on my device from here:
https://f-droid.org/repository/browse/?fdid=org.mozilla.firefox
Afrer installing it I decided to install a frontend application for IPtabels from here:
https://f-droid.org/repository/browse/?fdid=dev.ukanth.ufirewall
After installing it I blocked some applications from accessing my data networks, including The
Linux kernel. After some hours passed I took a look at the firewall log and I noticed that the firewall
has blocked several data packets from accessing the internet. The log also showed the IP addresses where
the data packets were being sent. I decided to find out to whom these IP adresses belonged. The results were
rather strange. One particular IP belonged to a French ISP, one on the other hand belonged to a Finnish ISP.
Finally I found one IP that made some sense. That IP belonged to Mozilla. However, at this point I couldn't be sure
that Firefox was causing this behaviour. So I did a little test. I re-installed CyanogenMod on my Nexus 7.
I connected my Nexus 7 to my WiFi-network at my home and I installed the same frontend application for IPtables
on my device. I configured the firewall the same way I did for my phone, so The Linux kernel was also blocked
from accessing any data networks. I surfed the web with my device and did some other things with it. I also checked the
firewall log from time to time, and no applications showed up in the log. So I installed Firefox on my device. And immediately
after installing it The Linux kernel was trying to send data packets to the same IP addresses. Now I was almost completely sure
that Firefox was indeed causing this strange behaviour.
Here are some addresses where The Linux Kernel was trying to send data packets:
69.50.225.155
63.245.217.219
72.167.239.239
23.43.139.27
74.125.232.107
193.229.109.41
63.245.217.160
94.23.204.140
Conclusion:
*I downloaded CyanogenMod from the projects official site and I checked the md5sums of the files
I downloaded before I flashed anything onto my device
*I installed all the applications on my devices (including Firefox) from here: https://f-droid.org
*I didn't do anything stupid with my devices so I dont' think that they were infected with malware
*I changed Firefox settings so that it didn't share any data with Mozilla
So I'd like to have some answers to the following questions:
1)Why Firefox is causing the Linux kernel to send data to these IP addresses and is there any way
to turn this "feature" off?
2)Do the other versions of Firefox and other Mozilla software (Thunderbird etc.) also include this form of snooping?

* 69.50.225.155 - belongs to the EFF, you likely have https everywhere installed
* 63.245.217.219 - aus4.vips.phx1.mozilla.com - Extension update check
* 72.167.239.239 - a1plpkivs-v03.any.prod.ash1.secureserver.net - some GoDaddy hosted site - extension?
* 23.43.139.27 - a23-43-139-27.deploy.static.akamaitechnologies.com - I don't know, Akamai is a world leader in geo distributed websites/services
* 74.125.232.107 - Google - search suggestions or malware/phishing protection database updates
* 193.229.109.41 - not registered to any website - searching seems to suggest it is owned by https://en.wikipedia.org/wiki/Elisa_%28company%29 possibly your ISP or Mobile data provider
* 63.245.217.160 - addons-versioncheck-single1.zlb.phx.mozilla.net - extension update check
* 94.23.204.140 - something related to f-droid.com

A (reasonable) request for Linux

Hi Adobe Team (specially Chris Cox, who takes a lot of time in this requests),
I want to make "another" request for Photoshop in Linux, and I would be glad if you people could take it in consideration. First of all, there are some clear statements:
Adobe will never port Photoshop to Linux natively.
They would loose tons of money porting it for a very small amount of real customers (and for real I mean people who already bought the product and are willing to move to Linux), c'mon be realistic. When Chris said that it wasn't without reason, there is a huge userbase in Linux, but no real profit in the short/mid term for Adobe (and I could cry out of shame by telling this, but it's true)
It would require at least 1-2 years of work and testing, which maybe Adobe can't afford (I don't know)
So, I'm making my request based on those premises, you will never port Photoshop to Linux natively, BUT:
Could you make an internal study to see if it's affordable for Adobe to provide official support for installation through Wine? I mean, maybe you're doing it, but if not, could you just assign one or two people to make the Wine installers? (that shouldn't take too much time neither money) those people only need to allocate time when it's a new Photoshop release, and the rest of the time they can continue with their usual tasks.
Maybe I'm saying too much, but I think this could be a reasonable way to ask Adobe for some Linux support without asking them to invest tons of money.
EDIT
There are two questions that I left out of the box:
1) A very common response would be: "But the community is already doing the installers, why should we bother?"
It's true, the community are doing them, but they're not enough. There are some Photoshop internals that people miss to make the installers good enough, and a bit of help from the Photoshop team would be nice to solve those bumps in the road.
2) Another possible response: "But the Linux landscape is very fragmented"
True, that's one of the features of Linux, and one of the biggest disadvantages to make huge programs like Photoshop work properly. What I'm asking in this post is to make Wine installers, so the Photoshop team doesn't have to care about:
Efficiency: Wine has it's own efficiency, if we hav to use a bit slower Photoshop we can bear with it.
Fragmentation: Wine and the distros take care about the differences between linux distros, so the adobe team doesn't have to
Support: We don't ask for application support. Just for installation, if for some reason Wine installs Photoshop OK but it fails during runtime it's not Adobe's fault, we're using multiple layers that are not meant to be there in the native product.

Best if you post to the official Photoshop feedback forum where Adobe claims to do most of its listening to customer reported bug reports and feature requests
http://feedback.photoshop.com/photoshop_family/searches?query=linux

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Error while raising modify request for AD resource

Hi,
Getting below error in log, while raising modify request for AD resource, UI shows error while retrieving resource entity details.
<Oct 19, 2011 2:15:45 AM CDT> <Error> <oracle.iam.requesttemplate.agentry.operations> <BEA-000000> <The "itresource-type" property is missing for attribute reference AD Remote Manager ITResource, which is of type itresource-lookup.>
I verified the datasets for AD Remote Manager ITResource, comparing with our other environments. It is proper and we are not using AD Remote Manager ITResource anywhere.
<AttributeReference name="AD Remote Manager ITResource" attr-ref="AD Remote Manager ITResource" type="Long" length="10" widget="itresource-lookup" required="false" available-in-bulk="true"/>
Please let me know how to resolve this issue.
Thanks in Advance.
Edited by: 856226 on Oct 19, 2011 4:55 AM

Hi,
I think you should post this in an other forum, somewher in the Fusion stack, maybe Identy Management. This forums is ment for the Oracle database. So please post in a forum underneath https://forums.oracle.com/forums/category.jspa?categoryID=13&start=0
Herald ten Dam
http://htendam.wordpress.com

Request for Discount , Free Transport before creating PO

How does the customer will ask for discount or free transportation of goods to be delivered from a vendor .
I want to send quotations to vendors such that it should contain quantity of items along with request for free goods delivery or some discounts . After getting their quotations back from the vendors is their any way of asking for negotiation of price or free goods delivery ( if this is not asked in RFQ ) .
I need if this is possible , where we define all this things. Points will be rewarded .
- David Boon

Hello David,
Free shipping and discounts are part of negotiation with the vendor. Once you receive the Quotation from vendor then it will be maintained in "maintain Quotation - ME47".
Based on the comparition list, you can negotiate with the vendor for Free Shipping and discounts. If vendor is ready to supply the material with free of cost and discount then you can maintain Discount in Quotation again or in purchase order, where as you will not maintain delivery condition in Quotation/Purchase order.
Hope this helps.
Regards
Arif Mansuri

Request for reporting available icon is missing !

Hi,
I have an infocube which has been uploaded by ODS and the data load was successful.
But--
The request for reporting available Icon is missing in the request.
Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
Why i am not seeing the icon?
Raj

Hi Raj,
If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
otherwise it should appear...
if you are talking abt ODS then you might have missed the step to activate data in ods.
hope this helps..
cheer's
HVR.

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

Request for official ics 4.0.4 kernel only neo v??

Similar Messages

Maybe you are looking for