Request for raw ATCHD footage from HF-10/100 owners.

My HF-10 will be here in a few days, and I like to get a minute or so of raw AVCHD footage to experiment with before it arrives. Anyone know where I can download a small sample from?

Is it true that 1 GB of AVCHD = 5 GB of Apple ProRes?
AVCHD is an H64 variant. All these cameras capture at varying quality levels and that determines the data rate of the captured footage. So "1GB of AVCHD" isn't useful in making any comparison without knowing what data rate that produced that 1 GB.
Have you heard of any Apple development to support AVCHD natively?
No, nor would this be the right place for speculation ... but for what its worth I truly dearly hope that Apple's FCP development team are NOT working on native AVCHD support. What a monumental waste of R&D time that would be for a professional app when there are so many professional aspects of the application that need urgent attention. I dare say you'll get your wish though, as Apple seem far more focused on supporting consumers rather than professionals these days with their Pro Apps. And to be fair, its not surprisingly so. By bringing the cost of their Pro Apps within reach of the average consumer then the line is forever blurred between the two, and hundreds of thousands of paying customers baying for support for consumer formats will surely outweigh the tens of thousands of pro's asking for further development of the core toolset. I dare say you will get your wish, mores the pity :/

Similar Messages

Workflow for deleting extra footage from session/hard drive

I want to save hard drive space. I have several session of 40gb each. I am new to video editing and realize the way to work is to trim the 4gb files so that I only have the needed footage on the drive, deleting the prerolls and extras from my drive. BUT, I dont know how to do this in Premiere Pro CS6. Is this task better done before I create a project?
So what is the best workflow?
Workflow A
1. Insert SD Media to Computer and edit using MPEG Streamclip or Quicktime(trimming)
2. Export clips into Session/Scene based folders on main footage hard drive
3. delete source files from SD media - large files never get saced to hard drive
If this is best, what export settings are best for Premiere Pro CS6.
Can this task be as easily done in CS6?
Workflow B
1. Insert SD card into computer and open clips in Premiere Pro CS6
2. Add Scenes/Sessoins into a Sequence and use in/out points to drop clips/subclips into the project(per scene)
3. export them to hard drive and delete session footage.
Id this is best, how do you export from Premiere Pro CS6 so that the clips in the sequence are now referenced, the audio and video are stored where I can access them/labeled and I can trash the source footage.
I hope this makes sense. I want to trim away the wwasted footage and drive space. My 250GB drive is almost full and only 20-30GB is useufl footage. I need a workflow to reduce the file sizes.
For the current footage I have the resolution of the export doesnt matter, no one will see them but me. Rehearsal footage. I need the audio and video to stay linked(is that what rendering does?)
Thanks.

So an example of what i'm doing is this.
Last week I captured 4 rehearsals (musicians and dancers) each lasting one hour. Each rehearsal contains only 2o mins of usefull footage. But the 20 mins are spread out so that if i edited each session there would be 5 4min clips. There will be rehearsals ongoing for twelve weeks so I''ll be duplicating this process many times. I want to save space on the drive by doing some initial editing to reduce each hour session to 5 4min clips.
What is the best workflow so that at the end of each week I have 4folders each holding the 20mins of good footage(and audio) on my drive and all the unneccessary footage is trashed. A few sessions will comprise a multicamera setup. All sessions have audio from the cameras and audio from a mixing console. I want all the audio from every source kept.
I want to preedit each week so that 12 weeks from now when I do the master edit, I have already saved rive space, matched audio sources to the clips(even if I havent edited multicamera clips)
Can you help me with the front end of the post capture workflow? What is the best way to save space and time given my goal of documenting the rehearsals and for havign a compilation video later? Thanks !!!!

HT4060 how long does it take to charge the battery for a mini Ipad from 1% to 100% ?

how long does it take to charge a mini Ipad battery completely from 1% to 100%?

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

How do I submit a concurrent request (for PL/SQL program)   from RDF

Hi,
I have a requirement i need to call a PL/SQL program using concurrent request from Oracle RDF, I am using below code.
-> PL/SQL program has two input parameters
Case:- 1
reqid :=
fnd_request.submit_request ('SQLAP','IPCS_ACH_VENDOR_PAYMENT1','','', FALSE,
               :P_PAYMENT_BATCH,'N' , '', '' ,
If i ran the above rdf i am getting below errors from concurrent request log
ORACLE error 6550 in FDPSTP
Cause: FDPSTP failed due to ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'GEN_ACH'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Case :- 2
reqid :=
fnd_request.submit_request ('SQLAP','IPCS_ACH_VENDOR_PAYMENT1','','', FALSE,
               :P_PAYMENT_BATCH,'N' );
-> Able to compile the report without any errors.
-> Upon running the rdf getting below error messages
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
=> Case:1 very well worked for Host file .
--- Please help me how to submit a concurrent program( PL/SQL with 2 paramerers) in RDF ...
Thanks
Edited by: Apps Beginer on Dec 2, 2009 1:40 PM

Looking at the 11.5.10 version of the [Oracle Applications Developer's Guide|http://download.oracle.com/docs/cd/B25516_18/current/html/docset.html] on page 21-32 - it states that the FND_REQUEST function must know information about the user and responsibility that is submitting the request. Therefore, the function only works from concurrent programs or forms within Oracle Applications. There are ways around this by initializing this information in your session before your call to SUBMIT_REQUEST. I've never tried this from a Report, but I've done it from PL/SQL that executes outside of Apps. You could try the following to see if it works.
DECLARE
     n_RESP_APPL_ID          NUMBER;
     n_RESP_ID          NUMBER;
     n_USER_ID          NUMBER;
     n_REQUEST_ID          NUMBER;
BEGIN
     n_RESP_APPL_ID := apps.FND_PROFILE.VALUE('RESP_APPL_ID');
     n_RESP_ID := apps.FND_PROFILE.VALUE('RESP_ID');
     n_USER_ID := apps.FND_PROFILE.VALUE('USER_ID');
     apps.FND_GLOBAL.Apps_Initialize(n_USER_ID, n_RESP_ID, n_RESP_APPL_ID);
     /* I prefer to use Named Notation for this call rather than enter placeholders for all 100+ parameters to SUBMMIT_REQUEST */
     n_REQUEST_ID := apps.fnd_request.submit_request(
                                   application => 'SQLAP',
                                   program => 'IPCS_ACH_VENDOR_PAYMENT1',
                                   start_time => To_Char(sysdate,'DD-MON-YYYY',
                                   argument1 => :P_PAYMENT_BATCH
                                   );Obviously, I don't know all of the parameters you need for your request, so I made a "BEST GUESS" based on your code sample so I doubt my example call to Submit_Request will work if you Copy-N-Paste. Make sure you use the correct parameters when you try this in your report.
Hope this helps.
Craig...
If a response is helpful or correct, please mark it accordingly

Underwriter Request for "Terms of Withdrawal" from non-retirement brokerage accounts

I am set to close on a property (missed friday closing date because of this UW issue) and the UW has demanded that I provide "terms of withdrawal for my schwab and fidelity regular (non-retirement) brokerage accounts. I have searched on the internet and these forums and have not seen such a requirement for anything besides retirement accounts. While this requirement is easy to satisfy for a retirement account as there are documents related to withdrawal restrictions, I cannot find anything that will satisfy the UW for these accounts. They essentially want me to prove that I can turn stocks in my brokerage account into cash and access these funds, which is of course obviously true with regard to any brokerage account. I have provided both schwab and fidelity account agreements and statements that show routine cash withdrawals, but this still does not satisfy them. Both Schwab and Fidelity are puzzled by this request but have agreed to provide letters, but they cannot provide them immediately as any communications need sign off. I was told that Fidelity could take 3 business days tor more o provide a letter. As we have already missed a friday closing deadline and would like to close Monday, is there anything I can provide to satisfy this request immediately? I think the request is obviusly absurd and I am working to have it removed, but any advice would be appreciated.

IOBA wrote:
I know this thread is a few days old, but maybe the information will be helpful to someone. I had a similiar, absurd requirement as well from UW. They wanted to know how exactly how I could withdraw the funds from my retirement account even though the account was not being considered for reserves or the downpayment. They also wanted to know how exactly I could withdraw the funds from my line of credit and the exact amount of available credit. For the retirement account - I wrote a short paragraph and explained there is no document that would satisfy their requirement, even though I had asked. The best I could do is provide screen shots showign the current balance of the retirement account, a screen shot of the two methods for withdrawing funds, and screen shots of both applications (one is for home buying and one is for personal/emergency loan.) For the line of credit - I walked into the branch, sat down with a customer service rep, explained the situation, and asked for a letter stating how much money was available on the LOC, how quickly I could transfer the funds from the LOC to my checking account, and when those funds would be available. The CSR, shaking her head and mumbling under her breath about how insane the requirement was, did that. She also printed out a screen shot of my account (checking and LOC), stamped, signed, and dated it. The UW accepted both methods of verification. The LOC was being used for my down payment. I had more than enough reserves (cash) in the bank to cover the required amount and then some, but my lender said not to use it/provide the bank statements becuase it would open up a can of worms explaining the regular deposits into the account, etc. (I didn't argue - I let it be. Keep is simple!)Ha. This is exactly what is going on right now re: can of worms. I got the the absurd statements from fidelity and schwab that basically say "the account holder can withdrawal his money on demand" (it also noted that this was the case because they are non-retirement accounts, which is why this request was so absurd to begin with) , the underwriter has come back with additional requests relating to all my deposits. As I gathered money from three separate brokerage accounts in order to wire the money from one place, they are asking for all sorts of proof that the money came from those accounts. I think I have provided that now but the underwriter has now gone dark and we are in danger of missing closing for the third straight day after a friday deadline. I am extremely frustrated at the UW, but also with my LO for overdocumenting this loan and inviting all of these ridiculous questions.

Unable to release transport request for modified Planning book from Dev Sys

Hi All
can someone advice on this:
We have included a new key figure to our existing Planning book, which is already defined in Planning Area. This key figure is just getting shipping data for comparison and is not having any impact on macros also. We inserted key figure and set the attributes as output only and all looks good in Development system. But when we created transportation request and trying to release request it is giving error "Test Call of transport control program (tp) ended with return code 0208" Message no: TK094
can any one advice on this
KV

Hello,
Please check with Basis team. I think this is not related to planning book that you are trying to export. A look in the message text gives the following:
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed.
Hope this helps.
Warm regds,
Ashutosh

Request for PO attachment replication from SRM 4.0 to ECC 5.0 in Extended C

Hi All,
I want to replicate the Purchase Order Item Level attachment from SRM 4.0 to ECC 5.0 in Extended Classic Scenario.
Please let me know the procedure for the same like related BADIs in SRM and ECC.
Could you please send any documents related to Document Manage System to my gmail id sudarsan.srm ?
Best Regards,
Sudarsan

Hi All,
I did the following Steps to replicate PO Attachments from SRM 4.0 to ECC 5.0 in Extended Classic Scenario as per OSS Note 1057932:
Step 1: I activated BAdI BBP_CREATE_PO_BACK~Fill_PO_INTERFACE in SRM System and added the following Code
CV_ATTACH_TRANSFER_ACTIVE = 'X'
CV_ATTACH_BE_STORAGE_CAT = 'DMS_C1_ST'
CV_ATTACH_BE_DOC_TYPE = 'SRM'.
Step 2: I created Doc Type SRM in ECC5.o with the help of DC10 Tr Code.
Step 3: I maintained Data Carrier Type PC entry with the help of DC20 Tr Code in ECC 5.0 and default ebtries for Front End Computer Details. (I crsoss checked Storage Category DMS_C1_ST in ECC5.0, it is available).
Step 4: I maintained all the details (document Types) for PC Carrier Type with the help of DC30 as per OSS Note.
Then I tested the PO attachment replication scenario. I could not find the attachment in ECC5.0 in PO (ECC5.) which available in SRM PO (SRM 4.0)
Kindly guide me or suggest me is there any additional settings required to transfer PO attachment from SRM to ECC5.0
Thanks a lot in adavance.
Thanks,
Koyya

Photoshop Updates for RAW Camera Files from a Rebel T4i

I have a Canon Rebel T4i, and I'm trying to get the update for my photoshop cs5 to be able to open it, but nothing is helping. I'm stuck at the 6.7 plugin and can't update it any further. I tried installing 7.1 (which is what it needs to open the raw files) but it didn't let me, so I'm assuming I have to update it by sequence (6.8, 6.9, etc.) except I can't find the update for 6.8 anywhere. How can I update it to read these raw files?

ACR 7.1 and beyond is only compatible with CS6 and up. There never was a 6.8 or 6.9. Therefore you will need to find a way to upgrade or settle for the free DNG converter in the meantime. Refer to this for more details:
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

How can we find out what website/application is requesting for a login/password from the password manager?

When I start Firefox, the password manager window asking for master password pops up in a few seconds even when I have not gone to any specific website that requires me to login. I have the Zotero addon installed which requires login to synchronize itself. However, when I am not visiting a website and the password manager's master password window pops up, I am not sure of what application/website is requiring a password. Is there a way for me (as a user) to know what application is trying to obtaining a login/password from Firefox's password manager?

Connect to your computer, select the iPod under devices. Under summary you will see an option to restore.
http://support.apple.com/kb/ht1212

Request for quotation from enquiry or quotation level

Hi,
Can RFQ(request for quotation) be sent from enquiry or quotaion to suppliers for material procurement?
Regards
Suman

hello,
I have created new posting period and series for financial year 2011-12.
In previous year I have created 600 voucher. My issue is that when I am creating new
voucher, voucher number is showing 601. I want that for new series voucher number should be
start from 1. but it seems like numbering series doesn't affect the voucher number.
Because there are no series creation for journal voucher. In this case how can I solve my problem.
Please help me on this.
thanks
Annu

Upload request for Quotation from external data (ME47)

Hi is there a easy way to upload request for change in SAP from external data.
Maybe a functionmodule or BAPI.
Like for transaction ME41 ME42 ME47 etc.
Edited by: J. Paulina on Sep 23, 2008 3:55 PM

For things to happen automatically, you'll need to use JavaScript. To import a record, you use the importTextData document method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.502.html
Note that it can't work with Reader and it must be placed in a trusted function in a folder-level JavaScript file.
To print programmatically, use the print method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.511.html
So the script could loop through the records, printing after each one populates the fields.

Can I use a G4 to get raw video footage to a no-firewire aluminum MacBook?

Hi -
I recently purchased a new aluminum MacBook 2.4Ghz and was shocked to discover the lack of a firewire port. Ok, I should have read the specs more closely before ordering, but I never would have imagined this port being removed (other than from the specialized MacBook Air). As others on this board have said, what were they thinking?!
So I have some questions about downloading raw video footage from a firewire camcorder (forgive any ignorance on my part, I'm new to camcorders and digital movie editing--I've never used iMovie). My goal is basically editing home movies.
I have an old G4 tower (1.5Ghz, 1GB RAM). I also have an external firewire/USB drive. The tower will not run iMovie '08 because the processor is too slow. The iLife 08 disc refuses to even load iMovie on this machine.
I haven't purchased a camcorder yet. I spent a lot of time researching affordable camcorders and had settled on a well-reviewed Canon miniDV, which of course, is firewire. This camera does not come with any software.
Would it work to connect the camera to my G4 via firewire, download the raw footage to my external drive connected to the G4, then move the external drive over to the MacBook, connect it to the MacBook via USB, then import the raw footage to iMovie for editing? I realize the copying over USB would be very slow. I assume I need some type of software for downloading the raw footage to the G4. Since iMovie won't run and the camera has no software, is there some type of utility or shareware that lets you capture raw footage?
Is there a better way I can use my G4 to get raw footage from a firewire camera, and then on to my MacBook? Or will this work at all?
I see that there are a few USB camcorders out there, but they seem to be expensive or don't receive very good reviews, so I'd like to go with the firewire Canon.
Thanks very much for the help with this frustrating issue

Well, never mind. I'm returning the MacBook and buying a previous generation MacBook Pro, which ends up being about $200 more.
Solves my problem, but many folks can't afford the Pro. I'll be commenting at Apple customer feedback about the lack of firewire on the new MacBook.
Thanks for reading the post.

IBase When Creating a Request for Change in Solution Manager 7.1

Hello all,
We recenlty upgraded our sandbox system to Solution Manager 7.1 SP3 and are currently investigating the new ChaRM functionality with the new CRM UI. Our company had configured ChaRM back in 2007 and has been working very well since the initial delivery.
While I was following the Request for [Change process simulation from RKT|https://websmp208.sap-ag.de/~sapidb/011000358700000478022011E/index.htm] on our sandbox system, I had noticed that the iBase and Component that we have created in transaction IB52 prior to the upgrade were not showing in our search when we were defining the Change Request Scope section. In the documentation that I have read leading up to the upgrade, there have been no mention of the iBase/Component data becoming invalid post-upgrade nor have I found a conversion process. I have done a search here on SDN and on SAP Notes to see why the iBase and Components were not showing up.
Has anybody encountered this issue since the upgrade to 7.1 or is there something I need to do in IB52 in order for the iBase/Component in the new CRM GUI?
Your assistance in this matter would be greatly appreciated.

Hi,
yes in 7.0 it worked for me too, that is because in 7.0 ChaRM searched for projects based on the IBase you selected.
If there were more than one project where this system is involved you got a pop up where to chose your project.
In 7.1 you chose the project directly, instead of let the system search for you.
And depending on what productive-systems are in this project you get your Ibase list.
If you don't select a project at all you will still get a list of all Ibases in your system.
Iif you ask the SAP, they will allways tell you that you have to have a productive system in your project, at least as you pointed out with a virtual system.
I did not read i t though and therfore ca nnot provide any sources.
This is all based on my experiences.
Best Regards
Daniel
Edited by: Daniel Titze on Nov 23, 2011 6:16 PM

Request For Quotation - ME41 - Item texts are not getting copied

Hi,
I created one RFQ (Request For Quotation) by copying from the existing one (through t-code ME41). But item texts are not copied.
How can this issue be resolved..?
In menu path ( Item --> Texts --> Adopt Text ), "Adopt Text" option is available. But its in disabled mode.

just use F4 to get a valid entry, it is only grey to prevent manual typing

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

Request for raw ATCHD footage from HF-10/100 owners.

Similar Messages

Maybe you are looking for