Request for report to identify SRM PO IR in a month

Need assistance to know the number of items processed (IR) for SRM po, value, vendor and amount for the month of May

Assuming that your SRM PO have a different number range from the direct R/3 PO, you can get the needed information from table EKBE.

Similar Messages

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • Request for reporting  available icon is missing !

    Hi,
    I have an infocube which has been uploaded by ODS and the data load was successful. 
    But--
    The request for reporting available Icon is missing in the request.
    Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
    Why i am not seeing the icon?
    Raj

    Hi Raj,
    If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
    otherwise it should appear...
    if you are talking abt ODS then you might have missed the step to activate data in ods.
    hope this helps..
    cheer's
    HVR.

  • "Request for Reporting available " is not displayed after loading the data.

    Hi
    A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
    Please advise on this.
    Regards
    loyee

    Hi,
    What is the status in Monitor. If it is ok, go to manage of the infocube,
    in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
    Click the first check box, (Set Quality status to OK). If you aggregates,  choose second box.
    Hope this helps.
    Regards,
    Rama Murthy.

  • Simultaneous data activation in cube - request for reporting available

    Hi,
    I'm on BW 3.5.
    I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
    I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
    When I load all the data in a single load, it takes 10 hours to load.  When I break it up into 4 loads it takes 3 hours.
    My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
    Is it possible to get all 4 requests to activate simultaneously?
    I have tried adding an aggregate to the cube, no good.
    I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
    Does anyone have a solution?
    Many thanks,
    Paul White

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • Is it possible to send a request for report pagination?

    Hi,
    I have a page with 3 regions.
    Only one of these regions is displayed depending on a special request.
    This works fine as long as we don't push the select list for report pagination.
    Do we have any possiblities to send a request when we select another rowrange from the pagination select list?
    At the moment we don't get a request after selecting a new pagination.
    The result is that after the pagination there is no region displayed.
    Thanks in advance
    Ulrike

    Ulrike - For reasons like this, it's best not to use REQUEST to control page rendering behavior. Passing an item value so that it stays in session state gives you more flexibility, e.g., P1_SHOW_REPORT:YES.
    Scott

  • Transport request for Report

    Dear Experts,
    I have built a query/ report (in Development System) in Bex. I need to move that report to test system. How to do that? I haven't got any transport request for that. Do i need to create a transport request for that? Could you  give me step by step what to do and how to do, please?
    Thanks,
    Riya

    Riya,
    Please don't ask the same question in different threads, esp as you have not closed out a lot of your previous threads:
    urget please moving to testing system

  • Request for reporting available after rollup. Why not before?

    Hi,
    In infocubes with aggregates, a dataload is not available for reporting until you roll-up the aggregates. This is very unwanted behaviour and we'd like to have the loads available at all times, with or without a rolled up aggregate. All our aggregates are rolled up in the same process chain block after all loads are done. This means that data will not be available for reporting until all loads have finished, something our customers complain about.
    Because parallel rollup jobs collide, rolling up up after every infopackage would make our loadschedule very unflexible (difficult to plan parallel processes).
    Is this possible (by changing a setting somewhere) to change this and make load available for reporting at all times, or is this one of SAP's standard programming decisions without any workarounds?
    Cheers,
    Eduard

    Aggregates data is maintained in aggregate tables.
    Unless, you roll it up after every data load, the aggregate data wont be correct and it wont be consistent with the data in the cube.
    YES< the roll up job will not be complete unless the loading job is compete.
    One suggestion is to review the process chain jobs and see if you can reshuffle the jobs.
    But aggregate roll up has to happen after data loading job of that cube on which aggregate is built .
    Ravi Thothadri

  • Enhancement Request for Reports

    I did search; sorry if I missed a similar request.
    I would like the ability to associate a report with a specific connection to avoid the connection selection. Reports not associated would still show the connection selection dialog. Thanks.

    Hi,
    We do have a more general enhancement logged to identify a "default" connection overall. I'll log this to the mix as well.
    -kris

  • Request for Report Howto

    I'm triying to create a page that contains a report a button and some multiselect list.
    The idea, it's to have the button and the multiselect list in one region and the report in another. When you navigate to the page with them, the report shouldn’t be displayed, but after you select values in the multiselect list and hit the button it should appear. If I navigate to another tab and then navigate to this page the report shouldn’t appear until after I select values and hit the button.
    So far I haven't been able to find a how to do this. I would like to know how this can be accomplished. I have tried, using the value of session and modified it using the button or have a hidden field that the button modifies it but, If I do that the values of the multiselect weren’t modified.

    i just noticed that %null% thing, too, so i'll log that in a bit. thanks. about the condition you're using for your region, i'd go a different route if i were you. it sounds as if you've allowed your multiselect lists to show null values. if you do that and do not specify a "Null return value" for the LOVs, it'll return that %null% string for which you're checking. it's up to you if you want to use our default null string in your condition, but i wouldn't recommend it. we talked about this %null% stuff at...
    PL/SQL returing SQL and null entry in select LOV
    ...so take a look there and decide if you still want to use it. more importantly, though, the first time your users access your report page, those %null% values for your p1_multiselect1 and p1_multiselect2 items won't be set. therefore, checking for %null% in that case does you no good. just keep that mind as you set up your page. assuming you do, in fact, wish to show a null value in your multiselect items, here's my suggestion:
    -in each of your multiselect items, enter a "Null return value" like "novalue"
    -also in your multiselect items, enter something like "Select a value from the list below" in the "Null display value" fields
    -also in your multiselect items, enter that "novalue" string into the "Default value" fields
    -have your report region render with a condition type of "PL/SQL Expression" and have "Expression1" be something like instr(:P1_MULTISELECT1||:P1_MULTISELECT2,'novalue') = 0
    hope this helps,
    raj

  • Request for report SQL Query

    hi all,
    i created links for an element but for some element links the costing and balancing codes were mistakenly given wrong and the element links are plenty so i am unable to find which is wrongly given.
    can some 1 out there provide me with the sql query that will allow me to create a report to run and confirm all the links have costing and balancing codes for all the earnings or voluntary deduction elements.
    Thank you for reading my issue. plz help!

    See if the below helps.
    Change the business group id in the query below-
    select ppf.payroll_name   
    ,pj.name Job,hou.name HR_ORG,ppg.group_name People_Group  
    ,pel.employment_category
    ,hra.location_code 
    ,pet.element_name,pet.reporting_name,pec.classification_name  
    ,pel.costable_type 
    ,pel.link_to_all_payrolls_flag 
    ,pcak1.concatenated_segments Element_Cost_Segments   
    ,pcak1.segment1  
    ,pcak1.segment2  
    ,pcak1.segment3  
    ,pcak1.segment4  
    ,pcak1.segment5  
    ,pcak1.segment6  
    ,pcak1.segment7  
    ,pcak1.segment8  
    ,pcak2.concatenated_segments Balancing_Cost_Segments  
    ,pcak2.segment1  
    ,pcak2.segment2  
    ,pcak2.segment3  
    ,pcak2.segment4  
    ,pcak2.segment5  
    ,pcak2.segment6  
    ,pcak2.segment7  
    ,pcak2.segment8  
    from pay_element_links_f pel   
    ,apps.PAY_COST_ALLOCATION_KEYFLEX  pcak1    
    ,apps.PAY_COST_ALLOCATION_KEYFLEX  pcak2    
    ,pay_element_types_f pet   
    ,pay_payrolls_f ppf   
    ,pay_element_classifications pec   
    ,per_jobs pj  
    ,hr_all_organization_units hou  
    ,PAY_PEOPLE_GROUPS ppg  
    ,hr_locations_all hra 
    where pel.element_type_id = pet.element_type_id   
    and ppf.payroll_id(+)   = pel.payroll_id
    and pcak1.cost_allocation_keyflex_id(+) = pel.cost_allocation_keyflex_id     
    and pcak2.cost_allocation_keyflex_id(+) = pel.balancing_keyflex_id     
    and  pet.business_group_id = 0   
    and pet.classification_id = pec.classification_id   
    and pj.job_id(+) = pel.job_id  
    and hou.organization_id(+) = pel.organization_id  
    and ppg.people_group_id(+) = pel.people_group_id  
    and hra.location_id(+) = pel.location_id  
    and sysdate between pel.effective_start_date and pel.effective_end_date
    and sysdate between pet.effective_start_date and pet.effective_end_date
    and sysdate between ppf.effective_start_date(+) and ppf.effective_end_date(+)
    order by ppf.payroll_name,pec.classification_namePlease close the thread, if your issue is resolved.
    Cheers,
    VB

  • Actication Data for reporting in InfoCibe

    Hi!
    I'm new SAP BI Consultant and I need some helps according to InfoCube loading.
    I load coorectly my InfoCube but I don't know how to activate my requests for reporting in BW.
    We don't have a press bouton 'Activate' like when we want to activate data for reporting in DSO.
    Please, does somebody tell me the process?
    Thks!

    Hi Gaudenzio  ,
        Welcome to BI. Activation is only used in standard DSOs which have 3 tables :new ,change log and active. When data is loaded into a DSO, it is loaded into the new table. Activation is performed to move this data to the change log and active tables.
    You can refer the below link for more info.
    [http://help.sap.com/saphelp_nw70/helpdata/en/43/5fc0680a876b7de10000000a422035/frameset.htm]
    You do not require activation for infocubes or write optimsed DSOs.
    Data is automatically available for reporting when you load a request into an infocube.
    Hope this helps.
    Regards.

  • Request in cube is not avilable for reporting, how to trace this in chain?

    Hello,
    We have cube that gets the delta daily.
    Some day, some body did full load and its failed.
    Regular process chain delta load were sucessfull but they never turned reportable since the previous full load was failed.
    Since we have not received any failure notification.
    Is there way we can find if the request is not reportable to get notification>?
    I have checked the avilable process types, it looks like we need to build custom process type.
    Please advice.
    Cheers
    Angelo

    Hi Angelo,
    If the full update is run via a process chain then you can configure for that chain that if the load fails you get an email notification,
    in the setup of the email notificaton you could make a reference to the target cube and then at least you know that if you don't fix this issue subsequent requests will not be available for reporting in the cube.
    Best Regards,
    Des

  • Enhancement request for VAT Report of Customer and Vendor.

    Hello SAP Gurus,
    Have enhancement request for adding new fields in existing VAT report of Customer and Vendor like user id, GL account etc.
    As I am fresher, can you please help me that how I need to approach. Thanks for your support.
    Regards,
    Saleem

    Hello Saleem,
    Almost all fields required for VAT reporting are available in standard tax report
    S_ALR_87012357 .
    You have to configure the layout from the selection screen as below
    regards
    pb

  • How to create the multiple spool requests for a single report.

    Hi gurus,
                     I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
    now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
    And one more question is can we create a spool request for a report which is running in online.
    waiting for inputs frm gurus.

    Hello,
    As per my knowledge for creating new spool id you will have to set
    output_options-tdnewid = 'X'.
    and then using
    job_output_info-spoolids
    create a pdf using
    call function 'CONVERT_OTFSPOOLJOB_2_PDF'
    Rachana.

Maybe you are looking for

  • Bullet and Full Stop formatting in right to left languages?

    I am copying and pasting text from an arabic document to Captivate 7.  This has been translated for us as I don't speak the language.  The formatting in Word is perfect, bullets appear on the right, full stops appear on the left. When it pastes into

  • Request.setHeader in servlet filter

    Hi there, I am working on servlet filter to filter HttpServletRequest before sending it to the original servlet. The original servlet expects some content posted in the body of HttpServletRequest object. In my servlet filter, I need to modify this co

  • InDesign CS3 crashes when importing multiple files.

    I've got a new box that's been running pretty solid for several weeks now. It's Win 7 with 8 gigs. Just last night it starts crashing when I'm importing multiple files. Doesn't matter if it's JPGs, TIFFs, or PDFs. I can import all the same files one

  • Table linking FI Doc # and COPA doc #

    trying to reconcile fi to copa and there are many manual entries in fi that didnt reach copa. is there a doc flow table per se linking fi doc to copa doc? thanks

  • Certification for SAP HCM

    Hi, I have three years of HR Domain experience and planning to do SAP HCM Certification by OLT Is this helpful for me to get  job in the industry as a fresher for SAP HCM or my domain experience will count to get Job Kindly Guide me... Regards, Poona