Request for unlocking code

please i just received a sprint blackberry Q10 from my sister in US and is not unlocked. can you help me with the unlock code?

allaineem wrote:
for the unlock code that is being purchased on the service provider. On what country do you wish to use this device?
See my link below to the Guide to Unlocking.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

HT201269 how do u request an unlock code for iphone 4s

how do u request an unlock code for iphone 4s

Call the carrier. They are the only ones who can unlock and will give you instructions.

HT5570 I tried to reset setting due to my phone speaker are not functioning except if i plug in earphone.after i key in my phone code,it promp a request for restriction code which i totally cant recall.

I tried to reset setting due to my phone speaker are not functioning except if i plug in earphone.after i key in my phone code,it promp a request for restriction code which i totally cant recall.how can i resolve this issue.

Hello Ridhuan,
Thanks for using Apple Support Communities.
If you forgot your restrictions passcode you will need to restore your iPhone to its factory settings.
i forgot my passcode
https://discussions.apple.com/thread/5196099
Take care,
Alex H.

Still waiting for unlock code since 29th May

I am still waiting for an unlocking code from EE.I first contacted them on 29th May, then 31st May then 16th June, then 26th June, then 13th July, then 15th July.Each time I have spoken to customer services they have appologised profusely and assured me that the unlock code would be fast tracked. The last 2 calls promised me the money would be deducted from my credit on my orange PAYG account within 72 hours and the unlock code would be sent via email in 24 hours afterwards.My phone is xperia ST261.It is second hand, given to me by a friend who upgraded his phone with EE.I have an Orange PAYG simcard which I've had for over 15 years. I still wish to use this but also use a Lebara simcard, which is why I want the phone unlocked.I topped up with £10 so that there is sufficient money to pay the fee.I have filled in 2 or 3 requests online as I had 2texts from EE saying they couldn't continue with the request and that I needed to visit page...blah blah, fill in online unlock request form (again)I have spoken to 6 customer service reps who have also submitted the request....I should know my IMEI number by heart now!I took reference numbers of a couple of the reps but the last one insisted I just had his name and if I didn't get the code within 72 hours to call back and ask for him.......yeah right.call centre ''can I speak to ****'' that's going to happen!I'm really fed up now. I have a lovely phone that I cant use with my Lebara simcard.I am currently in Spain so going into an EE shop is not possible.My account is UK registered as is my simcardI top up by debit card (UK)So I've now been waiting 36 working days.I feel like I'm just being wound up by the call centre people with them keep fobbing me off.Mary

Hi
Really sorry to hear you are having problems.
Just to let you know I am looking into this for you.
If possible could you please send me a Private Message with your IMEI and Mobile number.
Thanks.

E90 still asking for unlock code after hard reset

I forgot the unlock code for nokia e90 i bought used. it was bought from ireland. so i was searching the forums and i found the *+3+call button+switch on technique to hard reset. the hard reset is complete but fone asks for code and now i am totally struck. please help.

The full reset only resets the unlock code for a few models. Obviously the E90 is not one of them. This means it can only be reset by a Nokia Care Point. You will need to bring proof of purchase/ownership with you.

Request for Unlocking MSI GT780DX

i would like to request to unlock all features of MSI GT 780DX bios
Edit Donated
Confirmation number: 3H434379P4357411Y.

Quote from: Mr52 on 22-June-14, 02:48:27
i had windows 8.1 installed after upgrading the bios windows 8.1 seems giving me problem Blue screen of death
haven't modified any settings in bios
is this normal ?
i should install everything again ?
don't know why you have BSOD, what is the BSOD error code?
have you checked SATA Mode IDE/AHCI in BIOS Setup?

Use one store account for two I pads. Get request for security code

Trying to use one store account for two I pads. One works fine, the other is unable to download a free app, window asks for security code.?.......
What security code?

Probably the security code on your credit card

I have returned a broken iphone 4 (factory unlocked) to the store but got a locked version back. How can i request an unlock code if i live on Curacao

Can anyone point me in the right direction?

There is no such thing as an unlock code. Only the carrier it is locked to can unlock it.
If the phone you got replaced was hacked to unlock it instead of legitimately unlocked, then you will have to contact the carrier the original phone was locked to.
If your phone was legitimately unlocked, then contact the Apple Store where you had the phone replaced.

Feature requests for Edge Code (Was: Needed some options...)

I am a photo retoucher & I am new to web designing & started to learn....
I am very happy to have Edge code CC as a code editor really good program. Thanks to Adobe Team...
It would be better if you provide some more options :-
1. If I type <bl in the Edge code CC it shows me blockquote its fine, but if I press spacebar after <bl accidentally then I press backspace to erase the space but after that it does not shows the code hint....
2. I wrote code <h5> This is a headline </h5> and if I want to change h5 to h3, I have to change in both starting tag and end tag is there any option if I change the start tag it would automatically change in the end tag too....
3.It would be nice if the Edge code CC giving dummy text to add. for ex: lorem impsum like....
Thanks

Thanks for your feedback.
1. This should be fixed in the next Edge Code CC build. For now, use Ctrl-Space to re-invoke the hit list.
2. That feature has been requested. It should be easy to implement once Edge Code CC has multiple cursor support, which should be coming soon. Stay tuned.
3. There is an extension for this. Use File > Extension Manager, then click Install from URL... and paste in this URL:
https://s3.amazonaws.com/extend.brackets/brackets-lorem-ipsum/brackets-lorem-ipsum-1.0.1.z ip
You can browse the Brackets Extension Registry for more extensions.
Randy

Request for unlocked BIOS for GT70 2PC Dominator (MS-1763)

Hi there,
I was looking for a unlocked BIOS firmware for OC purposes for my laptop.
Here are the current BIOS / EC / VBIOS versions:
BIOS: E1763IMS.51B
EC: 1763EMS1 Ver5.17
VBIOS: 80.04.F7.00.06
Hopefully I can OC this bad boy soon!

received it, will work on it and will send it back to you when its done after 3-4 hours
Quote
ok cool and if there are any other basic settings that are unlockable,
as i said i will unlock everything that's possible,
what will be there and how they will works this don't depend of me
but i will unlock everything that can be done
Quote
like if there were to be settings needed to change to be able to upgrade my current GPU (gtx 870m) to a gtx 970m/980m. I have the MXM 3.0b slot, just checked it out yesterday. Not sure if there needs to be necessary bios settings for that OR a complete VBIOS flash for the new gpu.
there is no such options related to GPU upgrades
9xx should be native supported for your NB
Quote
I have heard of you making a VBIOS utility, which i would gladly pay for to do the gpu upgrade.
the tool has not connections with GPU upgrades, but modifications only.
However the 9xx models are not supported
Quote
But for now thats fine. the main thing is the RAM cause i have a 4gb + 8gb kingston that can be at 1600mhz, but AIDA64 / CPU-Z tell me they are set at 800 mhz. For my video editing, i need that clock higher most definitely.
you have some miss understanding about it
800MHz means DDR1600, ie: they are already running at rated speed
[double data rate]
oki, will work on it and will be back to you when its done after 3-4 hours
until wait check PM what to prepare
Quote from: bartwrona123 on 25-March-15, 22:15:05
Also One more thing. Ive opened up my laptop a couple of days ago and ive noticed that the two memory slots, which are placed above the hdd caddy in plain sight, have no RAM sticks in them...I've tried looking all over the MOBO if there were 2 more slots i couldn't see (Since my laptop can do upto 32GB) I assume there had to be 2 more slots with a 4gb and an 8gb, but could not find them.
Now i did not take the WHOLE laptop apart, just the bottom plastic + the heatsinks, to see what i got. only say 2 sockets for RAM though.
Is the pre-installed RAM embedded to the board? Or am I just not looking hard enough?
I'd hate for it to be embedded, since i wanted to swap out the current RAM for Corsair 2x8GB @ 1600MHz
will check about it and reply later
EDIT: It looks like the other 2 SODIMMs are on other mainboard side,
see this video:
Code: [Select]
https://www.youtube.com/watch?v=QkL5q1-K15s
you can get detailed info about current used memory sticks without opening the NB,
with for example with HWInfo:
http://www.hwinfo.com/download.php

Can't install beyond request for product code

I am sure it has been covered before but I do not find the answer. I am trying to load WinTen from .iso. Although instructions say we do not need a product code, I can not progress beyond the screen asking for one. If I leave it blank
I can not effect the <Next> key. If I insert anything, including the key for recovery, I am informed that the key does match. What now?

I am sure it has been covered before but I do not find the answer. I am trying to load WinTen from .iso. Although instructions say we do not need a product code, I can not progress beyond the screen asking for one. If I leave it
blank I can not effect the <Next> key. If I insert anything, including the key for recovery, I am informed that the key does match. What now?
My reply is lengthy, I am afraid. Please bear with me.......
1. MS is holding a big event to day at 9a.m Pacific time. It is possible that a new build of Windows 10 TP is going to be released, or even a Consumer Preview.
So, you might want to find out what is being said in the event first.
2. You are right. product key is not needed when one installs the Windows 10 TP.
That said, here are the generic product keys for Enterprise version and non-Enterprise version.......
Enterprise version : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Non-Enterprise version : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
3. Permit me to start from scratch regarding installing Win 10 TP.
It is strongly suggested that you either install it in a virtual machine or dual booting with your existing OS.
Please use the following download links to download the ISO file > then burn it to a bootable DVD and use the DVD to do a clean install.
Enterprise direct download link:
Windows
10 Enterprise build 9879 64-bit ISO image
Windows
10 Enterprise build 9879 32-bit ISO image
Non-enterprise download link :
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10
How to burn iso to a bootable dvd:
There are more than one program doing the same job. I personally use Windows USB/DVD Download Tool. It is easiest.
http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

Request for Trnxn code

Hi
Please let me know the transaction code used to configure timeout settings (eg: 10mins,15mins,.....) for a particular client.
Thanks and Regards
Vidya

Hi,
welcome.
try SICF.
You want to configure the timeout settings of the Internet Communication Manager (ICM) or the SAP Web Dispatcher. The SAP Web Application Server may issue HTTP timeout error messages. The error message displayed is "500 Connection timed out" if you have not defined your own dynamic ICM error pages. If the error occurs, you can use the note to help you with troubleshooting.
Other terms
keepalive, 402, 500, ICM_HTTP_TIMEOUT, ICM_HTTP_CONNECTION_FAILED
Reason and Prerequisites
You are using ICM Release 6.40 or higher for HTTP connections of the SAP Web AS. In other words, your kernel release is 6.40 or higher.
Up to and including Release 7.00, ICM is only used in systems which also have an ABAP stack, and not in J2EE-only systems.
You may also be using the SAP Web Dispatcher.
Solution
The note describes the following:
Client and server roles of the ICM
List of the various ICM timeout parameters
Short description of the icm/conn_timeout parameter
Description of "Processing timeout" and "Keepalive timeout"
Configuration of the ICM parameters for the processing timeout and the keepalive timeout
Timeout parameters in the SAP Web Dispatcher
ICM kernel patches that affect timeouts
There is detailed ICM documentation in the SAP Knowledge Warehouse.
thanks
karthik
Edited by: KARTHIK on Jun 30, 2008 11:49 AM

Request for java code

can any one tell me how to execute unix command in windows platform using java code? (please also send code or related websitename)

when you have that feature OOTB in OIM, why you want it to write java code for that.,??

Request for sample code of hr_ex_employee_api.actual_termination_emp

Hi,
I need sample code for hr_ex_employee_api.actual_termination_emp . anyone who worked on this api or who have knowledge of this api,Please send the sample code
Thanks and Regards
Dixit

I do not have sample code but it is not a difficult API to call. I have worked on it before, so if you have a specific question on it, happy to help out if I can.

Request for unlocked BIOS GT60

hey svet,
i may need a modded bios for my gt60-i789w7h. i cant use any virtual machine which is x64 cause theres no option in my bios to enable the vt-feature. (and add maybe some oc features if possible. im a gamer )
can u help me with that?! could u also provide a tool and a short guide to flash the bios? never did that before on a notebook.
thanks in advise if u agree ill donate
bios version and other stuff u may need added:
BIOS Version: E16F3IMS.105
EC Version: 16F3EMS1 Ver. 4.03

Quote
i cant use any virtual machine which is x64 cause theres no option in my bios to enable the vt-feature.
For VT-x its already enabled in latest official BIOS:
http://download.msi.com/bos_exe/E16F3IMS.10U.zip
Quote
thanks in advise if u agree ill donate
(and add maybe some oc features if possible. im a gamer )
can u help me with that?! could u also provide a tool and a short guide to flash the bios? never did that before on a notebook.
thanks in advise if u agree ill donate
bios version and other stuff u may need added:
BIOS Version: E16F3IMS.105
EC Version: 16F3EMS1 Ver. 4.03
Yes its possible to unlock the BIOS

Request for unlocking code

Similar Messages

Maybe you are looking for