Request forms, fulfillment, and automated outbound feedback form

Is there a way to "close" a response or mark a response as fullfilled and automate a form to be sent when it is closed, or a certain amount of days after it is "closed/fullfilled"? ie. an IT support form is filled out, maybe not urgent, the request is fuliflled, then a feedback response form is sent out like 7 days later to follow up on the incident.

Sorry it is not possible to automatically have FormsCentral send emails like described in this post.
You can 'mark' the data by adding a new column in the View Responses table and use this column to specify the state of each response. You can add a column by clicking on the plus button between two column header cells.
You can then manually email all the rows marked as 'fulfilled' and then change the new state column again so you know emails have been sent to these people. You can even use filtering to not see those rows anymore.
I'm assuming that you still want the actual form to be opened and juste 'close' issues (rows in your table) when they have been addressed.
Hope this helps
Gen

Similar Messages

  • Form Data and Automation

    I have a few questions about collecting data and automating a process with a form. I've created a sample form to illustrate my questions.
    I would like to create a PDF form which could be distributed among workers at an office. I'll send the form to the office manager and won't know how many people will use it or how many times it will be distributed. I realize I could create a webpage form to accomplish the same thing but I don't to require users to go to a website, register, and then submit the form. I think a form (if feasible) may be more user-friendly considering the users.
    Questions...
    1. I'd like the data to be collected in a database on my server. This shouldn't be an issue in a stand alone form but how would the following criteria effect this?
    2. When the data is stored into a database on my server, this triggers an automatic email to whatever company was checked under #1 (lite pink). Could a copy of the form be sent to each company sent without disclosing the other companies solicited? Only part of the form is visible? With comments, you can display but not print. Is there a way to use these capabilities for something like this?
    3. I'd like capture who's using the form so info in 2, 3, and 4 (red). Its important for me to collect feedback from the user on the effectiveness of this form. Did the companies reply with a price?
    4. I would like the companies to answer specific questions about their product (yellow). For example, specific price, warranty or delivery. Sometimes when asking companies for this information, they may or may not provide all this information in their response. By using this form as the platform for their response, the company would need to answer the specific information. So, can this form then be sent back to the user after completed by the company?
    5. The company my want to attach a written proposal along with the information on this form (green). Can they attach to the form?
    I assume other systems will need to be developed in conjunction with the PDF to accomplish this wishlist. Essentially, i want the PDF form to be the conduit for communication back and forth between the parties and I want to capture the data behind the scenes in my server. This may be outside the realm of possibilities of the PDF form and more appropriate through a website but a form with this group would be more user friendly and used more frequently. They wouldn't have to bookmark a website, register with a name and password, or seek out this website. The PDF sits on their desktop.
    Any thoughts on one or more of these questions would be appreciated.

    A PDF form can be set up to submit to a web server, so what you outlined can be done with a PDF form. Most of what you need will have to be done server-side, so someone will have to write the program on the server that pocesses the incoming submissions and takes appropriate action.
    You can set up certain fields to be required so that if they are not completed, the user won't be able to submit the form.
    To include attachments, there are basically two options.
    1. Set up a field to work like a HTML file upload field. This involves a bit of JavaScript in the form: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.734.html
    If using this method, it might be best to submit as "HTML" and process the form as though it were an HTML form, with the exception of the response (usually FDF) that must be returned. There is a lot of mature code/libraries available for processing HTML forms.
    2. Set up the form to submit the entire PDF, as opposed to just the form data. This requires that the PDF be Reader-enabled, which allows Reader users to attach a file as a comment and submit the PDF form + attachment. The problem is the server-side processing become more difficult since you have to find a way to extract the form data from the PDF. If everyone will be using Acrobat, or Reader 11 (or later, presumably), then the document does not need to be Reader-enabled
    There's more to know, particularly in dealing with security and the client-side issues relating to how Acrobat/Reader respond when submitting and receiving a response from a web server, but I hope this can get you started.

  • How to read User ID from the request Form and pre populating in the AD User process form before provisioning

    I am trying to read the user Id from the submitted AD User request form( Catalogue AD User form. I need User Id,firstname and lastname inorder to prepopulate the common name as in this format - lastname,firstname (userid)  for the user to be provisioned in Active Directory.
    So after filling the AD User request form with User Id and Organization and submitting the request, I am trying to
    prepopulate the common name in the process form before the provisioning.
    The prepopulate adopter for the common name is configured to read the firstname, lastname and userid. firstname and
    lastname variables are mapped to User definition and user Id is mapped to Process Data. In this setup I am not getting the
    User Id value from process data, it is empty.
    Is this a bug with OIM 11g R2 or I need to do it differently in order to read the user Id that user has entered in the
    request form for populating the common name?
    Thanks

    Ghulam Yassen wrote:
    How to get USER_ID and IP_AddressWhy exactly do you need this data and what do you plan to do with it?
    The data is not reliable and trustworthy. IP addresses can easily be spoofed (a few seconds if you know what to do and how to do it). Also, IP addresses are not static. Users also do not use the same network device to access the database - different devices will have different IP addresses.
    The o/s user on the client is supplied by the client driver. This can also be spoofed.
    The user can also use a virtualised device - which means that recording the IP and o/s user seen from the server side, is pretty much useless and meaningless.
    So if this data is intended to be used for auditing for example - it would be pretty suspect data to use for that purpose.

  • Standard warning messages in Vendor Request Form

    Hi All,
    Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
    For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
    Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
    These messages are displayed only at two places:
    1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
    2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
    I want to know, from where these messages are being populated and how to suppress these messages.
    Kindly suggest.
    Thanks in advance!
    Message was edited by: Oxana Noa Zubarev

    Hi All,
    Attaching the screen shot for refernce:
    After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
    There are we are getting these error message as highlighted above.
    Let me know if any info from my end would help in getting the root cause.
    Thanks in advance.

  • Display Request Form is not triggering in Standard SAP WDA : FITE_REQUEST

    Hi Guru's,
    In our Travel Scenario in NWBC, Once the employee finish the Travel Request he is unable to take print out by clicking on Display Request Form. Nothing is happening when we click on "Display Request Form".
    The Form I am using is FITP_REQUEST_FORM. It is displaying perfectly when I execute via SFP. The problem I am facing is nothing is happening when I click on "Display Request Button" in WDA
    Application:
    FITE_REQUEST
    Application Component:
    FI-TV
    Component:
    FITE_VC_REVIEW
    Window:
    VC_WINDOW
    View:
    REVIEW_VIEW
    Application Component:
    FI-TV
    Give me some lights to solve this issue
    Thanks,
    Namsheed.

    Hi Samuli,
    Issue is solved. It was Program Error from SAP side.
    Now All the buttons are working fine and I am able to print PDF also.
    Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
    System Details : ECC 6.0 NetWeiver 7.4 ,
                                EHP 7 , SP-Level 06
    Thanks a lot for all your suggestions.
    Regards,
    Namsheed.

  • Attachments on the Request Form

    Attachments on the Request Form
    I know you can add file attachments in the initial customer request by selecting the Add and Review Order button and attaching a file on the Order Review form.  But is there a way to have a file attachment button on the request form that will attach a file to the serivce request the same way?
    We are using RequestCenter 2007_1
    thanks
    CMH

    Here is an approach:
    1. Implement something like this on the file server:
    http://www.pscode.com/vb/scripts/ShowCode.asp?txtCodeId=7361&lngWId=4
    (We use an inhouse version of this)
    I would change this script to post back the file name to the parent window as well as some naming/size validations, etc ...
    2. Call the file upload functionality from your service fo

  • How to retrieve Request Form Data in OIM 11g for SOA workflows

    Hi,
    I have a business requirement wherein, I need to retrieve a field's value inside my SOA composite for further processing and decide on the Approver of the Request. Say for e.g. I'm having a field *"Country"* inside my Request Form, and what i need to do is, as soon as the request form is submitted, I need to retrieve the value for *"Country"* attribute inside my SOA Composite using Payload, and further process it. This scenerio is with respect to provision an application instance to a user.
    Now, in a similar scenario, where I was trying to create a user of type *"Contractor"*, I had used Request Service Api to retrieve the Basic information of the userform submitted, and decide on approval. Fortunately, the basic data like, First Name, Last Name, Login etc was successfully being fetched from the Request and I was able to perform further operations.
    Unfortunately, the same code which was working for Creation of a User, is not working when I'm trying to provision an application instance to the user.
    Below is the code which worked fine for me to retrieve basic request data for user creation, and isn't working for provisioning application instance:
    RequestService reqSvc = (RequestService)oimClient.getService(RequestService.class);
    String reqId = ((oracle.xml.parser.v2.XMLElement)getVariableData("inputVariable", "payload", "/ns3:process/ns4:RequestID")).getText();
    System.out.println("request ID: " reqId);+
    Request req = reqSvc.getBasicRequestData(reqId);
    List <RequestEntity> targetEntities = req.getTargetEntities();
    System.out.println("targetEntities : " targetEntities);+
    System.out.println("------------");
    for (RequestEntity rea : targetEntities)
    +{+
    List <RequestEntityAttribute> attributes = rea.getEntityData();
    for( oracle.iam.request.vo.RequestEntityAttribute attribute : attributes)
    +{+  
    System.out.println("Attribute.getName() : " attribute.getName().toString());+
         if(attribute.getName().equals("User Manager"))
         +{+
    beneficiaryManagerKey = attribute.getValue().toString();
         System.out.println("User Manager : " beneficiaryManagerKey);+
    +}+
         e+lse if(attribute.getName().equals("User Login"))+
         +{+
    userid = attribute.getValue().toString();
         System.out.println("User Login  : " userid);+
    +}+
    +}+
    +}+
    Any pointers to this would be of a great help.
    Regards

    List <RequestEntity> targetEntities = req.getTargetEntities();
    System.out.println("targetEntities : " + targetEntities);
    System.out.println("------------");
    The above piece of code retrieves the attributes and their values from the request form while creating a user, but not from the request form, which provisioning a resource to a user.
    Regards,

  • Question on the upload attachments process in a request form

    hi,
    I have a question on the upload attachments process in a request form. I have 2 pages, one is a request form and the other is an attahment page
    The request form let users fill the mandatory fields (e.g. name, email, address...) And in the form, there is a link (URL without submit) to the attachment page.
    In the attachment page, users can upload the supporting file for their rquest. The file will be uploaded to APEX_APPLICATION_FILES view and then it will be copied it to a customized table (table A) and remove from the view.
    When the users finish uploading files (i.e. the files are stored in table A), users need to press a "Done" button back to the request form to submit the form.
    My question is:
    As the request form is not yet submitted while the attached files are stored in table A, there is no request_id (request from table primary key generated in an Insert trigger after submission) is generated to tag with the files in table A. Is there any standard practice to do this?
    What I am doing now is to generate a hidden value in sequence when user goes to the attachment page. The hidden value is stored in table A togehter with the files when uploading. When user goes back to the request form, the hidden value is passed back as session cache. When the request form is submitted, I make an update statement by using the hidden vaule in the Insert trigger to tag the request_id to the attached files in table A.
    Is my way appropriate?
    Thanks for advice.
    cheers,
    Pong

    Pong,
    Yes, this would work just fine. You may want to consider enabling session state protection so that your process is not succeptable to URL tampering, which would cause a user to change the value of the REQUEST_ID in the URL and potentially associate other attahments with their request.
    Thanks,
    Scott

  • Error while displaying Travel request form (ABAP WD :FITV_TRIP_FORM )

    Hi
    When I am trying to create a travel request form , and then trying to display form its throwing an error
    "The following error text was processed in the system ECD : Error in module RSQL of the database interface".
    The error occurred on the application server mtserpdev_ECD_00 and in the work process 0 .
    Kindly suggest as form "FITV_TRIP_FORM" is already attached via feature . Am I missing some config or
    Is it a issue of patch. (Currently we are at EHP 4 , and all the applications inlcuding FITV_TRIP_FORM are on WD ABAP).
    Thanks
    Abhay

    Have you done the TRVFE feature configuration and made sure if this form exists in the system.
    Regards,
    Divya

  • Need to display a Disclaimer on the request CUP request form

    Greetings,
    As part of the organizational Request, I need to include a disclaimer on the AE request form, the person needs to agree or disagree to the disclaimer during submission/approval.
    I tried doing it in multiple ways but was not able to succeed with the requirement:
    Approach 1:  Custom field "DROP DOWN" text made it mandatory field to select the either the user agrees to the disclaimer or not. The issue with it is the disclaimer is about 200 characters and the field restriction on the custom field is 40 characters. Does not work as I intended to.
    Approach 2: Custom Field "Text" made the field as default and provided the default 200 character sentences into the text field. Though I provided the default value it does not show up in the text box and comes up blank, does not solve the requirement.
    Optimal approach : If could do a disclaimer on the request form with a check box and force the user/approver  to check the box would solve the purpose.
    Do anyone of you can suggest or show a way where either I can increase the drop down text size from 40 to 200 characters or display the disclaimer with a check box or probably I can then use the drop down list as "Agree" vs. "Disagree"? Will be helpful.
    I have also need to make a validation that states not to approve/provision the access if the disclaimer is set to 'disagree"
    Any help will be greatly appreciated.
    Best Regards,
    Angara Rao

    Greetings All,
    As an update to my earlier question. SAP came back asking me to log this an an enhancement for future releases using SAP note 1575897 . I have logged it with them and hopefully we will see an solution in hot packs/Next releases.
    As a current solution, We have placed a disclaimer text on the Portal Landing page and have marked with a "Accept" or "Decline" push buttons. The push buttons stores the user identity, date and Time stamp in a custom table for validating purpose and while the accept button launches the GRC CUP application.
    The above was created as a prototype and not currently in use untill signed off from the concerned department head & Global policy head asking for this information.
    Best Regards,
    Angara

  • Work request form in workflow

    Hi All,
    Do you have any idea how to create notification and work order automatically into SAP from Work Request Form for visiblity into cost of resource and material prior to commitments.
    Thanks

    Answered

  • GRC 10.0 SP 14 access request form displays unassigned roles

    Dear experts, when I open the Access Request form and I select a user, and then I click on existing assignments, I am shown a list of roles and systems assigned to this user. However, when I go to those corresponding backend systems to see if the roles are actually assigned, it turns out that they are not. I have rerun all the sync jobs and they all completed successfully. Auto provisioning works on all these systems and there are no issues in terms of the RFC. However, as indicated by the attachments, it continues to show rules that were unassigned from this user some time ago. where might these assignments be coming from?

    Hi Santosh,
    did you run the repository object sync job in full mode for this connector? This has mostly to do with outdated sync information as you can also see in the following note:
    http://service.sap.com/sap/support/notes/1667112
    Please check again.
    Regards,
    Alessandro

  • Customer Master Creation -- Request form template

    Hi ,
    Is there anyone could provide me the request form template for customer master creation ?
    We would like the request department fill this and pass it to the master data creation person .
    Thanks and regards
    Shubin

    Hi ,
    Please go through the below link to create the Customer creation in SAP.
    http://help.sap.com/saphelp_ides/helpdata/en/47/ef8c64124811d2806f0000e8a495b3/content.htm
    Regards,
    Pasapula.

  • How to open Report output in RTF format using concurrent request form.

    Hi
    I have created a report using BI publisher and RTF format. This report is working fine in PDF format. User can submit report using consurrent request form and can see report preview in PDF format.
    Now user wants to submit another request and wants to see report output in RTF format.
    User submitted a request, request successfully completed and generated a output RTF file in unix box but when user wants to see report output using concurrent request form (View Output) then window is showing raw data instead of RTF output.
    Can any body tell me about solutions?
    Thanks
    Ravi

    Hi Ravi
    I did little R&D on it and found following 2 solutions.I am sure that you also find something but for my shake i am putting it here.If you already find the solution then ignore it.
    I) 1st Solution
    1)Change the profiles 'Viewer: Application for Text' and put value as 'Browser'
    2) Change the profiles 'Viewer: Text' and put value as 'Browser'.Either change it system level or concerned user.
    3) Log out from Current session and close all internet explorer application.
    4) Log in again to check the result
    II) 2nd Solution
    1) Navigate to: Sys admin --> Install -> Viewer Options to open the Form "Viewer Options".
    Do the entry as shown below:
    File_Format     Mime Type               Description
    RTF          application/rtf Microsoft Word(.rtf)
    RTF          application/msword          Microsoft Word(.rtf)     
    2) Then ensure that the profile option Viewer: Application for Text is set to BLANK at the Site Level and User Level.
    3) Then ensure that the profile option Viewer: Text is set to 'browser' at the Site Level.
    -- It will pop-up the screen to choose application name from above two values.
    Hope this will work it for you. For me i replicated the scenario and both solutions were working for me.
    With Best Regards
    Darshan Bhavsar

  • How to create software request form using Info path functionality?

    Hi All,
    i am trying to create a Software Request Form using Info path functionality. Following are the steps:
    1. Users will fill out the form with all necessary fields.
    2. once they click on Submit button, it will send an email to two specific groups with a link so that they can see the form and Approve/Deny or can put comments on that.
    Thanks in advanced!

    Hi Rakib,
    There are many ways you can achieve this.
    Either by Creating a SharePoint list and then modify it using InfoPath to get all your required fields added
     or
    Use InfoPath application and select any template or blank form template to get all your required fields added and then publish it to SharePoint site
    For the second step you can create an OOTB workflow which can send email to view an approve items using Approval workflow feature
    For the advance notification you can use SPD workflows as well.
    Refer this article for more on InfoPath and SPD integration - http://gallery.technet.microsoft.com/office/Step-By-Step-build-30f84363
    Let us know if this helps, thanks
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

Maybe you are looking for

  • How to find out if a table has been changed?

    hello how can I find out in a zreport, if a specific table has been changed and  data has been added or deleted? like for instance the date of last change to the table? thanks Alisa

  • 10GB of disk space mysteriously used overnight.

    Hi all, I left my MacBook on today when I went out, and it reported 27.99GB of space free, and I came home to find I have 17.34GB of space remaining. I've not installed anything or done more than open Safari and iTunes. Given I'd just been on a data

  • Need to disable "Block Anonymous Internet Requests" with "Clone MAC address?"

    Ok -- so I learned from tech support and this forum that the "Clone MAC address" option needs to be enabled when connecting to the Internet via a cable modem. In one of the forum posts (sorry lost track of which one), it said that in addition I need

  • USBTMC device does not show up in MAX.

    I have a USB device that will not show up in MAX.  When I plug the device into the computer, it is recognized as a USBTMC device and Windows chooses NiUsbTmc.sys as the driver.  I believe it also uses niusbtmc.inf and niusbtmc.pnf.  After going throu

  • Swatches Palette Kills Productivity

    Having issues with the "swatches" palette. Everything comes to a crawl and the spinning beach ball is getting really annoying. When that window is closed/collapsed/or returns to "basic" window view the app runs clean – no holdups. But click on the "s