Request giving Socket communication error at call=recv: error.

Hi All,
My requirement goes like this for OBIEE 11G :
I have two requests(analysis) and I want to show either of them at a given time based on a Dashboard prompt. I have set a Presentation variable {PV} for this Prompt whcih always hays two values A and B.
My first request is like this :
Dim 1 Measure 1 ( this should be shown when I select Dashboard Prompt A.
My second request is:
Dim 2 Measure 2 ( this should be shown when I select Dashboard Prompt B.
I have to use the Guided Navigation ( Sectional Condition in 11g)
When Dashboard Prompt A is selected Section 1 i.e. Request 1 should be shown when Dashboard Prompt B is selected then it should show request 2.
To achieve this in request 1 I have added a extra filter '@{PV}' is equal to/is in 'A' and in request 2 I have added a extra filter '@{PV}' is equal to/is in 'B' so as when we select B in Prompt the first request should 'No Results' so as I can achieve my Guided Navigation.
But to my surprise when I select B in the Dashboard Prompt the first request throws an error.
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 12002] Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
Please help me out with this regards as I was able to achieve this functionality easily in 10G OBIEE.
Regards,
Bhavik

Hi,
Mistakenly my machine got restarted and after that when I tried to start OPMN services,its showing all the processes alive but after that ,while restarting BI services from windows
its throwing an error of unexpectedly shutting down of services.
My NQS log says:
[nQSError: 12010] Communication error connecting to remote end point: address = 192.168.10.209; port = 80.
[nQSError: 46119] Failed to open HTTP connection to server 192.168.10.209 at port 80.
I have checked that IP is still same. What is the issue behind it?
This is very urgent.I have already posted this issues many times but didn't get any response So please help.

Similar Messages

[nQSError: 12002] Socket communication error at call=recv: (Number=10038)

Hi, When I try to run any reports in Oracle Answers I am getting the following error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred.
nQSError: 12002 Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
When I try to issue a 'Direct Database Request' from Answers, it is working fine and I can see the results. The error is occuring only when I select any columns from the Presentation Catalog and try to run the Adhoc report.
Please could you help me fix this issue.
Thanks
Srikanth

Hi, When I try to run any reports in Oracle Answers I am getting the following error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred.
nQSError: 12002 Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
When I try to issue a 'Direct Database Request' from Answers, it is working fine and I can see the results. The error is occuring only when I select any columns from the Presentation Catalog and try to run the Adhoc report.
Please could you help me fix this issue.
Thanks
Srikanth

[nQSError: 12002] Socket communication error at call=recv: (Number=10004)

Can any1 plz help...!
I am unable to start presentation services...! I am currently using windows server 2003 service pack 2. I tried configuring scheduler after which I got the message:
"Windows could'nt start Oracle BI Presentation server on local computer. For more information review the system event log. If this is a non-microsft service, contact the service vendor, and refer to service-specific error code -1."
I am getting these 2 errors:
In nqserver.log shows below error
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
In nqscheduler.log shows below error
[nQSError: 12002] Socket communication error at call=: (Number=10048) Only one usage of each socket address (protocol/network address/port) is normally permitted.
I have changed scheduler port (in Job manager-->file-->configure options..>schedule-->general tab) to an available open port since 9705 is not available. I also updated port number in instanceconfig.xml file.
Any suggestions would be really appreciated.

have you seen the blog of John about this? http://obiee101.blogspot.com/2008/08/obiee-configuring-configuring-scheduler.html
hope this heps

[nQSError: 12002] Socket communication error at call=(Number=10004, 10048)

Can any1 plz help...!
I am unable to start presentation services...! I am currently using windows server 2003 service pack 2. I tried configuring scheduler after which I got the message:
"Windows could'nt start Oracle BI Presentation server on local computer. For more information review the system event log. If this is a non-microsft service, contact the service vendor, and refer to service-specific error code -1."
I am getting these 2 errors:
In nqserver.log shows below error+
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
In nqscheduler.log shows below error_
[nQSError: 12002] Socket communication error at call=: (Number=10048) Only one usage of each socket address (protocol/network address/port) is normally permitted.
I have changed scheduler port (in Job manager-->file-->configure options..>schedule-->general tab) to an available open port since 9705 is not available. I also updated port number in instanceconfig.xml file.
Any suggestions would be really appreciated.

user12970693 wrote:
Can any1 plz help...!Gawsh. That's awful.
I wonder whether people who deal primarily with BI Server might be able to help you better than people who deal primarily with the database?
http://forums.oracle.com/forums/category.jspa?categoryID=145
I am unable to start presentation services...! I am currently using windows server 2003 service pack 2. I tried configuring scheduler after which I got the message:
"Windows could'nt start Oracle BI Presentation server on local computer. For more information review the system event log. If this is a non-microsft service, contact the service vendor, and refer to service-specific error code -1."
I am getting these 2 errors:
In nqserver.log shows below error+
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
In nqscheduler.log shows below error_
[nQSError: 12002] Socket communication error at call=: (Number=10048) Only one usage of each socket address (protocol/network address/port) is normally permitted.
I have changed scheduler port (in Job manager-->file-->configure options..>schedule-->general tab) to an available open port since 9705 is not available. I also updated port number in instanceconfig.xml file.
Any suggestions would be really appreciated.On first guess, I'd almost think some anti-virus or firewall is haunting that machine.

Socket communication error

I am facing a problem in presentation server .
When i am using AGO date functions i have encountered an error named as.:
nQS Error:12002 : Socket Communication error at call=recv (number=10054)
I have goggle'd it but cannot understand thier explanation ...

Hi,
Mistakenly my machine got restarted and after that when I tried to start OPMN services,its showing all the processes alive but after that ,while restarting BI services from windows
its throwing an error of unexpectedly shutting down of services.
My NQS log says:
[nQSError: 12010] Communication error connecting to remote end point: address = 192.168.10.209; port = 80.
[nQSError: 46119] Failed to open HTTP connection to server 192.168.10.209 at port 80.
I have checked that IP is still same. What is the issue behind it?
This is very urgent.I have already posted this issues many times but didn't get any response So please help.

Socket communication error in OBIEE 10g.

Hi
I have below error in nqserver log by which i am unable to connect admin tool and presentation service. I am using OBIEE 10g.
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall
Please Suggest.

Hi ,
Its not about the no. of connection pools u have in ur RPD .Its the maximum number of connections allowed for this connection pool. The default is 10. This value should be determined by the database make and model
and the configuration of the hardware box on which the database runs as well as the number of concurrent users who require access.
Ref :
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/oracle-bi-server-stops-automatically-after-some-time-3645235
Just give it try .

BI Server Socket communication error

All,
OBIEE 10G with Oracle 11 database on Sun solaris.
BI Server is randomly crashing with following error message:
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 0. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 12008]
Unable to connect to port 9703 on machine LOCALHOST. [nQSError: 12010]
Communication error connecting to remote end point: address = LOCALHOST; port = 9703. [nQSError: 12002]
Socket communication error at call=: (Number=-1) Unknown error (HY000)
If you restart, it works fine for 1-2 days. Then again crash happens.
Any ideas ..?
~R

I've had similar issues due to insufficient memory on HP-UX. Probably best to raise a support log with oracle.

How to correct socket communications error 10054: connection reset by peer

We are running Lookout 5.1 (build 8) reading data through Modbus Ethernet Drivers and we are constantly getting "socket communications error 10054: connection reset by peer" alarms on the server. When I connect to the server file with a client file the client is experiencing communications problems including locking up when editing, trends not showing up, stops updating completely (can only be corrected by restarting server file), and losing symbolic link.
Does anyone know how to stop this alarm from happening and if this could be the cause of my faulty server-client connection or is this strictly a problem between the server and the ethernet radios in the field?
Any response would be appreciated.
Thanks!
Jason
Jason Phillips

DST1,
All I had to do was increase the receive timeout in each driver's properties until the socket errors disappeared. I have them all set to 30000 msec. Communications have been great on this wireless ethernet system ever since.
Sorry for not answering sooner - needed to make time to go back and look at the file and then TS Lee came our way!
Jason Phillips

Flex profiler: giving socket timeout error

Hi,
I am using Flex 3 Builder. With Flex 3 SDK and overlayed AIR 2 sdk. When I try profile my AIR app, I get "Socket Exception" in the console.
I tried editing the mm.cfg manually but it seems not working. (Followed various posts in forums/blogs). But no Luck.
I observed the mm.cfg file, keeping it blank, Flex Builder does write the PreloadSwf argument in it. For a while, and then it goes blank after throwing the socket error.
I don't have Firewall on as well. I tried with both direct connection to internet and with Proxy.
Any ideas on what's going on ?
Thanks,
Brijehs

Tried all above, still getting the same exception

MDM_TECH 554_700 ABAP API giving socket connection error

Hi,
I have recently installed the MDM_TECH 554_700 on a 64Bit R/3 system and configured the ABAP API thru customization for a 32Bit MDM Server. Currently I am facing a problem with 'NiRaw2ConnectError: Connection refused' error and when I checked the detailed log it shows that "ERROR => mdeKernelError, NiRawToConnectError: The attempt to establish a socket connection caused an error (rc=-10) [mdm_mdeClien 265]". I have checked the necessary kernel files ( dw_mdm.dll) to make the socket connection between the MDM system, the OSS note 965209 & 950245 and not able to trace the problem. Is it possible to make the connection between 64Bit R/3 and 32Bit MDM server? Help on this issue is highly appreciated.
Regards,
Velu

Alejandro,
The MDM ABAP API & MDM Server Versions are same. Both of them are in SP04. Here is the details on the versions:
MDM ABAP API - MDM SP04 provider, Server build 5.5.32.48 - 5.5.32.x
MDM Server 5.5 - SP04 ( 5.5.32.65)
Regards,
Velu

Communication error with Epson R2880 printer using Snow Leopard 10.6.4

I am having trouble printing with my Epson R2880 printer on my Mac Pro running OS X 10.6.4 with the most recent software updates. The printer prints about a quarter of the print and then quits giving a "Communication error" message. I have tried uninstalling and then reinstalling the printer and downloading the latest driver form Epson. My other printer, a cheap Canon printer, works fine on the computer with 10.6.4 and the R2880 printer works fine with my old G5 running 10.4.11. Any ideas?

Thanks John. I tried deleting the Epson printer folder from the library like you said and then checked for Software Updates. But Apple did not indicate that there were any for my OS (probably because I had installed the latest OS update this morning). So I installed the driver from the Epson site with the printer folder removed. But this did not work because when I tried to print the computer indicated that there were missing files. So, I reinstalled the Epson folder that I had just moved to trash, deleted the new Epson folder, then tried reinstalling the Epson driver with the original folder in place. THIS WORKED! Finally, I am off and printing but with little knowledge gained about the inner workings of my computer.

A communication error has occurred:An XML element was malformed(call to SP)

Hello experts,
Visual Composer tells me in a pop up, that:
"A communication error has occurred:An XML element was malformed"
when it tries to call a Stored Procedure (SP). This is s.th. that happens only sporadically, i.e. I can trigger the SP many times and see that it executed correctly. Then, suddenly it doesn't work anymore, but when I keep clicking it starts working again after a while.
I checked that nobody has opened or locked my model, because I read that this can cause this behaviour in another thread.
What is the cause for this? What can I do?
I'm looking forward to your replies and will reward with points,
Sincerely,
Florian

Hi ,
wht ever u said is absolute correct
xml error , 32k span error , portal request failed errors are usually cmng in vc
sometimes it will work and sometimes it wont work tht tine we have to reimplement our task .
can please help any one thse error in vc7.1
Regards ,
venkat

System log shows operating system call recv failed(error no.73)

hi all,
here i have some doubt in system log please clarify me,
here in my (sm21)system log files i find more no of logs for dispatcher and it indicates operating system call recv failed(error no.73)
system log Short Text shows:
Operating system call &5&5&4 failed (error no. &>E5)
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors are network problems.
It could also be a configuration problem at operating system level. (file cannot be opened, no space in the file system etc.).
what is means

Hello,
Yes, you are right, these kind of problems (OS Error 73) are usually caused by network issues. Error 73 means 'connection reset by peer'. In most cases, this is because the connection was interupted by the communication partner or an active network component between.
I provide you some recommendations:
- Check your Network environment. You can use NIPING tool to diagnose it (note 500235), check your MTU stability.
- Check note 27320 - keep alive and gui_auto_logout profile param
- Also you can implement note 1002075 for a possible solution
I hope this helps you.
Regards,
Blanca

Communication error when calling web service for checkin and checkout files

Hello,
I am trying to checkout and also to checkin files within the DMS via web service. The files are stored in the VAULT (=TRESOR) without the data server parth and DVA computer.
For checkout:
Original zum Ändern auschecken
CALL FUNCTION 'BAPI_DOCUMENT_CHECKOUTMODIFY2'
    EXPORTING
      documenttype    = pi_documenttype
      documentnumber = pi_documentnumber
      documentpart    = pi_documentpart
      documentversion = pi_documentversion
      documentfile    = lf_documentfiles
      pf_http_dest    = ''
      pf_ftp_dest     = ''
    statusextern    = lf_status
    IMPORTING
      return          = lf_return
      checkedoutfile = ls_checkedoutfile.
and for checkin:
Dokument einchecken
CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
    EXPORTING
      documenttype    = pi_documenttype
      documentnumber = pi_documentnumber
      documentpart    = pi_documentpart
      documentversion = pi_documentversion
      hostname        = ''
      statusintern    = ''
   statusextern    = lf_status
      statuslog       = ''
    IMPORTING
      return          = lf_return
    TABLES
      documentfiles   = lt_files.
But it is not working cause I always get a 'communication error' from the function CV120_FTP_START_REG_SERVER when calling one of these BAPIs via web service:
IF pf_check_gui = 'X'.
    CLEAR: gf_gui_exist,
           gf_gui_checked.
    CALL FUNCTION 'RFC_PING'
         DESTINATION 'SAPGUI'
         EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                     system_failure        = 2 MESSAGE lf_msg_text.
    IF sy-subrc = 0.
      gf_gui_exist = 'X'.
    ELSE.
      CLEAR gf_gui_exist.
    ENDIF.
    gf_gui_checked = 'X'.
ENDIF.
Afterwards the following function is called where I got the error 'Program no longer started via RFC. No return possible.':
-> Vault with DVA -> ** Start FTP on the client
CALL FUNCTION 'SYSTEM_START_REG_SERVER'
       EXPORTING: progname    = 'sapftp'
                  startmode   = ''                          " X
                  exclusiv    = 'Y'
                  waittime    = 500
                  startcomp   = 'C'    " G=gui, C=RFC
                  startpara   = ' '
      IMPORTING: err_code    = lf_errno
                 err_mess    = lf_error_msg
                 destination = pfx_destination.
Regards
Jens

Hi! As mentioned below I had the same problem.
There are two notes concerning security setting of the SAP Gateway:
1069911 - GW: Changes to the ACL list of the gateway (reginfo)
1480644 - gw/acl_mode versus gw/reg_no_conn_info
Your basis team should check if the Gateway settings allow external programs to register on the gateway.
Best regards
Dominik

Idoc Processing Error - Communication error calling XI interface

Hi All, We in the middle of our upgrade from IS-PS-CA 472 to ECC6 and are facing issues processing old Idoc's with status 64 via BD87 the error message says that "Communication error calling XI interface". We have not implemented XI at this point in time.
Can anyone please advice why this is happen is this something to do the SAP version.
Please help.
Rgds
Saj

Can you provide the message number.
Reddy

Request giving Socket communication error at call=recv: error.

Similar Messages

Maybe you are looking for