Request Group to a user

Hi,
Can we add a request group to a user?
Regards,
Kr

How is this possible???Note: 457519.1 - How to Submit a Concurrent Request Using CONCSUB Syntax
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=457519.1
Note: 218989.1 - How to Submit Concurrent Program Report Set from the Operating System
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=218989.1

Similar Messages

Configuring group policy for user profiles in Windows Server 2012 R2 Domain

Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.

Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

Not able to add groups to the user ODSEE via OIM 11g R2

Hi,
I have created some groups in ODSEE and ran the recon job to sync these groups in OIM 11g R2.
Groups are populated in OIM 11g R2 and while raising the request for ODSEE Application Instance I can see these groups.
Now following are the issues I am facing :
1. ODSEE groups are not getting displayed in Catalog ( I have ran the Entittlement-List job also)
2. When I request for a group while creating the request, the group is not getting assigned to the user in ODSEE, wherein user is getting created in ODSEE successfully.
Please help.
Thanks

Please let me know what could be the reason of not adding the groups to the user in ODSEE.
I was able to add the groups successfully to user by assigning the groups while raising the request in OIM 11g R1.
But the same is not working in OIM 11g R2, if I check the OIM logs it is calling the function ADDUSERTOGROUP but the groups are not getting assigned to user.
Thanks

Plug-in Request Group field into the external authentication plug-in

Hi all,
I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field.
I've made some tests adding some users into groups OracleDASAdminGroup, OracleUserSecurityAdmins and groups that I've created under my DC settings. Unfortunatly, I've had no success.
Is possible to do this?
Thank you.
Message was edited by:
user571491

Hi all,
I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field.
I've made some tests adding some users into groups OracleDASAdminGroup, OracleUserSecurityAdmins and groups that I've created under my DC settings. Unfortunatly, I've had no success.
Is possible to do this?
Thank you.
Message was edited by:
user571491

Request Group on Responsibility?

Dear all,
I have a question and it is very strange. I have 2 responsibilities like "0000 AP Super User", "0001 AP Super User" and they also attahced request group with '0000_AP_SM_RG". However, "0000 AP Super User" responsibility able to see one report and submit that report and the other one cannot.
Then I checked "exclude" function on responsibility, I found nothing. Then I back o request group "0000_AP_SM_RG" to see include this report, I found nothing again.
Can anyone tell me what I have donw wrong?
Please kindly advice.
Thanks.

What is the apps version ?
Pls clear cache and recheck
How To Clear The Cache Using Functional Administrator? [ID 759038.1]
How To Clear Caches (Apache/iAS, Cabo, Modplsql, Browser, Jinitiator, Java, Portal, WebADI) for E-Business Suite? [ID 742107.1]
thanks

Which group is a user member of ?

Hi
I am using Iplanet 5.1. I have searched almost everywhere
for a solution for this :
How du you see which groups a user is member of ?
Hope one of you have the solution
Vh.
Finn

Dynamic group is not a group (I mean entry containing list of members) but an entry containing one ldap filter.
e.g. Mygroup (dynamic group) "contains" all users in Tokyo. ldap filter is (l=tokyo).
That's it. No member. Nothing but ldap filter.
As a result, if you want ot check ALL groups user belongs to, you will have to:
1 - retrieve user's DN.
2 - search all groups where uniquemember=[DN you retrieved]
3 - retrieve all ldap filters describing dynamic groups.
4 - check for each of them, if filter applies to user's entry. This can be done by either building the static group matching dynamic description and then compare uniquemember (can be VERY heavy) or by comparing filter against user's entry. Is location (l) = tokyo for this user ?
As you may understand, managing dynamic groups is not compatible with your request that is to retrieve all groups user belongs to. This is why - I suppose - version 5.x brings "roles". With roles, this information is stored within user's entry. This is easier for you. On the other hand, this is heavier if your goal is to retrieve all members of a given role. Nothing is perfect.
You do have to understand your goal and how you will manage it before deciding if you will use static groups, dynamic groups or roles (or most likelly, all of these features).
All have pros and cons.
Christian

What is difference between user group and reference user group?

hi
guys,
what is difference between user group and reference user group?
your regards
p.suresh

Hi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

Get all Groups for current user

Hi I try to get all groups for the current logged on user. This is what I do:
First I try to search with the IGruopSearchFilter to obtain all unique Group IDs. I always get an proxy error by doing this, maybe the query is to much.
Then I want to use the method group.isUserMember(user.getUniqueID() to check whether the user is a member of that group or not.
Is there a better way to obtain all groups for a user (without using a query IGroupSearchFilter)?
Thanks ahead for your help.
Burkhardt

Burkhadrt,
have you tried this?
https://media.sdn.sap.com/javadocs/preNW04/SP2/60_sp2_javadocs/ume/com/sap/security/api/IUser.html#getParentGroups(boolean)
This should give you an iterator for all groups the given user is assigned to.
Hope it helps... and if so:
if (helpful) {
points++
Regards,
Dominik

FNDLOAD: How to remove a concurrent program from a request group

Hi,
I want to remove a concurrent program from a request group using FNDLOAD utility. Since impacted environment is Production (controlled environment) I do not want to remove concurrent program manually from the request group. Is there a way to use FNDLOAD utility for this purpose or some other means?
Environment: Oracle EBS R12.1.1
OS: Linux
Thanks,
Nitin

Hi,
Unfortunately this CP cannot be disabled as it has to be removed from certain RGs but not all. Also removing it through RG forms is always an option but production gatekeepers won't allow to do that. I would have done that in a min.
If FNDLOAD is not an option then I guess only other option is pl/sql script.
Best regards,
Nitin

How can we assign more than one request group to a responsibility?

Hi
Can anyone tell me how we can assign more than one request group to a responsibility?
Thanks
SS

Hi SS,
Its not possible, rather you should create a combination of Requests/RequestSets and create a new Request Group.
Regards,
Kiran

Assigning Mobile Group to a User

I plan to use the <i>Mobile Group</i> filter for a SyncBO, to avoid too large data volumes on clients - BUT I find it very hard to administer through MEREP_PD and impossible to assign a user to a mobile group in advance of application deployment.
We are dealing with approx. 30 users and they should be allocated to 6 different Mobile Groups. Is there a way to allocate Users to Mobile Groups in advance of application deployment ?
Thanks.
Lars

after creating user in OID (which creates a user for portal also) You shold run the procedure in the portal schema:
PROCEDURE setdefgroup (
p_username varchar2,
p_groupname varchar2) IS
v_group_id number;
BEGIN
v_group_id := WWSEC_API.GROUP_ID
(p_name => upper(p_groupname));
wwsec_api.set_defaultgroup
(p_groupid => v_group_id,
p_username => upper(p_username));
END;
to asign the default group to a user.

Move a query to from one user group to another user group

Hi,
it's possible to move a query (SQ01) from one user group to another user group ??
Thank you.

Hi,
You can copy queries only if you have the authorization to make changes. Within your current user group, you can copy all queries. However, queries of other user groups can only be copied if the InfoSet used to define the query is assigned to both user groups.
To copy a query, proceed as follows:
1. Choose the name of the query you want to copy on the initial screen.
If you do not know the name, use the directory functions to display the query directories and then choose a query to copy from there.
2. Choose Copy.
3. Enter the name and the user group of the query that you want to copy in the dialog box. Furthermore, you must enter a name for the copied query. The system proposes values for this.
4. Choose Continue.
This takes you to the initial screen. The query is added and appears in the query directory. You can now continue.
Regards,
Amit

Unable to see Active Directory Groups in the User Profile Database after Profile Import

***Major Update - I have finally been able to get the direct attention of the folks responsible for the User Profile Service on the SharePoint Product Team. Long story short, they have reproduced the error and identified as an actual mistake
that needs to be fixed, so it is now officially in the bug pipeline and will be fixed. The current estimate is some time in the summer. They will keep me updated with timeframes, which I am allowed to share as time goes on.
SharePoint Server 2010 Enterprise RTM. W2K8R2 w/multi-server setup:
AD/DNS
SQL 2008
WFE
APP
Claims Mode Web App only using Windows Integrated Auth
So, this was never a problem in 2007, and I didn't even realize it was a problem in 2010 until I started to build a solution that utilized my blog article:
InfoPath - User Roles in Browser-Enabled Forms Using AD Groups. I went to utilize the same web method of the same web service, but I noticed that no data was showing up at all. Typically,
the GetUserMembership/GetCommonMembership methods return the specified user's memberships: AD Security Groups, AD Distribution Lists, and SharePoint Sites (not SharePoint Groups, though).
My user profile sync is working. All AD users are pulled in with the proper profile data.
"Users and Groups" is selected in the Synchronization Entities section of my Sync Settings.
Security groups are working for permissions and audience targeting. Confirmed my users are affected properly by the use of Security Groups.
My query to the GetUserMemberships web method (and GetCommonMemberships) is running (not failing), but it's not returning anything even though my user is in some Security Groups and has explicit membership to multiple sites.
The GetUserProfileByName method of the same UserProfileService.asmx web service
returns all the regular profile data like expected, so the web service works and my profile database is populated
Basically, I'm not seeing my AD groups or any membership data populated in the profile database. I did use MIISCLIENT.exe to see what I could find, and here is what I saw:
Using the Metaverse Search, I searched for the "person" type and saw all of the users in my profile sync connection (single OU)
Using the same tool, I searched for the "group" type and saw nothing, but the message said 4 items were retrieved
I realized that the only column showing was displayName, and they were blank, so I added other columns to be sure
objectGUID, objectType, distinguishedName all showed values, and I could now see all the Security Groups from the OU where I'm doing my profile sync
My "person" objects all have displayNames showing but none of the groups do. In SharePoint, the GetUserMemberships method relies on displayName and accountName, but neither are coming through the profile import
So, it does seem like the groups are coming in with the profile import, but I can't see them. I also can't verify that the groups are being associated with my users in the profile database, because doing a query to the membership methods returns nothing...not
even blank rows.
***Edit: New information! Regular AD Distribution Lists _do_ work properly. I just never bothered testing them until folks on my blog notified me. DLs come through the profile sync, are visible in the profile database, and show up
when using the GetUserMemberships method.
***Edit: Ok, now we're getting somewhere. I checked my last profile sync with the MIISCLIENT, and this is what I found:
Here are the properties of my Distribution List:
Here are the properties of my Security Group:
Notice that the groupType value of the DL is a normal integer (2), but the groupType value of the SG is some crazy negative number. Both types are still lacking DisplayNames for some reason, but when I retrieve the DL via GetUserMemberships, it DOES
show the proper DisplayName despite nothing showing in the MIISCLIENT.
SharePoint Architect || Microsoft MVP ||
My Blog

Hello Clayton,
I have same problem with SP 2010 and now I am testing SP 2013 and seems that the problem still.aa
Probably I have some configuration problem, but all seems work, except this.
SharePoint 2013 has no improvements on this. Until seeing this thread, I thought it was an issue within my farm configuration or AD Service account for User Profile Sync. And I've dug far and wide for any other possible settings which would prevent users
from populating in the site people-picker. This might be flagged as off-topic, but I'll beg differ. How can I expect SharePoint to retrieve AD Users and Groups for accuracy in the sites which rely on this server??? Frustrating. I've spent hours and days on
this! I have 3 SP2013 farms with multiple clients (different OU's/containers and security groups). Testing in a separate QA DEV farm with the same config. NO luck yet!
This is where I'm at with it (posted this as a question recently on SharePoint Stack Exchange):
"Help.... Please.... Users from AD groups are not populating in the site people picker. I've set up a SharePoint 2013 site collection permissions group with only AD groups in it, no users added directly. Whether or not I give this SharePoint group permissions
to the site content, I still get none of the AD users showing up in the people picker. I have done the iisreset after adding the groups.
I've checked all of the people picker properties in stsadm to be sure there are no constraints in effect on the web app or site collections. User profiles are synching and I've tried both AD import and User Profile Sync. The AD groups are security
groups, though not email-enabled. The AD service account has all the special permissions. My web app is claims based. My app pool runs with Network Service account. No policies in place to restrict users, checked CA and the site collection settings.
What am I missing? I've read in multiple places that this is a supported/working config. So why can't I get these users to populate in people picker for things like Assigned To in a tasks list, or attendees of an event? "
There is some pretty good insight here, but no real hope:
User profile
synchronization: importing users and security groups in SharePoint 2010
Other Properties that I checked, before realizing this was an issue with the Profile Import...
stsadm -o getproperty -pn siteuseraccountdirectorypath -url https://URL
stsadm -o getproperty -propertyname peoplepicker-activedirectorysearchtimeout -url https://URL
stsadm -o getproperty -propertyname peoplepicker-distributionlistsearchdomains -url https://URL
stsadm -o getproperty -propertyname peoplepicker-nowindowsaccountsfornonwindowsauthenticationmode -url https://URL
stsadm -o getproperty -propertyname peoplepicker-onlysearchwithinsitecollection -url https://URL
stsadm -o getproperty -propertyname peoplepicker-searchadcustomfilter -url https://URL
stsadm -o getproperty -propertyname peoplepicker-searchadcustomquery -url https://URL
stsadm -o getproperty -propertyname peoplepicker-searchadforests -url https://URL
stsadm -o getproperty -propertyname peoplepicker-serviceaccountdirectorypaths -url https://URL
Hope we find a better answer, as it IS very misleading. User Profile Import specifies Users, or Users and Groups. Nothing is said about Containers or Distribution Groups, worse yet there lacks any clear disclosure about how "Groups" will not
actually import if they are a Global Security Group and the users contained within them exclusively will NOT be included in your profiles,
nor in any compiled Audiences. Which was another BIG bummer!
I'm hoping to see future improvements on the Group imports.

Tollerence group for multiple user

hii all
can any one tell me how shall i assign multiple tollerence group to multiple user? and also tell me, while creating tollerence group am i have to give the tollerence group with co code? or just only co code?? please solve
regards rajesh Kr Mahato

Hi,
'assign multiple tollerence group to multiple user'-it's not possible,in table V_T043 the key is USNAM
'while creating tollerence group am i have to give the tollerence group with co code? or just only co code??'-I don't understand. In table V_T043T you need to put CC and Tol.group

How to use FNDLOAD to add program to request group?

Is there a way to use FNDLOAD to add a program to System administrators > security > responsilibity > request.
I have try to use the following command to downlod this information to load it to other place but no record saved in ldt file:
FNDLOAD apps/apps1234 O Y DOWNLOAD $FND_TOP/patch/115/import/afcpreqg.lct PO_RESQUEST_GROUP_2.ldt REQUEST_GROUP REQUEST_GROUP_NAME="All Reports" APPLICATION_SHORT_NAME="XXPO"
OR
FNDLOAD apps/apps1234 O Y DOWNLOAD $FND_TOP/patch/115/import/afcpreqg.lct PO_RESQUEST_GROUP_3.ldt REQUEST_GROUP APPLICATION_SHORT_NAME="Purchasing" REQUEST_GROUP_NAME="All Reports" UNIT_NAME="XXPO_PUR_REQ"
if i delete APPLICATION_SHORT_NAME="Purchasing" , it downloaded many seemingly not relevant data as follow:
Downloading REQUEST_GROUP to the data file PO_RESQUEST_GROUP_3.ldt
Downloaded REQUEST_GROUP All Reports CUN
Downloaded REQUEST_GROUP All Reports IGS
Downloaded REQUEST_GROUP All Reports PSB
Downloaded REQUEST_GROUP All Reports CSE
Downloaded REQUEST_GROUP All Reports AHL
Downloaded REQUEST_GROUP All Reports ENI
Downloaded REQUEST_GROUP All Reports OFA
Downloaded REQUEST_GROUP All Reports XTR
Downloaded REQUEST_GROUP All Reports SQLAP
Downloaded REQUEST_GROUP All Reports PO
Downloaded REQUEST_GROUP All Reports CHV
Downloaded REQUEST_GROUP All Reports QA
Downloaded REQUEST_GROUP All Reports CE
Downloaded REQUEST_GROUP All Reports POA
Downloaded REQUEST_GROUP All Reports MFG
Downloaded REQUEST_GROUP All Reports CRP
Downloaded REQUEST_GROUP All Reports WIP
How can I confine "Application"? which is under the field "Group" and how can I download all application named "custom puchasing" next to "Name"?

When migrating to another instance and want to add a concurrent program to a request group, I do it in two steps. Within a shell script, I call
1 - FNDLOAD to load ldt file (concurrent program definition)
2 - SQLPLUS to run an sql file that call FND API that install concurrent program into proper request group.
ex # 1 :
FNDLOAD $apps_user/$apps_pswd@$dbsid 0 Y UPLOAD $XDO_TOP/patch/115/import/xdotmpl.lct $XX_TOP/XX_PGM.ldt - WARNING=YES CUSTOM_MODE=FORCE >> $LOG_FILE 2>&1
ex # 2 :
sqlplus -s $apps_user/$apps_pswd@$dbsid @$XX_TOP/XX_PGM_REQ_GROUP.sql >> $LOG_FILE 2>&1
XX_PGM_REQ_GROUP.sql content.
IF NOT fnd_program.program_in_group('XX_PGM','Business Online','GL Concurrent Program Group','General Ledger' ) THEN
fnd_program.add_to_group(program_short_name => 'XX_PGM',
program_application => 'Business Online',
request_group => 'GL Concurrent Program Group',
group_application => 'General Ledger');
COMMIT;
END IF;
Hope this might help.

Request Group to a user

Similar Messages

Maybe you are looking for