Request GX630 bios unlock overclock menu with fn and ctrl key swap.

anyone out there know how to unlock the bios for GX630 so you can manual config the overclock ?
thanks

There is nothing to unlock in the BIOS that will allow you to manually adjust the FSB Frequency or anything like that.

Similar Messages

  • Request: GX640 Fn and Ctrl Key Swap

    Hi,
    I'd like to request a Fn/Ctrl key swap for the GX640.
    Bios Information:
    BIOS Version: E1656IMS.106
    BIOS Build: 02/12/2010 11:06:43
    EC Version:1656EMS1 Ver4.06
    EC Build: 12/15/2009
    Thanks

    Quote from: Pherein on 24-March-11, 12:56:03
    Hmm trying to flash the bios now but it's being stuck on the screen in the images linked to this post for about 15 minutes :S Have I bricked it? What should I do?
    http://img858.imageshack.us/i/dscf4542.jpg/
    http://img29.imageshack.us/i/dscf4543k.jpg/
    Quote from: Pherein on 24-March-11, 19:46:50
    I performed a hard-reset and the computer still worked fine, it seems the flashing process never started. I noticed I had the USB stick plugged into the USB/eSata combo port...wonder if that made a difference. I'll try flashing again using a regular usb port.
    Edit: This flash worked perfectly ) Don't know what happened the first time...
    Thanks,
    Pherein
    well done  
    the lockup behaviour exactly as described can hapends in very rare cases in ratio 1/100,
    its hapends to me think around 4-6 times [from 500 ec updates one after another in a loop],
    and in some very rare cases the EnE flasher hangs at startup and FAN spinup @100% and do nothing,
    i suspect ec unable to enter in reset mode or its some kind of the EnE flasher bugs,[too small delay to wait the EC for reply]
    but its not dangerous, etc: do not contain deadly properties.

  • Request: BIOS for GX740 to swap Fn and Ctrl key.

    hi,
    I was redirected from this topic https://forum-en.msi.com/index.php?topic=139362.0
    Apparently there is no BIOS function in GX740 for the owner to swap Fn and Ctrl key.
    Really appreciate it if it's available.
    Thanks.

    Quote from: 5rg on 08-August-10, 19:48:32
    I didn't receive email. I used alternative method form PM. Thanks.
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    Quote
    I didn't receive email.
    It was sent to ******* @gmail.com address. Check it in "spam" folder, maybe is there as there is no errors reported.
    Quote
    I used alternative method form PM. Thanks.
    Oki, that's the same.
    Quote
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    You're welcome

  • Why not to be unlocked iPhone working with GSM and CDMA/LTE in one device?

    why not to be unlocked iPhone working with GSM and CDMA/LTE in one device?

    I'll explain, does Verizon unlocked iPhone 5s work with CDMA networks (with SIM or without SIM), and if I travlled to another country that provide GSM operators, does the phone will work with GSM SIM normally?

  • CSS Rollover Menu with Images and Current Page Indicator

    Hello.
    I have found a very interesting video here: http://www.youtube.com/watch?v=vv8cRYGCvIY about creating a CSS Rollover Menu with Images and Current Page Indicator (I tested it and it is working fine).
    I have a web site with 15 pages based on a template and I want to use that video sample to do the same thing on my web site.
    Please tell me if I can use the sample from the link above to do that.
    What should I change in the css file (what new class should I make) to make this work on a web site based on a template  ?
    Thank You !

    I don't know about that video tutorial but a sitewide persistent menu indicator ('you are here' highlighting) is very simple to do with CSS classes.
    Details and code examples below:
    http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • FN CTRL Keys Swap in X220 BIOS?

    Can someone with an X220 please verify that you can swap the FN and CTRL keys in the BIOS.
    Thanks.

    It should be there on all BIOS versions for the X220. I don't see why they would remove the feature.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • I am having troubles with 3 things: scrolling with my laptop mouse, controlling my laptops volume with F9 and F10 keys, and I can not copy and paste images.

    I am having troubles with 3 things: scrolling with my laptop mouse, controlling my laptops volume with F9 and F10 keys, and I can not copy and paste images.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    volume controls issues are windows, not firefox.
    How your copy and paste your image? from where to where

  • GT60 Request for BIOS UNLOCK

    Hi,
    Looking to get my BIOS unlocked. Unable to do anything I want or don't want for the matter.
    Let me know what's needed.
    BIOS Type AMI EFI
    BIOS Version E16F3lMS.305
    Thanks

    well typically voltages are N/A even with unlock BIOS,
    about OCing is also questionable, but think BCLK should be possible and ram adjustment, timings , freq.
    and many more options..
    however you should be becarefull what settings you gonna modify, as setting a wrong option may cause NB to fails to boot.
    if you want me to unlock your BIOS, i can start work on it once donation is received:
    https://forum-en.msi.com/index.php?topic=134259.0
    and to send it back to you when its done 3-4 hours later

  • How do I edit the CSS of a Dynamic Menu with Dreamweaver and Business Catalyst.

    I've watched tutorials on v2 menu module and it obviously was not made for someone just starting out in Business Catalyst. I want to edit the CSS of my Dynamic Module, preferably V1, but if I have to use version 2 I will. The problem I am running into is that the width of the menu I am trying to make is not big enough. The menu is extremely simple, I could whip it up with css and html in a matter of minutes. Just black words horizontal layout with a dark red hover color and selected state. I can change all that in Business Catalyst Site Manager just fine, however, the width of my menu when I look at it on the site, is way too small. Probably only 750px wide. I want it 1000px wide, but I haven't the faintest idea of where to find that information to change. When I add the menu module to my html code i get this: {module_menu,1534789}. How do I add or find css/html to edit the properties? I know I can add classes to the items inside the menu in the Site Manager, but where do I find the html code that shows those names?
    I'm obviously missing something important and probably really easy, so I hope someone can help.
    Thanks, Evan Schmidt

    I went ahead and built the navigation without a module, easier than wasting all this time trying to figure it out.
    But initially my main problem was when I add the Menu module to my html in dreamweaver, this:  {module_menu,1534789} would be put in my html instead of css/html code. Now if publish my site and look at the page source, it shows the css/html, but it doesn't in dreamweaver. So is that the only way to edit the css/html code, copy the page source and replace the {module_menu,1534789} with the copied code in dreamweaver?

  • Mouse Right-Click menu with JTextField and swing

    Hello,
    I created a small app for providing an organized gui to insert data and log it to a text file. I just recently converted it to swing to improve the functionality of it and try to get away from some of the bugs I found in using regular java.awt.
    So far so good, all of my complaints with regular awt are gone using swing, but I have one problem I see as a real pain.
    With a TextField in java.awt you can right click and get the standard mouse-menu. The mouse menu is nice for cut/copy/paste type operations and I do not want to lose this functionality.
    But with swing and JTextField I am not getting the menu. I right click in there and get nothing. My UIManager is loading the OS one (windows) and I cannot find a way to recover this feature.
    Does anyone know how I can get this working?
    Thanks,
    Lucas

    Well as I posted here to try and see if there was a way to recover what the OS already provides I have struggled through creating a popup menu.
    I have the cut, copy, paste and selectall complete but I am struggling with the undo option.

  • Finger print not unlocking but works with iTunes and Apple Store

    So I have been battling this same issue since last week. I cannot unlock my phone with the FP scan but it will work when using the iTunes store or Apple Store app. Is there a setting I am missing?

    Hello bdallas99,
    Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID.  I recommend following the steps below for an issue like this (steps 2 and 3 specifically stand out to me for the situation you described):
    Troubleshooting Touch ID
    Ensure that your fingers and the Home button are clean and dry.*
    Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
    Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
    Passcode Unlock or iTunes & App Store is enabled.
    One or more fingerprints have been enrolled.
    If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
    If that finger still isn't working, try enrolling a different finger.
    If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
    Find the full article here:
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Request help to display a list with parent and child list item.

    I created a static list with items A,B,C and a child item A1 under parent A. I chose the template "vertical Side bar list". I am using theme 10 (sand) for my application. I created page 0 and am displaying the list on page template region position2. I am able to see the side bar with options A,B,C. But am not able to see the child option A1 when I click on Option A. I tried using 'DHTML MENU WITH SUB LIST' but When I click on option A, the child entry A1 is showing over the B and C options. I know this might be a pretty basic functionality. I am new to APEX and am just learning. I appreciate any help you give me.

    Mr.Backstrom,
    I have changed the list template overide to dhtml Tree. And now the list is being displayed as vertical unordered list with bullets. Is it possible to take off the bullets? Thank you for your time.
    Suma.

  • Creating menu with video and after few seconds fade-in of menutext

    I'd like to make a dvd , showing part of some footage after inserting the dvd automatilcally, and after a couple of seconds i'd like to fade in the menu text, with a choice of diferent titles, which you can choose from... i wasn't able to find how to do this in the manual... please help..
    thanx a million

    Hi - welcome to the discussions.
    You can do this in several ways. You could, for example, set the opening animation into a track and set the end jump action for the track to go on to a menu with the buttons. However, there would appear to be a pause and the buttons wouldn't 'fade' in.
    What I would do is create the footage for the animated intro in FCP or Motion and add on to the end of it a still portion of about 30 seconds or more which has the text in place. Make the text fade in as you want it.
    I would then take a still of that last part of the footage into Photoshop and use it as a background. Add a layer and on that add on the shapes you want to appear if a button is selected. Hide the background and you should be left with a mostly white image with shapes on it - convert it to grayscale and export that image (without the background) as a .pict file.
    Bring both the footage and the .pict file into DVDSP and add the background to a menu. Then add the .pict as an overlay. You can now use the loop point to set where the buttons become active - adjust the middle control to a point just after where the text becomes static.
    You then treat it as any other menu - draw out the button rectangles, assign targets and navigation between buttons.
    The effect is that your animated introduction plays and the text fades in (as part of the background footage). The buttons become active as soon as the loop point marker is reached, and stay active until the end of the menu. When it loops back there will be a slight flicker, but the buttons will then remain active again.

  • Nforce420: How can I upgrade BIOS on a computer with NTFS and no flopp

    I have a multimedia PC in my living room hooked up to my TV and I am planning to use it as a PVR, MP3 jukebox, DVD player and photo album.
    I build this machine in a small aluminium case, with the minimum components. I chose the nForce as the platform for this machine to minimise the number of components (and noise/heat).
    I'm running Windows XP with NTFS and there is no floppy drive in this system. Do you guys have an idea about how I can upgrade the bios from 2.0 to 2.4 (or 2.6?)?
    Thanks in advance

    Well, if you have any kind of internet connection on the computer, then MSI LiveUpdate is the way to go.  I had the same problem after I didn't quite plug in my floppy right the other day -- the burning smell was exhilirating but my computer was fine.  I have only NTFS partitions too and no floppy, but with an Internet connection it was easy to update the bios.
    For some reason LiveUpdate wanted to tell me that the latest BIOS is 2.4, so if you navigate to C:\Program Files\Setup Files\MS6373v240 and replace the BIOS image files there with the 2.6 ones you downloaded, and run Winflash.exe, it will flash you to 2.6.
    Alternately you could just download all that stuff on another computer and burn a CD with it.  You could make that CD bootable or you could boot off a Win98 startup CD or something and put your CD in after the computer boots up...not really sure how well that would work.
    Winflash has worked fine for me the three times I've used it (from 2.4 to 2.5, then back to 2.4, and now to 2.6).

  • Cannot post request for U100 bios switch FN and CTRL keys

    I need the U100 BIOS that switches FN and left CTRL keys.  Followed a somewhat convoluted method of locating the BIOS page for U100 and the DL links are removed - they ask that you post the request but the topic is closed.
    I've got 5 tabs open to MSI forums - I was just looking to swap those keys.
    How can I get the latest modded BIOS?

    Hello,
    The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
    Once done, the request will be e-mailed to you [up to 24 hours max]
    Best Wishes,
    Svet

Maybe you are looking for