Request: GX640 Fn and Ctrl swap

Hi Svet,
I'd like to request a Fn/Ctrl key swap for a GX640. You still handle older models like these, right?
If so, is xx USD enough of a donation?
Also I was wondering if it's important to mention that I have a Scandinavian keyboard layout - with ÆØÅ and such?
Yours sincerely,
Rasmus Hansen - Denmark

Hi Rasmus ,
Quote
I'd like to request a Fn/Ctrl key swap for a GX640. You still handle older models like these, right?
Yep, but tell your current BIOS & EC versions [look in bios setup, system info]
Quote
If so, is xx USD enough of a donation? 
Yep
Quote
Also I was wondering if it's important to mention that I have a Scandinavian keyboard layout - with ÆØÅ and such?
Nope, that's ok.
BR,
Svet

Similar Messages

  • Request: GX640 Fn and Ctrl Key Swap

    Hi,
    I'd like to request a Fn/Ctrl key swap for the GX640.
    Bios Information:
    BIOS Version: E1656IMS.106
    BIOS Build: 02/12/2010 11:06:43
    EC Version:1656EMS1 Ver4.06
    EC Build: 12/15/2009
    Thanks

    Quote from: Pherein on 24-March-11, 12:56:03
    Hmm trying to flash the bios now but it's being stuck on the screen in the images linked to this post for about 15 minutes :S Have I bricked it? What should I do?
    http://img858.imageshack.us/i/dscf4542.jpg/
    http://img29.imageshack.us/i/dscf4543k.jpg/
    Quote from: Pherein on 24-March-11, 19:46:50
    I performed a hard-reset and the computer still worked fine, it seems the flashing process never started. I noticed I had the USB stick plugged into the USB/eSata combo port...wonder if that made a difference. I'll try flashing again using a regular usb port.
    Edit: This flash worked perfectly ) Don't know what happened the first time...
    Thanks,
    Pherein
    well done  
    the lockup behaviour exactly as described can hapends in very rare cases in ratio 1/100,
    its hapends to me think around 4-6 times [from 500 ec updates one after another in a loop],
    and in some very rare cases the EnE flasher hangs at startup and FAN spinup @100% and do nothing,
    i suspect ec unable to enter in reset mode or its some kind of the EnE flasher bugs,[too small delay to wait the EC for reply]
    but its not dangerous, etc: do not contain deadly properties.

  • Request: GX740 FN and Ctrl Swap

    BIOS BUILD: E1727IMS.106, 02/01/2010
    EC BUILD: 1727EMS1.404, 12/15/2009
    Link donation :D

    Quote from: dan2009 on 18-May-11, 23:23:50
    Tried that but when I launch the program I get the following error:
    "The program or feature "\??\C:\Users\Dan\AppData\Local\Temp\sw.com" cannot start or run due to incompatibility with 64-bit versions of Windows.Please contact the software vendor to ask if a 64-bit Windows compatible version is available.
    I'm using Windows 7 64bit Ultimate
    there is some wrong environment defined because of this this error popup
    Follow this instead:
    Make a bootable USB key, follow this guide: http://www.bay-wolf.com/usbmemstick.htm
    Once done extract all files from desired BIOS archive[which is planned to flash] to the USB key.
    E.g. extract all files from 1727_10e.zip archive to the USB key as well.
    Then reboot notebook and boot from the USB key,
    and hold "SHIFT" Key while booting.
    When you see A:\ or C:\ type:
    flash [ENTER]
    Then wait process to finish.

  • G serie fn and ctrl swap

    Hello,
    I just got a g560 with an intel i5-450m cpu, 320 gb hard drive, and 4gb ram.
    I got this laptop for 599 off newegg and i'm loving it. However, what really irks
    me is the placement of the fn and ctrl keys. Because I am a desktop user, I
    am used to the ctrl key in the corner. I checked online in places and heard that
    lenovo had a fn and ctrl swapping feature thingy in the bios but when I pressed
    f2 as it was starting up, I don't see the function or the keyboard section. Is it
    possible to swap the fn and ctrl keys for this laptop?
    Please let me know soon
    and thanx in advance.
    edit : subject edited for common issue.

    hey,
    thanx for the info.
    however, as i checked the drivers and updates from
    the lenovo driver download place, I saw that there was
    a bios update.
    http://consumersupport.lenovo.com/ot/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=67873&OS=Wi...
    my bios version is lenovo 29cn24ww v(1.07)
    and my smbios version is 2.6
    Please take a look and see if this is actually an upgrade
    or if it is actually a downgrade. I just want to make sure
    cuz I heard a lot of people saying that after they do a bios
    update, their comp freezes up and won't boot up.       O.O
    Thanx in advance.  xD

  • MSI GX710X FN and CTRL swap request

    Can I please have one of those files that makes the ctrl and fn buttons (down-left) swap functionality. A171AAMS205 is the version of BIOS i have (or so is called the folder i downloaded and updated the BIOS). Notebook is MSI GX710X and Model is MS-171A ( this written on the back of my notebook.
     

    Quote from: phoenixvg on 12-March-10, 18:32:03
    Sorry, didn't see that. Its done now, dont know the ammount but i dont have much so i hope this should do it.
    There is some Confirmation Code (sorry i am new to both flashing and PayPal). Do you need that code ?
    Nope no need those codes. Thanks for your donation.
    Working over it now and will send you the request when its done[by e-mail]
    Best Wishes,
    Svet
    EDIT: Check your e-mail
    EDIT N2:
    Quote from: phoenixvg
    I flashed the bios and everything is fine. Thanks for the quick response.

  • Request: Fn and CTRL swap

    Could you please e-mail me the appropriate file to switch the CTRL & FN keys on my MSI A6000-225US?

    Oki, request can be proceed on donation: https://forum-en.msi.com/index.php?topic=134259.0
    once done request will be emailed to you when its done

  • Request: BIOS for GX740 to swap Fn and Ctrl key.

    hi,
    I was redirected from this topic https://forum-en.msi.com/index.php?topic=139362.0
    Apparently there is no BIOS function in GX740 for the owner to swap Fn and Ctrl key.
    Really appreciate it if it's available.
    Thanks.

    Quote from: 5rg on 08-August-10, 19:48:32
    I didn't receive email. I used alternative method form PM. Thanks.
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    Quote
    I didn't receive email.
    It was sent to ******* @gmail.com address. Check it in "spam" folder, maybe is there as there is no errors reported.
    Quote
    I used alternative method form PM. Thanks.
    Oki, that's the same.
    Quote
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    You're welcome

  • How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    The BIOS feature that you request already exists.
    1.  reboot the computer
    2.  press F1 to enter BIOS setup
    3.  config -> keyboard/mouse -> Fn and Ctrl Key swap

  • Fn and Ctrl key swap for GX740?

    hi, I searched through some topics, I found out that there is a EC mod to swap Fn and Ctrl key for GX620, but does it work for GX740?

    No, it will not work and probably will kill your notebook if you attempt this.
    You can open an request for your notebook in correct forum section:
    https://forum-en.msi.com/index.php?board=51.0

  • Newbie: swap fn and ctrl keys on T60

    I bought a used T60.  I am used to using HP Pavilions where the Fn and Ctrl keys are in the opposite positions as on the T60, and I am having trouble retriaining my fingers.
    So i looked for info about how to swap them.  I understand KeyTweak doesn't work on the Fn key, and then I ran across a message about getting to the BIOS.
    I have never messed with BIOS stuff before, but I did interrupt booting, get to it, but do not see swapping the Fn and Ctrl keys listed among the keyboard options.  So I am guessing this feature is maybe in a newer verison of the BIOS.
    I don't want to trash my laptop, but I'd like to swap the functioning of these keys - is there an idiotproof way?
    Also, I used the onetouch Pavilion keys a lot to invoke Firefox or thunderbird.  Is there a way to make a key on the T60 keyboard do that?  There are several keys I never use for anything, like PgUp, etc.
    Thanks.

    Not exactly true. You can't swap the keys with ORIGINAL BIOS - there are modded versions available that will let you do it.
    Read (and download) from here: http://forum.notebookreview.com/lenovo-ibm/474396-​fn-ctrl-swap-all-lenovo-laptops-solved.html
    Note! This is unofficial BIOS images - you might brick your computer, and neither I, nor Lenovo take any responsibility
    IT-technician, running my own company in Bergen, Norway
    Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

  • Swap fn and ctrl keys

    Is there any tool that would let me swap functionalities of fn and ctrl keys on my MacBook Pro?

    try [Ukelele|http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele].

  • Swap cmd and ctrl keys?

    hello im a mac user but i have to open windows on bootcamp to do some work sadly.
    im finding it realy annoying having to swap between "command" and "ctrl" all the time. is there a way to swap them?

    You don't say which Windows you are using but there are many free applets for Windows that allow restructuring the keyboard. Just google for them.
    I take it you don't use the terminal mode in Leopard much, because that's the same as Windows.
    It always takes me a few minutes for my brain to "fix" my fingers for the OS in use - then it's OK.
    But I am sure you will find something on the net that will do what you want.

  • Swap fn and ctrl - GX623

    How to swap fn and ctrl buttons on gx623?

    Look here: https://forum-en.msi.com/index.php?topic=123316.0

  • Swap fn and ctrl on B560 model

    Hello
    I buy b560 notebook - its good model but keyboard is dont usefull for my tasks (i am programmer).
    Please help me swap ctrl and fn buttons... write me for my email about this...

    There is a way apparently there : http://forum.notebookreview.com/lenovo-ibm/474396-​fn-ctrl-swap-all-lenovo-laptops-solved.html
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Swapping Fn and ctrl

    I read that it was possible (from another thread) to swap the fn and ctrl in system preferences. I would love to be able to try that out and see how well it works. I looked at the Keyboard and Mouse section under system prefernces but couldn't find any settings that let me do this.
    Can someone help me out?

    Input Remapper will allow you to make kay assignment changes
    http://www.olofsson.info/index.html?inputremapper.html
    There is a good forum to look through for information on this great little utility. In particular, read the sticky on uninstalling the keyboard drivers.
    http://forum.insanelymac.com/index.php?showforum=78

Maybe you are looking for

  • Episode shows up in Podcast app but is "not downloadable"

    I am aware that iTunes is having some problems but I can't tell if this is associated with those since I had this same problem once back in November and it was never resolved. I podcast on Tumblr, but I use feedburner to create enclosures on rich med

  • Setting variables in cfscript

    I am parsing xml and I am trying to set each xml tag with the same name to a different variable. This is what I have. COVYEAR = XmlSearch(myxmldoc, "//COVERED/YR_INFO/YEAR"); for (i = 1; i LTE ArrayLen(COVYEAR); i = i + 1) vCOVYEAR = COVYEAR .XmlAttr

  • Wish I could get started with my new iPad

    Ordered it on December 15th and am hearing it is still sitting in China! Nice 2 day shipping! My confidence is shot when it comes to Apple!

  • Due date for fi open items

    i need to calculate due date for open items as we can see in fbl5n. can ny1 suggest how to calculate dat? points 'll b rewarded

  • Posting Data Issue with IDOC Type : COND_A03

    Friends, I'm posting the data from Middleware(Message Broker) to SAP using the IDOC Type : COND_A03 with Message Type : COND_A. For this IDOC,I'm populating the below Segment's data. Segement :E1KOMG: Fields: KVEWE,KOTABNR,KAPPL ,KSCHL,VAKEY ,KONDA,M