Request help for iphone screen flickering

I'm using iphone 4. Few days ago (before the software update 6.0.1) i noticed my iphone screen is flickering and blurred.this bug was not fixed after IOS update 6.0.1. Thus showing horizontal lines in the screen.
please help me

I did resolve it. I did the reset while the phone was plugged into my computer at home (holding down the home button and power button at the same time, until it shuts down and reboots). It took a few tries but eventually it showed the icon of the plug going into the icon for iTunes. From iTunes, I did a restore from an older backup, and then reinstalled the update from the computer. Now it works just fine. I wonder if maybe the update was just too hefty to pull down via the cellular network.
If you never did a backup of your phone to iTunes or the cloud, then you'll likely have to do a restore to factory conditions and then do the update. Incovenient, but better than a paperweight

Similar Messages

TS3681 I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle

I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle

Same here. I tried to update my iPhone 5S and iPad 4 to 7.1 but iTunes wiped out them. This thing already happened for iOS 7.0.6 update. What happened to Apple? I am really curious whether Apple is aware of this problem.

How to create an search help for standard Screen

Hi,
Can any one help me out ... How to create a search help for standard screen field.......
thanks & regards,
Naveen...

Hi Naveen.
I would like to suggest a couple of references,
[SDN - Standard Reference for create a search help for own fields in selection screen |How to create a search help for my own fields in selection screen;
[SDN - Standard Reference for Attaching search help to standard screen|Attach search help to standard screen;
[SDN - Reference for want to add a field in standard search help screen|want to add a field in standard search help screen;
[SDN - Reference for Attaching a search help to a standard screen - Case 2 |attaching a search help to a standard screen;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Request help for purchasing HD webcams using iMac, OSX &Lion

I am requesting help for purchasing a HD webcam using iMac, OSX &Lion. Any suggestions would help. The following is what I've done so far...
I purchased Logitech's HD C910 webcam. It was a mess in requards to freezing up, no zoom and most of all no adjustments in: contrast, hue, color, etc. You're stuck just like a car with no engine or wheels who wants that. The other Logitech products i.e. Pro 9000 is being discontinued with no software updates in the future and the same with the other products. Most of the other manufactures do not provide software that is really compatible provideing true HD with full features. I'm willing to spend around $199,00 or so. Any suggestions?

Well I found my own answer to the webcam concern that I had ....I bought the Logitech C-910...Yes, I know the Logitech states their software is not compatible with OS X ...That's OK, I only use the basics supplied by Logitech to open the cam...Logitech does supply HD settings which are useful. I like the wide angle which is there to play around. Then I use a software program called "Webcams Settings" found at Apple's App Store. There is a small charge for this download but more than worth it to have a fully functioning system. The best way to get there is obliviously via your "Dock." Click on the icon and type in "Webcam Settings" in the top right portion of the page and presto....you have all the goodies to play like a professional. i.e.: zoom, pan, tilt, aperture. etc. of course your webcam camera(s) must have the capability to perform these options in order to use them.
Note I have used my webcam for everything you can imagine and have a 60 foot cord (several cords linked together) to go outside (LOL) 'Just love the goodies with "Webcam Settings". I take outstanding pics too if I do say so, please. Funny, I rarely use my cam to Skype but knowing the option is there for me anytime I wish. I my cam to photograph orchids and misc. even portraits and family play photos with my tripod in hand. Just because there is a big road block in your path doesn't mean there aren't other avenues. In the corporate life it's called take a negative and make it a positive or else.......and if you have to gripe then you better have an idea on how to turn it around. -So- I did Logitech and Apple.

Search help for selection screen field

Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vind

hi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
   select single butxt into butxt
         from t001
        where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
       exporting
            tabname           = 'T001'
            fieldname         = 'BUKRS'
            dynpprog          = sy-cprog
            dynpnr            = sy-dynnr
            dynprofield       = 'P_BUKRS'
       tables
            return_tab        = return
       exceptions
            field_not_found   = 1
            no_help_for_field = 2
            inconsistent_help = 3
            no_values_found   = 4
            others            = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
         from t001
        where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
       exporting
            dyname     = sy-cprog
            dynumb     = sy-dynnr
       tables
            dynpfields = dynfields
       exceptions
            others     = 8.
start-of-selection.
rgsds
anver
if hlped mark points

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

F4 help for Standard Screen

Hi folks,
          I have to keep F4 help for field 'Goods Receipt' in the stnadard TCode MIGO. Do we need to use any Exit or is there any other way to do so like configuration settings in SPRO...Pls suggest me how can i acheive that one..
            Thanks,
            Shyam.

Hi Shyam,
you have to do from the EXIT only
Enhancement/ Business Add-in            Description
Enhancement
MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011                                Read from RESB and RKPF for print list in MB26
MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009                                Filling the storage location field
MBCF0007                                Customer function exit: Updating a reservation
MBCF0006                                Customer function for WBS element
MBCF0005                                Material document item for goods receipt/issue slip
MBCF0002                                Customer function exit: Segment text in material doc. item
Business Add-in
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_DOC_BADI_INTERNAL                    BAdIs During Creation of a Material Document (SAP Internal)
MB_ME_CSGMT_BADI_SAP                    BAdI: Consignment Processing - Stock Transfer
MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
MB_RESERVATION_SCR                      Screen BAdI for Retrofit DFPS
MB_RESERVATION_UPCHD                    BAdI for Creation and Changing of Manual Reservations
MB_RES_BAPI_CHANGE                      BAdI: Execution of Changes to Reservation Fields
MB_RES_BAPI_CREATE1                     BAdI: Adoption of Customer's Own Fields as Reserv. Fields
MB_RES_BAPI_DETAIL1                     BAdI: Display of Customer's Own Fields in Reservations
MB_STOR_LOC_BADI_GTS                    BADI to Check and Change Storage Location (GTS Fct. Only)
MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
MB_DOCUMENT_BADI_SAP                    BADI for Creation and Changing of a Material Document
ARC_MM_EBAN_CHECK                       BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_PRECHECK                    BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EBAN)
ARC_MM_EINA_CHECK                       BAdI: Enhancement of Archivability Check (MM_EINA)
ARC_MM_EINA_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EINA)
ARC_MM_INVBEL_CHECK                     BAdI: Enhancement of Archivability Check (MM_INVBEL)
ARC_MM_INVBEL_WRITE                     BAdI: Enhancement of Scope of Archiving (MM_INVBEL)
ARC_MM_MATBEL_CHECK                     Prüfung ADD-ON-spezifischer Kriterien für MM_MATBEL
ARC_MM_MATBEL_WRITE                     Check Add-On-Specific Data for MM_MATBEL
MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_LMBMBU04                         posting of gr
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI                        BAdIs During Creation of a Material Document
No.of Exits:          8
No.of BADis:         29
Hope these things use ful to you.
Thanks!

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below threads:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
Reward if helpful
Rgds,

Search Help for selection screen select-option

Hi Friends,
 I want have search help for KSCHL with only the condition types starting with Z. I need your help to do that.
Thanks in Advance.

hi,
chek a sample code, for restricting the serach help.
REPORT Z_CONECT_A.
Include type pool SSCR
TYPE-POOLS sscr.
TABLES : marc.
defining the selection-screen
select-options :
s_matnr for marc-matnr,
s_werks for marc-werks.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA : optlist TYPE sscr_opt_list,
 *** type sscr_***.
INITIALIZATION.
Restricting the MATNR selection to only EQ and 'BT'.
optlist-name = 'OBJECTKEY1'.
optlist-options-eq = 'X'.
optlist-options-bt = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_MATNR'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY1'.
APPEND *** TO restrict-***_tab.
Restricting the WERKS selection to CP, GE, LT, NE.
optlist-name = 'OBJECTKEY2'.
optlist-options-cp = 'X'.
optlist-options-ge = 'X'.
optlist-options-lt = 'X'.
optlist-options-ne = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_WERKS'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY2'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
 EXPORTING
 restriction = restrict
 EXCEPTIONS
 TOO_LATE = 1
 REPEATED = 2
 SELOPT_WITHOUT_OPTIONS = 3
 SELOPT_WITHOUT_SIGNS = 4
 INVALID_SIGN = 5
 EMPTY_OPTION_LIST = 6
 INVALID_KIND = 7
 REPEATED_KIND_A = 8
 OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards
anver
if helped pls mark points

Can I still get help for known screen problems on my 2006 iMAc 17 inch?

In 2010, I took in my little-used iMac 17 in Intel core duo for a screen replacement with a serial number W8602 etc with an Apple-approved dealer in London as I was working nearby.
The iMac had begun to show vertical lines, such as those many who had this model report, which apparently have to do with a chip problem. However, I didn't know that at the time, and neither diod the repairer - they replaced the screen, which within a few months started to go wrong again.
My partner got ill so I did nothing about it, as I'd moved away from London and couldn't easily access the reapirer, but now the machine is totally unusable.
I'm furious at Apple, and at their repairer, I had Apple Care at first with this machine but of course, as the machine had light use, the problem didn't show up for a long time.
They should have issued a recall of this machine, but I guess they were hoping it would go away as Mac people upgrade more frequently. But I think something you pay £1000 for should las the course.
Is there anything I can do now?
Thanks
Alex B

Hello Alex,
We're just other users here, & I don't consider it likey, but if AppleCare can't help, ask to speak to customer service, also, no idea on EU consumer laws that I hear are a bit better than over here.

Request help for WS 14000..44 std wrkflw

Hi,
I am facing a issue in wokflow WS14000044.It's not sending any work item to any of the purchasers.
The log says no agent found for this task. I also checked following FM to see whether any entries generated but dod not return any values.Request help.
BBP_PDH_WFL_GET_PURCHASER_LIST.
arjman

Hi,
Check in PPOMA_BBP that there are purchasers assigned to the relevant purchasing org of your cart.
Also check that the agent assignment of the approval task TS14007947 is maintained with desired approvers.
Kind regards,
Siobhan

Creating Help for Iphone/Android app

I need to create help for an iPhone and Android app using RoboHelp 10.
Which option do I choose for a New Project: Blank Project or Application Help?
And, which output do I choose under "File > Generate"? I see an option for "Native Mobile App." But, I'm not seeing a "Multiscreen HTML5" option.
Which file do I give the developer?
Thanks for your help!

That's a pretty big question and you haven't given us any clues such as which version of RoboHelp you are using and whether it is just this form of help that is new to you or help in general.
It doesn't really matter whether you choose Blank Project or Application Help as they are just starters with different default topics and you will be trashing them anyway. For now let's say start with Blank Project and create your topics. You do need to keep in mind they will be viewed on various devices. More about that later.
When that is done you start thinking about creating a suitable output. Multiscreen HTML5 is the output in RoboHelp 10. RoboHelp 11 was released today and that has a new output, Responsive HTML5. That is simpler, especially first time out. Both of those types are intended for use where they will be viewed via a browser, be that on a desktop or a mobile device.
It is not clear whether you want your company's app to access help in that way or whether the need is for the help to be an app in its own right. The latter adds another layer of learning. Essentially after creating an HTML5 output, you use the script to create an app. From the questions you ask, I suspect you will need developer assistance with that.
Start by viewing my page at http://www.grainge.org/pages/authoring/html5/html5.htm where you can download a project with information inside, include some ideas about how to write content.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

As3 - Map/Level help for iPhone + movement

I'm making an app for an iphone using CS5 and was wondering the best way to make a map or a level. I want it to be continuous until the player dies which will bring it to the end game frame. An example would be NinJump for iPhone. You keep going and going until you die.
Then my next question.. I feel stupid asking cause i feel like only i have this problem..whenever I do the hitTestPoint check my character goes through the floor in the middle. I tried changing the registration points but when I put it to the bottom for my character it just does swirls... not move so i kind of changed the code around to make it work but probably wont be best for slopes and stuff.
for (var i:int = 0; i<10; i++) {
if (floor.hitTestPoint(ball.x,ball.y+18,true)) {
ball.y-=gv;
vy=0;
jumped=false;
thanks

Hi, Surendra and Grant,
Thank both of you for help!
I am tring to learn Form Developer. The database and developer suites are installed in one PC. I don't think I am working in web environment.
Except the Mouse Movement Triggers, other mouse trigger work well, such as when_mouse_click, when_mouse_doubleclick.
Any help is very much appreciated.
John

Search help for Standard Screen

Hi folks,
I have to keep F4 help for field 'Goods Receipt' in the stnadard TCode MIGO. Do we need to use any Exit or is there any other way to do so like configuration settings in SPRO...Pls suggest me how can i acheive that one..
Thanks,
Shyam.

Hi,
Check the following exits. these all are for Migo tCode.
                                                                                MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
Search for appropriate exit wchich meets your requirement.
Regards
Rajesh Kumar

Request help for iphone screen flickering

Similar Messages

Maybe you are looking for