Request id not visible in Manage

Hi BW Experts,
Has anyone experienced having a Request id of data in an Infocube, which was not visible via the "Manage"? If so, how do ensure this doesn't happen?
The data was "deleted", but when doing Listcube the data is still showing. There was a database error of 913 during the deletion of the data, but there was not an error raised in the sm37 job log. It actually said it was successfully deleted.
Version 3.0b sp22
Any help will be appreciated.
Thank you!

Hi,
I am not sure as to how this inconsistent deletion happened.  In my experience this is not a scenario that happens regularly.  It has not happened to me at all - Deletion of requests are being handled in Process Chains.
Here is a link to a 'best practices' document for the BW administrator.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be
BR/
Mathew.
Edited by: Mathew Muthalaly on Jul 23, 2008 6:02 AM

Similar Messages

  • PDS Appraisal Completed - Document not visible to manager

    Dear ,
    We are going live with Objective settings and performance appraisal. The functionality working well except an issue. The completed appraisal of subordinate is not visible to manager where as the same is visible to employee.
    Any idea why manager nnot able to see completed document after employee agreed on the PDS?
    Thanks in advance

    Hi,
    Thanks for your reply.
    1. "Please check role tab under category and template which you have been defined"
             In the category and Manager we selected
                    Self
                    Manager
                    Higher manager
    2. under this how many level of employee you have selected in which way like appraiser, and appriasee, like manager, co worker .
          (Employee>Manager>Higer Manager-->HOD )
          Employee
          Immediate Manager (line Manager)
          Higher Manager ( Manager of Line Manager )
          HOD (Cost centre Owner)
    3..more over you check manager position coming under which position....
         I am not clear about the above , can you eloborate?

  • Request Type not Visible in CUP

    Hi,
    We are in the process of configuring CUP.
    We have uploaded file AE_init_append_data _CC.xml into the initial system data of CUP. But Request types MITICRLC etc are not visible in CUP.
    Workflows for RAR are visible in CUP-> CONFIGURATION->MISCELLANEOUS
    Any clues.
    Regards,

    Please check if you have activated the RAR workflows in CUP-> CONFIGURATION->MISCELLANEOUS along with proper exit URIs and User ID password details.
    Once these workflows are activated only then you will be able to see the corresponding details under request type, priorities etc for RAR workflows.

  • Paid A/P down payment request is not visible in payment window

    Hi,
    SAP B1 8.81 PL 06
    My customer has created a down payment request and had made the payment in full
    He has created A/P invoice without down payment by mistake
    Now if we go to outgoing payment the paid down payment request is not showing up
    What to do in this case as i cannot reconcile the D/P by using internal reconcilliation
    Thanks
    Md.nazeer Shaikh

    Hello,
    Again confirm from customer that he made outgoing payment or not otherwise entry can not loss.
    Even you should check party ledger balance it is showing or not if not then user is not sure that he made or not.
    Thanks
    Manvendra Singh Niranjan

  • Current period data not visible in Management Cockpit

    Hi...
    I am facing problem in displaying latest data in Management Cockpit. The cockpit design is as follows: 0CALDAY (Section Axis), Plant Code (Data Series) & Production figures (Measure: Without Specific Axis).
    Problem:
    By default, the cockpit does not display data for current period automatically. It works perfectly fine when the period is changed to past period. However, when the cockpit data is refreshed by - opening the cockpit frame, clicking on 'Parameters' and clicking on 'Select', the data for current period is displayed correctly. Why does the cockpit not display current month by default?
    We have tried to fill the cache multiple times and hence do not think that this problem is due to inavalibilty of data in 'Cockpit Cache'. (Parameters given in buffering program 'UMM_MC_BUF' - Start = 01.2009, End = 012.2009, Time Stamp = 'X', Mode = 'A').
    Note: The query is based on Inventory Cube (0IC_C03)
    Regards,
    Anoop Sahu

    thank for your answer
    As i see it in JDev help, i'm sure it is possible.
    Can someone help me with that problem ?

  • Request not visible in the version management of a Report Program

    Hi,
    We Imported an external request into the SAP System.
    The request was imported successfully and a program already existing is updated with that request,
    The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that  particular program
    We tried reimporting the request but the request is not visible.
    Regards

    Check the transport logs and see if there are any erros/warnings.

  • Approve Button not visible in Tasks for Leave request in Tasks- MSS

    Dear gurus,
    Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
    Any suggestions....
    regards,
    Rajasekar.

    hello Bala,
    there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
    Thanks alot Bala..
    In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
    Regards,
    Raj

  • (Harmful) edit not visible in WkiHistory in "Feature Requests"

    Maybe this should be a discussion.
    I've just removed a porn link from the Forums table in "Feature Requests for..."
    The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory.  I can construct a lot of scenarios here (but I won't!) and all of them are scary.  I cannot construct a scenario with a "harmless"
    rating.
    I'm only a newbie, it's not for me to take this further.  But I am sufficiently experienced to know that a revision of best practise access control should be undertaken.  Yesterday would be a good time to initiate it.
    Gordon.

    Hi Richard -
    Thanks for answering.  It's the comment to the edit that's missing.
    I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
    I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List.  I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at.  But I do believe Technet
    Wiki should record blank comments as well as filled comments.  Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
    Gordon.
    Okay, please add the feature request to the Wiki section:
    http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
    Hey, thanks for your edits here:
    http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
    You removed a dead link and a spam link!
    And the history tab showed me all that!
    We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Change request released & but not visible

    Hi kaushal & all,
    Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
    see the request in queue.Also log is not visible for the released request.

    Hi,
    Customizing change request is released from development system & data file & co-files are not generated
    For the above reason only two possibilities if STMS configuration is proper.
    - Request is local request
    - No target system is define in released request.
    in your development system run se01 -> in display tab enter request -> press enter.
    double click on request -> select properties tab -> make sure target system indicate your QAS system.
    regards,
    kaushal

  • Navigator Not Visible in Directory Manager

    On Win XP Pro Oracle Directory service does not start on boot, even though it is set to do so automatically. It will start manually from the Windows services app. After starting the service, oidctl runs successfully from the command line "C:\>oidctl connect=oid90 server=oidldapd instance=3 configset=0 start"
    On start up Oracle Directory Manager (ODM) accepts the orcladmin/welcome logon and displays the connecting message and loading schema message. ODM opens but does not display the Navigator panel. ODM seems to be connected to the database because Objects, attributes, entries etc. are visible by selecting choices from the Operations menu.
    When OID was first installed the navigator sometimes did and sometimes did not display. Now it is never displayed.
    Any suggestions appreciated.

    Hi Jay,
    I am a Business Analyst and would like to get Oracle Workflow running so I can play with Workflow Builder. I'm just trying to get my hands dirty with this stuff. I want to use OID as a directory server for workflow.
    I uninstalled 9.0.1.1 in installed 9.2.x.x. The results are similar.
    The Bind request to LDAP failed error re-appeared. I had somehow worked around this on the previous install but I don't know how. The command ldapbind -h trburns -p 389 -D cn=orcladmin -w ohwgwead returns Cant contact ldap server. The error seems to be common as it appears in numerous postings but I havent seen a clearly described explanation and solution.
    Do you have access to Oracles knowledge base? It must have a description of this problem.
    I can open ODM after the bind failure by clicking the close icon. Double clicking the banner works in cases where the navigator tree is not visible. Many thanks for that tip.
    Any authoritative information you could provide about the bind problem would be appreciated.
    Thanks again,
    Tom

  • Reporting Flag is not visible in the manage screen

    Hi BI Experts, Good morning.
    We load the inventory data daily in the night time which is delta load.
    5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
    From that day onwards its running successfully.
    Yesterday i deleted the bad request from infocube.
    But the Reporting flag is not visible.
    Today i didnot get the records.
    Please can anyone tell me the process.
    Thanks in advance.
    Regards
    Anjali

    Hi Nagesh,
    Still i am not getting reporting flag.
    I tried what did u say.
    And today i did not get the records. Infopackages didnot run. It shows in red.
    I tried to run it manually but it gives error.
    The error message is:
    Short text
        An exception occurred that was not caught.
    What happened?
        The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
         along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program 'SAPLRRMS' has to be
        terminated.
    Please give me the reply.
    Thanks in advance
    Regards
    Anjali

  • I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

    I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

  • 3702i AP's not Joining WLC - Layer 3 discovery request not received on management VLAN

    Hi Guys, 
    This is a follow up post to this thread: https://supportforums.cisco.com/discussion/12400481/3702i-not-joint-2504
    Have been playing around with my AP's and made sure the time is correct on all the devices ( WLC and Switch). I have also moved the AP's to the same Vlan as the management IP of the WLC. 
    if I move the AP's to the same Vlan as the WLC they join and are happy, as soon as I move them to a different Vlan they cant join and there time goes back to the default plus they do not seem to save the WLC details to flash but still remember the test names I give them.
    it appears that option 43 is working fine as I can see it look for the WLC IP and I have done some trouble shooting on the WLC and it looks like it see's the AP but doesn't except it.
    please see below for the boot up of the AP and the WLC logs: 
    AP 
    IIOS Bootloader - Starting system.
    *** deleted for breverity ***** 
    Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
    File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
    executing...
    Secondary Bootloader - Starting system.
    Montserrat Board
    *** deleted for breverity ***** 
    Boot CMD: 'boot  flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
    Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
    File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
    executing...
                  *** deleted for breverity ***** 
    cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
    Processor board ID FGL1838X4T1
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 8.0.110.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: F4:4E:05:B7:1E:84
    Part Number                          : 73-15243-01
    PCA Assembly Number                  : 000-00000-00
    PCA Revision Number                  :
    PCB Serial Number                    : FOC18343WPR
    Top Assembly Part Number             : 068-05054-03
    Top Assembly Serial Number           : FGL1838X4T1
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-CAP3702I-Z-K9
    % Please define a domain-name first.
    Press RETURN to get started!
    *Mar  1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
    *Mar  1 00:00:19.755: Registering HW DTLS
    *Mar  1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is  2500
    *Mar  1 00:00:19.815: APAVC:  WlanPAKs 42878 RadioPaks  42270
    *Mar  1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
    *Mar  1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
    *Mar  1 00:00:26.167:  record size of 3ss: 1168 read_ptr: 4F9698E
    *Mar  1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
    *Mar  1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
    *Mar  1 00:00:31.251:  record size of vht: 2904 read_ptr: 4F9698E
    *Mar  1 00:00:31.407: Wait until the stile protocol list is initialized.
    *Mar  1 00:00:32.651: Start STILE Activation
    *Mar  1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
    *Mar  1 00:00:35.447: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Fri 19-Dec-14 11:20 by prod_rel_team
    *Mar  1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
    *Mar  1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Mar  1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
    *Mar  1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
    *Mar  1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
    *Mar  1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
    *Mar  1 00:00:50.431: DPAA Initialization Complete
    *Mar  1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
    *Mar  1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
    *Mar  1 00:00:53.867: Currently running a Release Image
    *Mar  1 00:00:54.287: Incorrect certificate in SHA2 PB !
    *Mar  1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
    *Mar  1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Mar  1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
    *Mar  1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
    *Mar  1 00:01:02.707: APAVC: Registering with CFT
    *Mar  1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
    *Mar  1 00:01:02.707: APAVC: Reattaching  Original Buffer pool for system use
    *Mar  1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
    %Default route without gateway, if not a point-to-point interface, may impact performance
    *Mar  1 00:01:10.103: AP image integrity check PASSED
    *Mar  1 00:01:10.187: Incorrect certificate in SHA2 PB !
    *Mar  1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
    *Mar  1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Mar  1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
    *Mar  1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Mar  1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar  1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Mar  1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    Not in Bound state.
    *Mar  1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
    *Mar  1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
    Not in Bound state.
    *Mar  1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
    *Mar  1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
    WLC: 
    isco Controller) >show time
    Time............................................. Tue Jan 27 17:44:47 2015
    Timezone delta................................... 0:0
    Timezone location................................ (GMT +8:00) HongKong, Bejing, Chongquing
    NTP Servers
        NTP Polling Interval.........................     3600
         Index     NTP Key Index                  NTP Server                  NTP Msg Auth Status
           1              0                             150.101.176.226       AUTH DISABLED
    (Cisco Controller) >show ap join stats summary  
    Incorrect input! Use 'show ap join stats summary [all/<ap-mac>]'
    (Cisco Controller) >show ap join stats summary all 
    Number of APs.............................................. 2 
    Base Mac             AP EthernetMac       AP Name                 IP Address         Status
    f4:4e:05:aa:a6:a0    f4:4e:05:94:c3:98    APf44e.0594.c398        10.1.1.22          Joined    
    f4:4e:05:b6:ce:f0    N A                  Test_1                  10.1.20.7          Not Joined
    (Cisco Controller) >show ap join stats detailed f4:4e:05:b6:ce:f0
    Sync phase statistics
    - Time at sync request received............................ Not applicable
    - Time at sync completed................................... Not applicable
    Discovery phase statistics
    - Discovery requests received.............................. 45
    - Successful discovery responses sent...................... 21
    - Unsuccessful discovery request processing................ 24
    - Reason for last unsuccessful discovery attempt........... Layer 3 discovery request not received on management VLAN
    - Time at last successful discovery attempt................ Jan 27 17:45:49.705
    - Time at last unsuccessful discovery attempt.............. Jan 27 17:45:49.705
    Join phase statistics
    - Join requests received................................... 0
    - Successful join responses sent........................... 0
    - Unsuccessful join request processing..................... 0
    - Reason for last unsuccessful join attempt................ Not applicable
    - Time at last successful join attempt..................... Not applicable
    - Time at last unsuccessful join attempt................... Not applicable
    Configuration phase statistics
    --More-- or (q)uit
    - Configuration requests received.......................... 0
    - Successful configuration responses sent.................. 0
    - Unsuccessful configuration request processing............ 0
    - Reason for last unsuccessful configuration attempt....... Not applicable
    - Time at last successful configuration attempt............ Not applicable
    - Time at last unsuccessful configuration attempt.......... Not applicable
    Last AP message decryption failure details
    - Reason for last message decryption failure............... Not applicable
    Last AP disconnect details
    - Reason for last AP connection failure.................... Not applicable
    - Last AP disconnect reason................................ Not applicable
    Last join error summary
    - Type of error that occurred last......................... Lwapp discovery request rejected
    - Reason for error that occurred last...................... Layer 3 discovery request not received on management VLAN
    - Time at which the last join error occurred............... Jan 27 17:45:49.705
    AP disconnect details
    - Reason for last AP connection failure.................... Not applicable
                                                                               Ethernet Mac : 00:00:00:00:00:00  Ip Address : 10.1.20.7
    (Cisco Controller) >show interface summary 
     Number of Interfaces.......................... 4
    Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
    ap                               LAG  20       10.1.20.231     Dynamic No     No   
    guest                            LAG  30       10.1.30.231     Dynamic No     No   
    management                       LAG  10       10.1.1.231      Static  Yes    No   
    virtual                          N/A  N/A      1.1.1.1         Static  No     No   
    SWITCH
    witch#show run
    Building configuration...
    *** deleted for breverity ***** 
    no aaa new-model
    clock timezone AWST 8
    system mtu routing 1500
    ip routing
    ip dhcp pool WAP_Pool
       network 10.1.20.0 255.255.255.0
       default-router 10.1.20.1 
       option 43 hex f104.0a01.01e7
    ip dhcp pool Clients
       network 10.1.30.0 255.255.255.0
       default-router 10.1.30.1 
       dns-server 203.0.178.191 
    ip dhcp pool test
       network 10.1.1.0 255.255.255.0
       default-router 10.1.1.1 
    crypto pki trustpoint TP-self-signed-4082587776
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-4082587776
     revocation-check none
     rsakeypair TP-self-signed-4082587776
    *** deleted for breverity ***** 
    *** deleted for breverity ***** !
    interface FastEthernet0/3
     description *** WLC ****
     switchport trunk encapsulation dot1q
     switchport mode trunk
    interface FastEthernet0/4
     description **** AP *****
     switchport access vlan 20
     switchport mode access
     spanning-tree portfast
    interface FastEthernet0/5
     description **** AP ****
     switchport access vlan 20
     switchport mode access
     spanning-tree portfast
    interface FastEthernet0/6
    i*** deleted for breverity ***** !
    interface Vlan10
     description *** Managment ***
     ip address 10.1.1.230 255.255.255.0
    interface Vlan20
     description *** WIRELESS APS ***
     ip address 10.1.20.1 255.255.255.0
    interface Vlan30
     ip address 10.1.30.1 255.255.255.0
    ip classless
    ip route 0.0.0.0 0.0.0.0 10.1.1.1
    ip http server
    ip http secure-server
    ip sla enable reaction-alerts
    l*** deleted for breverity ***** 
    ntp clock-period 36028827
    ntp source FastEthernet0/1
    ntp server 121.0.0.42
    ntp server 202.127.210.37
    end
    I have also placed a Device in Vlan 20 and it is able to ping the WLC and the WLC can ping it s routing is working. 
    Thanks 

    Hey Scott, 
    I gave that a shot and still no luck, log's from AP boot up:
    IIOS Bootloader - Starting system.
    flash is writable
    Tide XL MB - 40MB of flash
    Xmodem file system is available.
    flashfs[0]: 67 files, 9 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 41158656
    flashfs[0]: Bytes used: 20894208
    flashfs[0]: Bytes available: 20264448
    flashfs[0]: flashfs fsck took 20 seconds.
    Base Ethernet MAC address: f4:4e:05:b7:1e:84
    Ethernet speed is 100 Mb - FULL Duplex
    Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
    File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
    executing...
    Secondary Bootloader - Starting system.
    Montserrat Board
    40MB format
    Tide XL MB - 40MB of flash
    Xmodem file system is available.
    flashfs[0]: 67 files, 9 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 41158656
    flashfs[0]: Bytes used: 20894208
    flashfs[0]: Bytes available: 20264448
    flashfs[0]: flashfs fsck took 21 seconds.
    flashfs[1]: 0 files, 1 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 12257280
    flashfs[1]: Bytes used: 1024
    flashfs[1]: Bytes available: 12256256
    flashfs[1]: flashfs fsck took 1 seconds.
    Base Ethernet MAC address: f4:4e:05:b7:1e:84
    Boot CMD: 'boot  flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
    Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
    File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Fri 19-Dec-14 11:20 by prod_rel_team
    Montserrat Board
    40MB format
    Tide XL MB - 40MB of flash
    Initializing flashfs...
    flashfs[2]: 67 files, 9 directories
    flashfs[2]: 0 orphaned files, 0 orphaned directories
    flashfs[2]: Total bytes: 40900608
    flashfs[2]: Bytes used: 20894208
    flashfs[2]: Bytes available: 20006400
    flashfs[2]: flashfs fsck took 14 seconds.
    flashfs[2]: Initialization complete.
    flashfs[4]: 0 files, 1 directories
    flashfs[4]: 0 orphaned files, 0 orphaned directories
    flashfs[4]: Total bytes: 11999232
    flashfs[4]: Bytes used: 1024
    flashfs[4]: Bytes available: 11998208
    flashfs[4]: flashfs fsck took 0 seconds.
    flashfs[4]: Initialization complete.
    Copying radio files from flash: to ram:
    Copy in progress...CCCCC
    Copy in progress...CCC
    Copy in progress...CCCC
    Copy in progress...CCCC
    Copy in progress...CC
    Copy in progress...CCCC
    Copy in progress...CC
    Copy in progress...CCCCC
    Copy in progress...CCCC
    Copy in progress...CC
    Uncompressing radio files...
    ...done Initializing flashfs.
    Radio0  present 8764 8000 0 A8000000 A8010000 0
    Rate table has 650 entries (20 legacy/224 11n/406 11ac)
    POWER TABLE FILENAME = ram:/Q2.bin
    Radio1  present 8864 8000 0 80000000 80100000 4
    POWER TABLE FILENAME = ram:/Q5.bin
    Radio2 not present 0 0 0 0 0 8
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
    Processor board ID FGL1838X4T1
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 8.0.110.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: F4:4E:05:B7:1E:84
    Part Number                          : 73-15243-01
    PCA Assembly Number                  : 000-00000-00
    PCA Revision Number                  :
    PCB Serial Number                    : FOC18343WPR
    Top Assembly Part Number             : 068-05054-03
    Top Assembly Serial Number           : FGL1838X4T1
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-CAP3702I-Z-K9
    % Please define a domain-name first.
    Press RETURN to get started!
    *Mar  1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
    *Mar  1 00:00:19.755: Registering HW DTLS
    *Mar  1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is  2500
    *Mar  1 00:00:19.815: APAVC:  WlanPAKs 42878 RadioPaks  42270
    *Mar  1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
    *Mar  1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
    *Mar  1 00:00:26.167:  record size of 3ss: 1168 read_ptr: 4F9698E
    *Mar  1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
    *Mar  1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
    *Mar  1 00:00:31.251:  record size of vht: 2904 read_ptr: 4F9698E
    *Mar  1 00:00:31.407: Wait until the stile protocol list is initialized.
    *Mar  1 00:00:32.651: Start STILE Activation
    *Mar  1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
    *Mar  1 00:00:35.447: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Fri 19-Dec-14 11:20 by prod_rel_team
    *Mar  1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
    *Mar  1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Mar  1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
    *Mar  1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
    *Mar  1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
    *Mar  1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
    *Mar  1 00:00:50.431: DPAA Initialization Complete
    *Mar  1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
    *Mar  1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
    *Mar  1 00:00:53.867: Currently running a Release Image
    *Mar  1 00:00:54.287: Incorrect certificate in SHA2 PB !
    *Mar  1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
    *Mar  1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Mar  1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
    *Mar  1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
    *Mar  1 00:01:02.707: APAVC: Registering with CFT
    *Mar  1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
    *Mar  1 00:01:02.707: APAVC: Reattaching  Original Buffer pool for system use
    *Mar  1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
    %Default route without gateway, if not a point-to-point interface, may impact performance
    *Mar  1 00:01:10.103: AP image integrity check PASSED
    *Mar  1 00:01:10.187: Incorrect certificate in SHA2 PB !
    *Mar  1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
    *Mar  1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Mar  1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
    *Mar  1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Mar  1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar  1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Mar  1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    Not in Bound state.
    *Mar  1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
    *Mar  1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
    Not in Bound state.
    *Mar  1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
    *Mar  1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP

  • Paid Down Payment Request from 2007 not visible in 8.8

    Hello experts:
    I recently upgraded a customer from 2007 to 8.8, and an existing fully paid down payment request is now not visible anymore in the "incoming payment" window due to some of the changes in 8.8. But I also cannot reconcile the transaction because paid down payment requests cannot be reconciled.
    I tried to cancel the incoming payment in order to apply it differently, but that also fails with a strange error message ("Cannot cancel payment: One of the credit notes has been deleted. [3524-6]").
    I could create a JE to transfer the balance from the liabilities account to the asset account within the BP, then reconcile the two transactions in the asset account, and effectively having zero balance in the liabilities account, but I'd like to reconcile the two transactions in the liabilities account as well, so that they're really closed.
    Any ideas?
    Thanks in advance.
    Joerg.

    Thanks for your reply Jitin.
    My issue is related to A/R, so the mentioned query doesn't turn up any results. However, a few minutes ago, the same issue appeared in A/P, so I tried the query again, with no luck.
    I will proceed to log a support message and post back with the solution.
    Thanks,
    Joerg.

  • HCM Event Manager is not visible in HRMS 9.1

    Hello Everyone,
    We are trying to access below : Set up HRMS > System Administration > HCM Event Manager
    but the HCM Event Manager is not visible to me.Also when I tried to access the objects in Application designer like HCM_EM_MONITOR component and other related objects, I cant see any of them
    Please let me know if there is any setup or steps to import the project?
    Thanks
    Amit

    This has been moved from HCM to Enterprise Components. You see this a lot, where functionality is moved from the application to Enterprise Components. This makes is easier to patch frameworks, since this is separated from the application core. You saw the same shift with for example Approval FrameWork. From PT to HCM to EC.
    In 9.1 to be found in:
    Main Menu > Enterprise Components > Events & Notifications > Event Framework >
    HCM 9.0
    PeopleBooks > PeopleSoft Enterprise HRMS 9.0 Application Fundamentals PeopleBook > Working with HCM Event Manager
    HCM 9.1
    PeopleBooks > PeopleSoft 9.1 PeopleBook: Events and Notifications Framework >

Maybe you are looking for