Request in cube is not avilable for reporting, how to trace this in chain?

Hello,
We have cube that gets the delta daily.
Some day, some body did full load and its failed.
Regular process chain delta load were sucessfull but they never turned reportable since the previous full load was failed.
Since we have not received any failure notification.
Is there way we can find if the request is not reportable to get notification>?
I have checked the avilable process types, it looks like we need to build custom process type.
Please advice.
Cheers
Angelo

Hi Angelo,
If the full update is run via a process chain then you can configure for that chain that if the load fails you get an email notification,
in the setup of the email notificaton you could make a reference to the target cube and then at least you know that if you don't fix this issue subsequent requests will not be available for reporting in the cube.
Best Regards,
Des

Similar Messages

  • How to make cube data avilable for reporting

    Hello,
    I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
    Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
    My cube data is not available for reporting, how can I make it available for reporting?
    Regards,
    Tejas.

    Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
    1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
    2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
    If the problem still persist, then I would just delete all the data from the cube and reload the data again.
    thanks.
    Wond

  • Loaded data not visible for Reporting?

    Hi all,
       In the info cube, the data is not visible for reporting, How can i make it available for reporting,
    When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
    " There is an inconsistency between the load status of the data and the option of reporting on this data.
    There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
    How do i find out the inconsistancies?
    PS: All the requesta are delta upload
    Thanks n regards
    Girikumar

    Hi Girikumar
    Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
    Let me knwo if it not resolved..
    Bye
    Shu Moh..

  • How to make data loaded into cube NOT ready for reporting

    Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
    Please suggest. <removed>
    Thanks

    See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
    Hope this helps...

  • Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

    In our java web application trying  establish the connection for sharePoint 2013
    using  Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
    claims only.
    In the Sharepoint 2013 server in the IIS manager settings for authentication it is  enabled for both Windows claims and Forms authentication,
    but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
    you" in the browser  Kindly help me on this.

    Hi,
    This issue is always caused that you had missed FBA configuration in web config of your web application.
    You can configure the FBA authentication then check whether it works.
    http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
    http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
    more reference:
    http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • "FUNCTION NOT AVILABLE FOR THIS RESPONSIBILTY. CHANGE RESPONSIBILITY ....

    We have a custom form developed based on Template.fmb, when we register in custom application top(XXLLP_TOP/forms/US folder), it is giving error "Function not avilable for this responsibilty. Change responsibility or contact sysadmin".
    In AOL responsibility , all we did was
    a) Registered custom form XXLLPINVPKWB for custom "LLP Custom Application",
    b) Registered a custom Fuction for the form
    c) Assigned the Function to the Inventory menu (INV_NAVIGATE)
    d) Wwitch Resp to the Inventory resp
    e) Click on the menu entry for our custom form and its giving and error that the Function is not available for this responsibility. Please contact system admininstrator
    My understanding is that when I click the menu it should atleast
    give an error that the fmx is not available in so and so path
    in the status bar and not the error message "Function is not available ...
    Please help us resolving this issues
    Thanks,

    Did you set the CUSTOM_TOP variable for this application in the env file? What does "echo $XXLLP_TOP" return after sourcing the env file as applmgr user?
    Are you able to access other forms in this responsibility?

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried

    I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried as it my new ipod and am not able to restore it.pls help.

    i have done that .:(..PLs help me restoring it to older version.though i have a back up file.in itunes..am not able to restore it.as itunes is not asking for resotre option..pls help me

  • Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again.

    Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again, after deautherizing it. HELP ME PLEASE

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch.

    Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch. Cannot
    scale/create batch.
    While auto shipping the above error i am getting. Please somebody help on this.
    Thanks.

    Hi,
    Could you please let us know which Oracle Product was installed and it complete 5 digit version.
    Regards,
    Prakash.

  • I purchased an audiobook from my ipod touch. But it partially downloaded 1 portion. I tried to redownload but iTunes asked me if I wanted to buy it again(not download for free) How do I redownload without paying again?

    I purchased an audiobook from my ipod touch. But it partially downloaded 1 portion. I tried to redownload but iTunes asked me if I wanted to buy it again(not download for free) How do I redownload without paying again?

    http://support.apple.com/kb/ht2519

  • I'm registered to itunes and recommended to download icloud but was told I'm not registered for icloud how do I register for icloud?

    I'm registered to itunes and recommended to download icloud but was told I'm not registered for icloud how do I register for icloud?

    To register in iCloud, you need an iPhone, iPad, iPod touch or Mac in order to log in iCloud for the first time. See > http://www.apple.com/icloud/setup
    If you haven't got any of these devices to set up iCloud, you can't use iCloud. Anyway, probably you don't need it if you only have a PC and an iPod nano (it doesn't use iCloud)

  • Photoshop 2014 (fresh install) cant open a video because: -. the dynamiclink media server is not avalable – any idea how to fix this on os x 10.5.8 ?

    Photoshop 2014 (fresh install) cant open a video because: …. the dynamiclink media server is not avalable – any idea how to fix this on os x 10.5.8 ?

    i found the error!
    little snitch on os x blocks something (i dont know what exact) of adobe in the background. i have no rule defined for adobe in little snitch, so everything of adobe can go out.
    when i stop little snitch, everything works fine - photoshop opens videos without the medialink error, photoshop starts up in seconds and premiere starts without a quicktime error.
    i report the problem also to objective developement to fix this!
    mad

  • Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

       Hi
    Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

    Dear Srikanth,
    I am not sure, if my answer will satisfy you, but anyway I will try:
    Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
    Well, to solve situation you have few ways:
    1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
    2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
    3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
    Best Regards
    Arnost

  • How to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

    how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

    how to restore:
    http://support.apple.com/kb/HT1414
    error code 21 fix
    http://support.apple.com/kb/TS3694#error1015

Maybe you are looking for

  • IPod Classic: Photos Issue: Photos on iPod Show Black Screen - Replicated!

    Issue / My Solution related to format = PC / Windows *FINALLY! I've replicated the issue where some random pictures in iPod photos show as a thumbnail, DON'T show when clicked with center button (instead a nice friendly black screen is shown) but DO

  • SAP Predictive Analysis error  while executing KNN algorithm

    Hi , I am getting 'duplicate column name' error, while implementing knn algorithm in SAP Predictive Analysis. Please help me Please look into my screenshots for configurations. I am taking the data from database. Thanks Niyati Message was edited by:

  • Excel 2010 - How to remove leading zero's

    I have a column of ID numbers, which looks similar to this: 001 002 010 011 I want to remove all the leading zero's so it looks like this: 1 2 10 11 Can anyone help please?

  • Firefly Media Server - Won't start!

    I had a lot of troubles getting it installed but finally got it working yesterday when messing with the daemons. Yesterday all I had to do was start them up in this order /etc/rc.d/dbus start, /etc/rc.d/avahi-daemon start, and /etc/rc.d/mt-daapd star

  • Upgraded iOS 7 in iPad 2 - microphone stopped working

    I recently upgraded my iPad 2 to iOS 7 and I also updated my apps to ios7 compatible. But I realized that my microphone has stopped working when I try to make a call through skype. I can hear the person I'm calling but they can't hear me. I also trie