Request is failing while Initializing delta(without data)

I am facing this error while Initializing delta load. pls provide me the solution.
Request REQU_3X0SE4NMKVSV8RHYUF24SL4UB(207,922) has not or not correctly been updated; Please edit.
Activation of data records from ODS object YF_O47 terminated.
Request REQU_3X0SE4NMKVSV8RHYUF24SL4UB(207,922) has not or not correctly been updated; Please edit
Message no. RSM096
Diagnosis
Request REQU_3X0SE4NMKVSV8RHYUF24SL4UB (207,922) for DataSource 8ZMXAPO03 from source system BW2-021 has the status (green) and a smaller SID (is thus older) than the request that you currently want to update into the ODS object.
System response
This is not possible since the sequence of the requests must be kept when wanting to update them into an ODS object. Delta- and init. requests must be updated into the ODS in the request sequence.
Procedure
First update request REQU_3X0SE4NMKVSV8RHYUF24SL4UB(207,922) for DataSource 8ZMXAPO03 from source system BW2-021 from the PSA into ODS object.
If you do not need the data in request REQU_3X0SE4NMKVSV8RHYUF24SL4UB (207,922) in the ODS object, you can also set the total status for this request to (red) in the Monitor, on theStatus tab page. When checking for completeness, the system then ignores the request.
Thanks in advance
Raghavendra Rao kolli.

There is old request REQU_3X0SE4NMKVSV8RHYUF24SL4UB not being deleted and causing the problem.
GO TO PSA tree of this infosource and delete the request.
Also DO you need any data already avilable in the ODS ?
If not required delete all psa data from psa tree.
Gopi

Similar Messages

Initialize delta without data transfer not possible

Hullo,
I want to switch the upload procedure for an ODS from full to delta. For I have researched SAP Note 689964 and executed the program RSSM_SET_REPAIR_FULL_FLAG for the ODS-object and datasource. It successfully modified the request and set the 'REPAIR_FULL' flag.
Now I want to change the InfoPackage from Full update to Delta. According to the note I have to perform an init simulation, my problem is that the option initialize delta without data transfer is in display mode only (i.e. it's gray and I cannot select it).
The InfoSource in question is "0HR_PY_1". I've checked several others and with some it is possible to select the initialization simulations and with others it's not.
My questions are a) Why is it this option grayed out? and b) What can I do to enable the selection of this option?
Any help is appreciated.

Hullo AK,
thanks for pointing out that note, sadly it's for "0HR_PY_PP_1" and not "0HR_PY_1".
However it lead us to note '611199'...
Symptom
Some attributes of the following DataSources are not defined.
0HR_PY_1 DataSource:
- Commit after initialization phase
- DeltaInit Simulation
0HR_PY_PP_1 DataSource:
- Commit after initialization phase
0HR_PY_PP_2 DataSource:
- Commit after initialization phase
Other terms
PXDW, extractor, posting transfer, settlement, PCPO, PCP0
Reason and Prerequisites
The SAP settings for the DataSources are incomplete.
The following attributes should be set:
0HR_PY_1 DataSource:
- Commit after initialization phase: no commit
- DeltaInit Simulation: Mode is not supported
0HR_PY_PP_1 DataSource:
- Commit after initialization phase: no commit
0HR_PY_PP_2 DataSource:
- Commit after initialization phase: no commit
Solution
Import the corresponding Support Package into the Plug-In Releases 2003.1 and 2002.2 and copy/activate the DataSources in the plug-in system again.
If the correction is imported, you can no longer select the "DeltaInit simulation" option for the delta initialization of the 0HR_PY_1 DataSource/InfoSource.
As long as you have not imported the correction or you are using an even older plug-in release, you should never select the "DeltaInit simulation" option during the delta initialization for the 0HR_PY_1 DataSource/InfoSource. The 0HR_PY_1 DataSource does not support this mode.
The 0HR_PY_1 DataSource only supports the delta initialization (without the DeltaInit simulation) and subsequent delta calls.
Sadly enough, not what I wanted to read, but well at least I now know that I shouldn't look into this solution anymore.
Again, thanks for your help.

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

Failed while initializing SNMP

------------------------ Mon Jul 16 13:55:52 GRNLNDST 2007 ------------------------
Failed while initializing SNMP
Error initializing subsystems
Agent exited at Mon Jul 16 13:55:52 GRNLNDST 2007 with return value 55
Could not start agent. Initialization failure

Seems your agent is not running, Kindly check the status of agent. Try to start your agent. Check your emctl.log file for error and paste here if you face any issue.

Failing while initializing static data

hie all!
i'm making a jar file using build.xml configuration.
<target name="makejar">
<jar destfile="${lib.dir}/${jar.name}" basedir="${base}/bin/">
<manifest>
<attribute name="Main-Class" value="${jar.main-class}"/>
<attribute name="Class-Path" value="1.jar 2.jar 3.jar 4.jar"/>
</manifest>
<fileset dir="${lib.dir}"/>
</jar>
</target>
Now, in the main class, i m creating static icon as:
new ImageIcon(new Object().getClass().
getResource("/mypackage/icons/pid.gif"));
But i when i execute the jar : java -jar my.jar
it fails with NullPointerException at javax.swing.ImageIcon(Url) construtor.
The icons are inside the package.
How can i resolve getting URL object for the icons?
One more thing is that ... the jar files are inside this my.jar
Upon looking at few messages, i saw, we need to unjar the jar to use
the jar files inside it.
But, then how can i use my jar for webstart demonstration, which is the ultimate purpose.
Please give your valuable suggestions about the mentioned problems.
Thanks and Regards,
Giriraj

Assuming you have the following package structure.
\mypackage
...my.jar
...other1.jar
...other2.jar
...\icons
......pid.gif
Try
// note only the path under the root with no leading slash.
new ImageIcon(getClass().getResource("icons/pid.gif"));The other jar files will not work if they are inside your jar "my.jar";
Just place the other jars in the same directory as your jar and they will be automatically downloaded.
Note you will need the other jars listed in your manifest class-path.
Class-Path: . icons/ other1.jar other2.jar
Note the jars must also be in your JNLP
<resources>
 <j2se version="1.4+"/>
 <jar href="my.jar"/>
 <jar href="other1.jar"/>
 <jar href="other2.jar"/>
</resources>rykk

Generic Delta without date field and without document number

Hi Experts,
I have created Funtion Module Extractor program, but my strcture not having any date field and document number fields.
Please let me know how to maintain the delta for extractor program.
Thanks in Advance.
Chandra

hi,
it is not mandatory to have doc number or date fields for delta,
u must have other fields which could change and try to find those fields and try, chk with the business for their delta requirement else go with full load.
Ramesh

While initializing delta

Hello
i have the followig error when i want to initialize delta for my info pakage:
Could not determine BW release of logical system 'BWXXXX'
can anyone tell me what it means?
Regards

Hi,
It is beeter to contact basis team first and then work on it once you get the clear details from basis people.
Regards,
Raghavendra Rao.kolli

Requests enter "failed" state without initiating approval

Hi there. Our OIM 11g BP4 installation started having problem with requests. Some of them simply fail, and failing frequency is increasing.
For all failed request the error message is the same:
IAM-2050014:An error occurred while initiating approvals for request oracle.iam.request.exception.ApprovalServiceException: oracle.iam.request.exception.ApprovalPolicyAccessDeniedException: User oiminternal does not have access to SEARCH entity of type APPROVAL_POLICY.. The corresponding error message is {1}.
Two peculiar things are worth noting:
- the better part of those requests share the same template and are set to be auto-approved, via a proper approval policy;
- failed and completed requests are intermixed, i.e. after a failed request there can be a completed request a moment later, or the other way around. That excludes a permission problem like the error message seems to suggest, IMHO.
A real-life example taken right from our installation:
1852 Provision Resource Request Completed
1853 Provision Resource Request Failed
1854 Provision Resource Request Failed
1855 Provision Resource Request Completed
1856 Provision Resource Request Completed
1857 Provision Resource Request Failed
1858 Provision Resource Request Failed
All those request share the same request template and the same approval policy (which, as stated, is set to auto-approve the request).
It looks like SOA approval is not even started, so this behaviour should not be related to SOA.
Any hint of where to look to find the reason for these fails? It is a production environment and this behaviour is starting to become a serious problem.
Thanks,
Rpatri

You mean patch 14036801.
Yes, that was probably the solution: after applying the patch there have not been failed request.
Thanks.
Rpatri

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

SharePoint 2010 -
I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
Export works fine. But during Import, I get the following errors
[ListItem] [Admin] Progress: Importing
[ListItem] [Admin] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Hol plans.xls] Progress: Importing
[ListItem] [Hol plans.xls] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Time.doc] Progress: Importing
[ListItem] [Time.doc] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [AP Docs] Progress: Importing
[ListItem] [AP Docs] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Progress: Importing
[ListItem] [Update - June 27th.pdf] Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf] Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf] Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Progress: Import did not complete.
1. Does the console application treated as a Sandbox Solution?
2. Do I need to configure CAS policy in wss_usercode.config? and what?
3. What else could be configured to make this work?
I have tried adding the following in wss_custom_minimaltrust.config but no avail.
<SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
and
<PermissionSet
 class="NamedPermissionSet"
 version="1"
 Name="SPRestricted">
<IPermission
 class="SqlClientPermission"
 version="1"
 Unrestricted="true"
 />

</PermissionSet>
UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
Regards, Amit Gupta

Hi,
According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
Simple solution is to change the trust the trust level to FULL: <trust level="[Full]" originUrl="URL" />
In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
For more information, you can refer to:
http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Initialize Delta Process without data transfer

Dear Gurus,
I am facing a problem when I try to "initialize Delta Process without data transfer" an ODS.
I first deleted the initialization request in Scheduler->Initialization Options for Source system and then I executed the Infopackage.
The status of the new init. request is red and I get the following error message :
Request REQU_DMJI1J66397EM5OZMC1EQJLWZ (192.384) for DataSource 8ZSALETXT from source system PW1CLNT600 has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object.
This is not possible because the sequence of requests has to be followed.
Delta- and init requests have to be updated to the DataStore object in the request sequence.
The problem is that I can't find this request (REQU_DMJ...) anywhere.
Could you please explain me what to do with this issue and tell me if it is possible to make the system just ignore this request ?
Thank you in advance
Fabien

Hi............
U r not able to find REQU_DMJI1J66397EM5OZMC1EQJLWZ in the Manage screen of the ODS right?.........
Go to RSRQ...................give this request number and check...........if the Status is green........in the Header tab check whether the load is till PSA or not............if it is till PSA............then go to the Status tab and click on Process Manually to push the request in the target........otherwise just make the QM status red here..............then do the load.......
Regards,
Debjani.........

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?

My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?

Welcome to Apple Support Communities
Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact

Website page with jquery datepicker does not calculate dates while other pages without datepicker and all other browsers do their job

I wrote two mobile pages with dreamweaver cs5.5 and jquery. Both do online calculations. Both appear and accept input. One page using jquery datepicker does not calculate. Solely in Firefox. IE9, Safari, Chrome display correct results. Debuggers show no error. Firebug seems telling me that Firefox does not get a result from datepicker function.

Thanks. But did not help. I had done this several times before, reload, clear cache, disable extensions etc. Always used standard theme. I tried the same on two different machines, with next to last version and after having installed the latest version. In the debugger I can see that variables "zeit1" (jquery datepicker) were not filled with the datepicking results, while in all other browsers zeitX shows the current date and the app shows the results that are expected. Given that another comparable app - only without date and datepicker functions - works in Firefox I think one should explore why solely datepicker - or the function using datepicker - does not show results solely in Firefox on desktop (no mobile device with Firefox on hand) . I indeed believe that there is a mistake in my code which is detected only by Firefox (10.0.2 at the present time, with Win7 64bit - had the problem with 3.6... on another machine). Given that you could run the app with results on your machine: could it be the context of locale/culture (here: de)?
Kind regards

Does "Init without data transfer" creates delta queues?

Does "Init without data transfer" creates delta queues?

Hi,
Yes, Once initialization successful for particular source system, you can see entry at Delta Queue(RSA7).
Hope it Helps
Srini

Request is failing while Initializing delta(without data)

Similar Messages

Maybe you are looking for