Request is successfully but datarecords are not loaded into the InfoCube

Hai
Im loading the data into the 0PUR_C01 from the two datasources 2LIS_02_ITM and 2LIS_02_SCL.
First im trying to load the data from the 2LIS_02_ITM int the InfoCube 0PUR_C01.
Then request is loaded successfully and im getting the reporting symbol in the 'Manage' of the InfoCube.But
Transffferd Records = 22000
Added Records = 0
why it is like that ..
pls tell me i ll assing the points
Mubeen

Hi,
Problem becasue of missing Industory sector setting in R/3 . This setting has to be done before filling the setuptable .For more information search the forums with BF11.
Re: 0PUR_C01
Re: Not getting data added to IC for 2LIS_12_VCITM
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Similar Messages

Muse CC tutorials - I am trying to watch them but they are not loading. Anyone else having this problem?

Muse CC tutorials - I am trying to watch them but they are not loading. Anyone else having this problem?

Hi
is there any particular tutorial or is it happening with all of them. Could you please provide the url? Did you try it in a different browser?

To open "Java Preferences," you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!

To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!

Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

HI,
Have you done this before ? And if so, is photo stream turned on on your iphone and ipad. and as Alfred DeRose pointed out they must both on the same icloud account.
If you're new to this, you might want to do some research. Photo stream is different from camera roll and albums. Many have been on this sight looking for their photos stored in icloud after restore, etc. and they're not there. Also, after thirty days icloud deletes your photos from photo stream.
So if you're not aware, you might want to google your question. We're using the camera connection kit soon and I am learning about it. From all I've read, I'm also not the biggest icloud fan. I use dropbox. We plan to put photos taken on ipad with a camera/iphones into albums on the ipad. We'll keep all on the sd card until (and after) they can be uploaded to a computer.
An example of an article we can learn from -
http://www.macobserver.com/tmo/article/how-to-understand-and-work-with-your-iclo ud-photo-stream
Hope this helps.

Data is not loading into the target table in BODS

BODS job is executing successfully but data is not loading.
can anyone please let me know what is the problem
Regards,
Deva

Hi Deva
The Information provided is very limited, what are your Source and Target Databases?
What is the structure of the job design?
If the job completed without error, review the job logs to confirm that rows were indeed processed.
Regards
Charles

I have completed installation of Oracle 10g but I could not login into the

Please I have completed installation of Oracle 10g into my laptop but I could not login into the database to create my new tables through SQL*Plus.
I don't know what to type into these text fields. (1) Name, (2)Password and (3) Host.
Please can someone help me urgently
Fola

There are different things here to know about.
Did you also create database while installation ?
If yes then
C:\> set oracle_sid=yoursid
C:\> sqlplus username/password
If not then, please create the database first.
For "I don't know what to type into these text fields. (1) Name, (2)Password and (3) Host."
(1) Name : This is user name.
(2) Password: This is password.
(3) Host: This is oracle net service name configured in tnsnames.ora. Please refer to http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/toc.htm
-aijaz

Keyfigure with units are not loading into transactional DSO in APD

Hi,
I am loading data from a Query to transactional DSO through APD. I have formula and new selection keyfigures in my query.
I mapped these keyfigures with units to the DSO. But i didnot see data for these keyfigures and also the units are not loaded.
I can see the values and units displayed in my query ?
What may be the reason for this issue even though every mapping is correct?
Please help me on this issue.

Hello Dear
When you are getting blank date , your update rule processes its value as 00000000,
Now in the date conversion routine if you go , you will find that after the routine one exception is written for this value..means this value is not accepted.
So maintain a date and load data.
Award points if it solves your problem/concern
Thanks
Tripple k

Users are created but Roles are not Provisioned in the Target System

Hi,
It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
In the provisioning job SetABAPRole&ProfileForUser,
It is says In the Error putNextEntry failed storing
Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
MSKEY 58437
Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
Regards,
Hakim

Hello Nits,
since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
Regards,
Steffi.

Convert a catalog form PSE 7 to PSE 13 : Conversion works, but images are not related to the catalog anymore so you have to connect each single picture !!! How can I get the right relation automatically ?

My images are not related to the converted catalog, only preview works, tags and other information is given, but the (network) path to the original images is missing and is substituted by a local path with c:\. How can I solve the problem automatically ?

I actually need to apply this to at least a couple different layouts. Two exampled below (The outlined boxes are text areas, the black boxes where the product images will go.)
I prefer InDesign5, but I have 6 too.

Urgent ......data is not loaded into the ODS

Hi,
we try to load the data in to ODS via the Infopackage. Job is finished with Green status. In the requests tab I saw that transferred are 1486 & the addded records are 1486.
But the ODS sah empty structure, no records are loaded into the ODS?
Any suggestions please?
sailekha

Hi
It is availabe for reporting the status is green
all the related objects are active
I try to actvate ODS Data, But it asks me the job name
I am unable to actvate the Data of ODS.
Still I have the same problem how to proceed further........please let me´know
Yesterday It is working fine but today I got this problem in Production.
any suggestions please......
thanks in advance

When I sort bookmarks in "organize bookmarks" they are not sorted under the bookmarks pulldown menu. Latest additions are not integrated into the sort

When I sort bookmarks in "Organize Bookmarks" they are not sorted under the pulldown menu on a regular page. Recently added bookmarks are not inegrated into to sorting.

See this:
[https://support.mozilla.com/en-US/kb/Sorting+bookmarks#Sorting_by_name]

Events invitations are note added into the Calendar

I have a back end and front end calendar 6.3 environment with convergence connecting to the front end. When [email protected] invite the [email protected] to an event only an email notification of the event is sent to the userB, the invitation is not added into the userB calendar, in order to accept, decline or cancel the invitation.
For this environment i have both iwc and uwc active, but no matter what interface I use the behavior is the same.
My question is:
1. In a back end and front end calendar environment how should sent the emails notifications?
2. Why userB can´t see the invitation userA sent to him?
3. Where and how I can verifity the invitation is sent? in the back end / front end?
I saw the thread http://forums.sun.com/thread.jspa?threadID=5432165. But the users have all the icsExtendedUserPrefs attributes. I also set the variables user.cal.enablenotify and user.cal.enableinvitenotify but still not getting the invitation within the calendar.
Products version:
Sun Convergence 1.0-12.01 (built January 16 2010 - 21:38:59)
Sun Java(tm) System Calendar Server 6.3-20.01 (built Oct 23 2009)
Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)

Duplicate thread, refer to:
http://forums.sun.com/thread.jspa?threadID=5437550

Bank statements are uploaded successfully, but transactions are not shown in FF_6/FEBAN

Hello Friends – Can you please clarify my doubt with regards to the issue with Bank statement upload.
We uploaded the Bank statements successfully. After that when I go to FF_6/FEBAN, I do not see the transactions and Bank statement we received has got transactions.
It shows Statement status “8”.
As Documents are not posted (I also checked in FEBEP table, do not see any line items), I should delete these Statements and upload them again?
Thanks

Hi,
Please check if you have marked " Do Not Post" in FF_5 for importing bank statement.
This could be one of the reason why you are not seeing bank statement in SAP.
Regards
Nitin

[SOLVED] Many modules are not loaded in the Arch USB key installation.

Hello!
I installed Arch Linux on my USB key. I did it few months ago and it worked, I had portable arch.
Yesterday I decided to make a fresh installation. Unfortunately after booting it from my USB key
most of the modules were not loaded. Because of that I couldn't start the X server and connect to
the internet (ethernet card was not detected).
Even after loading the module which corresponds to my ethernet card manually (modprobe e1000e) it was not
displayed in the lsmod list.
I though "maybe I screwed something up during the installation?". To find out I used GParted to copy
my OS partition (perfectly working Arch Linux installed on the hard drive) to the USB key. Of course I changed the UUID of the USB partition.
After booting it I was suprised because the situation did not change - modules that are loaded on my main system for some
reason were not loaded on it's exact copy placed on the USB key.
I have no idea why my portable OS is acting like this.
Commands below were executed on another PC so don't look for the e1000e module.
$ lsmod
Module Size Used by
ext4 474699 2
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83440 1 ext4
usb_storage 48007 2
ata_generic 3378 0
pata_acpi 3395 0
hid_generic 1161 0
usbhid 40577 0
hid 90742 2 hid_generic,usbhid
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30821 3
pata_atiixp 4819 0
ehci_pci 4000 0
ohci_pci 4040 0
ohci_hcd 23905 1 ohci_pci
ehci_hcd 59252 1 ehci_pci
usbcore 180104 6 usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
ahci 23056 0
libahci 21642 1 ahci
usb_common 1656 1 usbcore
libata 171112 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
scsi_mod 130669 4 usb_storage,libata,sd_mod,sr_mod
nouveau 904702 0
button 4677 1 nouveau
video 11196 1 nouveau
mxm_wmi 1475 1 nouveau
wmi 8419 2 mxm_wmi,nouveau
i2c_algo_bit 5399 1 nouveau
drm_kms_helper 36254 1 nouveau
ttm 63507 1 nouveau
drm 238238 3 ttm,drm_kms_helper,nouveau
i2c_core 24164 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
$ lspci #Just a fragment
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at de00 [size=256]
Memory at fdaff000 (64-bit, prefetchable) [size=4K]
Memory at fdaf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 07-00-00-00-68-4c-e0-00
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
$ cat /var/log/Xorg.0.log
[ 59.424]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 59.424] X Protocol Version 11, Revision 0
[ 59.424] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 59.424] Current Operating System: Linux sanguine 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[ 59.425] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2c39c1f9-de3e-4907-93dc-8b77422a07a1 rw
[ 59.425] Build Date: 09 January 2014 08:47:24AM
[ 59.425]
[ 59.425] Current version of pixman: 0.32.4
[ 59.425] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.425] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.425] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 13 12:55:56 2014
[ 59.433] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.437] (==) ServerLayout "Layout0"
[ 59.437] (**) |-->Screen "Screen0" (0)
[ 59.437] (**) | |-->Monitor "Monitor0"
[ 59.441] (**) | |-->Device "Device0"
[ 59.441] (**) |-->Input Device "Keyboard0"
[ 59.441] (**) |-->Input Device "Mouse0"
[ 59.441] (==) Automatically adding devices
[ 59.441] (==) Automatically enabling devices
[ 59.441] (==) Automatically adding GPU devices
[ 59.456] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.456] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 59.457] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 59.457] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.457] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 59.457] (WW) Disabling Keyboard0
[ 59.457] (WW) Disabling Mouse0
[ 59.457] (II) Loader magic: 0x804c80
[ 59.457] (II) Module ABI versions:
[ 59.457] X.Org ANSI C Emulation: 0.4
[ 59.457] X.Org Video Driver: 15.0
[ 59.457] X.Org XInput driver : 20.0
[ 59.457] X.Org Server Extension : 8.0
[ 59.459] (--) PCI:*(0:1:5:0) 1002:796e:1458:d000 rev 0, Mem @ 0xd8000000/134217728, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
[ 59.459] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.460] Initializing built-in extension Generic Event Extension
[ 59.460] Initializing built-in extension SHAPE
[ 59.460] Initializing built-in extension MIT-SHM
[ 59.460] Initializing built-in extension XInputExtension
[ 59.461] Initializing built-in extension XTEST
[ 59.461] Initializing built-in extension BIG-REQUESTS
[ 59.461] Initializing built-in extension SYNC
[ 59.461] Initializing built-in extension XKEYBOARD
[ 59.461] Initializing built-in extension XC-MISC
[ 59.461] Initializing built-in extension SECURITY
[ 59.461] Initializing built-in extension XINERAMA
[ 59.461] Initializing built-in extension XFIXES
[ 59.461] Initializing built-in extension RENDER
[ 59.461] Initializing built-in extension RANDR
[ 59.463] Initializing built-in extension COMPOSITE
[ 59.466] Initializing built-in extension DAMAGE
[ 59.468] Initializing built-in extension MIT-SCREEN-SAVER
[ 59.470] Initializing built-in extension DOUBLE-BUFFER
[ 59.472] Initializing built-in extension RECORD
[ 59.475] Initializing built-in extension DPMS
[ 59.477] Initializing built-in extension Present
[ 59.479] Initializing built-in extension DRI3
[ 59.481] Initializing built-in extension X-Resource
[ 59.483] Initializing built-in extension XVideo
[ 59.485] Initializing built-in extension XVideo-MotionCompensation
[ 59.487] Initializing built-in extension XFree86-VidModeExtension
[ 59.490] Initializing built-in extension XFree86-DGA
[ 59.492] Initializing built-in extension XFree86-DRI
[ 59.494] Initializing built-in extension DRI2
[ 59.494] (II) LoadModule: "glx"
[ 59.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 60.382] (II) Module glx: vendor="NVIDIA Corporation"
[ 60.388] compiled for 4.0.2, module version = 1.0.0
[ 60.388] Module class: X.Org Server Extension
[ 60.388] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 60.401] Loading extension GLX
[ 60.401] (II) LoadModule: "nvidia"
[ 60.401] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 60.455] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 60.455] compiled for 4.0.2, module version = 1.0.0
[ 60.455] Module class: X.Org Video Driver
[ 60.462] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 60.462] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 60.464] (++) using VT number 1
[ 60.464] (EE) No devices detected.
[ 60.464] (EE)
Fatal server error:
[ 60.464] (EE) no screens found(EE)
[ 60.464] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 60.464] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 60.465] (EE)
Last edited by Skitter (2014-02-16 20:57:21)

Please post the output of:
dmesg -c
modprobe e1000e
dmesg

Synced bookmarks can be searched for and found but many are not displayed on the complete scrollable bookmarks list.

How odd. I've a somewhat complex bookmarks menu hierarchy, perhaps two dozen folders each containing between five and fifty bookmarks as well as a sub-folder or two. All of this is synced and displayed correctly with the bookmarks tab in the app, except for some of the more recent bookmarks that not organized into folders, and are floating inside the bookmarks menu. Of thirty or so, only five appear. Yet, when I search for them within the app they are found, including several bookmarks made today. These are bookmarks contained in the bookmarks menu but not in any particular folders. Clearly they are synced, yet the entire contents of the bookmarks menu are not displayed correctly in the app. Syncing otherwise seems swift. I've less than 600 bookmarks in total. I seek not to search for specific bookmarks but to browse my entire collection, so you can sense my frustration. I'd call this a bug. Any thoughts? Thanks!

No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

Request is successfully but datarecords are not loaded into the InfoCube

Similar Messages

Maybe you are looking for