Request License key for Install ECC6

Dear Sir:
I had installed the IDES mySAP ERP 2005, and willing to request a license key from the SAP web page,
but on the step 1 "Select Installation ", there is no ECC6 relative could be choose.
My question is if the installation should be registered by SAP? or should I do something else?
Sincerly need your help.
The information about installed machine is listed below:
Operating System: Windows Server 2003 with service pack 2
Database: Oracle 10g release 2
SAP product: IDES mySAP ERP 2005
Active Hardware Key is R0558308287
We also have an installed Solution Manager system for generating the install key.
Our company name is Everscience Information System Co.
Thanks and Best Regards

Hello Frank,
The first thing to do is make sure that you have an installation number for an ECC 6 system. If you have an installation number for this already then you can request a license for this system under this instalation number on the sap service market place.
http:
service.sap.com\licensekey
However you have said that your previous system was IDES mySAP ERP 2005. If so it is unlikely that the installation number you have for this system is valid for the license for the new system. In this case you need to contact your local contracts department and request the appropriate installation number.
Once you have the installation number you can request the license at the site above. Requesting a license is a self service on the market place.
Regards,
David

Similar Messages

Requesting License key for NW04s Cluster Portal

hi,
We have installed NetWeaver 04s Clustered portal. (1CI + 1DI ).
While requesting the License key with SAP, do we have to follow the same method (as that of stand-alone) for Clustered NW04s portal also?
OR is there any other method ?
Which System Name we have to specify Node01 or Node 02 ? or both ?
Is there any specific SAP note for clustered Portal Licensing ?
Regards
Sunil Kulkarni

Hi Sunil,
Check this weblog:
Enterprise Portal 6.0 licensing behavior in a hardware cluster installation
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Requesting a license key for WEBAS 640 SP9

guys
i am trying to request the license key for my webas my temp one has already expired. i cant seem to find my hardware key ,i tried looking in configtool but i cant seem to find it can you guys help me out please?
thanks,
Guy

Make sure the connection is configured as "Direct Connection to Dispatcher" and "Default" transport layer.
Is your Web AS running on port 50000?
Also, if you are having license problems and you loose your temp license the Web AS will only run for 30 minutes so start it up and try to connect within that time limit.
Nick

Installing the License Key for Solution Manager installation

Hi,
Any Idea how can I get License Key for solution manager installation? Solution manager installation do not requires a key of Solution Manager.
When I want to download a new license file form the SAP market place.SAP I ask for a key of Solution Manager.
Thanks

I guess it is hardware key. Go to the Tcode slicense and there you will be able to find out the active hardware key. Take it!!

License key for a J2EE Engine standalone system

Hi,
I installed a J2EE Engine 7.0 standalone system (at first screen of installation, I selected node SAP ERP 2005 Support Release 2 to start the installation of SAP NetWeaver's software units - not software units of SAP ERP, NOT node SAP NetWeaver 2004s Support Release 2).
In http://service.sap.com/licensekey, I request a license key for my new J2EE Engine standalone system. At first page, I only see 2 installation options to select, these're corresponding to SAP ERP and SAP SOLUTION MANAGER. I select SAP ERP and at System Information page, I choose SAP product SAP NETWEAVER.
Then, I install the license key received via Visual Administrator - Server 0 - Services - Licensing Adapter. But 28 days bypass, system get down because of license expiration (not relates to the date validation).
The same thing happens when I make other license keys by choosing SAP product SAP WEB AS and SAP ERP.
Someone tell me what's wrong?
Thanks,
Toan Do

Hi Toan,
I hope you are following the procedure given in the above mentioned link (which i gave).
In the Visual Administrator choose Server 0 --> Services --> Licensing Adapter. The system data that you need to request the license from the SAP Service Marketplace appears.
¡ Installation number (if it exists)
¡ System ID,
¡ System number (if it exists)
¡ Hardware key
¡ Current release
 2. Under the Internet address service.sap.com --> mySAP Business Suite, you can get to the initial page of the license key requests in SAP Service Marketplace. Here you will find all the information you need to request license keys.
 3. Enter your e-mail address in the request. The license key will be sent to you promptly by e-mail. Alternatively, you can also download the license key from the SAP Service Marketplace.
Do not make any changes to the license key. To import the license key, the file must not have been changed.
 4. In the Licensing Adapter in the Visual Administrator choose Install License from File.
 5. Select the license file that you want from SAP.
If this doesn't solve your issue, I suggest that you post a message with SAP.
Regards,
Siddhesh

License keys for mySAP Business Suite

Hello,
We have IDES system installed with Oracle database. IDES system was a part of installation of productive system.
Our license expired 5 days ago. I requested new license from the site and only recieved temporary one. It says:
"License keys for mySAP Business Suite
The database you selected has not been licensed under this installation number. "
What steps should i take to recieve unlimited license?
If it requires Oracle license, should i order it from SAP or i can purchase it separately?
Thank in advance.

HI Naresh
I did these steps and I upload the license in backend but the message says: 2 licenses succesfull installed then in the list of license
there are two red trafic light
ITP Q1851760771 NetWeaver_DB6 11.08.2009 31.12.9999 Perm 0020310707 000000000310985405 Not yet valid
ITP Q1851760771 Maintenance_DB6 11.08.2009 12.11.2009 Perm 0020310707 000000000310985405 Not yet valid
I don`t know what`'s the problem?
any suggestion
Regards
Danny
Edited by: Graciela Troya on Aug 13, 2009 12:35 AM

Volume License Keys for Non-Profit Organization

Hello everyone.
I am in need of a volume license key for Microsoft Office Professional 2010 for a not for profit organization.
They do not have the I.T. cloud infrastructure in place for office365.
The organization that I represent is the "Homeless Intervention and Shelter House" (H.I.S. House)
http://www.hishouseplacentia.org
Can I contact Microsoft directly to obtain a key or do I have to go through a reseller?
Thank you.
Paul La Capria
Owner, MICRO Technologies

Hi,
We mainly provide technical support for Office products in this forum, since your request is about licence and the policy may differ in different areas, I suggest you contact the local customer service to get more appropriate support:
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to optain a license key for SAP NW Gateway ABAP?

The hints in the howto-manual do not seem to work - and they are inconsistent in the sense of: Request for a license key for SQL-Server and being returned a MaxDB key. Also the installation show SAP-INTERN, whilst the ley is for DEMOSYSTEM.
The key i did receive was:
Begin SAP License -
SAPSYSTEM=NSP
HARDWARE-KEY=C0700372363
INSTNO=DEMOSYSTEM
BEGIN=20120212
EXPIRATION=20120513
LKEY=MIIBOwYJKoZIhvcNAQcCoIIBLDCCASgCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQcwggEDAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMjAyMTMxNzA0MDlaMCMGCSqGSIb3DQEJBDEWBBSv8eBlzmPgKE+T9golPZcWdlpS/zAJBgcqhkjOOAQDBC8wLQIVAKDDrp46jv2TI9CZXMDc7pbCsPblAhR3PvtTPkGcYpBCrh4U57z5qf/QbA==
SWPRODUCTNAME=NetWeaver_MSS
SWPRODUCTLIMIT=2147483647
SYSTEM-NR=000000000311700111
Installation Number wrong, INSTNO wrong.
There had been some tricks to get around this issue with the demo of NW 7.02. Also i do not find the Java Stack as promised in the Windows release - i do only find it in the Linux one.
For 16GB downloads the result was poor. Can anybody help out?
My best regards
Joern Brabandt

Hi Gregor,
I'm also having issues with the license for the SAP NW Gateway Trial running on Mac Mountain Lion:
----- Begin SAP License -----
SAPSYSTEM=NPL
HARDWARE-KEY=00938415609
INSTNO=DEMOSYSTEM
BEGIN=20130404
EXPIRATION=20130704
LKEY=MIIBOwYJKoZIhvcNAQcCoIIBLDCCASgCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQcwggEDAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMzA0MDUxOTE0MzFaMCMGCSqGSIb3DQEJBDEWBBTRUCCubDadBbaZ8w3bQ7HF+yb9JTAJBgcqhkjOOAQDBC8wLQIVAJZItJG3PCK1bcAd40eClYgUfp03AhQXiqegi/wlPttvPkrXmJoKP1jOxg==
SWPRODUCTNAME=NetWeaver_ADA
SWPRODUCTLIMIT=2147483647
SYSTEM-NR=000000000311926766
System accepts the install but says "inactive hardware key". I've reinstalled VMware Fusion 5 and all of the linux and SAP components and still get this error message.
Thanks in Advance,
Pete

How Do I get a License key for Trial version from the App Store?

I downloaded a Trial version of Aperture 3.1.2 a few weeks ago from the App Store. I love it. Now I want to buy it, but, can't figure out how to get a license key from the App Store. When you start up Aperture Trial version, a 'nag' box comes up asking if you want to buy the application or continue using the trial version or Authorize (I guess that is what you would pick once you have the key). If I pick "Buy", the application opens Safari and takes me to the Apple online store, NOT the App store! At the Apple Store, you can buy the key for $199 or an upgrade from a previous version for $99. Whoopie! What is Apple thinking? The App store is selling Aperture for $79.99. I guess that means you don't get the box or written manuals (which I haven't used for any software in many years).
So how do I get a license key for the App Store version? Do I just Go to the App Store, pay the money, download and install the program over again. Then transfer my trial version library somehow? Then deinstall the trial version? I'd love to buy and use Aperture for $79.99, but, I'm not willing to pay $199 for it. Apple has me confused.
Anybody have a clue?

Thanks for the 1-800 call tip Allen.
P.S. I'm quite willing to put in the time and effort necessary to learn Aperture (or any other software I decide to use, "Pro" or not). I simply don't see the value in buying the box version when I'm pretty sure I won't be using any paper manuals. I very comfortable using online help files, having done so as a professional numerical control programmer for many years in my work. For reference, I'm retired, on a limited income and will be using Aperture as a rank amateur photographer who could use a little more horsepower than iPhoto offers.
I'll call Apple tomorrow.
Kevin

How do I get evaluation license key for linux NW04s installation.

Can anyone help please.
I am going through this site on linux , but there is no link to get the evaluation license key for NW04s.
I downloaded all the binaries.
Thanks.
TK

hi,
on the installler DVD, you should find README or INSTALL file. You could get from there about the link to extend your eval key.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

How do I get a license key for Xcelsius Enterprise 2008 sp3

Hello
The comapny I work for are partners with SAP, so what is the quickest way for me to get a license key for Xcelsius?
Thanks
Eddie

Hi Eddie,
You can contact the Customer care or your account manager for the license keys. Incase you have access to SAP portal(service.sap.com) you can request for keys from there as well.
Thanks,
Amit.

License key for "SAP NetWeaver 2004 - Trial Version on Linux"

I want to evaluate the software u201E SAP NetWeaver 2004 - Trial Version on Linuxu201C and i need a license-key for test drive.
Unfortunately I can not find a page where I can request a valid license for our test. I only find license keys for the u201E SAP NetWeaver 2004s - Trial Version on Linuxu201C.
Please can You help me?

Hello
yu can download abap trail veriosn from this link
but u have to create a/c in dsn.sap.com
link is as below
https://www.sdn.sap.com/irj/sdn/nw-downloads
1)SAP NetWeaver 7.01 - ABAP Trial Version
2)SAP NetWeaver 7.0 (2004s) - Trial Version on Linux SAP Evaluation Software
3)SAP NetWeaver 2004 - Trial Version on Linux SAP Evaluation Software
that will hepl out 100 %
Regards
Jayesh

RE: License Key for GRC

Hi all,
I wanted to install GRC5.3, do we need license key to Install GRC5.3.
Thanks,
SS

Hi.
As Alpesh told you check with ur account and basis team.
As far i know licence key is only for Netweaver JAVA. once NW java is installed, you can install GRC Add on using JSPM.
If your company has purchased SAP GRC 5.3 licence, you can able to download GRC 5.3 components in SMP.
Regards
Gangadhar

Do we need License Key for SAP IK

HI,
Do we need to request for License Key of SAP Integration Kit and add in License Keys in CMC of BO EDGE 3.1.
Early response is appreciated.
Thanks,
Bharath

Hi Ingo,
Thanks foy your reply.
IS The License Key which we downloaded from Market Place is enough for SAP IK or do we need to Raise a request for New License Key For SAP IK
Thanks,
Bharath

License key for software installation

I can not find my license key for the new hp deskjet 1010 printer that I bought and I have the disc that came with the printer but my laptop does not have a place to put a disc in for installation so I tried to download the installation info for my printer from the internet and I keep getting ask for my licensing key number but I dont know where to find this info. Please advise.

Hi, Which license key are you talking about ? hp deskjet 1010 printer does not require license key to install. Please use the CD which came with the peinter. Regards.

Request License key for Install ECC6

Similar Messages

Maybe you are looking for