Request Load status Done but customer not replicated

Hi,
Please help. We are trying to replicate customer from ECC to CRM using request load mechanism. The status of the request is done. It's not stuck in inbound nor outbound queue and did not create a bdoc error. However, when we try to check in transaction bp, still it did not exist.
Thanks!
Warm regards,
Mike

Hi Mike,
Was any BDoc created? If so, did it contain classic and/or extended data?
One thing to check is the filter settings in accordance with note 788822. (Missing leading zeroes is a common cause of problems.) Please also bear in mind that the filter settngs defined for the objec tin R3AC1 are always applied in addtion to the fitlers defined for the request itself.
I hope this helps.
Brian.

Similar Messages

Three Orders Ship confirmation done but Invoice not Generated

Dear all,
There are three orders which are ship confirmed but Invoice not Generated.Please help to check on this.
A quick reply will be very much helpfull.
Thanks for your help in advance.
With Regards,
Sunil Kumar Mallina.

Is the order line closed?
Go to the line > tools > workflow status. Do you see any errors?
Go to the header and check workflow status. Do you see any errors?
Are other orders/lines getting invoiced?
Is the Autoinvoice process running?
Is the item set to be invoicable?
Does the line type / order type you used have a step for invoicing?
Sandeep Gandhi
PS: Try posting in OM thread for quicker response.
Order Management

Software request shows as completed but software not deployed to user computer.

User from my organization has submitted software request from the SCCM software portal, but installation doesn't happen. The User was automatically added to application deployment
active directory group , but software not appearing in the application catalog for further process and software request shows installation completed. What would be the issue?
SN

Ah... it looks like you are using the Application Approval Workflow Solution, which brings SCOrch and Service
Manager in to play. You'll have to trace through the runbook to see what actions trigger the closing of the service request. If you're not seeing anything happen on the ConfigMgr side, its likely a problem with the runbook.
Do you see the application request in ConfigMgr at all? Does it actually get approved by the workflow?
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

FF says "done" but page not loaded

Occasionally, when I open FF pages will not load including the home page. The "done" message appears at the bottom, but the page is not loaded. If I type a URL in and try to go to that page, the same thing happens. I must restart my computer to correct the issue. Once I do that, it is fine and it may be a few days before it happens again.

Welcome Ben Harris
The disk will not play and if I look at it I can tell only a very small portion has been written.
Two items are suspect....available HD space, and the media you are currently using. Please tell us about both.
I recommend no less than 20GB's in addition to using Verbatim/Maxell DVD-R and burning from a disc image at 4x or slower using apple's Disc Utilities or Roxio Toast. Is this what you are doing?
Please also drag and drop the plist for iDVD to the trash (empty the trash) Then Restart ther computer. Use the Finder to locate this item and drag it to the trash:
com.apple.iDvd.plist

Loaded itunes 7 but will not open

hi
i have loaded successfully version 7 of itunes but it keeps coming up with an error report.
no error code number, just keeps asking to send error report or don't send error report.
If i click on an itunes song the same thing happens.
Please help
Dassie

Uninstalled old iTunes, deleted all old iTunes files in Program Files folder, except two that would not delete, and deleted all iTunes I could find in the registry. Downloaded and install latest version of iTunes. iTunes will open and quickly close with black windows, twice. Troubleshooting says "incompatible Application." Any suggestions?
susan1945

Cannot log into my account, request for new password but did not receive it

Hi All,
I had an account which is a japanese account with some credits in it. so I haven't use that account apart from my ibook & imac got stolen, So finally got a new mac, managed to log into my english account but the japanese account kept telling me I got the wrong password, so I request new password to be send but don't receive it. contacted the Japanese Apple site but no reply... hope my account hasn't been hacked? also what happens to those music I bought? Do I create a new Japanese account so I can buy my music?

Hey Rawansarah,
Thanks for the question. I understand that you are experiencing issues with Apple ID security. It may be best if you contact our Account Security Team to troubleshoot these issues:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thanks,
Matt M.

Communication Channel status successful but file Not Delivered.

Hi All
I have a receiver communication channel which is showing status as SUCCESSFUL but the log says The message status was set to NDLV. Due to which am unable to retrigger it even form Message Monitoring
Its set to FTP & is not received at that side.
Kindly put in your inputs on the possible solution for this issue.
Regards
Soumen!!!

I dont think it is held in queue.....you will get an error (the one which you got) and then the message will go into Error state.
When the channels are stopped and it receives a file it raises an error alert and is set to error state. Later when channel is started the file gets processed(You can try doing it.I did). Here it gave the error message but sets the channel to successful. Thats what is botehring me.
Looks like you are scheduling the receiver channel....why?
Had some requirement...
@ Balaji : Its successful

Idoc status green but data not posted correctly to destination system.

Hi,
Can anyone help me out with idoc problem that I am facing.
The problem has come out with outbound idoc.
The status of the idoc is green when it has been sent but the objects that has been sent with that idoc are not getting posted in the destination system.Some of them are posted correctly but some of them are not.
What may be the reason behind this.
Regards,
Rachana.

Good morning
What was the resolution here? We are siitng with the same problem, but IDoc's are correct, but data packet not processed.
Thanks, have a nice day
Cj

Itunes loads main page but will not open anything else

the main page for itunes opens but if i click on something like a song that is under the most downladed category or a movie under the rental category it says it loads but never goes to it no matter how long i leave it.

Hello crawford1968, your efforts are appreciated! Was there any physical or water damage on the phone? The factory reset is the last resort option. Have you tried letting the phone's battery drain and then charge the device to see if the power on will respond? We can definitely look into replacement options since the device is not responding. We can be reached via these channels: http://vz.to/19p59Ec
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Premiere 8.0 Welcome Screen will load the editor, but will not open a project...

Hi all, this is a small issue but annoying to me... After the welcome screen comes up, I click on "Open Project" and then on a name of my project I would like to work with. After a few seconds, the welcome screen loads the project editor, but the screen stays green, no matter how long I wait, and the projcet I selected does not open. Then I have to go to Files->Open Project and load the project again. Shouldn't the project load automatically if I selected this option from a welcome screeen? I have the 8.0.1 update installed...

Thanks for you post Steve, you're right. But even if I select a specific project name
from the Open drop down menu, it still opens a blank screen. Can live with that, but they should fix
it... The same thing happens when you click on "New Project" in Welcoem Screen: blank screen opens and then you have to go to File -> New project. But if the editor is already open, the problem does not exist, it will do the right thing right away (i.e. open a project or start a new one from the Welcome Screen command)...

TV@nywhere loads on ME but will not run

Whenever I try to run this program on my Windows ME computer, I get "Program Error. Your program is making an invalid dynamic link call to a .DLL file" . If I exit from the hotkey at the bottom of my screen, I get an error saying "Winciemamgr has caused an error in Kernel32.DLL. Wincinemamgr will now close."
This is really frustrating and I do not know what to do....any ideas?

DLL stands for DynamicLinkLibrary. These files are common files that software manufacturers link to, so they don't have to include the same code over and over and over again. When new versions of software come out, the size of the .DLL file decreases/increases but the name stays the same. An "invalid link" occurs when an application attempts to "link" to this file that has been changed and no longer contains the code needed to operate.
You and I cause these problems when we install and uninstall programs. It is up to you and I to find the correct .DLL file and re-install it. Hint: It's usually the largest size and/or latest date stamp that works for all programs.
I run WinME on my game machine attached to my 57" HDTV and get over 250 frames per second out of a Radeon 9000 Pro.
WinME is a fantastic gaming platform when you get the correct .DLL's installed. WinME was installed correctly a year ago and still runs rock stable.
My game machine has an Albatron KX-400 motherboard with an Athlon XP 1800+ overclocked to 2.3GHz (XP 2800+) and runs WinME. I don't use the TV@nywhere in this machine. It is not the machine listed in my signature.

My computer and iPhone will NOT connect, Sync is loaded on both but will NOT connect

I don't know details. I followed the instructions and I can not connect to Firefox. The game is Kingdom of Camelot. Other tabs post but not Camelot.

Can you be a little more specific about what are you trying to do? Your issue doesn't seem related to Firefox.
I will try to help you as soon as I understand the issue in detail.

Firefox, all the sudden, will now load the site but will not let me go to a chat area in the website, what has happened?

I have a site that i am on all the time and have never had a problem at all using it, but the other day all the sudden i could log into the site but when i go to use the chat room feature in the site i get kicked back out to the sign in area. I have used on other comp to make sure not site and have been able use w Internet Explorer... So i am at a loss as to what has happened all the sudden. Please help me...very frustrated w this... Jared

Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.

When I download divx on firefox as they said it does not aks me to load, it downloads but does not load, how do I get it to ask me to ask me to download know automatically?

I had divx on but took it off as they said to download another programe for downloading movies. (paid) when I download any programe I used to be asked if I wanted to install it. but know it does not and I have trouble finding where the download was and how to install it many times.

Ohrita you can download the installation files for Creative Suite 5 at Download CS5 products. You can verify the software license you purchased by checking your account at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

My printer will load the paper but will not print

the printer setting says ready but when i try to print it goes offline

Hi thanks for the reply,
Please follow the following steps for this printing issue.
1. Check if printer able to print test page by following the below mentioned document.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01409695&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
2. Install and Run Print diagnostic utility for this issue from the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&lc=en&product=3374275&tmp...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Request Load status Done but customer not replicated

Similar Messages

Maybe you are looking for