Request management

Dear All,
I have set up SOLMAN Development client and linked to SAP Development client.
I have generated IMG and would like to manage configuration from SOLMAN.
- Would configuration in IMG in SOLMAN trigger a transport request.
- Are there any prerequisite settings
- Can we manage requests and its sequence.
Reg
Suresh

Hello Suresh,
Below are the answers to ur questions.
Would configuration in IMG in SOLMAN trigger a transport request. Yes
(ii) Are there any prerequisite settings? Yes
BBP should have been created and approved.
The development system is available.
(ii)Can we manage requests and its sequence. Yes
Hope this helps. Let me know if you need anyother information.
Rgds
Manish

Similar Messages

  • How to configure request manager service for multiple website in one web application

    I have set up sp 2013 as below:
     web application : wa1
    site collection : sc1
    sp site: site1, site2
    I used 2 WFE, 1 APP, how can I use request manager service to control  site1 to wfe1, site2 to wfe2?
    Awen

    That's not what i'd describe as load balancing.
    A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
    fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
    This article shows how to configure the RMS and may help show how your request is difficult to configure:
    http://www.harbar.net/articles/sp2013rm2.aspx

  • Creating a New Task in SOLMAN Change request Management

    Dear all,
    We are using SOLMAN 4.0 and scm functionality.In the change request screen we have a create follow up task(+ icon on top left).What is the use of this task,can we asign a task to some particular person?for example can i assign task to tester?If the task has not completed the task,while closing the correction will it give error?
    Please give your suggestions.
    Thanks in advance,
    Avinash.

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

  • Help me configure Change request management !!!

    Dear friends,
    I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
    Just want to know Clear few things before i proceed..
    I am also refering SPRO and related notes
    Scenario :
    I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
    R03 has 3 clients, 300 600 700..
    In R03 300 is the development client, 600 is quality client, 700 is the production client.
    SOL has 2 clients, 100, 200
    With 200 as the production client.
    Q.1) <b>Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).</b>
    Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
    When i logon to client 200 and  Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
    Then by default it take the previous client ( client 100) as the change request management client.
    ( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
    I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
    <b>Plz let me know what do i do to set the change request client to 200??</b>
    Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
    We are planing to establish domain links between the two systems( ie both the domain controllers) ??
    Is this the right strategy ??
    <b>Any other method that u can recommend  ??</b>
    Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
    Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
    When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
    These destinations works well,
    but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations  i test these destinations using Remote Logon i get error,
    " no authorization to logon as trusted system"
    I went thru one note which recomended Kernel upgrades to solve the problem,
    I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
    <b>what is your kernel patch levels in sateliite and solman systems.</b>
    Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
    We also create RFC destinations to client 000 of all the sateliite system,
    <b>dont u think these RFC destinations might interfere with each other??</b>
    Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the  configuration documents with me..
    Please note :
    <b>All the contributors would be handesomely rewarded with points .</b>

    Hi,
    Check this
    Note 128447 - Trusted/Trusting Systems
    For your Q4.
    Q3.)
    Establishing Domain link - That's the right way. Go ahead.
    These are the steps.
    <b>1.Define Transport Routes for System Landscape</b>
    assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
    <b>2. Activate Extended Transport Control</b>
    The CTC parameter should be '1'
    <b>3.Configure Transport Strategy</b>
    Deactivate the QA Approval.
    <b>4. Activate Trusted Services.</b>
    5.Activate Domain Links.
    You have to activate domain link between systems.
    6. Generate RFC Destinations to Client 000
    Hope this helps.
    feel free to revert back.
    --Ragu

  • Get  max100 requests from request manager

    Hello!
    I'm requesting requests for a user from the RequestManager over the ContentServices-API.
    Now I've the question if there is possibility to get maximal 100 requests? I've tried to set the Options.RETURN_COUNT and give that to the request manager, but that doesn't work. I only get an ParameterError.
    Any ideas?

    fnd_concurrent_requests has responsibility_id. You can use this column to determine the ORG_ID.
    However this may not always correct, as user may change the profile option after running the request. But in your environment if this profile option is not changed after it first assigned to responsibility then following sql should give you ORG_ID from concurrent request.
    select fnd_profile.VALUE_SPECIFIC('ORG_ID',null, RESPONSIBILITY_ID ,null,null,null) from fnd_concurrent_requests where request_id = <your_request_id>
    HTH
    Dinesh S.

  • SOLMAN- Change Request Management

    we have a request from one of our customers a big insurance company, to use the "change request management" out of the SOLMAN for non-SAP solutions.
    is it possible ? what are the advantages and disadvantages?
    thanks
    Amnon

    Hello Amnon,
    SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
    Please use the following links which may help you in a better way....
    Manually registering a non-SAP system in SMSY
    http://www.sappro.com/downloads/NonSAPsystems.pdf
    SAP Solution Manager Ready
    SAP Solution Manager Ready
    A General overall discussion on Solution Manager http://www.sap.com/platform/netweaver/components/solutionmanager/index.epx
    Hope it helps.
    Cheers,
    Satish

  • Solman Change Request Management Issue - about create task list

    Dears,
        We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
    Thanks
    Roger

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

  • Change Request Management  "There is no task list for this project"

    Hello!
    I would like to use the functionality of CharM in SOLMAN 4.0.
    When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
    If I create my own task list via Task list --> create
    I get the warning "You cannot change task lists in the SAP namespace"
    What are the steps to define task list for my project?
    Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
    The second warning I get: "NO CTS projects created yet" or
    "The Solution Manager project does not have an active CTS project yet".
    How can these warnings/errors be corrected?
    Thank you very much!
    regards

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

  • Change of systemlandscape in Change Request Management

    Hi,
    We have a Systemlandscape with 4 SAP Systems. Now we would like to reduce the landscape to 3 systems. We use the Change Request Management and we work with urgent corrections. Which are the problems by changing the landscape?Which is the best approach to get from 4 to 3 Systems without loosing any transports?
    Best regards, S.Blaser

    Stefan,
    Have you checked SAP note 987927? It can help.
    Regards,
    Raquel Cunha

  • Change Request Management in Implementation projects or not?

    Hello guys,
    We are starting a Change Request Management project at a customer.  We discuss  in the blueprint phase whether we should be using it only for maintenance activities, and not for implementation projects.  We have some people that can be working both in maintenance and also in projects at the same time.
    We want to understand whether that scenario is possible and also whether is advisable.  We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
    What are the drawback, difficulties, considerations you may consider in making that decision?  Is it logic to work that way or is it better just to implement it for the whole installation, including implementation projects?
    Esteban Hartzstein
    Edited by: Esteban Hartzstein on Jan 20, 2010 3:37 PM
    Edited by: Esteban Hartzstein on Jan 20, 2010 3:39 PM

    We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
    this you can do either via SE03 / Display/Change Request Attributes  / SAP_TMWFLOW     Request created using Change Manager          X          X / Defaul for all client = Mandatory
    or
    you can achieve this by just activating the CHaRM in SolMan ( solar_project_admin / system landscape / CHARM)
    Nesimi

  • Change request management in solution manger release 7.1 or 7.0

    Hi All,
    Can any body please explain me how to configure change request management in solman release7.1 and if it is possible please send document to my below maild Id.
    And please let me know what are the steps needs to be done satellite systems, we have EP7.0 landscape also there .do we have to do any additional configuration for that in solman side?
    I appreciate for your prompt response
    Thanks in advance
    My Id: haritechies gamil.com
    Regards,
    Hari Prasad . L

    Hi
    Adding more to it
    Use the following link,
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    Regular correction
    https://websmp202.sap-ag.de/~sapidb/011000358700000086572008E.sim
    Later login to solman enter tcode SPRO and goto scenario specific Change Request management node and start configuring by
    going through the IMG Help and as per requirement.
    Create a maintenance project and Activate Charms
    https://websmp202.sap-ag.de/~sapidb/011000358700005479242006E.sim
    Regards
    Uday

  • Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

    sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How big effort it is to setup Change Request Management?

    We are interested in implementing Change Request Management into our Solution manager 7.0.
    What size of an effort in mandays it actually is and what kind of professional roles are required to set it up? Some background information for your responses:
    implementation project is already there in Solman (SOLAR01/02) and is already live
    satellite system connections within SMSY are already active
    no central CTS/CTS+ is currently in use
    when having CHARM it is assumed that also CTS+ should be used
    So, I guess we are in a typical situation where implementation project has ended and live and support organisation and tools are being setup. There we need CHARM and CTS+.
    I have read lots of SDN threads and blogs, but did not get a clear picture how big effort setting up CHARM is. Please note, I not looking for config guides now, just your experiences. Even if am not interested in config guides, could you at least describe the main steps that are necessary in setting up CHARM?
    br Kim

    Hi
    Adding more to it
    Use the following link,
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    Regular correction
    https://websmp202.sap-ag.de/~sapidb/011000358700000086572008E.sim
    Later login to solman enter tcode SPRO and goto scenario specific Change Request management node and start configuring by
    going through the IMG Help and as per requirement.
    Create a maintenance project and Activate Charms
    https://websmp202.sap-ag.de/~sapidb/011000358700005479242006E.sim
    Regards
    Uday

  • Request management service issue with SSL Sites

    Hi guys,
    I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications),  our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
    sites over 80 port with no SSL works as expected.
    I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
    this post  solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
    I've already checked the
    good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
    says  something about don't support path based site collection.
    So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
    Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'.  (Just starting the service Event viewer begis to have a bunch of this errors)
    03/28/2014 13:34:01.96 w3wp.exe (0x1184)
    0x154C SharePoint Foundation
    Request Management ai2q3
    High Reached maximum number of failed machines based on ping results for this routing group
    53c2819c-8216-20f3-68c0-c0a3e55c92d5
    03/28/2014 13:34:01.96 w3wp.exe (0x1184)
    0x154C SharePoint Foundation
    Request Management ai2q4
    Medium Unavailable machines based on ping results: MACHINENAME
    53c2819c-8216-20f3-68c0-c0a3e55c92d5
    03/28/2014 13:34:01.97 w3wp.exe (0x1184)
    0x1C2C SharePoint Foundation
    Request Management adc7u
    Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
    53c2819c-8217-20f3-68c0-cb2f392c388b
    Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
    I would appreciate some feedback about this. Another posts with similar issues:
    http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html 
    http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316 
    Regards,

    Hi,
    According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
    It’s a known issue that the request management service could not work with the SSL site.
    We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
    What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
    http://support.microsoft.com/kb/2817429/en-us
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Solution Manager 3.2 SP 8- Change Request Management Configuration Problem

    Hi friends,
    We are in process of implementing SOLMAN 3.2 SP8 in our landscape.I am facing  problem in configuring change request management.
    When the developer is working on an urgent correction document we are facing a problem.The steps we are following are here under provided.
    Step 1 :
    Selected Action "In development" - > it created the transport request in the dev system.
    Step 2:
    Action "Log into System" -> made correction attached to the transport request manually and released the task.
    Step 3:
    Action "Release transport requests" -> The transport request in the development was released.
    Step 4:
    Went for action "Pass to correction" -> I am facing exceptions which conveys
    Status was reset by system
    A condition is not satisfied because of an exceptional situation
    Not all transport requests yet released
    And we would be thankful if you provide the authorization required for the different roles in the change request management.I have followed the help file of SOLMAN 3.2 and create the users as under
    User - Role
    SOCM_RQSTR - ZSAP_SOCM_REQUESTER
    (Derrived from SAP_SOCM_REQUESTER)
    SOCM_DVLPR - ZSAP_SOCM_DEVELOPER
    (Derrived from SAP_SOCM_DEVELOPER)
    SOCM_CHNGNGR - ZSAP_SOCM_CHANGE_MANAGER
    (Derrived from SAP_SOCM_CHANGE_MANAGER)
    SOCM_CHNGNGR - ZSAP_SOCM_IT_OPERATOR
    (Derrived from SAP_SOCM_IT_OPERATOR)
    Even then I am facing problems while developer creating transport requests and while logging into development system.
    I tried adding S_RFC,S_RFCACL auth objects to their roles but did not help.
    Pl. suggest.
    Thanks & Regards
    Mrutyunjay
    Message was edited by: Mrutyunjay Rao Dora

    Hi all,
    We are trying to implement the Change Request Management piece in Solution Manager 3.2. 
    We are facing the following issues which I think relate to the same reason:
    1)We have created a Maintenance Project in SOLAR_PROJECT_ADMIN and assigned it a logical component, which consists of our two system landscape (namely DEVàQAS). We have also created the IMG project in the DEV system and have distributed that IMG project to both the Solution manager system and the DEV system. Now we have to make the maintenance cycle and task list for that maintenance project, but as we select the project and click on “create project cycle” it shows the message "The project is not released. Hence cycle can not be created". It is showing the status of project as locked .How can we open or unlock the project to remove the error?
    2) Also after selecting the SMI project when we click on the button “CTS status switches” or “project specific Transport route” it responds with the error "Project landscape not configured; set the project status to "open" first ".
    3)When we click on “synchronize single project” it prompts for the login of connected system (Development System) and after login, it gives an error "Warning, problems during synchronization of the system Landscape".
    For Error resolution, we have checked the system landscape and it does not give us any errors. We have done that, both from the solution manager by going to the transaction SOLAR_PROJECT_ADMIN -->  >system landscape tab>selecting our logical component and doing a check by clicking the "Check system Landscape" button. It returns with "no Errors". We also did a check on the TMS configuration by logging directly on to the TMS domain controller system and checking the Transport routes. We have checked the RFC connections without any errors.
    Any help would be greatly appreciated.
    Thanks
    Abhi

  • GRC 10.0 Access request Management Audit

    Hello All,
    Can Anyone let me know what  Auditors Check When they Audit GRC 10.0 Access request Management (excluding Configuration).
    Thanks
    Mohammed Wasim

    Hi,
    ARM supports key ITGC controls for user access management, so probably audit would also cover:
    - review of updated processes & controls
    - check (based on sample) if all requests were properly approved
    - review of correctness of approvers assignment
    - verification if what was requested was provisioned
    - timely removal of terminated access
    - review of SoD controls embedded in process
    - periodic review of user access
    and maybe some more controls. In most cases it will be sample based testing so auditors may ask for a sample of requests to trace them to back-end systems and opposite sample of changes in users privileges to verify if proper requests were prepared for those changes...
    Sometimes they could perform more tests on configuration and process, but this is up to particular auditor.
    Best regards, Andrzej

Maybe you are looking for