[request ]Missing modes and others for emacs

Hello.
I finally found some stuff (mainly modes) that can be interesting for emacs users and aren't available al arhlinux packages. Here is a list in hope someone makes a PKGBUILD of them and maintains it.
Of course I'm not going to use all them, but could be useful for others.
http://www.mahalito.net/~harley/elisp/crontab-mode.el
http://www.mahalito.net/~harley/elisp/syslog-mode.el
The author has other stuff at here
http://www.emacswiki.org/emacs/AntMode
http://www.ccs.neu.edu/home/guttman/undoc.el
http://sourceforge.net/projects/post-mode
http://www.emacswiki.org/emacs/imdb-adds-mode.el/
http://www.emacswiki.org/emacs/Htmlize
http://pagesperso-systeme.lip6.fr/Chris … oldingo.el
http://rtfm.etla.org/emacs/htmlfontify/
http://www.emacswiki.org/emacs/FlashCard
http://kanis.fr/hg/lisp/misc/anki.el
http://www.emacswiki.org/emacs/imdb.el
Another irc client yor emacs: http://www.nongnu.org/circe/
http://www.emacswiki.org/emacs/LaterDo
http://www.emacswiki.org/emacs/SCPaste
Be open to give suggestions or better alternatives if those exist.
Regards
Last edited by timofonic (2009-07-21 08:38:36)

i deleted the folder and did a pacman -Sy again. And then did a pacman -S qt and results in
qt: not found in sync db
I use the Server = ftp://ftp.archlinux.org/current/os/i686 for my updates
Do you see the package after you sync?
****I changed the Server to one of the European mirrors. I found it there. I guess qt is not available on the ftp://ftp.archlinux.org/current/os/i686 server ******

Similar Messages

  • •     Re: "MSVCR80.dll Missing" Thanks to mspanner and others for you help. Followed your advice, which worked.

    Re: "MSVCR80.dll Missing" Thanks to mspanner and others for you help. Followed your advice, which worked.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (If this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Miss username and password for access Photosmart 6520

    Miss username and password for altering Security etc by web access to the printer
    This question was solved.
    View Solution.

    I understand now. You are in the Embedded Web Server and can not access the Admin settings. In order to reset the password back to defaults, we will need to restore the Network defaults on the printer, then reconfigure the printer for your wireless network again. You can use the steps below to restore the network defaults on the printer;
     Touch the little wrench (settings) icon you see in the top right hand corner of the printer touch screen.
     Touch the Wireless Menu.
     Navigate to Restore Network Defaults.
    Once restored, go to the Wireless Setup Wizard in the Wireless Menu and reconfigure the settings.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more

    I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more
    Any solution ?
    I'm using iOS 6.1.2 IPad 3
    Regards

    I have also noticed the same "problem".  I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

  • One pricing condition for BOM and other for individual component

    Hello SAP gurus,
    We have two pricing condition types created and assigned in the pricing procedure which has been created with reference to PR00 and condition records are maintained for both the condition types.
    But, we want only one pricing condition type to be triggered in the sales order depending on the usage of material in the sales order. As we are selling the same material individually and as well as a component in a bundle ( BOM).
    i.e, when one pricing condition for BOM component and other for individual component
    What are the configuration steps to be taken care to get this scenario?
    Thanks in advance.
    Regards,
    KB
    Edited by: K.byla on Jan 21, 2010 1:20 PM

    Hi Sagar,
    Thanks for your response.
    Yes, we are maintaining only one material. The same material is used to sell individually and also in a BOM.
    As i have mentioned earlier, whenever the material is sold individually it should pick condition type say 'YR00' and when the same material is sold as a bundle ( BOM) , it should pick condition type " YR01" in same the pricing procedure.
    For both the condition types, the condition records are maintained.
    To give the scenario details,
    A material "X" is sold individually as a single component and the same material is also used for selling bundled with other material "Y" and the bundled material as "Z"
    means, Z=X+Y
    Pricing procedure used is say ZRA000 which contains currently the price cond type YR00.
    Now for the bundle (BOM) involvement i want to use the same pricing pricing proc. and add the new cond YR01 in it so that the system will pick the cond.type YR00 when the material is sold individually and YR01 is taken as the price when the material is sold as a bundle against the item X.
    Need to know the steps for this scenario and do i need to maintain a specific requirement ? please suggest.
    BR,
    KB

  • Multiple HTTP Servers, 1 for HTTP and other for HTTPS

    I am trying to install 9ias 1.0.2.2.2 on 2 machines both running solaris. 1st machine hosts the database (8.1.7.4) and the other hosts the App server (9ias), what i am tryin to achive is have 2 listeneres. One for HTTP traffic and other for HTTPS traffic. Have anyone configured this and could shed some light and enlighten me.
    With all the notes i have read i have understood that i need to basically install 2 instance of Apache in 2 different Oracle Homes. but my question is how can i just have one portal repository. or rather i should say if somebody could guide me from installing the 2 instance of Apache.
    Thanks
    Mir

    You left out Twixl.
    Bob

  • Indesign and other for £19.95 each.... Legit?!?!?!?!

    sorry to bother this forum, but just found a website (
    URL deleted by host) on which you can buy Indesign and other for £19.95 a piece.
    sounds like a fraud and just wanted to check with others whether to trust this kind of thing and how to find out whether it is legitimate or not. Is a bloody good deal!!
    Cheers!
    Rob

    Here's my two cents worth of advice. Pay particular attention to the
    last paragraph.
    http://www.theindesignguy.com/puchase-advice.html
    Bob

  • Cannot update my keynote, pages and numbers from my ipad. I have different accounts, one for app store and other for icloud. What can I do?

    Cannot update my keynote, pages and numbers from my ipad. I have different accounts, one for app store and other for icloud. What can I do?

    You can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
    Use your iCloud ID for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
    Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
    There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

  • Went looking for fun movies to download for my holidays. Found Sixteen Candles and others for £3.99, great! Went to download them this morning on wifi and ***! All movies are now £6.99 each. Total RIP OFF for old movies. Why oh why iTunes? So greedy!

    Went looking for fun movies to download for my holidays. Found Sixteen Candles and others for £3.99, great! Went to download them this morning on wifi and ***! All movies are now £6.99 each. Total RIP OFF for old movies. Why oh why iTunes? Stop being so greedy and make older movies a more reasonable price. I would buy a lot more, it's just false economy in my book. Don't get me started on the difference in price with the US.
    Stop being so greedy iTunes!
    Anyone know how I can get cheaper movies?

    Apple won't read your post here since this is a user to user forum. Provide feedback:
    http://www.apple.com/feedback/ - Apple products feedback links

  • I am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks.

    i am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks. when a peaks get detected it would trigger a pulse of approx 1 sec duration and at the same time it would disable the other peak detector for 1 sec time duration. after the time period, again both the peak detectors would be enabled. i have been able to detect both peaks but still not able to control the detectors block the way mentioned before.
    the code and the data are attached.
    Attachments:
    eog peak detection.vi ‏192 KB

    I'm not suggesting any of this as a model, and your needs are different than mine.
    1) Go to Preferences -> Audio.  Under "Default Audio Tracks", Set "Mono Media: Mono".  Set "Stereo Media: Mono"  (Choices from the pull-down for both are Use File, Mono, Stereo, 5.1, Adaptive)
    You can change these, but I don't. I am using both mono and stereo tracks. I set up a custom sequence with the particular combination of stereo and mono tracks I want.
    2) Set audio for clips by selecting all clips and going to Modify Clip -> Audio Channels Tab.  Under "Number of Audio Tracks" there should be a "1".  Under Channel Format it should read "Stereo".
    I am not sending the audio to anyone else to edit further. I am doing a final stereo mix. If camera one is set up to record 2 mikes as a stereo track, then I leave that unchanged and put it onto a stereo track. If camera two is set up to record one mike onto channel 1 as ambient sound and channel 2 is a mono feed from a sound board, then I modify those clips as Preset Mono, 2 audio tracks, Channel format Mono, and that puts the left source channel (or whichever I choose) onto Audio track 1, channel 1 (of one), and right source channel onto audio track 2, channel 1.
    4) Delete all the existing audio tracks in the sequence and replace them all with mono tracks, so all tracks in the sequence are mono.
    I modify the tracks while creating the sequence, and ultimately use a custom sequence.
    Under my Effects Controls panel there is only Channel Volume, and nowhere to adjust the pan.
    I'm using the mixer, not the effects control panel.

  • "securely" use one ethernet interface for WAN and other for the LAN

    I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
    Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
    I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
    Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
    I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
    I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
    I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
    I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
    It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
    (Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
    Thank you in advance,
    Ion Webster

    First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
    Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
    I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
    As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
    So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
    VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
    (s)FTP
    Calendar publishing
    mail(at a later time)
    Thank you for your help thus far.
    Ion Webster

  • IPod Touch 4th Gen. iOS 5.1.1 - Sleep Mode and Other Questions

    Hello,
    I have an iPod Touch 4th generation with iOS 5.1.1
    1) RE: Sleep Mode - I found this on another thread and it's regarding iOS 4.3.1. 
    Is the same still true for iOS 5.1.1? 
    If so, what is recommended for sleep mode - Airplane mode or Wi-Fi off - or is either one ok?
    Wi-Fi is always ON with the 4th generation model running 4.3.1 when it is sleeping unless you either turn off the Wi-Fi or turn Airplane mode ON.
    2)  I only use my iPod Touch on my home Wi-Fi and do not use any cloud based syncing or iTunes Wi-Fi Sync.  I do all my syncing manually from my MacBook Pro via USB to the iPod Touch.  The way I do things is purchase what I need from my MacBook Pro via iTunes and then manually sync it to the iPod Touch.  But there may be times, in the future, where I would want to purchase directly from the iPod Touch.
    I recently updated my AppleID with my new email address via my MacBook Pro.  But, I noticed that on my iPod Touch under "Settings" "Store" that it still shows my old AppleID.  I have all Automatic Downloads set to OFF.  How do I update the iPod Touch to reflect my new AppleID?
    3) When I'm using Safari and I navigate to several websites, how do I easily get back to my home page (which is set to Yahoo!)?
    Probably a dumb question but I can't seem to figure it out.  I've set Yahoo! to my homepage but I would think there should be or is (and can't find it) a button/icon like on my MacBook Pro Safari to take me directly back to the homepage.
    Thanks in advance for the help!

    - Unless you use bluetooth, airplane mode and wifi off are the same as regards to battery drain. I like use airplane mode sinc that is directly under Settings.
    - Go to Settngs>Store and sign out of existing account and sign in with the updated one
    - I have no idea for the Safari question

  • How to control Color Mode and Resolution for brochure creation?

    Hello guys,
    I am trying to find some settings within Pages, where I could set CMYK color mode and 300 dpi resolution for my pdf file.
    I am creating brochure from scratch, using blank document, because non of brochure templates work for what I need. But I can't find any controls for color mode and resolution set up.
    Is there any solution for this?

    There has been a lot of discussion in the Pages forum about resolution and some on CMYK.
    Much of the discussion has been incorrect.
    For the colour handling there is the colour palette
    The Apple Colour Palette is the user interface for colour managing vector objects created in Apple Pages such as rules and panels and for colour managing one class of vector objects not created in Apple Pages, namely typographic objects.
    Imported objects maintain their colourant model and colour space, if there is one. If there is none, a colour space is assigned and the assigned colour space is saved out into the PDF, opposite e.g. Adobe Photoshop which will colour manage the object in the open editing session, but will then save out the object to disk without the assigned ICC profile if 'Colour Management: Off' is configured.
    Therefore, if the imported object is data space CMYK and the colour space device CMYK, the system will assign the Generic CMYK Profile which is equivalent to ANSI CGATS TR001 colourimetry (US SWOP); if the imported object is data space RGB and the colour space is device RGB, the system will assign the Generic RGB Profile which is equivalent to sRGB colourimetry in OS X 10.5 and higher.
    In general, always capture and then convert for correction in one of two data spaces with three channels, either ICC colour managed RGB or ICC CIELa*b D50. Then convert to CMYK1, CMYK2, CMYK3, CMYKn from the ICC colour space chosen for correction and archiving. This colour space should be large enough to hold any colours that the output colour spaces can hold.
    The Apple ColorSync Utility has a gamut comparison dialogue which is 3D (point, press, and turn the 3D gamut comparison). Use this facility to pick an ICC colour space of reasonable size and shape for correction and conversion into final output. Don't pick sRGB as a quick look will show that it can't hold as input what ISO reference offset can hold as output for pure cyan, let alone hold what a big inkjet can hold in greens, blues, reds and yellows.
    The ICC architecture lets the ICC profile for the printed output match out of gamut colours to in gamut colours using the Perceptual rendering intent, as intended in the original architecture from 1995. Adobe internally introduced an inhouse conversion for compatibility with PostScript and as default for PDF, Relative Colorimetric with Adobe Black Point Compension. Relative Colorimetric is in fact a proofing transform, without gamut mapping. Black Point Compensation is a simple linear scaling of the lightness to compensate for the fact that the shadows will be clipped in a Relative Colorimetric conversion.
    The other problem is transparency, introduced in the QuickDraw Graphics Extension for Mac OS 7.5. Transparency is not supported in any version of Adobe PostScript (level 1, level 2 or level 3). Transparency is also not supported in any version of Adobe PDF prior to version 1.4 and higher. Therefore, unless the RIP Raster Image Processor is able to accept PDF 1.4 and higher, transparency has to be rendered / flattened which is done in the PDF/X-3 filter of the Apple ColorSync Utility.
    The idea in the PDF/X-3 filter (for Adobe PDF 1.3) is that the everyday enduser, after placing ICC colour managed RGB or CIE La*b D50 objects, and after choosing an ICC colour space for objects created in Pages, chooses the ICC colour space for the output condition. The filter accepts both ICC profiles of type MNTR Monitor with data space RGB, ICC profiles of type PRTR Printer with data space RGB, and ICC profiles of type PRTR Printer with data sapce CMYK.
    The colourant conversion (RGB to CMYK) and the gamut mapping (out of gamut colours in input colour spaces mapped to in gamut colours in output colour space) is then calculated as per the ICC profile for the output condition. An output condition is the combination of factors that affect how colour is formed: the colour lightness and colour tint of the paper, the colours of the colourants, and the tone value increase. Think of gamut mapping in a good ICC profile as Format 1 kerning in a TrueType font (where your font has state-based kerning for up to 8 glyphs simultaneously).
    Below a link to a discussion of how to change the default PDF/X-3 filter the Apple ColorSync Utility. "Wegen diverser Fehler im Mac OS X empfiehlt es sich, wo immer möglich, die PDFs ohne Transparenzreduktion (also auf normalem Weg) über den Befehl Als PDF sichern zu erstellen und das Flattening der Druckerei zu überlassen," that is, pick the plain save as PDF path and leave the transparency flattening to the prepress technician.
    Henrik
    Reference:
    http://www.icalamus.net/tutorials/howtocreatepdfx.php

  • How to disappear location request in camera and other apps, how to disappear location request in camera and other apps

    I had turn off location service for some apps and turn off cellular and wifi location for camera too, but when eveytime I turn on camera and other apps it keep appear:
    1. turn on location service for camera for better location
    2. cellular date is turn off for " xxxx apps"
    Press "Setting" or "Done"
    which is very annoying, did anyone have any idea how to fix it/ make the notification disappear?
    thx very much

    There is no way to turn it off at this time. Please submit your feature request to Apple at this link: http://www.apple.com/feedback

  • Problem with recovery mode and restore for disabled ipad2

    Hello, I hope you can help me.
    My ipad2 is disabled.  My only option is to enter recovery mode and then restore. 
    I followed the instructions to connect to my ipad to my computer.  I saw the appropriate restore graphic on my ipad.  Yet iTunes on my computer does not recognize my ipad in recovery mode.  Instead iTunes said it could not access my device because it was disabled.  I have the lastest version of iTunes on my computer.   I believe I have iOS 7 on my ipad.
    I am unable to restore my ipad.
    Any suggestions?
    Thank you!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
     Cheers, Tom

Maybe you are looking for