Request more Experience Manager Templates and Cartridges
Hi all,
are there any more sample templates and cartridges besides the one for wine sample application?
Can anyone provide more ?
Thank you
BCHK
John P and I were able to get these 3 editors working with the sample wine project that comes with Experience Manager Extensions 2.1.2. These should work out of the box.
The snag we hit was that there were multiple PBX versions on the host previously so the Sling JCR had become corrupt with different config files over time/version. If you want to be sure you have a fresh Sling JCR, you can stop the Endeca Tools Service and delete the contents of the Sling directory on disk (On windows this is found in C:\Windows\System32\sling for example. In linux I believe it's found beneath the Workbench directory of ENDECA_TOOLS_CONF/state (I don't have linux version readily available so may be off a directory or two)). When you reinstall the extensions, the correct Sling content should be created.
To ensure you have have wiped away traces of previous PBX config, beyond deleting the Sling directory manually you can delete the cached Tomcat files beneath ENDECA_TOOLS_CONF/work and also be sure to clear your web browser cache. This should get rid of any old cached configurations and allow you to set up Experience Manager Extensions 2.1.2 freshly. This worked for us in getting these 3 editors usable in Experience Manager.
Edited by: Doracle on Mar 22, 2012 11:37 AM
Similar Messages
-
AppleWorks 6.2.9 still quits - request more help from Peggy and Barry
Appleworks6 will not launch
Thanks to Peggy and Barry I am further along in getting AppleWorks 6, release 6.2.9 to work. However, things are still not working.
Peggy, I took your suggestion from my last post (Feb 18-19)about dragging the AppleWorks 6 application from the AppleWorks 6 folder to the Dock. Now when I click once on the AppleWorks 6 icon, the application just bounces once. The menu at the top of the desktop stays on the Finder menu.
Let me give you some more information about the iMac setup, because I followed your suggestions about removing Recent Items files. This did not resolve the problem for getting the AppleWorks 6 application to start.
I have the AppleWorks 6 folder as:
Mac HD>applications>AppleWorks 6
In the Appleworks 6 folder
AppleWorks 6 application
Late-Breaking News folder – 2 items
AppleWorks Essentials folder – 9 items
Clippings folder – 14 items
Starting Points folder – 5 items
AppleWorks 6 Installer log written with TextEdit– dated 12/11/04
On Mac HD/Users/userfile/LibraryPreferences – no file for com.apple.AppleWorks.plist
Under Mac HD>Documents>AppleWorks User Data folder
There are three folders: AutoSave, Starting Points, Clippings
AutoSave folder has zero items
Starting Points folder – has three folders: Cache, Disabled Items, Recent Items
Cache – three folders
Folder 484B1CeC32D183Dba11d8c00b40954
Header.cache dated Dec 21/2004
Templates6-1cwk.gz 0GZIP file
Folder 86B7AA87566C7DBA41B2D8825E0724
Containing header.cache
And newsletter6-1.cwk.gz
Folder D1F3FFE1…
Containing header.cache
and extras6.cwk.gz
Disabled Items folder – containing zero items
Recent Items folder – containing zero items
Clippings folder
Cache folder -0 items
Disabled Items folder – 0 items
Also, on Mac HD>SystemFolder>Preferences>AppleWorks – AppleWorks 6 Button Bars and file called AppleWorks 6 Preferences and AppleWorks 6 Fonts
Should I delete the Mac HD>Documents>AppleWorks User Data\Starting Points folder and the Mac HD>Documents>AppleWorks User Data\Clippings folder? Wouldn’t the AppleWorks 6 application then pick up the correct Starting Points and Clippings folders from Mac HD>applications>Appleworks 6 folder?
Thanks,
BruceDoes AppleWorks launch if you double-click the icon in the Finder? It may be an OS issue rather than an AppleWorks one. So, the first thing I suggest is repairing permissions using Disk Utility. Then, unless you leave your Mac on 24/7 & not asleep, run a utility to run the UNIX cron routines & clean caches. Try a search on MacUpdate or VersionTracker for maintenance utilities such as OnyX or Yasu.
Also, make sure your hard drive isn't too full. It depends on how you use your computer, but for most normal users a minimum of 5 gigs free space at all times after installation is recommended. Power users may need more.
If this still doesn't work, repairing your hard drive with Disk Utility may help. Start up your Mac from the first Panther (10.3.x) install disk. Then, instead of running the installer, go to the Installer menu & choose Disk Utility. Select your hard drive in the left-hand panel & click Repair Disk. When it is done, quit Disk Utility then quit Installer & restart your Mac.
It certainly won't hurt to delete both of the AppleWorks User Data folders. One is for OS 9/Classic & the other, in your documents folder, is for OS X. Actually, there would be one in each user's documents folder if you have more than one user. -
Error while opening supplier/customer forms and payment manager templates
we are having 11.1.0.7 database and 12.1.1 E-business suite with 10.1.2.3 forms
user is getting
Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance.
while accessing supplier/customer forms and payment manager templates and this gets resolved after bouncing the application. the current instance is a staging one and this will be replicated to production so please help or suggest any solution or work around
thanks
pankajThere should be a link on the error page for further details about the error. Can you post the contents of that error link page ?
Pl also check the Apache logs for any errors - see MOS Doc 419839.1 (How to enable Apache, OC4J and OPMN logging in Oracle Applications R12) for name and location of the Apache log files.
HTH
Srini -
Error in installing Experience Manager.
Hi all,
I have installed -
1)MDEX
2)Platform Services
3)CAS
4)Document Converter.
5)Deployment Template.
6)Oracle Endeca Guided Search 2.1.2 for Microsoft Windows x64 (64-bit) V31161-01
Everything is installed in a single local machine.The Endeca Reference Application is running fine also.
But when I am trying to install Experience manager -
Oracle Endeca Experience Manager 2.1.2 for Microsoft Windows x64 (64-bit)-
xmgrworkbench_2.1.2.618087_x86_64pc-win32 -
it is showing the following error.
"All other Workbench installations must be uninstall before installing Workbench.
Please uninstall all other versions of Workbench before running this installer."
My question is -
There is two components in https://edelivery.oracle.com-
a)Oracle Endeca Experience Manager 2.1.2 for Microsoft Windows x64 (64-bit) V31162-01 80M
b)Oracle Endeca Experience Manager Extensions 2.1.2 for Generic Platform V31169-01 71M
Which one I have use to avail the experience manager's functionality (Template creation etcs ).
Or I have to use both the versions ?
What are the components need to be installed to work perfectly with experience manager .?
Regards,
HoqueHi Hoque. I know it is a bit confusing and we are working to simplify things in future releases, but you will want to install
either
Oracle Endeca Guided Search 2.1.2
or
Oracle Endeca Experience Manager 2.1.2
but you do not need both.
Oracle Experience Manager includes Endeca Workbench and the Experience Manager tool and is the option you'll use when the deployment includes a license for Oracle Endeca Experience Manager. The Oracle Endeca Guided Search package includes Endeca Workbench and the Rule Manager tool and will be used for deployments that do not include Experience Manager.
If you're starting a new project, I recommend starting with 3.1 instead. -
Fresh install of Oracle VM Manager Template into Oracle VM Server
Hi,
I am trying to install the Oracle VM Manager template and then
create an Oracle VM Manager client.
I have already done a 'fresh install' of Oracle VM Server.
I do not have another machine available to use to contain the
'Oracle VM Manager', therefore, I am attempting to install the
Oracle VM Manager template directly into an Oracle VM Manager Server and
run the client.
I am following the instructions of the Oracle VM Server Users Guide
in section 4.3.
When I extract the zip file contents into the
/OVS/seed_pool directory, I get the following files.
Deploy_Manager_Template.sh
OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz
So far, so good.
Next, I used 'tar' to help me extract the directories of the .tgz file.
So far, so good.
Next, as instructed, I used 'python' and 'print randomMAC()' to create a new MAC address.
Inside the /OVS/seed_pool/OVM_EL5U3_X86_OVM_MANAGER_PVM/vm.cfg file
I modified the vif MAC address. I replaced the
xx:xx:xx with the 'last three' that were generated by the python randomMAC
function from above.
vif = [ 'mac=00:16:3E:<my generated numbers>', ]
So far, so good?
In the Oracle VM Server Users Guide in section 4.3.,
The next step, expains that I should run
xm create mv.cfg
I did this. When I ran this I received back the error.
Using config file "./vm.cfg"
Error disk is not accessible.
When I peek inside my vm.cfg file.
I see file references starting with the following
file:/OVS/running_pool/ ...
Of, course my running_pool directory is empty.
(Again, this is a fresh install of Oracle VM Server).
My first question is the following.
Sometime in this process was I supposed to run
the the following executable?
./Deploy_Manager_Template.sh
If so, should I have done this early?
Was the modification of the vif (of adding the MAC address
into the vm.cfg file, something I 'should have not done'
or 'something that could be ignored' because the
'./Deploy_Manager_Template.sh' would have done this for me?
My second question is the following.
Would the following process be 'more correct?'
..1 Not modify the vm.cfg' file.
..2 run ./Deploy_Manager_Template.sh.
..3 In the /OVS/running_pool/ directory find my
vm.cfg file of interest, then modify the vif with a new MAC address.
..4 In /OVS/running_pool/Change my current location to my directory of interest
run xm create vm.cfg (to run my Oracle VM Manager)?
Any help or ideas whould be appreciated.
Thank you very much,
AIMHi,
This is the README file for Oracle VM Manager 2.2.0
Readme for Media Pack B57738-01
Print: Access key=P Close: Access key=C
Oracle VM Templates for Oracle VM Manager 2.2.0 Media Pack v1 for x86 (32 bit)
=====================================================================
Template Version 2.3
Oracle VM Manager Version 2.2.0
This document contains:
1. Prerequisites for Oracle VM Manager virtual machine (VM) deployment
2. Oracle VM Manager Template description
3. Creating an Oracle VM Manager Virtual Machine from
Oracle VM Manager Template
4. Deployment Interview
5. Known Issues
For more information on Oracle VM Manager, please refer to
the "Oracle VM Manager Installation Guide" and the "Oracle VM Manager
User's Guide" available at:
http://download.oracle.com/docs/cd/E15458_01/index.htm
1. Prerequisites
================
- A new install of Oracle VM Server 2.2 that has NOT been managed by another
Oracle VM Manager. Manager Template 2.2 is intended to be installed on Oracle
VM 2.2 server. If you have a new Oracle VM 2.1.5 server and want to deploy
Oracle VM Manager template, please use the Oracle VM 2.1.5 Manager template.
Note: root access to the server's dom0 is required.
- It's highly recommended that you upgrade the default agent (ovs-agent-2.3-19)
to ovs-agent-2.3-27 or later. You can get the latest Oracle VM 2.2 packages
from Oracle's Unbreakable Linux Network (http://linux.oracle.com).
Note: Alternate location to get Oracle VM agent 2.3-27 is
http://oss.oracle.com/oraclevm/server/2.2/RPMS/ovs-agent-2.3-27.noarch.rpm
- A working directory of the Oracle VM Server 2.2 has at least 4GB free space
for downloading and installing the template. The working directory can be any
directory on the Oracle VM server except /OVS/running_pool.
Note: The /root partition of the default Oracle VM server install may not have
enough space to temporarily host the template installation. Please use other
directory that has sufficient free space.
- At least 15GB of free space in the cluster root storage repository. For storage
and repository configuration, please refer to Oracle VM 2.2 Server User Guide:
http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/storage.htm
and
http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/repository.htm
- At least 2GB of free memory on the Oracle VM Server
- A static IP address for the Oracle VM Manager
- If enabling HA (high availability) for the Oracle VM Manager,
mount a clustered OCFS2 or NFS filesystem on /OVS. If ext3 or a
local OCFS2 filesystem is used, enabling HA will cause the high availability
prerequisite checking to fail. The Oracle VM Manager configuration
process will exit without completing the configuration.
- The Oracle VM Manager will register the first VM that it detects.
To have Oracle VM Manager be the first VM registered,
make sure there are no virtual machine images besides the Oracle VM Manager
virtual machine in the /OVS/running_pool directory on the Oracle VM Server.
- A desktop or other system with a VNC Viewer installed
The steps below assume that the Oracle VM Server used is not currently
or was not previously managed by another Oracle VM Manager. If this is not
the case, the instructions below will ask user clean up Oracle VM Agent DB
before running the Oracle VM Manager.
2. Oracle VM Manager Template Description
=========================================
The Oracle VM Manager Template is distributed as one archive file which
includes:
File Version
OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz 2.3
Deploy_Manager_Template.sh 2.3
The OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz archive contains two disk images,
a VM configuration file and a readme file:
- Oracle Enterprise Linux 5.3 x86 system disk image
- Oracle VM Manager 2.2 disk image
- vm.cfg
- README
The system image is a JeOS (Just enough OS) installation of Oracle
Enterprise Linux 5.3. It is a smaller footprint install that contains
the only packages needed by Oracle VM Manager.
Oracle VM Manager is configured to use Oracle Database 10g
Express Edition (included).
Deploy_Manager_Template.sh is used to check the prerequisite and
create virtual machine.
During the first boot of the Oracle VM Manager virtual machine,
the Oracle VM Manager configuration process will create server pool
and import the Oracle VM Manager virtual machine.
Two OS user accounts are created by default:
user: root password: ovsroot
user: oracle password: oracle
The user 'oracle' belongs to the 'oinstall' and 'dba' groups.
The default vnc console password is 'oracle'
3. Creating the Oracle VM Manager virtual machine
=================================================
1) Download the Oracle VM Manager Template (V19215-01.zip)
from http://edelivery.oracle.com/oraclevm
2) Login to the Oracle VM Server's dom0 as 'root'
Copy V19215-01.zip to your working directory with at least 4GB free space.
You can choose any directory on OVM Server except /OVS/running_pool.
This zip file contains the archive file OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz
and a deploy script Deploy_Manager_Template.sh
3) As root, run
# unzip V19215-01.zip
4) As 'root', run the deployment script:
# chmod 755 Deploy_Manager_Template.sh
# ./Deploy_Manager_Template.sh
The deployment script Deploy_Manager_Template.sh will complete the following
tasks:
a) prerequisite checking
b) uncompress OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz file to directory
/OVS/running_pool. This directory will contain the files following files:
/OVS/running_pool/OVM_EL5U3_X86_OVM_MANAGER_PVM
|- System.img (OS image file)
|- Manager.img (Manager image file)
|- vm.cfg (VM configuration file)
|- README (Readme file)
c) generate and assign new MAC address to the virtual machine
d) interview the user for VM and VM Manager configuration parameters
(next section 'Deployment interview' provides the list of questions)
e) create and boot the virtual machine from the Oracle VM Server
command line
f) display the access information for Oracle VM Manager and Oracle VM
Manager VM
4. Deployment Interview
=======================
The deployment script will prompt a user to enter
a) Agent password
The agent password is required for the prerequisites check.
b) Storage configuration
Storage Source: NFS address, OCFS2 partition path
The script will automatically detect your cluster root storage repository
if you have configured it. Or it prompts users to input their storage source
and the script tries to set it up as cluster root.
NOTE: how to manually create your own storage repository in OracleVM server 2.2.x
1) Register your storage source. Example:
/opt/ovs-agent-2.3/utils/repos.py -n myhost:/mynfslocation
/opt/ovs-agent-2.3/utils/repos.py -n /dev/sdb3
Note that the storage source should have at least 15GB free space.
If the storage source is successfully registered, note down the uuid genereated
by the command above, such as:
51d4c69b-e439-41ac-8b31-3cc485c993b0 => /dev/sdb3
2) Mount your storage repository.
If the agent version is 2.3-27 or higher, execute:
/opt/ovs-agent-2.3/utils/repos.py -i
otherwise, complete the following commands:
[1] mkdir -p /var/ovs/mount/$(echo <uuid> | sed s/-//g | tr '[:lower:]' \
'[:upper:]')"
where '<uuid>' is the uuid noted down in step 2)
[2] mount your storage source to the directory made in step [1].
3) If /OVS exists, delete or move /OVS
mv /OVS "/OVS.$(date '+%Y%m%d-%H%M%S').orig"
create a symbolic link from storage repository to /OVS
ln -nsf /var/ovs/mount/<UUID>/ /OVS
c) Network configuration
Static IP address
Netmask
Default Gateway IP address
DNS Server IP address
Hostname
d) Password for database accounts:
'SYS' and 'SYSTEM' (the same password the same password is used)
'OVS'
'oc4jadmin'
'admin'
e) Web Service configuration (supported in template in version 1.2)
Web Service password (at least 6 characters)
Enable HTTPS or not
f) SMTP server (outgoing mail server SMTP hostname)
E-mail Address for account 'admin'
g) Data for the manager services configuration:
Oracle VM Server Pool Name
Oracle VM Server login user name
Oracle VM Server login password
Note that Oracle VM Manager is critical for managing Oracle VM Server Pools.
Do not pause, suspend or shutdown this virtual machine! Configuring
HA is recommended for this virtual machine so that Oracle VM will
automatically restart the Oracle VM Manager virtual machine if there
is a server crash.
5. Known Issues
===============
1) You may see messages on a virtual machine's console similar to these
when the virtual machine is booting up:
Fatal: No PCI config space access function found
rtc: IRQ 8 is not free.
i8042.c: No controller found.
These messages can be ignored.
2) Mail server check fails.
Bug #7140 in bugzilla.oracle.com
Oracle VM Manager installer only checks the default SMTP port 25 for the
mail server. If the SMTP port is not 25, the check fails, and you will
see the following message:
Mail server '<mail server hostname>' check failed, want to re-enter it(Y|n)?
You can enter 'n' to skip the mail server checking. You will also see the
send mail checking fails with following message:
Failed to send mail to '<Admin e-mail address>'
want to re-enter the e-mail address(Y|n)?
You can enter 'n' to skip the send mail checking.
3) OEL VM console may display error messages similar to those below:
BUG: warning at drivers/xen/fbfront/xenfb.c:143/xenfb_update_screen() (Not
tainted)
Call Trace:
[<ffffffff803aa461>] xenfb_thread+0x135/0x2c5
[<ffffffff8024874b>] try_to_wake_up+0x365/0x376
[<ffffffff8029ba6e>] autoremove_wake_function+0x0/0x2e
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff803aa32c>] xenfb_thread+0x0/0x2c5
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff802339c8>] kthread+0xfe/0x132
[<ffffffff80260b24>] child_rip+0xa/0x12
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff802338ca>] kthread+0x0/0x132
[<ffffffff80260b1a>] child_rip+0x0/0x12
This will not cause any problems.
4) If you accidentally power off Oracle VM Manager virtual machine through
Oracle Manager UI, and restart the virtual machine from OVM server command
line, although Oracle VM Manager virtual machine is running normally,
the virtual machine status in Manager UI will stay in 'Shutting Down'.
This is expected, as the virtual machine status sync will only happen when
the virtual machine status is "Error" or "Powered Off".
To re-sync the virtual machine status, please complete the following steps:
1. Log on the Manager UI;
2. Navigate to the 'Virtual Machines' tab;
3. Select Oracle VM Manager virtual machine, "OVM_EL5U3_X86_OVM_MANAGER_PVM";
4. Choose 'Reset' from 'More Actions' dropdown list;
5. Click 'Go' button, the status will become "Running" after a while.
5) (Bug 9191053) For OVS agent version 2.3-19, the following High
Availability scenario will not work.
"If a Virtual Machine Server fails, all running virtual machines are
restarted automatically on another available Virtual Machine Server."
For OVS agent 2.3-19, Oracle VM Manager virtual machine will not be
automatically restarted on any other available Virtual Machine Server,
but on the original Virtual Machine Server when it becomes available again.
To fix the issue, please upgrade OVS agent to 2.3-27 or the latest version. -
How to use single sign-on for BCC and Experience Manager
Does anyone have experience in implementing single-sign-on for BCC and Endeca Experience manager for business users.
With the older versions of Endeca commerce stack there is no OOTB support for this. However with Oracle Commerce 11, SSO with BCC and Experience Manager are out of the box. Oracle Commerce 11 is released today.
-
Can't add a goods-issue with more than one item and one is serial managed.
Hi,
We are trying to issue more than one item to a production order using the DI API. If none of the items is serial managed, they all are accepted and the goods-issue Add is successful. If one the items is batch-managed, the goods-issue Add is also successful. I am able to add the goods-receipt if I it contains only one item and it is serial-number managed. However, if Im issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue. The error message that appears refers to an item that is not among the items being issued. The message is:
-10: (IGE1.WhsCode)(line: 3), Item A00006 with system serial 1 is not in stock.
Again item A00006 is not even in the group of items being issued.
The code I am using for the serial number part is:
With oGoodsIssue.Lines.SerialNumbers
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
.Add()
rs.MoveNext()
n += 1
End With
The rs is a recordset that the code is looping through as the serial numbers are being added.
The error message does not occur during this code. It occurs when it tries to add the full goods-receipt. Does anyone have any idea how I can fix this?
Thanks,
Mike
Edited by: Mike Angelastro on Mar 31, 2008 8:43 AMHi Mike,
Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
I guess your n variable start at 1 or 0, so you could put code like this :
With oGoodsIssue.Lines.SerialNumbers
if n = 0 then (or 1, also I don't the correct syntax of your programming language)
.Add()
end if
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
rs.MoveNext()
n += 1
End With
HTH
Jodérick -
Manage music and videos manually from more than one computer
Hello,
I'm triying to transfer music from two computers (work computer and home computer) to my iPhone. The problem is that when I select the Manage music and videos manually on my iTunes and then apply it keep saying that the iPhone is already synchronized with another computer and if I accept I lose all the media (video and music) on my iPhone. I just want to add new videos and new music manually without losing the existing ones, is it possible?.
I'm using the iPhone 3G with iTunes 7.7 (last version) and Windows Vista.
Thank youThen it is not possible to add new music files or video files to my iPhone from more that one computer without losing the ones I already transfered from another computer. This is a pitty
Thank you very much -
"Manually manage music and videos" takes up more space than syncing?
Hello all,
I fear that I am just stupid and unseeing an obvious answer to this query, but ask I shall, because it is frustrating me to no end.
I recently downloaded a few audiobooks from my local library to listen to on my iPod Touch; the app in question requires that you "manually manage music and videos" rather than syncing. Fine.
I switch over to iTunes, check the box, and now my music--without changing anything, mind--is now taking up an additional 1.8 (or more) gigs on my iPod. I toggle the option to "manually manage" on and off, and with it "on", my music takes up more space than with it "off", even though it's the same music, same podcasts.
Can someone please explain to me why syncing manually takes up more space than syncing automatically and where the extra gigs are coming from? There's not that much audio on my iPod--1.52 gb of music, 1.97 gb of podcasts and .69 gb of apps--which only adds up to 4.18 gb, and on an 8g touch, should leave me with about 4 gb of "wiggle room", so to speak, rather than .27 gb.
Help, please!iTunes will normally put just one copy of each file on the iPod and link it to multiple playlists. If your iPod's database has been corrupted at some point however, there may be unattached copies of your meadia from earlier sync attempts, taking up space on the drive, but not visible in the library. How much space does iTunes report for Other? Excluding files placed manually & intentionally on the iPod, "other" is typically an overhead of 1%-2% of the size of the media and represents the iPod database, artwork, games etc. If you have significantly larger amounts of "other" then you will need to restore your iPod in order to reclaim the space.
tt2 -
IOS 7.0.3 will not correctly "manually manage music and videos" any more?
So, on all my iOS devices, I have always used "Manually manage music and videos" to drag albums from my iTunes library to my iPhones.
I then use iTunes to delete the albums and replace them with others (I have a lot of music).
With the iOS 7.0.3 update -- if I delete songs on the phone in iTunes 11.1.2 -- they show (in iTunes) that they have been deleted.
However, the songs are still on the iPhone when I go back to the Music app.
Is anybody else seeing this? I filed this (as it wasn't an issue with 7.0, 7.0.1 or 7.0.2), but am wondering if I'm missing something terribly obvious all of a sudden...
My only options at this point are to manually delete songs on the phone individually or to delete *all* the songs from Settings -- neither of which is optimal.
I filed a bug on this, but wondered if anybody else ran across this and figured out how to fix it?It looks as though I MAY have found a solution after playing with this since last night ... Let me know if it works for you!
I went through and deleted a few random songs through iTunes on the "On This iPhone" tab ... they still showed on my iPhone but not in the Music part on iTunes. I then clicked sync at the bottom next to the memory bar on iTunes and it seemed to have removed the songs from my iPhone.
However, my iPhone is saying I have 1 more song than my iTunes is saying which I still don't understand but if I can still manually manage my music I guess it's a small price to pay for the minor confusion.
Really getting tired of becoming a detective just to work my phone appropriately. Apple should really stop making all these changes and stick to what the customers know and like. Frustrated and annoyed customers won't raise their sales... -
I have created a java app and deployed in ToolsAndFramework of endeca and since that app can be accessed through a directl url so want to implement an security filter which will use the same user validation as is used in experience manager.
Sorry to hear that, but this forum is for us, users, and what you need is someone from Xperia Care to find your motherboard and send it back, I don't think it'll be possible to retrieve any data from a broken motherboard.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Hello,
Is there a limit to the number of cartridges that can be used while designing a page using Experience manager? As per Oracle documentation, the number of cartridges does affect the performance of the Endeca query? Is there an average number that everyone uses?
-SSHello,
Is there a limit to the number of cartridges that can be used while designing a page using Experience manager? As per Oracle documentation, the number of cartridges does affect the performance of the Endeca query? Is there an average number that everyone uses?
-SS -
If I go to "manage storage" and get more storage. Is it the same as normal gigabytes?
If I go to "manage storage" and get more storage. Is it the same as normal gigabytes?
Purchasing more Storage on iCloud will not increase the Storage Capacity of your iDevice.
-
Manually managing music and videos on more then one computer
When i go on itunes and try put my iphone 4 to manuely manage music and videos, On a different computer to the one i have origenly sycned it to, it erases all of the music and videos i have already put on it. I was wondering if it happens with all iphone 4's or if it was just a fault with mine.
Thanks,
MatthewIt is very basic to always have a backup copy of your computer ( music/pics/docs/files/etc).
You would simply use your backup copy or your original computer to move everything to the new computer. -
Link: http://www.businesscatalyst.com/_blog/BC_Blog/post/May-release-New-partner-support-Infrast ructure-updates-Site-templates-and_bug-fixes/
We are announcing a new Business Catalyst release, scheduled to go live on Thursday, May 3rd. With this release, we are continuing our investments in system performance and stability by increasing our web servers capacity, enabling HTTP acceleration to provide faster site loading times, and improving the site creation speed by using pre-generated sites.
On the product side, we have completely revamped our partner support workflow taking advantage of the Adobe support infrastructure and tools, enhanced the site templates workflow for partners, and included lots of bug fixes and improvements. Read through the following sections to get detailed information about this release:
Partner support
Infrastructure updates
Features and enhancements
Issues fixed by this release
What's next
You can jump to the corresponding section by clicking the above links.
Partner support
Updated Help & Support partner experience
Following Adobe ID support, we have upgraded BC support tools (cases, chat, documentation) with standard Adobe tools. As a partner, you can now benefit from the same support tools as the rest of Adobe Creative Suite, and can track your support cases with Adobe BC, Dreamweaver, Muse or Photoshop in a single place.
Partners with more than 100 paid sites will get 2nd level chat support, which includes a higher priority, by default. If you have more than 100 paid sites, but spread across different Partner Portals, please ask support to enable 2nd level chat for you.
Support experience for your Small Business owner clients can now be owned by partners (see below).
Custom Help & Support URL for your clients
As a partner, you are probably already offering various additional services to your clients besides building & maintaining their BC site. Support, tailored specifically to your client needs, is usually one of these value-added services. We are now enabling you to take your Support service to the next level. In Partner Portal Settings, you have the option to set a custom URL for what will open when your client clicks on Help & Support inside Admin Console:
If you have multiple partner accounts, for different verticals, you can specify a Support URL for each of these.
The default Support experience provided by BC for your clients will be updated in a few releases to be similar to the partner support experience. This includes BC-branded support cases and documentation. If you'd like to keep a white-label experience for your customers, please set your own Help & Support URL in Partner Portal.
For more details please read the Improved support workflow and new forums announcement on our blog.
Infrastructure updates
Between our April release and the following infrastructure updates have been enabled
Limited trial sites for free partners – starting with our May release, the number of trial sites a Free Partner can have will be limited to 100. Once the limit is reached, Free Partners that need to create a new trial site have the options to upgrade to a higher partner plan, upgrade some of the trial sites to paid or delete unused/expired trials.
Automatic trial expiry extension - with this release, trial site expiry date will be automatically extended with 30 days every time an admin user logs in the system through the admin interface or through FTP.
Installed additional hardware - we have installed additional web servers on all our data centers, that translate into an increase of the existing capacity with over 70%.
Updated DNS infrastructure - we have improved the DNS resolution for email delivery so that we can increase the rate at which we're sending the system operational emails
HTTP acceleration – all sites static assets are served from a new cache engine (images, CSS and JavaScript files, together with improved headers that should allow the browser to cache them better for a browsing session). This update has been turned on along with our April release, and has made all the BC sites load faster on first and on subsequent loads.
Accelerated site/partner creation – we've changed the way new sites are created for faster speed, pre-creating them and reusing pre-created sites when needed, and have also improved the creation process for new partners, minimizing the impact of new CCM customers on the existing datacenters.
Adobe ID for partners - in order to support an integrating experience between the various Adobe tools a partner may use (Dreamweaver, Muse, Support forums) we have added Adobe ID support for Business Catalyst partner accounts. Starting April 19, partners are asked to merge their current Business Catalyst account with their Adobe ID accounts. For more details about the transition process and FAQ please read the Introducing Adobe ID blog post.
Updated Terms of Use - Along with several other changes in our processes in the past few months, we also revamped our Terms of Use and the signature process by requesting every admin user to sign a TOU. We have completed the rollout for partners, and we might be pushing an updated partner Terms of Use version within the following weeks. For more details and questions about this change, read the New Terms of Use for Business Catalyst blog post.
Features and enhancements
Site templates
To support the increasing number of partners building, sharing or reusing templates to create new sites, we're extending our site templates support from our partner portal with a new template type and improved management support. The update is going to enable partners to mark sites as templates and choose between making them available in Online Business Builder and keeping them private in their partner portal. A template site will not expire and has the same limits as any other trial site.
Based on your partner level, you can create private or public templates using the Site Details screen or the Tools>My Site Template section from your Partner Portal. Standard partners can only create private templates, while Free Partners can only view site templates that have been transferred to their accounts by other partners.
The number of templates a partner will have will be limited and will vary based on partner level: free partners can store up to 5 templates in their partner portal, standard partners have up to 100 site templates while Premium Partners might have up to 200 templates. Paid sites marked as templates are not counted against these limits.
Business Catalyst Partner fixes
While we are really focused on making the Business Catalyst integration into Creative Cloud a smashing success, we are slowly resuming our efforts to deliver fixes that have been requested by our partners. This release includes the following partner fixes:
Improved product custom fields - we have increased the maximum number of characters for product custom fields to 1024 (previous limit was 256); this gives partners and customers additional space to use when working with products
Improved Secure Zone subscribers list - we have added the customer email address in the Secure Zone Subscribers list to enable partners better filter and manage customers
Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
Social plugins integration updates
Starting with our May release, we are updating the social plugins support to require users to get the plugin code from the third party provider and saving into his Business Catalyst website. The module tags and configuration will remain unchanged, but will render an empty tag until the partner or site owner will update the module template to include the corresponding module code snippet from the third party platform provider.
For more information about how you can enable the Social Plugins on a Business Catalyst websites, read the Social Media: Integrating Facebook and Twitter knowledge base article.
Other changes
Updated weekly emails - Starting with our May release, the information in the site weekly emails has been filtered based on the site's plan. For example, webBasics site reports will no longer include the sales report.
Localization - we improved and increased the coverage of the admin interface translations into German, French and Japanese
Site Settings -> Ignored IP addresses has been relocated under Reports -> Visitors -> More.
BC-Dreamweaver integration performance improvements
Development Dashboard has been removed, as it didn't provide a clear useful, ongoing benefit. The information present in the development dashboard has been integrated into our new Help & Support section.
Payment gateway settings - for more privacy and data protection, we have updated the Payment Gateway configuration screens to obfuscate the sensitive login information. Fields that have been obfuscated are now requiring confirmation.
Report abuse badge on trial sites - for compliance reasons, a "Report Abuse" link has been added to the front-end of all trial sites of free partners that don't have any paid sites. When they click the Report Abuse link, site visitors are redirected to a form submission page on businesscatalyst.com site.
Issues fixed by May release
Issues 3051303, 3168786 - Workflow notifications - Fixed a problem preventing workflow notifications emails from being sent.(see get satisfaction forum discussion)
Issue 3164074 - Fixed a bug causing the lightbox gallery created from Muse to be displayed behind page elements
Issue 3162810 - Fixed a bug in rendering engine to prevent content placed between body and head tags being incorrectly moved inside the body tag
Issue 3166610 - Fixed a broken link to Partner Portal in Internet Explorer
Issue 3175003 - Fixed an issue that caused an incorrect price display for the Year One-Off Setup Fee when upgrading a site from Admin using CB
Issue 2567278 - Fixed a bug causing site replication to ignore product attributes
Issue 2947989 - CRM passwords are now case sensitive
Issue 2723731 - Removed CSS files from the head section of the Layouts files, when downloaded and opened in Dreamweaver, via the BC extension
Business Catalyst new admin interface updates
Added "Save and Add New" button in Web App Item Add & Edit screens (see get satisfaction forum discussion)
Updated Quick Actions menus to add more actions (see get satisfaction forum discussion)
Fixed an issue causing Recent items menu to display deleted items (see get satisfaction forum discussion)
Fixed a display issue on File Manager making top buttons unreachable (see get satisfaction forum discussion)
Fixed the scrollbars in Email Marketing>Campaign>Stats>Bounced Emails reports (see get satisfaction forum discussion)
Fixed an issue causing Recent items menu to brake after selecting the current page from the Recent Items menu (see get satisfaction forum discussion)
Replaced the Success notification displayed when selecting Users or Permissions tabs from User Roles with an Warning
Change the action label displayed in User Roles list from View to Edit to match the list pattern from Admin Users
Fixed a missing file JavaScript error occurring when trying to open image manager from product details-> Attributes -> options
Moved System Emails section from Site Setting to Site Manager (see get satisfaction forum discussion)
Updated Domain Management interfaces to close the modal window and refresh the domain list after successfully adding a domain
Fixed an issue preventing the Hyperlink Manager to function properly (see get satisfaction forum discussion)
Updated the confirmation message received after copying a page to match the new workflow and button names
Fixed an issue causing the current screen or section to not be highlighted in the menu
Updated styling on the new dashboard, user management and email accounts interfaces
Updated dashboard reports filters and chart display; made the chart and the filter use the site time zone
Fixed an issue preventing users from inviting new admin users or create new email accounts on Internet Explorer 8
Fixed an issue preventing users from deleting Email Accounts or Admin Users in Internet Explorer 8
Fixed some issues preventing password recovery email from being sent
Removed the alert message displayed when the user or email account limit has been reached
Added localization for the simplified dashboard
Fixed display issues for site limits, domains and user list in the simplified dashboard
Added Custom reports for webBasics plan
Fixed a bug generating a "500:Collection error" on the simplified dashboard when user did not had View users permission
Added TOU checkbox in the email account setup screen
Updated Site Preview link in the dashboard to load the default domain
Fixed an issue in the new File Manager forcing a user to press Undo twice in order to see the change take effect if the code that was previously formatted contained any <"tag" with more than 2 lines
Fixed an issue causing the File Manager editor toolbar to incorrectly render if page URL path is longer than certain value; starting with this release, the site URL is trimmed
Fixed an issue causing the invite users to be displayed as [object Object] in dashboard and admin user list
Fixed a bug in the new admin causing the interface to become unresponsive when using the browser Back button
Fixed an issue in the new File Manager causing "Save Draft" button to publish the default page template instead of creating a draft version
Fixed a broken invite link issue in the Email Account invite email
Updated loading indicators in File Manager and Email Accounts screens
What's next
The first item on the what's next list might not be news for many of you, but it's definitely one of the most important milestones this year. The Creative Cloud launch is just around the corner, and Business Catalyst is playing an important role in that, as the publishing platform for Adobe® Muse and Dreamweaver. This launch will capture all our attention within the next weeks as we want it to be our best ever.
We'll start our next development cycle on May 15th, while the next Business Catalyst release is going to be pushed live in mid June. That being said, the following items are already on our launch plan for the next release and a few more will join the list. Please expect an update on our 2012 plans around mid May.
HTTP throttling – all page load and API calls to BC will be protected against attacks, this might trigger problems for API heavy sites. We are looking into enabling this update along with our June release, and will help make sure that a reasonable number of requests will be accepted from the same computer per minute.
Automatic site deletion - Starting with the June release, we are going to start automatically delete expired trial sites and canceled sites. Customers will be notified twice before we are going to proceed with deleting the sites.
Thank you,
Cristinel Anastasoaie
Adobe Business Catalyst Product ManagerIn reference to this change in the Custom Reports... Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
What is the customer confusion we are trying to stop here? I've got even more confused customers at the moment because all of a sudden they can't find the export to excel option but know it exists if they log in on a PC?
Mark
Maybe you are looking for
-
How do i remove a user and make myself the main user?
I originally bought this MacBook Pro for me and my boyfriend. He entered in all of his information into the computer and now I am the only user of the Mac but i can't figure out how to stop getting all of the notifications for his facebook and twitte
-
Long text problem in BW query and Key figure name
Hello We're using SAP BO 4.0 (IDT) and SAP BW as a datasource. Maybe someone knows: 1. How to change the name of keyfigure, which now appears as Formula 1, Formula 2 etc. In BW every single key figure has it's own name Sales, Purchases etc. What I'm
-
When i open music player it always starts with the albums and i have to select songs all the time to show me all the songs. How do i do to make songs list open instead of albums everytime when i open the player?
-
I know about the alert msgbox. But, In my jsp, I want to display a Message Box with OK and Cancel Button and based on the selection of the button, I want to take different actions.
-
Adjusting margins between horizontal menu items
I noticed you can adjust the padding with menu items, but not the margins? Is there a way to adjust the margins between each menu item ?