Request No: generated in production

Hi Experts,
     If the user makes any  changes in the master data (production server) its asking for a new request.
This problem is faced while changing a name in HR MASTER DATA. This shouldnt happen, pls advice me
what need to be done.
Regards,
Sharmila.S

HI,
The problem is with BASIS Side.
Ask BASIS guys to make settings in SCC4 T.Code for Automatic changes without request,
Regds,
Anil

Similar Messages

  • Spool file not being generated in production server

    Hello
    Our end users are using automatic payment program F110 to print multiple cheques.
    The settings in SPAD are identical in Quality and Production Server,but some how
    spool file is not being generated in production.
    Test printing is fine in Quality server.
    Printer being used is Epson LQ 300.Device type is EPESCP2.
    We are using z custom page size ,and it is assigned to printer device Type as well
    Would be very great if some can can comment on which settings to check,as SPAD setting is
    same in both server ,yet no spool.Very Very urgent.
    Iam not sure ,whose domain is it now-BASIS or ABAP.
    Thanks a lot
    Nouman

    If there is a problem with the spool, the variant that is being in F110 parameters.
    As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
    This should solve your situation.

  • No request Idoc generated in BI

    Hi Experts,
    I'm trying to load transaction data into infoprovider but it's not getting through when i check in Moniters it's shows 'No request Idoc generated in BI'.
    To resolve this issue then load data, what are the things need to be done.
    Please drop your comments.
    Thanks in advance.
    Siri

    Hello Siri ,
              what is the source of the data flat file ,R/3 ?can you check whether data is reaching to PSA?is there any routine between?what you can do is go to the monitor click on the details and then go to the data package and simulate the data .then you will know where you got the problem.
    Assigng Points  = Thanks in SDN
    Thankyou & Regards
         Jai

  • Spooling request not generated

    hi gurus
    i am facing a problem in po output, for my one document type spool request is not generated but for other document type spool request is generated . But i can do it maunally for same document type please help me in this issue ..
    regards
    Edited by: usmfarhan on Dec 16, 2008 12:53 PM

    Hi
    Tcode MN05 u2013 KEYcombinatin u2013 F8 u2013 communication Select print immediately
    Switch for printing immediately. Printing is immediate if this switch is set. Otherwise the output is held in the spool.
    Raju

  • While doing changes in GRR2 no transport request is generated( report paint

    Hi Gurus,
            when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
                  Trial balance......... liabilities          from               to
                                                                 100000           199999 (allready existing)
                                                                  600000           690000 (new range while doing this,not generated transport request)
    please do needful,
    Regards,
    Rmesh.

    Hi,
    Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
    Regards,
    Eli

  • Is any request number generates when i create a sap script??

    hi Gurus
    I want to know Is any request number generates when i create a sap script??
    if it is generates then how to find that request number???

    Hello,
    A simple solution to find out the request number if thisis not released is, logon to SAP system with diffrent user ID other then the request owner's ID, a pop up message appears informing whether to create a new task under the xisting TR number.
    If the TR i already released, then go to table E071 table and pass the object name. you can find all the related Tr's for the object.

  • Which one request not generated in configuration

    hi
    plz tell in configuration which one request not generated and which one will create work bench request.
    plz tell me list
    thank u
    sowmya

    Hi,
    The answer is ambiguous: sometimes it really depends on the specific attributes of SAP objects. Generally, any direct intervention to SAP data tables and programs will create WB  change request.
    Regards,
    Eli

  • How to tell which country a URL request is generated?

    Hi,
    We need to know the geographical location of a user at least the country information for our application. I learn the country where a URL request is generated can be detected. A package, called CountryHawk, on Jason Hunter's Servlet.com site demonstrated the function. Can someone teld me how it is implemented.
    Thanks in adnvance.
    v.

    What I find is where the country of my internet connection provider's location address.Yes, that is what you will get.
    I try the ip2country.com site. They get the country right, but not anything more, that is to say the site doesn't have my province/state right.Yes, that is true also. The IP addresses are given out to the Internet Service Providers in a controlled way, which is why those databases can be created. But the ISPs are free to give out their assigned blocks of IP addresses in any way they choose, and the people who make those IP-to-country database have not yet interviewed the many thousands of ISPs to see exactly how they did it. And I don't expect anybody will be doing that anytime soon.

  • JoinFieldValue between Special Pricing Request and Special Pricing Product

    Hi,
    Can anyone please let me know if I want to Copy the Value of a Field in Special Pricing Product to a field in Special Pricing Request, is it possible? Does Join Field Value works between Special Pricing Requests and Special Pricing Products?
    Example: In the Special Pricing Product, the External ID field is populated with the Value: AAPA-5WZD64 I want to copy this value to the External ID field in Special Pricing Request. Can this be done in any way, apart from web services?
    Thanks

    Hi Bob,
    I have seen the thread.
    Even though the SPR (Special Pricing Request) and SPP (Special Pricing Product) are the PRM Objects, in my case, the vanilla Object Partner is of least significance, in terms of the existance of a JoinFieldValue function between SPR and SPP.
    Since this is not in the help file and also in Metalink/MOS, Can you please let me know if there is any way by which I can copy the value of a Field (External ID) in SPP to a corresponding Field (External ID) in SPR.
    Thanks.

  • Error while transfer request from development to production server

    Hi,
    We have generated some request on development and while transer the same on production server, following error message appear "Transport control programe tp ended with error code 0247"
    Pl give us the solution.
    Regards
    Suresh

    hi
    repeat your transport run
    or re-create transport and execute again.

  • Issue in Importing request from Quality to Production

    Hi Experts,
    I have a request which is successfully imported to ECC Quality system. I have collected the 'Customer Exits, Functional Module, Function Groups' in this request. I am  getting the following error when I try to open the Function module in se37 in the Production system after the Import Process.
    Function group ZRSAX contains errors
    So, Kindly help me resolve this issue.
    Thanks in advance !!!!
    Regards,
    Gokulkumar RD

    Hi Gokulkumar,
    This message is FL(023).
    Please  try to open the include report "zrsaxuxx" in tr-code SE38.
    After translated by Google:
    * Not for external call, for example, by rsfufill ...
    * Not even when you delete, because the bodies have gone
    * There is intercepted outside
    * Error in UXX how shall he completed while generating
    For German
    *   Nicht beim externen Aufruf z.B. durch rsfufill...
    *   Auch nicht beim Löschen, da müssen die Leichen weg
    *   Dort wird außerhalb abgefangen
    *   Fehler im UXX wie soll er beim Generieren abge
    Hope it is helpful to you.
    Regards

  • Request: Hide generated color definitions

    I'm updating FrameMaker templates to reflect changes to my company's color palette as part of a rebranding initiative. My documents are full of overlapping conditions which means that each document's color definitions window is cluttered with dozens of "fm_gen_nnn" color definitions. It's not possible to permanently eliminate these junk color definitions because if you save as MIF, strip them out, and then reopen the file, there they are again because of the conditional text.
    Request: please *hide* all these "fm_gen_nnn" color definitions in the color definitions window. They are of no use to anyone, and they make it hard to use the window.

    becky,
    FM's new version of conditional text creates a unique colour for *each unique* overlap condition, so, yes this really is where your "fm_gen" colours are coming from.
    Unfortunately, FM's default and generated colours are always placed first in most lists (except those with full sorts, like in the Color > View panels), which kind of limits how you can interact with the colours, i.e. you may not like it, but that's the way it is.
    You're suggestion of hiding the generated colours is an excellent and you should post it in the FM Feature Requests forum (http://forums.adobe.com/community/framemaker/framemaker_feature_requests) and also make an official feature request submission at: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=63
    Note: all FM lists allow the typing of the first character as jump to the first matching item in the list. So if you name your custom colours with a unique starting character, like zLogo_color, then typing "z" when a colour list displayed would jump to that colour (or the first one that starts with "z"). This might make dealing with long lists a bit more tolerable.

  • How to transport requests from development  to production server

    hi gurus
    i am new to SDN
    can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
    regards
    surya

    Hi
    Transporting
    There are help pages that discuss creation of transports.
    In simple terms, you: create a transport package
    add objects to the package  export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it  test the contents on the QA system  copy the .EPA file to the import folder of your production system and import it  Create a transport package file
    Here is the step by step procedure to create a transport package:
    For Export
    1. Go to system administration, and click on transport?export.
    2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
    5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
    6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
    8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
    11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
    For Import:
    Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
    4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

  • Spool request not generated in smartforms printing

    Hii all,
            I have smartform, which was printing properly in QA server and few days back when i tried to get print from Production Server, it is not generating spool request. and in QA also it is not having same as on date.
    is there anythng to check from ABAP side or there is a problem of Basis.?
    kindly give soln for points .
    - Maharshi

    hi Maharshi,
    Gimme some what clear picture abt ur problem.
    What exactly the problem in QA server.
    I mean when it is working properly and when it is not?
    and what Function Modules u have used ..?
    and i wanna know is there any other print forms are working or not. if the other are working, it is not BASIS problem.
    Regards,
    Naveen

  • 11.5.9 - Concurrent Requests not generating output

    Hi,
    In our newly cloned 11.5.9 with 9i database instance when i try to run a sample report(active users), it is completing in error, not generating the output, the request log showing
    below error message.
    +----------------------------- | Starting concurrent program execution... +----------------------------- APPLLCSP Environment Variable set to : Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are : American_America.UTF8 '.,' REP-3000: Internal error starting Oracle Toolkit. REP-3000: Internal error starting Oracle Toolkit. Report Builder: Release 6.0.8.25.0 - Production on Tue Aug 6 13:03:49 2013 (c) Copyright 1999 Oracle Corporation. All rights reserved. Enter Username: +---------------------------------------------------------------------------+ Start of log messages from FND_FILE +---------------------------------------------------------------------------+ +---------------------------------------------------------------------------+ End of log messages from FND_FILE +---------------------------------------------------------------------------+ Program exited with status 1 Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20254993. Review your concurrent request log and/or report output file for more detailed information. +---------------------------------------------------------------------------+ Executing request completion options... Finished executing request completion options. +---------------------------------------------------------------------------+ Concurrent request completed Current system time is 06-AUG-2013 13:04:01
    Thanks,

    EP-3000: Internal error starting Oracle Toolkit. REP-3000: Internal error starting Oracle Toolkit. Report Builde
    REP-3000 is a known error which is related to DISPLAY settings.
    Please see previous threads for discussion and solution -- https://forums.oracle.com/community/developer/search.jspa?q=REP-3000
    Thanks,
    Hussein

Maybe you are looking for