Request no longer in the PSA list in RSA1

First of all, let me state that my PSA display settings are "Show all Request" and "No Time Limit".
What I did was delete a request out of an ODS, then reposted it from the PSA list in RSA1 by right clicking on selecting "Start the Update Immediately".  The request posted to the ODS and is still in the PSA table as I can see it in SE16.
However, I can no longer see it in the list of requests in the PSA via RSA1.  Any idea why not?

Hi,
In RSA1 click on the PSA in the Modelling tab
Then from menu Settings>Display Selection for PSA Tree>Select the appropriate time limits
This will display the PSA requests for the specified period.
Assign points if it is helpful.
Regards,
Sreedhar

Similar Messages

  • I have removed my iPhone from icloud and it is no longer on the device list however I can still see it in icloud settings

    I have taken my smashed (unusable) iPhone into apple for repair today and followed their instructions beforehand, removing the phone from icloud through my PC. However the guy at apple could not do anything as he said it was still connected to i cloud. On checking my account, my phone is no longer on the device list but can still be seen in icloud settings. He was stumped and asked if I had set up another apple id and maybe forgotten about it (I definitely haven't, I've had the same account for 6 years,) his other explanation was a technical glitch. I'm now stuck with a broken phone and a £60.00 a month bill and also pretty annoyed about the wasted 3.5 hour round trip. Any ideas please?  It would be much appreciated

    Hello
    Try restoring the device and setting up as new.
    If it is still shows an iCloud activation lock, then it's on an iCloud account
               The wrong device was removed from an iCloud account.
    Check any other Apple IDs you might have at
                 iCloud.com
    Get signed into them and remove that device.
    I wish this was the first time I seen this.
    Best of Luck

  • There used to be a extension for Safari called "close all tabs". It is no longer on the extension list. Does anybody know why it was removed?

    There used to be a extension for Safari called "close all tabs". It is no longer on the extension list. Does anybody know why it was removed?

    Mr. Davis answer is essentially what that extension did.  I thank Mr. Davis for this answer as I was not aware of this method.  I only brought this up becasue in Lion there is a nasty habit of Safari opening all previous tabs that where not closed when shuting down the computer.  This can cause a long delay in opening Safari becasue of all the tabs opening up.  The "close all tabs" exstension stopped all this opening process.  I have to assume that Apple replaced the extension with the process that Mr. Davis describes, however, the extension was a lot faster. By the way, I have this extension still and I still use it. I just wanted to pass it on to some other users, but guess I will have to give up on that idea.

  • TS4006 Used find my ipone to erase a lost 4s and the device is no longer in the devices list.

    I put in a request to have my iphone erased, it was offline at first but when I logged back in to check on it,  my device was no longer in the my devices list. I did not receive a confirmation email. Why is it no longer in my devices list and is there any way to tell it has been successfully wiped other than the confirmation email?

    Hi maddogdne,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Using an iPhone without a wireless service plan
    http://support.apple.com/kb/ht3406
    Cheers,
    - Judy

  • Delete PSA Request - unable to find the PSA table to see latest request ...

    Hi, I wanted to delete request thru an ABAP program in a process chain. I'm not planning to use the Process Chain variant because it will a conditional delete and I want the latest request to be deleted.
    I'm unable to locate the PSA table where I can find the reuqest. Any help is appreaciated.

    Hey,
    You can get the PSA technical name from the data source.
    Double click on data source --> from menu bar --> goto -> Technical Attributes
    Here you can find the PSA table name.
    or you can fine the PSA Table name from the below table.
    RSTSODS - Operational Data Store for the trans
    here the entry in the filed -ODSNAME_TECH while provide you the tehcnical name of the PSA table.
    Regards
    KP

  • IPod Touch is no longer under the devices list in 'My Computer' in a PC

    I've read many discussions here and all the replies say that you can't use the iPod touch as a disk to store other files but I was using it like that before. Now it is no longer appearing under the removable devices under 'my computer' and I really don't know why!
    I need to download all the photos that I've saved from the internet but I can't because of that. Idon't need any other software, I just need to make my iPod touch recognizable as a removable device again. Please help!!
    A little info about my iPod: using the latest software update (3.1), using iTunes 9, and not jailbroken.
    Hopefully you have an answer to my question. thanks!

    sorry - but it's never been possible to have the touch as a hard drive - if you want to copy photos just do it through the syncing process

  • Setting for the PSA Data

    Hi,
    I would like to know where the settings is made in such a way that the data resides in the PSA according to the defined Period of Time.
    If we are deleting a request from the InfoProvider,it can be Reconstructed provided the request is present in the PSA.
    I think by default the request presents for 30 days.
    Is there any setting in such a way that the Number of Days can be increased or decreased.
    If so,where is the setting being made.
    Thanks,
    Rajesh Janardanan

    Create a weekly Process Chain for Deletion of PSA data.
    Now in the Process Chain variant for PSA deletion enter these settings
    1.For delta load keep the no. of days =14(requests of only last two weeks will be available for reload/reconstruction)
    2.For full load keep the no. of days =2(requests of last two days will be residing in PSA  when the chain is run)
    to create the PSA Deletion variant you have to metion the PSA table name which you can get by entering the Concerned datasource name.
    regards,
    rocks

  • SPD 2013 - Copy Document action - how do you update the copied list item's metadata?

    SharePoint 2013 Designer no longer has the Copy List Item Action, it only has a Copy Document action. It seems that this action provides no way of saving the copied documents list item ID. How do you update the list item after it has been copied??
    Any help is appreciated.
    Greg Pierson

    Hi,
    According to your post, my understanding is that you wanted to copy the list item in SharePoint 2013.
    The Copy List Item is
    available only on the SharePoint 2010 Workflow platform, you can create a SharePoint 2010 workflow using the SharePoint 2010 workflow platform to achieve it.
    You can also use the Content and Structure to copy the list items: Site Settings->Site Administration->Content and Structure.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • How long can the data in PSA be kept?

    Hello all,
    If a PSA is used for data staging, how long can/should the data be kept in it in a real-time scenario?
    Your help will be very much appreciated,
    points will be awarded too.
    Thanks
    S N

    HI ,
    It always depends on the Frequency of data load and the retention of the data in the system . Ideally we only keep 2 days of data in PSA in case of full load and then keep all the delta loads in the PSA including the Intialization Request in the PSA , so that any problem occurs we can load the data from PSA .
    But before all that u need to diccuss with ur basis team regarding space or table space . And according to that u need to keep the requests in System.
    Assign points if it helps....
    Regards,
    Vijay

  • Error while activating the ODS "Request No longer Exist in ODS".

    Hi All,
    I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
    But when i am manually activating this it is not giving me any error.
    Please suggest solution for the same.
    Regards,
    Rohan Shah

    I had deleted one request from four ODS's before completely loaded from R/3.
    Before deleting the request make QM status red and then delete.
    when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
    Already you have deleted the request. How can you activate the same request?
    Have you loaded the data again?
    With Regards,
    Kishore.
    Edited by: Siv Kishore on Apr 22, 2009 3:58 PM

  • I just installed Mozilla Firefox 3.6. This is the first time have have installed Firefox. My problem is I no longer have the screen which lists which plugins need updating and researching. How can I find out which plugins need updating or researching?

    After installation it told me to update or research several plugins. I updated Silverlight and JAVA. I was instructed to shut down and restart my computer to test the JAVA installation. I did this and the installation is fine. At this point I no longer had the screen with the list of plugins that need updating or researching.

    THis is probably the page you saw.
    http://www.mozilla.com/plugincheck/
    You can also access it from the Firefox menu by clicking "Tools -> Add-ons -> Plugins" and then clicking the Find Updates button at the bottom.

  • How can i request just the navigation or just the product list when i query the dgraph?

    Is there a way to make a request for navigation only or record list only?

    That's actually the only way to query using the conversation service in Oracle Endeca Information Discovery.
    In your request, you specify a State (i.e. what is the Navigation State) and a series of configuration elements indicating "what you care about" coming back.
    If this is related to the older dgraph stack that is embedded into the Commerce Product (guessing since you mention a "product list"), you should ask the question over yonder:
    Technical Questions
    Regards,
    Patrick Rafferty
    Branchbird

  • After the latest update I can no longer see my iPhone listed on the left column - how do you get to where you can pick

    After the latest itunes update I can no longer see my iPhone listed on the left column. How can I get to the section where I can pick & choose apps etc to be synced?
    Also I had to get a new iPhone & so I backed up the night before to the cloud & my computer. When I tried to restore from back up with the new phone my back up wasn't there - shouldn't it be automatic via wifi from the cloud?
    What am I doing wrong?

    Your iphone is shown at the top of the page.
    You can also simply click View>Show Sidebar and it will look about the same as it did before.

  • On my new computer my Bookmarks list no longer highlights the page I am viewing online, soI can no longer see exactly which site I am viewing.

    On my new computer the Bookmarks list no longer 'highlights' the website that I have clicked on and am viewing online. Therefore, I can no longer see exactly which site (location/name) I am viewing because I have quite a number of bookmarks. It wastes time to go to several bookmarked sites in search of the site I am currently visiting.
    Bottom line: I want the Bookmarks list to highlight the site I am currently visiting as it did on my previous computers (all Dell). Is there a setting to make this happen?
    Please help! Thank you.
    Joancmb

    It actually does highlight but in colour which is barely distinguishable so it appears that no highlighting is on.
    See:
    https://support.mozilla.org/en-US/questions/935395#answer-363047

  • One other user & I can no longer see each other in the buddy list

    My friend & I, who have used iChat for years, and also recently, and neither of us has changed anything, can no longer see each other in either one of our buddy lists.
    We've checked:
    - That neither of us is blocking the other
    - That other people can see us - they can
    - That we can see other people - we can - we can even see the same people as each other, just not each other
    We've tried blocking & unblocking each other, in case that would reset something, and both rebooted our Mac's several times.
    Any ideas???

    Ralph Johns (UK) wrote:
    Hi,
    I can see that Accounts/Screen Names can get messed up on the various flags set by an App to and therefore On the AIM servers.
    What I can not see in this case is why it seems to be limited to just one Buddy on each computer.
    As the Block list (And therefore presumably Allow Lists) are not actually shown in the .p0list I ma hoping that deleting it and restarting ichat at one end at least will reset that iChat form the Defaults haled in the app when you do this.
    (you could delete that Account Screen Name from iChat ? Preferences > Accounts to achieve the same things in a more destructive way as it would tend to rewrite all the .plists which may included Jabber ones that are OK
    We both did delete our screen names in iChat, and also deleted ALL the prefs manually.
    Also, we've tried using entirely different computers to log-in to those same accounts, with the same results - somehow we're blocked from each other.
    I think we're both giving up at this stage. We have additional accounts we can use to see each other. But it would be really nice to get to the bottom of it, because if it happens once it can happen again. Who knows? Maybe there are other people in my buddy list that this is happening with right now, but we don't know it. This person just happens to be someone I chat with a lot, and we noticed we weren't seeing each other.

Maybe you are looking for

  • HT3529 Help with multiple e-mail addresses under one Apple ID

    My 3 kids each have their own e-mail addresses under my Apple ID for the iMessage feature on their iPod Touch's.  Just recently I began receiving their iMessages on my iPhone despite the fact that each device has only its own email address selected. 

  • Portal favorites not displaying the iview.

    Hi Team, We have a home role with a welcome page which is the first role to be displayed to every user logged in to portal. Now we have enabled the option "Add to Portal favorites" to the portal objects. So when a report (BI / Bo report) is added to

  • Droid turned itself off, now wont turn back on

    I was using my phone when it turned itself off. now it wont go back on.  had it a while.  shouldnt have been hot.  took the battery out for a couple mintues and still nothing.  plugged it in and the light comes on when its chargeing.  the battery was

  • How to edit a post?

    Well just from the topic, can some one tell me how i can edit a post that i posted B4 at any forum? Thanks in advance.

  • Certain Internet Explorer versions crash on clicking of datepicker icon

    Hi, I am using sun's web ui calendar tag to display the date field as well as the datepicker icons. However, on certain internet explorer versions, a crash occurs on clicking the datepicker link. The IE version is as follows:- **Version: 6.0.2900.218