Request not yet updated with datamart

Hey guys,
I am having trouble with an Upload.
Some days ago I uploaded an Excel file in an ODS without any problems. Everything turns out green:
Load: green
Activation: green
Yet the data is not in my Infocube yet, because when I run a query the data is simply not there.
Now when I click 'manage data' on the ODS, I see this message that says 'Request not yet updated with datamart'.
What can I do about this or what might be the problem?
Thank you very much,
Filip

Hey Jürgen,
I tried the "update 3.x" but it wasnt working.
Next I tried to generate a datasource and to "update 3.x data", this 'worked' it didn't give me an error, but still my request is still "not yet updated with the datamart".
Any ideas?
Filip

Similar Messages

Firefox is trying to update my 8.0 version to 9.0.1. I'm not ready to do so because the Norton Toolbar is not yet compatable with the new Firefox release. How do I get firefox to stop trying to update every time I open the application?

Question
Firefox is trying to update my 8.0 version to 9.0.1. I'm not ready to do so because the Norton Toolbar is not yet compatable with the new Firefox release. How do I get firefox to stop trying to update every time I open the application?

Swarnava wrote: '''''Firefox 9 is Compatible with Norton 2011, 2012, 360 v5'''''.
This reads backwards, It is the other way as "Norton update is compatible with Firefox 9".

How do I go back to Firefox 5.0? I need to use Selenium IDE, which is not yet compatible with 6.0.

How do I go back to Firefox 5.0? I need to use Selenium IDE, which is not yet compatible with 6.0.

The link is to the latest update to 4.o which was 4.0.1
The 4.0.1 and 5.0 are two separate versions as installing 4.0.1 over 5.0 will just give you the old 4.0.1 as the end result.
The 5.0 is partially as a security update in place of 4.0.2.
The Skype extension was only for to make it so you can dial phone numbers on a web page in the separate Skype program right so if you were not using it then no need for the Skype extension for the separate Skype application to work.

Document from last posting run in 2007 are not yet updated

Hi Guru's,
When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click it says: "Document from last posting run in 2007 are not yet updated"
So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
Please help how we are able to post asset accounting for 2009.
Thanks
Mila
Edited by: Mila Calonge on May 4, 2009 10:02 AM

check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
Those might not have processed due to GL account assignment or cost center master data issues.

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?

I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?
Thanks,
glhiker

Hi glhiker,
I understand that you may be having some issues with your ability to update your iPad. Here is an article that references your error code and can help you take some steps to resolve it:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/TS3694
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Where can I access a version 5 download? Version 6 is not yet compatible with an application I use for school.

Is there a version 5 download available on the website? Version 6 is not yet compatible with an application I use for school.

I think this link will work:
''moderator deleted a hyperlink to an unsupported version''
I suggest, that while Mozilla is on a "rush to release updates faster than fixing bugs" kick, NO ONE should have "automatic updates" on. Go into "tools" and turn off that option, and NEVER agree to accept an update unless you know that things have been made compatible and that the bugs have been ironed out.
It's also wrong of them to release NON-beta copies, automatically, which cause incompatibility, every few weeks. That should only happen every year or two.
We need to ban together and quit installing their updates until they quit rushing them out too quickly.

Valuation area not yet productive with material ledger

While doing goods receipt at MB1C,i got the below error:
The description of the error is given below
Valuation area XXX2 not yet productive with material ledger
Message no. C+020
Diagnosis
The material ledger has been activated for the valuation area but material data has not yet been converted in this valuation area.
Procedure for System Administration
If you want to work with the material ledger, choose Accounting -> Controlling -> Actual Costing/Material Ledger -> Utilities -> Production Startup.
There you can convert the data for the material ledger by following the instructions in the online documentation.
Note
Setting the material ledger to productive cannot be undone.
See also:
Actual Costing/Material Ledger in the SAP Library.
The implementation guide for Actual Costing/Material Ledger.
Can you kindly suggest me how to fix this error.
Regards
Sabera

Hi Sabera,
The Valuation Area is not activated for your material ledger. Go to SAP Access>>Accounting>>Controlling>>product cost controlling>>Actual Costing>>environment>>Production Start up>>Set Valuation area as productive.
If you already activated Valution area in to Productive Statge.
Then go to T.Code OMX1 and for your valuation area XXX2 tick the ML activation box.
the error wont come
regards
srikanth

How to search my stolen iPhone if it was not yet registered with iCloud

How to search my stolen iPhone if it was not yet registered with iCloud

You can't.
The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored.

Open PO did not get updated with new price.

A mass price change was updated in SAP for one of the supplier . All open orders did not get updated with this new prices.
Can anyone tell me the reason why ?
-Amol

hi
i think u have to do it manually
logically if u see u can use diffrent prices in diff po
if ur price is inr 100 in 1st po and u done gr ur rice will get updated in mm suppose it is 105
next time u create the po of 110 rs and done gr
suppose ur price updated is 108 rs inmm
so it is not happening that 108 is get updated in ur 1st po
right so i think u have to update pos manually
if i am wrong plz let me know
regards
kunal

I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

Use Internet Recovery. You shouldn't need an AppleID. http://support.apple.com/kb/ht4718
Internet Recovery will install the OS that shipped with the Mac. You can then upgrade to Mavericks if that was not it.
Do you have an App Store account? Did you ever use it to install the OS?

Error Message :Valuation area 1000 not yet productive with material ledger

Dear Floks,
I need some clarification to get rid of this error message and move further.
While saving the PGI I am facing the follwoing error message: "Valuation area 1000 not yet productive with material ledger----
The material ledger has been activated for the valuation area but
material data has not yet been converted in theis valuation area."
Plese respond with the solutions ASAP.
Thanks in advance.
Regards
ANGKS

Hello Padmaja,
You will to check the following before activation the Val.area
1) OMX1: Check if ML is active against the plant IF NOT
2) Use tcode CKMSTART - Enter Val area - EXECUTE.
Regards,
Manoj Reddy

Valuation area HDQF not yet productive with material ledger

Dear all,
When i PGI, there is an error: Valuation area HDQF not yet productive with material ledger.
Pls help me to resolved.
Thanks & Regards,

Hi Quang,
Please run CKMSTART tcode and give that plant no(HDQF). Execute the process and then click on Confirm button in the dialog box.
Hope this helps.
Rgds,
Antima

KONV not getting updated with new condition type value

Hi,
I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
Thanks
Shweta

Hi Vasu,
It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
Thanks,
Shweta

I have a sonos music system that does not yet work with Lion and will not for about 3-weeks. I need to uninstall lion and go back to snow leopard, how do I do that?

I have a Sonos music system that is not yet compatible with Lion and will not be for several weeks. How do I uninstall Lion and go back to Snow Leopard?

While we all have MacBooks only a few have Lion. There's a Lion Support Community. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Request not yet updated with datamart

Similar Messages

Maybe you are looking for