Request number in DSO
hi experts, I just have a doubt on request number in dso, for example,I have 2 dso, data flow like below:
PSA>DSO A->DSO B
In DSO A , Manage->Requests
Column 'PSA Request Number Generated when Request is Activated' when activated the request,it generated.
Column 'Request Number' come from PSA request number
In DSO B , Manage->Requests
Column same as DSO A
Column 'Request Number' like DTPR_XXXX
I don't know what's the use of column 'Request Number' in DSO B ,is there any relationship with DSO A 's request?
Thank you for any idea.
hi kumar,
I think I found the answer in the following link:
How to Identify which reuest from PSA has been taken by DTP
thanks any way for your prompt answer.
Similar Messages
-
Where can we see the deleted requests from the DSO
Hi all, i have deleted a red request in the DSO , which stopped the process chian, so i manuallly loaded DTP and activate , repeated the pc and its fine now, but i need the information regarding the red request i deleted from the requests tab, can u please help me finding where can we see the deleted requests from the DSO, thanks in advance...
Hi Raghu,
Open the PC in SE38,goto PC logs on which day DTP failed.right click on DTP-->select Process monitor
Click on filter buttor>select last oneweek>Execute
Then select the failed request(It shows status as deleted) You find the details here itself -->take the request number from this
goto RSRQgive req id>Execute
Hope this helps.
Regards,
Venkatesh. -
How to set request number of info package using start routine
Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
SangitaYou'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source' -
Want to get request number to BPEL process in an interval
Hi All,
I have two applications A and B.I need to receive request message from A to B through BPEL process. BPEL process receives the request data(through schema- Source of transform activity) from A and updates that data into B(Target -request schema of B).BPEL process is the middleware between two applications
My requirement is :
I want to analize request data in an interval of 24 hours. I have one parameter('sequence') in the request schema of B which has to indicate the request number to BPEL process.
Clear explanation to requirement details:
Application A starts pushing data at 12 'o clock(0:00 hrs midnight) and then parameter 'sequence' should be integer 1 or 0.Like that 'Sequence' should be increased by 1 for every request to BPEL process.
I want the sequence values like below(for 24 hrs cycle):
First request :
Reuqest push time - 0:00 hrs
Sequence - 1
BPEL process instance(which will be created automaically in EM console) - Instance1
Second Request :
Reuqest push time - 1:30 hrs
Sequence - 2
BPEL process instance(which will be created automaically in EM console) - Instance2
1
Third Request:
Reuqest push time - 4:00 hrs
Sequence - 3
BPEL process instance(which will be created automaically in EM console) - Instance3
Like that
last request in 24 hrs cycle should be :
Reuqest push time - 23:00 hrs
Sequence - Some number according to number of requests at that time.
After 24 hrs ,Sequence again should become as 1 to indicate the starting point of the 24 hrs next day.(like data in above table)
Can you help me in this regard? I am using transform activity in which I have 'sequence' parameter .
Thanks in advance
Edited by: 899283 on Aug 25, 2012 7:16 AMCreate a "While" activity.
Create a variable named seq of type int.
In the while condition check the current time.
xp20:current-time() < <counter reset time>
Create a pick activity to receive the message inside while loop.
Create assign activity in the while loop. Assign the value of variable seq to the payload and increment it by one.
Outside while loop , reset seq back to 0 by using another assign activity.
In case the composite has to run continuously after first submission, use another outer while loop to check the condition while seq = 0.
Hope it helps.
Regards. -
How to find request number of SAP Script's Form
Hi All,
Can anyone tell me how to find out request number of scipt's form
Regards
ShashikantHi,
Se03->Search for Object in Requesta/Tasks--->Right Click ->Execute->Add a new entry with check box ticked,FORM,& Form name on the right side-->F8 It will display all the requests pertaining the form you have keyed in.
Regards
Raju Chitale -
How to find CR Request Number inside a package
Hi Folks,
how to find the CR Request Number list present inside one package.
Reg,
HariharanHi ,
i had gone through the Transaction se03 Search for Object in Request/Task, in the selection screen no option for Package can you just breaf about the Selection Screen Step.
Reg,
Hari. -
Tcode to look for a transport request number
Hi all,
I have to look for request number details .I dont have access to SE01 . How can i look that details?Hello Priya
The standard transaction for finding transport requests is <b>SE03 </b>(choose option <i>Requests/Tasks -> Find Request</i>).
If you are not authorized to call this transaction try to execute the underlying report <b>RSWBOSSR </b>using transaction <b>SA38 </b>(menu <i>System -> Services -> Reporting</i>).
Regards
Uwe -
How to get EBS Concurrent Request number (and more) into BIP Report Layout
hi,
I have been using BIP for 9 months but have several years experience of Reports 6i development (matrix, drill-thru etc). We are beginning to use BI Publisher with EBS and would like to be able to incorporate the Concurrent Request number into the report layout (preferably in the footer area). I have looked back over previous forum posts and have found mention of how to get the report parameters into the XML datastream and template, but nothing for the Concurrent Request number. I've also looked at the DevTools/Reports forum but cannot see anything similar there.
It would add a lot of value to generated output for end-users if this information (+ environment/instance name etc) can be put into the layout.
SeanHi
Create a data query in data template/reports as
select fnd_global.conc_request_id "REQUEST_ID" from dual
and this will pick up the request id and then u can use it in the RTF layout
Hope this helps.. -
How to delete the spool request number
HI Masters,
My program creates a spool request. And i want to delete that spool request number? How to delete that??
Thanks in advance.hi
good
The program are RSPO0041 or RSPO1041.
This is handy whenever you encounter a user who managed to create a lot of spool requests which are choking your system.
Deleting them with SP01 will be too slow and you will get time out if it exceed the online time limit specify by your basis people.
<b><REMOVED BY MODERATOR></b>
thanks
mrutyun^
Message was edited by:
Alvaro Tejada Galindo -
How to delete the Request Number
Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards -
In how many ways can u release a request number.I know se10,se09,se01. are there any other ways.
Tanks
RaghavHi Raghu,
GO to se01, se09 or se10
select your request no.
if not released u can delete it from here.
And,
Do you mean the Purchase requisiton ,then go to ME52
select the line and press the delete button and save.
cheers,
Hema. -
Unable to Release request number from DEV
Hi All,
I want to release the request Number from Development,But it is not allowing me and saying :'You are not authorized to lock requests or tasks". please help how can i solve this problem as we Dont have Basis person.
Target System is QAS.
Anu,.
Moderator Message: If you do not have Authorization, then thats that! If you do not have a Basis Consultant, that should not be your headache.
Edited by: kishan P on Mar 2, 2011 11:13 AMse03 ---> search for objects in request/tasks ---> choose correct line (for your report, choose prog) ---> write your report's name ---> choose all request types ( also modifiable)
search your report in other modifiable requests
regards, -
Transport Request Number - Object Status is LOCKED. What does it mean?
Hi Friends,
When checking in SE09 transaction my TR number "Object Status" is showing as LOCKED.
What does it mean
Whether I can transport objects under this TR Number to Quality System?
Will it give any problem while transporting?
Regards,
Viji.The main reason to lock the request is to avoid any duplications.
You can also unlock the request if you want using SE03 transaction.
Goto SE03 transaction,select unlock objects and execute.give your
request number and execute.it will be unlocked. -
Transport request number in LO extraction
What we have to mention in transport request number field while doing LO extraction ? where to find it ??
Hi
Trnasport request number is system generated. you can foloow the below steps to activate and transport the LO data source.
1) activate the data source in RSA5
2) goto LBWE, you will find the DS in yellow color.
3) click on activate, now system will promt for transport number. note down this transport number and click on continue
4) you can check this transport in SE01/SE09 and release the same request.
5) based on your system transportation settings, you can see this transport in next system in STMS
check out the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6?QuickLink=index&overridelayout=true
Regards,
Venkatesh -
ORA-01422- exact fetch returns more than requested number of rows in D2K Report
Hi All,
Greetings.
I am using a report which is being called from the from in one of my application. The report is working fine from quiet a long time. I have an error with a particular record alone and it is working fine for all other records.
When I try to run the report, I am getting the error as Rep-1401- 'cf_vatformula' : Fatal pl/sql error occured.
ORA-01422- Exact fetch returns more than requested number of rows.
I opened the formula column and run the sql codes that are used in the formula column cf_vat and all of them are working fine. None of them are fetching more a single row. But, when I run the report, I am getting the same error as mentioned above.
Please help me resolve the issue ASAP. Thanks in Advance.
Regards,
Bhaskar.Hi InoL,
Thanks for your time.
I am sure that there is no other procedure used in cf_vatformula. It has select queries in and all of them are fetching the data not more than a single row.
I have tested each and every select query with every possible output.
Regards,
Bhaskar.
Maybe you are looking for
-
1/15/2013 - Flash Player 11.6 Beta
Flash Player Beta Channel Update The weekly Flash Player Beta update, 11.6.602.146, is now available for direct download and automatic installation via Background Update. The latest version of Flash Player Beta is available here: http://www.adobe.com
-
Like I said. . . I recently migrated from an old MacBook to a new MacBook Air. I decided that since I have many tens of thousands of photos, I would keep them all on an external hard drive in the dedicated "iPhoto Library" (which I was very careful t
-
Windows security update, now forms don't work
Ran various Windows Server 2003 updates over the weekend and now all of my forms come back with errors saying fields are undefined. These are all forms that were working before. Any ideas? Sue
-
I LOST MY PHONE HOW I CAN FINE IT.. PLEASE HELP ME
I lost my iphone, please help me to locate my phone
-
CLOI_CHANGES_UPL_31 select routing
Hi All, Does anyone knows how to select the routing when using function module CLOI_CHANGES_UPL_31. I have tried to enter the routing group and counter number into CLOI_ORDI_IMP but doesn't work. Please kin Thanks.