Request password change

Hi, I need to request a password change to a group of users, is there a function or bapi that I can use to request the change?
Thanks

Hi,
Try rhis BAPI 'BAPI_USER_CHANGE' or contact BASIS team.
Regards,
Jyothi CH.

Similar Messages

Requested password change, email from iforgot never arrives in my inbox. The answers to the security questions don't work either.

I am trying to set up my son's new itouch message and Face Time. I made an apple id for him, but think the process got interrupted before I finished and now we can't sign into his account. I went to manage apple id, requested an email be sent to reset password (because answers to security questions don't work), it shows an email was sent, but it never shows up in his inbox or mine which is his rescue email. I tried creating a new apple id with his email, but it shows it already exists. I am not sure what to do next. Does anyone have any suggestions? Everything else is run through my iTunes account so he can have access to all the apps and music that the rest of the family has purchased/uploaded. Help please! Thanks.

Contact iTunes
Apple - Support - iTunes - Contact Us
Rescue email address and how to reset Apple ID security questions

Apple does not send a request to change the password on the email

I forgot the password for this account. but I'm on the side of the iforgot look but you do not send e-mail to confirm the password change. Now I do?
Please help!!!!!

You've checked the spam folder as well as the inbox on your primary email account, and if you have a rescue email address on your iTunes account then you've also checked that email account ?
If you still can't find it (and you've tried re-requesting the reset email and you can't reset your password by answering your security questions) then you will have to contact Support in your country to get it reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

Lost old Apple ID password,Apple ID request/did password change,still can't access old ID

-Went to update some iPad Apps
-Said I had to sign in with Apple ID
-My OLD email/Apple ID showed with the prompt for the password
-I entered what I thought the OLD ID password was
-Prompt said it was wrong, tried options, still wrong
-Prompt said I could change my password
-Changed via an email sent by Apple to my NEW email/Apple ID
-Went back to sign into my iPad under my OLD email/Apple ID with the new password
-Still rejected. Most likely because the password change was for the NEW Apple ID but had to try.
-Tested the NEW password under the new Apple ID and it worked
-Soooo....I can't get into my apps, under the requested OLD Apple ID because I don't have the OLD password and there's no way to change the OLD password without knowing it.
-So now I can't update important apps such as iOS Numbers, iOS Pages and the like..........
Any suggestions.................?

Go here, find the instructions for your country and initiate a dialog with Apple in order to get their help.
Contact Apple for help with Apple ID account security - Apple Support

Iphone4 wont connect to home wifi connects to neighbors..others iphones ipads connect to this wifi cannot change it and cannot access apps store. Does nor request password just "cannot access"

Iphone 4 wont connect to home wifi but connects to neighbors open wifi. Family members with iphones can connect to the wifi automatically and Mac compiuter in home connects to this wifi and this iphone did connect automaticcally until a few weeks ago. Does not request password when try to connect to own wifi..just says "cant access.". Also cant access the Apple apps store to purchase apps but all other function operate normally. Apple store tech says nothing wrong with phone. It connected to their wifi and coud access apps store from their wifi. This iphone belongs to son who is autistic. I am mother trying to resolve this issue and very frustrated. Have reset router but no change.

Based on the symptoms, your phone is fine, and the Router is the problem. Try http://support.apple.com/kb/TS1398. Specifically the "forget this network" step. I would also consider resetting the wifi network password. Sometimes that will allow a connection.
HTH

HT5622 I keep on getting emails asking me to reset my password when I haven't requested a password change. Is somebody trying to access my account as i've had 4 emails now in last 3 days?

I keep on getting emails asking me to reset my password when I haven't requested a password change. I somebody trying to access my account as i've received this msg like 4 times in last few days now?
Thanks

If you use Mail.app, hover your cursor over any of the links in the emails you're receiving to see if they lead directly to an Apple-owned subdomain, like so...
If the links in the email(s) you received are exactly like this, then it's possible there's an issue with your account that you should probably follow up on. If they don't look like exactly like this, then these are phishes, and you can post screenshots of those links here so that someone from Apple can follow up on them. (Best not to click on these!)

Initial password change requested with SSO

Hi all,
we have well working SSO with EP6 SP2 and standalone ITS. SSO is based on SAP logon ticket. Only one annoying thing appears.
If a new user is created in SAP R/3, ITS asks for changing of password.
Does it mean that the user must initially (and later again according to password policy) change the password although we do not use direct access to R/3? If no password change should be required with SSO, how to solve this issue?
EP6 SP2 P4 HF8
ITS 6.2 PL14
R/3 4.7
Thanks in advance for any good idea.
Pavol

Hello,
We are on a very similar setup as above:
EP 6.0 SP12 with ITS.
What we are seeing is that the initial password dialog comes up but there is only the input fields but no "Submit" or "Change" buttons. In summary, new users are not able to change their password through the Portal.
Any ideas why this might be happening?
Thanks,
Siva.

Vpn client radius ad password change

Hi
I've read a few posts about this on the forum and it seems like very few people are able to resolve the issues they are having.
I have a working remote access vpn and I'm trying to add the password-expiry functionality. I've set a test user in AD to "change password at next logon" and when I logon using this user in the vpn client (5.0.07.0410) I am prompted for a box to type my new password twice. This is never written back to the server and the original authentication box pops up again. The password change box has the codes E=648, R=0, V=3 as in the attached image.
Does anyone have this working with radius and AD? A windows password change would normally request the old password to reauthenticate and then the new password twice.
Thanks
Cammy

Cammy,
Are you using radius to authenticate the vpn session or are you using ldap which is pointing to AD for authentication? This will work with radius since you can use mschap v2, however i want to be sure how you have your ASA setup first.
Thanks,
Tarik Admani

LDAP User Password changing...

Hi all,
We use windows AD LDAP server for central user administration..
I am trying to change the password of my own in the portal server..how can i do this ?
When i see the password change option in Useradmin/identity management under All data sources, i can see 1.LDAP
2.UME Database
Can i just choose LDAP and Click "Generate New Password " ?
I would like to know exact procedure to change the password..( no matter what the password policy is )
Please help..Appreciate your time and will be rewarded with points if helpful.
Thanks!
Addy

> There are standard UME configs that are set to read/write and readonly. The name of the config normally has it as part of the name - readonly or writeable.
Where can i check the UME config settings to LDAP ?
> If your LDAP product doesn't have a web based frontend,
I don't know if they have any..I know the LDAP server Hostname.How do i login to LDAP WebUI using a webpage ? ( eg : hostname: port/xxx )
How do you make sure the LDAP product's password rules are enforced?>
> Make it a problem for the LDAP administrator!
From Portal side, how do i check if the LDAP rules are being enforced or not ? If it is not, then i can raise a question to LDAP Admin. And i cannot send a request to change the password for me everytime i want right ?
Any good docs on Portal with LDAP ?
Thanks!
Addy

Unable to log into iCloud because old email pops up requesting password. Password not working and unable to receive reset

I changed the main email on my Appleid a few months back. Everything worked fine until uppgrading to iOS7 on my phone. I am now unable to log into iCloud because the old email pops up and requesting password which is not working. I cannot rest the password because my old email is unvalid as I have changed network provider. The id works fine on Appstore and iTunes so its only iCloud that making trouble.
Any suggestions to remedy this problem?

I'm also experiencing the same issue.
I've had to reset my password 3 times in the last 3 days.
At first, I couldn't get my email. I sweated it out for 12 hours, reset my password and I was good to go again. 48 hours later, I ran into the same issue. Only problem is, not only do I get the 'Incorrect username or password' on my device, but my iCloud.com login no longer works. so now I can't read my messages on the web OR on my device/computer.
I have went to appleid.apple.com and reset my password there: no luck.
I have reset the settings on my device: no luck.
I have Erase and Installed iOS 6.1.2: no luck.
I have restored my device back to factory settings: no luck.
I have performed a DFU restore: no luck.
This is my main account for, well everything.

Can we lock down user admin functionality to allow password changes only?

Hi,
Is it possible to lock down the user admin functionality so a specific role can only change passwords?
We have a large user base of >10K infrequent users that are forced to change their passwords every 30 days. We suspect a lot will require password changes and we are keen to not have the tech team spending most of their time dealing with such requests. We would like to pass this task onto data management but not allow them the system administrator functionality.
We know we can create a responsibility with a limited menu available so the operator can see only the security/user/define menu. But this will still allow the person to add responsibilities to existing user accounts and create new user accounts, both of which are deemed unacceptable security risks. Is it possible to lock down the form as well as the menu? Allowing operators to only change the password of existing users? Or can we use the custom.pll to error when a user tries to do anything except edit the password field when in this role?
Thanks
Matt

You should be able to do that. You would create a new privilege level (ie 7), assign all commands to that level except (this is my guess) the command vpn-sessiondb, you would put that at a lower privilege level (ie 6). Here's a write-up that may help getting you in the right direction.
http://www.packetpros.com/2012/08/read-only-asdm.html

Password change from SSH in Cisco Secure ACS 4.1

I am using cisco ACS for windows Release 4.1(1) Build 23 Patch 5.
I have enable password aging for 30 days. after 30 days it is prompting me to change the password while i telnet to any client. it is working fine.\
Recently we have disabled telnet in all network devices and using ssh instead of telnet.
Am not able to change the password from putty. same if i connect through the telnet it is prompting to change the password.
Because of this i am not able to access any network devices after 30 days.
Suggestions will be greatly appreciated.
Thanks in advance.

Went through this painful exercise a couple
weeks ago. You need to use the IOS 12.4
K9 image on the routers because password change
only supports on ssh version 2. See example
below:
[Expert@P1-NGx]# ssh -2 -l ngx1 192.168.15.248
[email protected]'s password:
Password change request
Enter [email protected]'s old password:
Enter [email protected]'s new password:
Retype [email protected]'s new password:
C3640>sh ver
Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.4(13a), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 06-Mar-07 20:25 by prod_rel_team
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
C3640 uptime is 1 week, 5 days, 13 hours, 5 minutes
System returned to ROM by reload at 03:18:41 UTC Fri Nov 28 2008
System restarted at 03:20:58 UTC Fri Nov 28 2008
System image file is "flash:c3640-jk9o3s-mz.124-13a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 3640 (R4700) processor (revision 0x00) with 98304K/32768K bytes of memory.
Processor board ID 24829119
R4700 CPU at 100MHz, Implementation 33, Rev 1.0
2 FastEthernet interfaces
4 Serial interfaces
1 HSSI interface
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
C3640>
Easy right?

I keep getting requests to change my apple id and it is not me requested it.

i keep getting requests to change my apple id and it is not me requested it.

If you believe your account information has been compromised, visit My Apple ID to change your password immediately. If you need additional help, contact Apple Support for assistance.
From:
http://support.apple.com/kb/HT4232
I would contact Apple support as well as trying to change the password.

Mass password change for selective User id's ?

Hi,
    Thanks to answer for my last question, really appreciated your help.
My new question:
1.   If I create Mass User Id's by using SU10, pwd's are generated automatically. Is there a way to pick a pwd e.g initpass for all ?
2.   Is there any program available which can be used to reset pwd's for several User Id's as   initpass or something like that ?
Please help. thnx in advance.
Syd.

You can also create an ABAP program which can be used to mass change users passwords.
Here are the functions that will do what you need
SUSR_GENERATE_PASSWORD - Generates a Password
BAPI_USER_CHANGE - You can use this BAPI to change just the password of a user
Here is an example of some abap code. There may be some syntax errors and possible other issues. I just typed this out and didnt check it. Hope this helps
constants: con_comma TYPE c VALUE ','.
data: it_tab TYPE filetable,
        gd_subrc TYPE i,
        v_filename_string TYPE string,
        p_npass like XU400-NEWCODE.
DATA: BEGIN OF itab OCCURS 0,
          dLine(40) type c,
      END OF itab.
DATA: begin of it_Users occurs 0,
          UserID like BAPIBNAME-BAPIBNAME,
          Password Like XUBCODE,
      end of it_Users.
parameters: p_file like rlgrap-filename default 'c:\users.txt' LOWER CASE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*&                   FILE_OPEN_DIALOG METHOD                           *
    CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title     = 'Select File'
          default_filename = '*.txt'
          multiselection   = ' '
        CHANGING
          file_table       = it_tab
          rc               = gd_subrc.
        LOOP AT it_tab INTO p_file.
        ENDLOOP.
        v_filename_string = p_file.
START-OF-SELECTION.
*&                   GUI_UPLOAD function                               *
   Upload file to internal table
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                      = v_filename_string
          FILETYPE                      = 'ASC'
          HAS_FIELD_SEPARATOR           = 'X'
        TABLES
          DATA_TAB                      = ITAB
       EXCEPTIONS
         FILE_OPEN_ERROR               = 1
         FILE_READ_ERROR               = 2
         NO_BATCH                      = 3
         GUI_REFUSE_FILETRANSFER       = 4
         INVALID_TYPE                  = 5
         NO_AUTHORITY                  = 6
         UNKNOWN_ERROR                 = 7
         BAD_DATA_FORMAT               = 8
         HEADER_NOT_ALLOWED            = 9
         SEPARATOR_NOT_ALLOWED         = 10
         HEADER_TOO_LONG               = 11
         UNKNOWN_DP_ERROR              = 12
         ACCESS_DENIED                 = 13
         DP_OUT_OF_MEMORY              = 14
         DISK_FULL                     = 15
         DP_TIMEOUT                    = 16
         OTHERS                        = 17.
      IF SY-SUBRC <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Loop through internal table and split the comma delimited file
LOOP AT ITAB.
      SPLIT ITAB-dLINE AT con_comma INTO it_Users-UserID
                                       it_Users-Password.
      APPEND it_Users.
ENDLOOP.
LOOP AT it_Users.
     if it_users-Password is initial.
        CALL FUNCTION 'SUSR_GENERATE_PASSWORD'
             IMPORTING
                 PASSWORD = p_npass
     endif.
     CALL FUNCTION 'BAPI_USER_CHANGE'
               EXPORTING
                 USERNAME                = it_users-userid
                 PASSWORD                = p_npass
                 PASSWORDX               = 'X'
               TABLES
                 RETURN                  = it_ret2.
              Loop at it_ret2.
                if it_ret2-number = 039.
                  write: / 'password changed'.
                else.
                  write: / it_ret2-message.
                endif.
              endloop.
              Write: / ''.
              refresh it_ret2.
ENDLOOP.

Emails from Apple about password change

Good evening all!
I am asking this for a friend. She is getting the following problem ...
She is being inundated with emails from Apple saying she has requested a password change (itunes/books etc) - which she hasn't.
These emails from Apple have been coming regularly for several weeks and are entitled 'How to reset your password' with a link to reset, which expires after three hours if you haven't continued.
She hasn't bought anything from ITunes for a while so cannot understand what is prompting them. She changed her password about a year ago after receiving a message checking whether she was aware a different computer had been used to purchase something (she was - her iPad).
Should she be worried that someone is trying to access her account and this is triggering the emails?
Thanks for your help.

kirenzi wrote:
Should she be worried that someone is trying to access her account and this is triggering the emails?
Definitely!
She should immediately change her password - NOT by clicking on any link in an email, but by using a conventional Apple website to do so:
https://iforgot.apple.com/password/verify/appleid

Request password change

Similar Messages

Maybe you are looking for