Request process in SAP

Hi,
Can anybody explain me in detail how generated requests after customizing are transported from one client to other.
And how SE09 and STMS tcodes used.

Hi,
In SE09, you have to release the requests ..
you will see two requests one at Header and under which one Sub..
you first seelct the sub & click the Truck button & Save
then select Header request , click Truck button & Save..
Then just mail the Request numbers to Basis Team, They will transport them to Another client..
Thx
Raju

Similar Messages

EH&S WWI for GLM print request processing

Hi all,
we installed EH&S WWI for GLM print request processing scenario, following the note:"1394553", but when we try to print we receive this error from WWI:
Start Function 'WWI_PRINTREQUEST_CREATE'
Initializing parameters
Receiving data from client
   calling RfcGetData returned 0
    receiving data lasted: 0.0 sec.
    Retrieving print request data from RFC interface
    Using Temp Directory E:\WWI\TEMP\BSV100000000000062
   Delete files in E:\WWI\TEMP\BSV100000000000062
    Creating text file E:\WWI\TEMP\BSV100000000000062\r000000000062.val
    Writing data to text file 39 lines, 1009 characters
    Updating print request status from 0 to 1
    [DB time] Writing print request lasted 9 ms
Start processing command 'Create print request' in synchronous mode
Creating print request 000000000062
WwiSapDms::retrieveDocument: RFC error when calling ABAP function moduleRFC connection is not Unicode
WwiSapDms::retrieveDocument: RFC error when calling ABAP function module
key     : RFC_ERROR_SYSTEM_FAILURE
message : See RFC trace file or SAP system log for more details
Reading SBV document IB0120510 from Cache failed
    WwiCacheRead resulted with -1
    Updating print request status from 1 to 5
    [DB time] Writing print request lasted 4 ms
##### Command 'Create print request' finished with status E #####
    Storing ERR file E:\WWI\TEMP\BSV100000000000062\l000000000062.err into DMS succeeded
    22 lines
Sending data to client
   calling RfcSendData returned 0
    sending data lasted: 0.0 sec.
Elapsed time : 0.1 sec.
We don't understand what kind of RFC or what part of customizing we have to check, could you please help us?
Thanks,
Christian

Dear Pugal
we are not using GLM + and I am not sure about the technqiue used there to handle load balancing. Regarding general WWI setup I assume you know this Note: EH&amp;S: Availability and performance of WWI and Expert servers
On the top there is a further SAP Note abvailable which might be of interest. This is referenced here:
http://de.scribd.com/doc/191576739/011000358700000861002013-e
May be check OSS note: 1958655; OSS Note 1155294 is more related to normal WWI stuff; but may be check it as well. May be 1934253 might help better
May be this might help.
C.B.
PS: may be check as well: consolut - EHS_MD_140_01 - EH&amp;S-Management-Server einrichten
The load balancing of synchron WWi servers is donein the "RFC" layer, therefore you have no inffluence here, for asynchron WWI servers you can do a lot to manage the WWI load balancing by using "exits" etc.

Letter of Credit Process in SAP

Hi Guru's
Can any one send me or explain me the letter of credit process in SAP or sales cycle?
please send step by step configuration or documentation on the above process.
my mail id is [email protected]
Suitable points will be rewarded.
thanking you in advance for your kind help.
Thanks n Regards
Toshniwal

Hi,
Please find the Letter of credit details
The configuration is as follows - OVFD, Define and assign payment guarantee, OBYN,OBYH, and OBYK. It is properly working.
I made all the required transaction VX11N, VXA2, F-36, F-34, F-20
Letter of Credit: A letter issued by a bank to obtain payment for goods. When a letter of credit is confirmed, the advising bank guarantees payment only if all stipulations in the letter of credit are conformed to exactly.
1.The importer first request a quote for merchandise. This may or may not include transportation and insurance costs.
2.The importer prepares a purchase order based on the offer received from the exporter.
3.The exporter creates a proforma invoice and sends it to importer.
4.The importer opens a letter of credit with the opening bank in the country of import.
5.The opening bank sends the letter of credit to the advising bank in the exporters country.
6.The advising bank advises the exporter that a letter of credit has been opened in his favor.
7.The exporter ships the merchandise in accordance with the terms stipulated in the LOC.
8.The exporter gives the documents proving that the shipment was made in conformance with the LOC to the advising bank.
9.The advising bank pays the exporter based on the documents received.
10.The advising bank transfers the documents to the opening bank and receives payment.
11.The opening bank gives the document to the importer.
12.The importer calculates the duty rates, file the declaration with customs and pays the customs duties within the time frame required by law.
Hope this will be useful
Reward points if helpful to you.
Bye
Anil

Application error occurred during the request procession.

Hi all
i am geeting this error when i am ruuning my JSP page through NWDS.
Application error occurred during the request procession.
Details: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error compiling [/InvokeProxy.jsp] of alias [ProxySenderWeb] of J2EE application [sap.com/Refrence].
Exception id: [001279D06B4E00C6000027C700002DFC000445047AAE5AD8]
Thanks in advance

Dear Kunnal,
Please share your solution with the community.
Thank you.

Error: "Application error occurred during the request processing

Hello,
I have successfully installed NW7 CE with MaxDB database. Then trying to logon to NWA/User Admin etc, & couldn't logon. Getting the following error.
I am using Internet exploreer 7
500   Internal Server Error
SAP NetWeaver Application Server 7.11 / AS Java 7.11
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to retrieve client for current request. Causing exception is nested.
     at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:493)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:200)
     at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory$1.checkAuthentication(AbstractClientUserFactory.java:151)
     at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:214)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:713)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:237)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
     at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
     at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: com.sap.tc.webdynpro.services.cal.core.exceptions.WDClientException: Found no client: clientNameReqParam=null, clientNameAppParam=null, useragent=Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
     at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.findClientContainer(ClientInspector.java:212)
     at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.getClient(ClientInspector.java:104)
     at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:491)
     ... 51 more
Checked hostname resolution, check any network issues...everything looks good. Suggest a solution.

It's a problem with the browser.
Please try the following possiblities:
- use a different browser or at least a different IE-Version
- restart the problems (helped me several times)
- try comptability view in IE
Regards
Adrian

Application error occurred during request processing TRIAL EmployeeAddressD

I ve the NW Java Trial which is chipped with a demo scenario.
When I try to test this service:
Service: EmployeeAddressData
Test: getAddressByPersonalID_R (String personalid)
I'm runing into:
Result:
Application error occurred during request processing.
Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
Exception id: [000C2980205100660000001900000F1D00044B2662750D88]
In the netweaver portal itself the user gets the following information when trying to access its data:
com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document' User not found in HR: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document'
Any ideas on how to solve this or how to get an error msg, which has more information?
Edited by: Deniz Kesmen on Apr 18, 2008 5:52 PM

Hi Deniz Kesmen
Did you got the solution of the above problem?
I am also getting the same type of issue while executing the webservice for a BRM rule from a webdynpro java application.
I am using adaptive web service model for executing the webservice. Error is given below:
com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://LT-ENTITPCONSAJ.s1.ms.unilever.com:50000/testrule/testrulePort?wsdl&mode=ws_policy' with operation 'invokeRules' in interface 'testrulePortType'
I am using CE 7.2 system.
If I execute the web service from wsnavigator it works fine.
Appreciate for you help.
Regards
Sajith

Application error occurred during the request processing-notes 1507568

Hi,
We have a serious issue with my PI proto system. The issue is the Admin team has applied Notes 1507568 for 7.11 SP4. After that the system seems to be unavailable. I am now not able to access any ESR,ID, RWB and SR.
When i am trying to open that i am getting an error like,
Error: "Application error occurred during the request processing."
Details: java.lang.NullPointerException
     at com.sap.bc.proj.jstartup.sadm.ShmWebSession.findSession(ShmWebSession.java:299)
     at com.sap.bc.proj.jstartup.sadm.ShmWebSession.findSession(ShmWebSession.java:333)
     at com.sap.engine.session.runtime.http.HttpRuntimeSessionModel.activateShmSlot(HttpRuntimeSessionModel.java:341)
     at com.sap.engine.session.runtime.http.HttpRuntimeSessionModel.beforeActivate( Looks like a security patch. We have some serious developments to be done ASAP.
Could some one help me to fix this issue?
May be you people can help me to doing the roll back to the security notes that we applied?
Thank you very much in advance.
Best Regards,
Prasad.
Edited by: PrasadBabu Koribilli on Jun 15, 2011 4:23 AM

Hi,
I face exactly the same problem after an upgrade of the component SERVERCORE04P_32 on Windows. This patch works well on Linux, did you find a solution?
Thanks,
Anne-Lise

Application error occurred during request processing.

Hi, I got the following error when you invoke a method of a web service deployed on my local server
Details:com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
Exception id:
I don´t have any compilation errors in the Java source code published by the Web service.

Hi Sumit,
thanks for the quick reply. I get only these lines when i execute webservice.
500 Internal Server Error
Application error occurred during request processing
 Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
 Exception id: [0016355ABDF800580000016F00002C7800043D23C1985713]
If required i can send my code...
thanks,
sudhir.

Application error occurred during request processing webdynpro

Hi all,
I have developed one sample web dynpro application( welcome). when was deploying the welcome application on the j2ee engine using NWDS. It is giving the fallowing error i.e.
500 Internal Server Error
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'local/Welcome' since it is not of a Web Dynpro object.
Exception id: [02004C4F4F50005C0000000A0000091800042D3A2DDDDEDB]
Please help me how to deploy this application successfully.
Regards,
Deviprasad.

Hi Deviprasad,
Check out this link
Re: Internal Server Error 500
Regards,
Prateek

Application error occurred during request processing. in Netweaver 2004s

Hi
I am facing the following error when I am try to open Netweaver Administrator(nwa)
using following URl
http:<serevername>:50100/nwa
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Found no client for parameter: null, useragent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.2; .NET CLR 1.1.4322)
Exception id: [00145E186CB7007300000017000015FC0004242617536888
System landscape
Netweaver 2004s/ windows 2003/ MaxDB
Thanks and Regards
Ravindran

Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Found no client for parameter: null, useragent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.2; .NET CLR 1.1.4322)

Do you use the new IE 7 ?
If so please try to open the NWA with the IE 6 - perhaps it helps.
Regards,
Norman

Application error occurred during request processing. TCODE - RSPLAN.

while running the BI Integration Planning When i Click Start Modeler I am getting this error described below
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'sap.com/biplanworkbench1' and application 'Modeler' are not deployed on the server. Please check the used URL for typos.
Exception id: [001125C534B000480000001C000C90C20004261894A9684E]

still getting the same problem
I Have gone through the note no 919850 it says that
In particular, check the version of the BI-REPPLAN and BI-WDALV
software components.
and i have checked these component are not there
now question is how to install these component.
and if that gona really help
another point which i have check is
To do this, use the test function in the Web Dynpro Content
Administrator for JCo connections. The following settings are required
for the two JCo connections BI_METADATA and WD_ALV_METADATA_DEST
when i go to maintain jco connection there is no jco connection at all it is completely blank there

ERROR! The following error occurred during request processing:build contro

Hi,
I am unable to request activation. Please help. It is a serious issue. following is the message.
public part "default" of component "sap.com/servlet" ... OK
 [PP "default" of DC 108 variant "default"][SC 623][last successfull build: 779]
 public part "strutsComp" of component "boc.com/struts" ... OK
 [PP "strutsComp" of DC 186 variant "default"][SC 621][last successfull build: 913]
 public part "default" of component "sap.com/com.sap.mw.jco" ... OK
 [PP "default" of DC 59 variant "default"][SC 623][last successfull build: 779]
 public part "log4jComp" of component "boc.com/log4j" ... OK
 [PP "log4jComp" of DC 188 variant "default"][SC 620][last successfull build: 779]
 public part "default" of component "sap.com/activation" ... OK
 [PP "default" of DC 34 variant "default"][SC 623][last successfull build: 779]
 public part "default" of component "sap.com/mail" ... OK
 [PP "default" of DC 99 variant "default"][SC 623][last successfull build: 779]
 public part "strutsAss" of component "boc.com/struts" ... OK
 [PP "strutsAss" of DC 186 variant "default"][SC 621][last successfull build: 913]
 public part "log4jAss" of component "boc.com/log4j" ... OK
 [PP "log4jAss" of DC 188 variant "default"][SC 620][last successfull build: 779]
 Synchronize used libraries... finished at 2007-12-19 12:16:21.792 GMT and took 3 s 625 ms
Prepare build environment in the file system... finished at 2007-12-19 12:16:21.792 GMT and took 9 s 609 ms
===== Pre-Processing ===== finished at 2007-12-19 12:16:21.792 GMT and took 10 s 515 ms
===== Processing =====
BUILD DCs
 "boc.com/partnernet" in variant "default"
 Build failed! Unknown error
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:build controller process has terminated. cannot proceed with build
build controller process has terminated. cannot proceed with build
REQUEST PROCESSING finished at 2007-12-19 12:16:27.917 GMT and took 16 s 671 ms
Regards

Hi Sumit,
thanks for the quick reply. I get only these lines when i execute webservice.
500 Internal Server Error
Application error occurred during request processing
 Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
 Exception id: [0016355ABDF800580000016F00002C7800043D23C1985713]
If required i can send my code...
thanks,
sudhir.

Automatic Request Processing in ODS?

Hi Guys,
Can any one tell me what is the functionallity of Automatic Request Processing in ODS manage screen & in which scenario is used?
Thanks in Advance
Urs,
RK

HI,
Before you can use an ODS object as a data source for another ODS object or InfoCube, you have to make sure that the data is of good quality, and that it is active in the system. You can only activate the data if you have not switched on the option for the automatic processing of the request in the ODS Object Maintenance SAP recommends, however, that you only use the automatic subsequent processing option occasionally.
To simplify the process, SAP also recommends you use process chains. Process chains ensure that one process has ended before any subsequent processes are triggered.
Look into these..
http://help.sap.com/saphelp_nw04/helpdata/en/a9/49453cabf4ef6fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/91/270f38b165400fe10000009b38f8cf/frameset.htm
GTR

MoC process in SAP

Hi Expert,
We would like to ask for MoC process in SAP PM. Do this process is exist in your previous SAP PM projects?
Basically, Management of Changes (MoC) covers engineering/fabrication activities for certain equipment that considering safety and accident prevention program.
Main process flow as follow:
Initiator Request > First Review > Detailed Evaluation > Selection and Approval > New Limit/Process Update > Notification > Implementation > Follow up
Steps:
1.Initiator request a certain equipment to be modified (e.g. increase motor specification)
2.Request is reviewed by management, engineers, safety dept., other related party.
3.Identify and create new process safety to support the changes
4.Notification is created to socialize the changes and approved by involved party
5.Implementation of changes
6.Conduct follow up action to maintain the changes
Do you have some perspective or input? how can we do this on SAP? could anyone share some knowledge form previous SAP PM projects?
Thanks
Rgds,

Leni,
This can be done via a notification utilising user-statuses:
Steps:
1.Initiator request a certain equipment to be modified (e.g. increase motor specification) Create notification
2.Request is reviewed by management, engineers, safety dept., other related party. Add tasks for approval from the various departments. Each task is completed by the approver
3.Identify and create new process safety to support the changes New tasks added for work to be done
4.Notification is created to socialize the changes and approved by involved party tasks processed as required
5.Implementation of changes As above
6.Conduct follow up action to maintain the changes Additional tasks added as required

Want Accounting Entries for Sales Cycle and Procurement Process in SAP

Hello Gurus,
Can some one kindly send me the accounting entries happens during Sales Cycle and Procurement Process in SAP.I will be very helpful if i get this by Friday ( tomarrow).Its a request.
Thanks,
B
Moderator: Read and respect the rules of the forum

You can visit the following link.
http://www.sap-img.com/financial/inventory-accounting-entries.htm
Also, before posting here, you should do a search in here or in Google. You would get most of your answers by searching in Google or any search engine.
One more thing. Timelines are not permitted in these forums.
Cheers,
Ravi.

Request process in SAP

Similar Messages

Maybe you are looking for