Request(recommendation) : making a function of driving mode for safety.

The function of DRIVING MODE must be a useful function which can make response by sending a automatic return massage from MSG or calling during driving a car. I believe this function helps us to be safe!!! :-)

The only reason you could be unsafe if you receive a message or call whilst driving is if you read it or reply to it whilst driving. The simple solution is don't do that.
Having the phone send an auto-reply will not change how safe you are.

Similar Messages

Turning off the Driving Mode Announcement.

I turned on driving mode on my Lumia 928 and now everytime I get into the car it announces: "I have turned on Driving Mode for you."
It has become real tiring. How do you turn it off??? I have searched with no luck, please help.
dwf1234

Hi, dwf1234. Welcome to the Nokia Support Discussions. Upon checking, the Driving mode will automatically be enabled once the phone is connected to the added Bluetooth device when driving.
For more information about this feature, you may visit this article:
http://conversations.nokia.com/2014/01/21/stay-safe-windows-phone-driving-mode/

Request number of a function module.

Hi Experts,
Can anybody plz send me the table where the request number of a function module get stored.
(Function groups are stored in E071,But i need the request number for function module.)
If any function module for the same plz send it
Regards,
Anoop Chandran

Hi Martin,
My scenario is ;
i have 2 fn modules
Fn mod1 and Fn mod2 in fn group A
and i transported this to another server.
now i changed fn mod1 and transported.
so the request number of fn mod 1 get changed.
So my req is to not based on fn group.
And it depends on fn modules.
Can u plz gv me some idea to get the request number (tables or fn mods) of fn module??
Regards,
Anoop Chandran

Request: AHCI/IDE controller mod for MSI EX610 BIOS v.3.09

Hoping to eliminate my windows 7 installation problem mentioned in https://forum-en.msi.com/index.php?topic=141925, I would like to request an AHCI/IDE and SATA controller (are they the same???) mod for MSI EX610 (latest BIOS Version is v.3.09), like the one that had been previously done for EX600:
Quote from: Svet on 28-May-09, 21:04:10
Purpose of the MSI EX600 Notebook 5.09 BIOS Mod:
* Rebuild option to control Sata controller mode per user request: http://forum-de.msi.com/index.php?page=Thread&threadID=90392
Would it be too much to ask to have swapped Fn/LCtrl buttons at the same time? (would it be possible to build this on the previous mod you've already done to swap Fn/LCtrl keys of EX610 at https://forum-en.msi.com/index.php?topic=123070.0 ?
Quote from: Svet on 31-December-08, 02:18:09
Purpose of the EX610 3.09 BIOS Mod:
* Reverse/swap the notebook keys functions of the "Fn" key with Left "Ctrl" key.
{E.g "Fn" key will act as "Ctrl" key, and "LCtrl" will act as "Fn" key}
Thanks for all your help and support.
Donated as requested.
Best wishes

Quote from: Bas on 02-October-11, 03:44:06
AHCI/IDE is not an issue in this, Windows7 supports both.
The shutdown must have some other reason.
Vista was working beautifully on this machine. It has to be some driver /BIOS issue. Can however someone send me the modified BIOS, just to make sure. I would be very thankful.
Also, might be I need to preload some drivers for Windows7 to be able to finish smoothly? If so - were I can get the chipset drivers for Win7/Vista?
I still assume that as the original poster disappeared after he got the modified BIOS, his problem was solved with that.
Would be very thankful for any help.

Passing request table to Jco function

Hello Experts,
We have one requirement where we need to pass the table data from the BLS to SAP Jco Function Module call. For example we are reading the material numbers from the oracle database and then we need to pass these material numbers to SAP Function Module as a table to read the further details from SAP for the given material numbers.
We wrote a custom function module in SAP which accepts the material number as table. Is it possible to pass the table request parameter to Function Module? If possible how can we do this? I tried to pass the XML document to Function Module table, but no luck.
Thanks
Mohan

Mohan,
in the BLT, configure the JCO action to use you custom function. After pressing enter, MII reads the xml structure of the function (if the connection MII to SAP is working). In the further processing of the BLT, you can fill the RFC table which you can see in the link editor using your query results and the link editor types "AppendXML" or "AppendAfter".
The following thread might help: [RFC call with multiple input|http://forums.sdn.sap.com/click.jspa?searchID=34070350&messageID=8134561].
Michael

Call function in debug mode

Hi,
when I´m on the test function screen of se37, I can run the function in debugging mode and it´s starting with the debugger on the first code line.
Is it also call a function from a report in this debugging mode?
thank you!
reward points guaranteed

Thank you for your answers...
Let me explain a little bit more in detail, what I want to do.
I have an XML interface function which is going to be called by an
external application about RFC, reading binary data,
interpreting that as XML and doing something in the SAP system afterwards.
As the system is a 4.6C I can´t debug externally, I want to provide
a debugging function in a monitoring application for that.
As people are using the monitoring, which are not familiar with all
the code behind that, I want to start the debugging mode by myself,
without setting a breakpoint.
Let me describe it like this:
When you type in /H in the transaction field in the SAP menu bar, the
debugging mode is going to be started for further actions.
All I want to do is starting that /h debug mode without typing anything
in the transaction field, just inside of the report.
How can I do that?
Michael

LabVIEW 6.0.2 Compund Arithmetic function in XOR mode Inverted generates Compiler error when file saved

I am posting this as a problem for NI to look at.
I am using the Compund Arithmetic function in XOR mode Inverted with 5 inputs. File is also set up in reentrant mode. When I attempt to save the file I get the following error:
Compiler error. Report this problem to National Instruments Tech Support.
int inv mode=0x40000
Advertising Section:
Alliance Member
William Simmons
Simmons Software Engineering, Inc.
714 Germantown Pkwy Ste 5-341
Cordova, TN 38018
(901) 679-3513
[email protected]
LabVIEW, TestStand, Automated Test
environments, On-Site, Off-Site
Attachments:
NXOR_error.vi ‏73 KB

XOR is a new addition to compound arithmetic node. LabVIEW developpers just overlooked the fact that the outpout could be inverted. The compiler fails to generate the proper code because the inversion is not expected.
Just do what the message says. Report the problem to NI Tech Support (and use a separate inverter node).
LabVIEW, C'est LabVIEW

Function Based Index MOD(column_name,8)

For a function based index (MOD(column_name,8), the query is not using it. Do anyone have a solution to it? The table is having millions of rows.

Oracle only uses indexes if the number of returned rows is less than (i think) 4%. In your case the number of rows is 12,5% so Oracle will never use this index unless you force it

ITSM Service Request - Assigning Categories - Using Function Module

Hi,
We are trying to create an ITSM service request ticket from ECC, based on a workflow and its logic. I am calling a remote function module which will contain the logic as explained below.
I am creating a CRM ITSM service request(incident) ticket using function module CRM_ICSS_SRVREQ_CREATE.
The ticket is created but some of the fields that I need to populate in the transaction do not have an interface in this function module. I want to specify the category 1, category 2 and category 3.
I tried function module CRM_ORDER_MAINTAIN but I am unable to find the interface where I can populate this particular data. The component used here is btcategories/categories.
Can anyone suggest where this particular data needs to be populated.
Thanks,
Abdullah

Hi Abdulla
What parameter did you set for "Reported By" and "Message Processor" in the FM CRM_ICSS_SRVREQ_CREATE. I am having a lot of problems regarding this. Can you please help?
Thanks
Saumyendra

3702 Support full functionality in Autonomous Mode

Does the 3702 , 2702 and 1702 support full functionality in Autonomous mode? i know there was a limited Site Survey function but wondering if they have added full function for these APs?

Yes it does and also check the table below , both firmware are shown LAP and Autonomous for supported APs including 3700 series.

Voice Commands Like Unlocking Phone or Driving Mode

Hey everyone,
Is there a way to unlock the phone with a voice command? Or, perhaps is there a driving mode to use voice commands while driving?

Don't know about that,maybe with a smartwear accessory using some kind of application (from SW3 I believe) but I am not sure.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Request: BIOS/EC mod for EX300

Hi there,
I have the 1.06 Bios/EC versions installed on my EX300. I am interested in finding a mod which will allow swapping the Fn/Ctrl buttons.
Thanks,
dtan

Quote from: roelm12001 on 12-March-11, 20:21:07
sir please send me the BIOS/EC mod for EX300. thanks in advance!
Hello,
The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
Once done, the request will be e-mailed to you [up to 24 hours max]
Best Wishes,
Svet

Can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion? The MFP can be either 3-in-1 or 4-in-1 i.e with fax

can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion?
The MFP can be either 3-in-1 or 4-in-1 i.e with fax

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

Request: Bios mod for GT60-ONC 16F311 unlock

Hi i would love to have a mod for this laptop GT60-ONC 16F311 so i can enable and disable options and overclock manually and push the ram a little futher.
My current BIOS is,
BIOS :E16F3IMS.10M (there is a raid version but i dont have raid)
EC version : 16F3EMS2 ver 4.05
Hope someone can help me with a unlocked ROM so i can use all options in the BIOS.

Oh ok shame that there is not more possible ,such disable throttle and that kind of stuff but thx for your fast reply , and as soon there is a possibillity then i am the first who want it.
Would love to play a little with this computer but since all is locked then there is not much option.

How do I troubleshoot Flash Player's protected mode for Firefox?

Starting with Flash Player 11.3, a protected mode was added as a new security enhancement for Firefox 4.0 and greater on Windows Vista and higher. This security enhancement is designed to limit the impact of attacks launched from malicious Flash content (SWF files). For additional details on this feature, please see Inside Flash Player Protected Mode for Firefox
After reviewing this FAQ, we'd appreciate if you would take a minute to let us know if it helped. There is a link to a two question survey at the bottom of the page.
While we believe this feature is fully tested and reliable, if you encounter issues with Firefox we recommend the following troubleshooting steps.
Problem: Flash content does not appear, YouTube display errors such as "An error occurred. Please try again later.", or Flash video will not function properly.
Solution: If RealPlayer is installed on your system, please disable the RealPlayer Browser Record plug-in.
Launch RealPlayer
Click the RealPlayer icon in the upper left corner of the window and choose Preferences.
Choose Download & Recording from the left hand panel
Uncheck "Enable Web Download & Recording for these installed browsers"
Click OK and close RealPlayer
Restart Firefox
If you are viewing this page in Firefox and Flash Player is not working, please click here for an HTML5 version of this video: YouTube HTML5 HD Link
Problem: RealPlayer is not installed, Flash Player crashes in Firefox
Solution:
Troubleshoot Extensions and Add-Ons by launching Firefox in Safe Mode
1. Exit Firefox
2. Click Start > Run
3. Type the following then press [Enter]:
firefox.exe -p
4. Click Continue in Safe Mode
5. Attempt to reproduce the problem
If the problem does not occur in safe mode, please try to isolate it down to an individual plug-in.
1. Exit Firefox
2. Re-launch Firefox
3. Click Firefox > Add-Ons > Extensions
4. Click Disable on all of your extensions
5. Attempt to reproduce the problem, while enabling each extension until you can reproduce the issue
If the issue persists in Safe-Mode, please continue with the steps below:
Some users have indicated that random crashing stops when clearing their Firefox profile. This step will allow you to temporarily test with a clean set of Firefox preferences, without losing your preferences.
Exit Firefox
Click Start > Run
Type the following then press [Enter]: firefox.exe -p
Click Create Profile
Click Next
In the Enter new profile name dialog, type "Test"
Click Finish
Select Test and click Start Firefox
Use Firefox as normal. If the problem goes away, clearing your Firefox preferences, or migrating the important settings (bookmarks, etc) to a clean Profile may be a good permanent solution.
If the problem persists, switch back to your old profile by doing the following:
Exit Firefox
Click Start > Run
Type the following then press [enter]:firefox.exe –p
Choose your old account (typically "default")
Click Start Firefox
Solution: Try a clean Windows profile (You must be an Administrator to complete this step. If your user account is not an admin type, skip to the next section for instructions on reporting a bug.) Creating a new Windows user will rule out any account-specific preferences that may be enabled on your system.
Create a user account in Vista
Create a user account in Windows 7
Use Flash Player normally. If the problem goes away, this indicates a compatibility problem, either with software you have installed or with preferences set on your account.
Reporting a bug:
Please file bugs at bugbase.adobe.com.
Choose "Adobe Flash Player" as the product
Choose "Browser Integration" as the product area
Please provide as much information as possible with what you were doing before the crash and an exact URL where the crash occurred.
If available, please attach your Firefox crash logs to the bug using the Attachments field.
Show hidden files and folders. For more details, see the instructions for the operating system that you use: Vista and Windows 7.
Crash logs are located at C:\Users\username\AppData\Roaming\Mozilla\Firefox\Crash Reports\
Logs will be located in either the pending or submitted folder, depending on whether or not you submitted the crash report to Mozilla.
Last resort
Finally, if these problems are blocking you from using Flash Player we recommend, as a last resort, you either revert back to Flash Player 11.2 or temporarily disable Protected Mode. We strongly recommend that Protected Mode is manually enabled once this issue is resolved.
To revert to a previous version of Flash Player, please see this FAQ: How do I revert to a previous version of Flash Player?
To disable Protected Mode, add the following line to your mms.cfg file located in:
Windows 32bit: C:\windows\system32\macromed\flash
Windows 64bit: C:\windows\syswow64\macromed\flash
ProtectedMode=0
If the mms.cfg file does not exist, create one using any standard text editor (e.g.. notepad)
Depending on your operating system, you might need to first save the mms.cfg file to a writable location (such as your documents or desktop folder) and then copy the file into the destination folder using Windows Explorer.
To re-enable Protected Mode, simply remove the line from the mms.cfg file.
Hopefully this FAQ helped you. Please let us know by taking a minute to fill out this simple survey.
Did this FAQ help?

Please ask your question on a forum for the Flash Player

Request(recommendation) : making a function of driving mode for safety.

Similar Messages

Maybe you are looking for