Request sending client to client with in single server

hi
i have created one request, how do i transport this request from one client to another client within the same server
i have created already 200 and 300 clients, now my question is , how to transport this customises request from 200 to 300 client in the same server..
Rgds
Soumya

hi
in SCC1, I entered 200 client in source client , i selected request then it showing error that is source client is same as the logon client..how to proceed on..
Rgds
Soumya

Similar Messages

Read Dictionary Meta Data with a Single Server Connection

Hello,
I've Enterprise Portal 6.0 SP4 NetWeaver Stack 2 Developer Workplace Sneak Preview from https://www.sdn.sap.com/sdn/downloads.sdn running on my computer and implemented the Tutorial: "Creating A Web Dynpro Application Accessing ABAP Functions" from https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD4_AccessingABAP.htm.
During the setup of the JCo Conneciton for the WD_FLIGHTLIST_RFC_METADATA_DEST in the Web Dynpro Content Administrator in Step 3 I came across the problem that I can not use a Single Server Connection to read Dictionary Meta data.
So my Question: Why is it not possible to read Dictionary Meta Data with a Single Server Connection?
Regards
Gregor

Hi Ruth,
Thanks for the guideline.
I entered an entry in the etc/service file on the m/c which is having SAP WAS 6.40 J2ee installed.(let say ip address 172.16.1.38)
for e.g.
sapmsSA1 3600/tcp
I restated the webAS server.
Then from SAP GUI when i am connecting to SAP R/3 backend system and checking the 'smlg' transaction.....i can see 3 Logon groups with the same name 'PUBLIC'.
Now i have created the BC Message server connection in SLD with this information.
caption - SA1 01
Message server IP = 172.16.1.242
port 3600
After that i specified this message server information to WD_MetaData connection in JCO content administrator.
When i tetsed this connection it gives me error as follow.
com.sap.mw.jco.JCO$Exception:(102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
connect_PM TYPE=B MSHOST=172.16.1.242 GROUP=PUBLIC R3NAME = SA1 MSSERV=sapmsSA1 PCS=1 LOCATION CPIC(TCP/IP)on localhost with Unicode ERROR partner not reached(host 172.16.1.38,service sapgwoo)
connection refused
can u guide me what i am missing?
Thanks,
Mital.

Getting 10.4 clients to authenticate with 10.5 server

I have a couple of older G4 clients running 10.4.11. I am trying to get them to use my 10.5 server for authentication and automatically mounting users' home directories. I can't seem to get it to work. All my 10.5 clients work fine. I am guessing a schema differences between 10.4 and 10.5 but don't know enough about LDAP to make an educated guess.
I have used Directory Access to configure LDAPv3 and configured the client alternately to use both "from server" and "open directory server". It appears that I have no trouble binding to the server but authentication does not work afterwards. Symptom is that I type in a valid username and password at the login screen, I get the pause like it is waiting for a response to the query (beachball), and then the "shake" about 15 seconds later.
I would think that there is an article somewhere that says, "here is how you make your 10.4 clients work with a 10.5 server," but searches using various keywords hasn't produced the desired result.
Thanks in advance.
Brian Lloyd
Granite Bay Montessori School

Well, I unbound the clients and that did not immediately solve the problem. However, I rebooted the server and now all the 10.4 clients (once unbound) are authenticating just fine.
Thank you for pointing me in the right direction.
Brian

Send email from OWB with authenticated SMTP server (AUTH_LOGIN)

Hi all,
I want to send email from Oracle Warehouse Builder 11.2.0.2 using a SMTP server with basic authentication (AUTH_LOGIN).
I've created an ACL for OWBSYS user according to note ID 1229769.1 in support.oracle.com.
But, I need to configure again the ACL to connect to the SMTP server using user and password.
I read the article in metalink, *How to Send an Email Using SMTP over an SSL Connection [ID 1323140.1]*+
but I don't know how can I configure again the ACL for use in OWB.
How OWB is able to authenticate with the SMTP server?
Thanks!
Maximiliano.

Duplicate -
How to send email from OSB with Mail server that requires SSL or STARTTLS
Regards,
Anuj

How to setup SMBX client for work with Windows 2003 server's shared folders?

Dear community,
Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
How should I set up SMBX? Is there manual?
I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
Thank you in advance

Hi,
Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Manual steps to clear the records.
Dnsmgmt.msc [Dns Management]
A.Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
B.Expand the forward lookup zones\domain.com folder
i.Delete Host(A) records of dc’s which are non-existant.
ii.Correct the NameServer (NS) records
iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
· Dssite.msc [Sites and Services]
A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.Delete incorrect subnet configurations [Sites\Subnets]
C.Delete incorrect site links [Sites\IP]
· Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
· Force replication – ‘repadmin /syncall’

Will Windows Outlook clients be happy with Snow Leopard Server Mail Server?

Our network at work has a Windows SBS 2003 server - and 40+ XP PCs running office 2003 (and outlook 2003).
Can I set up Snow Leopard Server so that the Outlook 2003 clients will be able to use contacts, calendars and mail etc from the mac (mini) that we would purchase for this?
I'd love to get everyone on Mac here, but we can't cos our core application is windows only and we would still need the MSSQL server. I know - we could install parallels or virtualbox for the windows apps but that is extra expense, and tbh I don't think our users could cope.
Thanks

Hi
+"Can I set up Snow Leopard Server so that the Outlook 2003 clients will be able to use contacts, calendars and mail etc from the mac (mini) that we would purchase for this?"+
For mail yes. For calendars you will need 'assistance' using 3rd-party applications or helper utilities. The iCal Admin manual has more details of what is available:
http://manuals.info.apple.com/enUS/iCalServerv10.6.pdf
Page 12. For Addresses/Contacts consult the Address Book Server Admin Manual for more details:
http://manuals.info.apple.com/enUS/AddressBkServerv10.6.pdf
Page 12. I don't see anything specifically listed so you may have to search for these yourself unless someone else posts with something more specific that works?
If you're expecting Exchange-like functionality you will be disappointed. If you really must have the functionality you're used but also want to move to the mac platform a better prospect (IMO) would be Kerio Mail Server:
http://www.kerio.com/connect
Depending on what other services you may or may not want you may not necessarily need OSX Server? Then again you could as easily install KMS on a Windows or Linux box instead. In which case why swop from Exchange?
Tony

Workfolders on single server

Hi everybody.
I'm new here so please be kind to me.
I have a question regarding the use of work folders. I have a single server running on windows server 2012 R2 essentials and am using the remote web access functionality. I tried to install work folders as it seams like an really good functionality. i changed
the port for work folders to resolve conflict with IIS which is running the remote web access and multiple websites/apps as discribed in: (I changed it to port 1201 for https trafic)
http://blogs.technet.com/b/filecab/archive/2013/10/15/windows-server-2012-r2-resolving-port-conflict-with-iis-websites-and-work-folders.aspx
I can make an sync space in the server manager. But however when I try to use the workfolders on an windows 7 machine I run in to problems. I use the webadress https://<xxx.remotewebaccess.com:1201 (the name provided by microsoft when setting up
remote web access.
The client PC fist shows "Retrieve work data. Finding you data on the work folders server" and it looks like it goes OK. But than an error appears. "There was an error finding your Work Folders server. The operation timed out (0x80072ee2)".
I looked trough a lot of documentation regarding work folders and I am thinking it might be some problem regarding not having an reverse proxy. I read:
http://blogs.technet.com/b/filecab/archive/2014/03/03/deploying-work-folders-with-ad-fs-and-web-application-proxy-wap.aspx
This tutorial discribes the use of AD FS and web application proxy. But this setup requires multiple servers. I only have one server. Is there an way of using work folders (maybe there is an tutorial for this?) to use work folders with an single server (using
windows server 2012 R2 essentials with remote web access functionality) without the need to install AD FS and the web application proxy? Maybe with use of other reverse proxy software?
Any help would be greatly appreciated.

Hi,
Based on your description, please refer to
Michael‘s reply in Comments in following article. It seems that this issue was the same as Michael described.
Windows
Server 2012 R2 – Resolving Port Conflict with IIS Websites and Work Folders
Meanwhile, please refer to following article and check if can help you.
Step-By-Step:
Creating a Work Folders Test Lab Deployment in Windows Server 2012 R2
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Struggling with Send XML to client

Hi,
I am using WL Process Integrator 2.1 with WL 6.1.
I am trying to do do an example of the "Client Call Addin Response DTD" i.e. pass
an XML document to an external java
program.
As given in docs :
http://e-docs.bea.com/wli/docs70/devclient/appa.htm#1120726
1. I have created a template definition
2. Defined a XML doc. (as per the Client Callin Request DTD) and attached to ActionSendXMLToClient
event as shown below.
<call-addin name="mywlpi.addinimpl" mode="async">
<actionid>959395846210</actionid>
<parm>itemNumber</parm>
</call-addin>
3. "mywlpi.addinimpl" is a java program I created
4. Now, the problem I run into is when I run from Worklist (Swing client program),
it errors out saying it cannot find this
class file:
ClassNotFoundException: mywlpi.AddInImpl
java.lang.ClassNotFoundException: mywlpi.AddInImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
5. I have included the class file in a .jar and included in the
SVRCP of startWebLogic.cmd file. Also, when I create a Business
Operation from Studio, I can locate this Java class. So, I am
not sure what is missing. The strange part is when I run from the
Worklist JSP page, it errors out saying :
"Cannot execute this task, because it is already done." The task
is not yet done.
Is there someone who can help me here? Any suggestions
appreciated!!
Thanks,
SLN

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Error while sending request to Webservice from Client app on Weblogic

Hi Everybody,
As part of web service development and deployment, I created one simple webservice and tried to deploy it on Apache Tomcat 5.5 and then weblogic 9.2. It worked fine on Apache Tomcat but it didn't work on Weblogic. Here are the steps I followed.
1) Created a webservice within one Dynamic Web project
2) Created a Client application
3) Deployed both (by exporting war files from eclipse3.2) on Tomcat Apache locally on the same machine (localhost)
4) Invoked client in the browser which allows to send simple request (Hello!) to Webservice
5) Invoked webservice method call from the Client browser window
6) Received success response back from webservice.
Then, I deployed same war files on Weblogic 9.2 (different machine on the network)
- Both got deployed successfully and reached to ACTIVE state on Weblogic and became ready to accept requests.
- When invoked Client application on the browser, it worked.
- From that client application browser window, I tried to invoke webservice call, I got the exception as below:
exception: java.net.ConnectException: Connection refused: connect
I will greatly appreciate any advice on this. Let me know if more information is needed.
Thanks in advance.
Gaurang Prajapati

Have you given the correct ip or machine name in the client?

Java Server/Client Applicaton - problem with sending data back

Hello!
I'm trying to write a small server/client chat application in Java. It's server with availability to accept connections from many clients and it's app just for fun... However, I've come up against a huge problem: everything what clients send, arrives to server (I'm sure about that because it is displayed on the Server Application screen) and then server should send it back to all clients but it doesn't work. I have no faintest idea what causes this problem. Maybe you can help me?
Here is my server app code:
import java.net.*;
import java.util.*;
import java.io.*;
* @author Robin
public class Server {
    ServerSocket serw = null;
    Socket socket = null;
    String line = null;
    Vector<ClientThread> Watki = new Vector();
    ClientThread watek = null;
    public Server(int port) {
        try {
            serw = new ServerSocket(port);
            line = "";
            while(true) {
                System.out.println("Running. Waiting for client to connect...");
                socket = serw.accept();
                System.out.println("Connected with:\n" + socket.getInetAddress() + "\n");
                watek = new ClientThread(socket);
                Watki.addElement(watek);
                Watki.firstElement().Send("doszlo?");
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public void sendToAll(String s) {
        for(int i = 0; i < Watki.size(); i++) {
            Watki.elementAt(i).Send(s);
    public class ClientThread extends Thread {
        Socket socket;
        DataInputStream in = null;
        DataOutputStream out = null;
        String line = null;
        public ClientThread(Socket s) {
            try {
                this.socket = s;
                in = new DataInputStream(s.getInputStream());
                out = new DataOutputStream(s.getOutputStream());
                start();
            }catch (IOException e) {
                System.out.println("BLAD: " + e);
        public void Send(String s) {
            try {
                out.writeUTF(s);
            }catch (IOException e) {
                System.out.println("BLAD: " + e);
        public void run() {
            try {
                line = "";
                while (true) {
                    line = in.readUTF();
                    System.out.println(line);
                    sendToAll(line);
            }catch (IOException e) {
                System.out.println("BLAD: " + e);
    public static void main(String[] args) {
        Server serwer = new Server(5000);
}And here is client app code:
import java.net.*;
import java.util.*;
import java.io.*;
* @author Robin
public class Client implements Runnable {
    Socket socket = null;
    BufferedReader keyIn = new BufferedReader(new InputStreamReader(System.in));
    DataInputStream in = null;
    DataOutputStream out = null;
    String line = null;
    public Client(String host, int port) {
        try {
            System.out.println("Connecting to " + host + ":" + port);
            socket = new Socket(host, port);
            System.out.println("Connected\nTALK:");
            out = new DataOutputStream(socket.getOutputStream());
            in = new DataInputStream(socket.getInputStream());
            line = "";
            while(!line.toLowerCase().equals(".bye")) {
                line = keyIn.readLine();
                Send(line);
        }catch (UnknownHostException e) {
            System.out.println("BLAD: " + e);
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public void Send(String s) {
        try {
            out.writeUTF(s);
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public void run() {
        String loaded = "";
        try {
            while(true) {
                loaded = in.readUTF();
                System.out.println(loaded);
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public static void main(String[] args) {
        Client client = new Client("localhost", 5000);
}By the way, this app is mainly written in English language (text that appears on the screen) however in functions I used Polish language (for example: BLAD - it means ERROR in English). Sorry for that :)

Yeap, I will change those exceptions later, thanks for advice.
You asked what's going on with it: both applications start with no errors, but when I write something in client side it should be sent to the server and then forwarded to all connected clients but it stops somewhere. However, I added a one line to the server code
line = in.readUTF();
System.out.println(line);
sendToAll(line); and after it reads message from client (no matter which one) it shows that message on the server side screen, then it should send this message to all clients but it doesn't work in this moment. What's confusing: no errors occurs, so it's rather a mistake in my code, but where?
Edited by: Robin3D on Sep 30, 2009 9:07 AM

Cannot send to some receipients with error "550-Please turn on SMTP Authentication in your mail client"

I am using exchange 2003 connected using MAPI with outlook2010.
when i send e-mail to one of my customer.
i got below error message
There was a SMTP communication problem with the recipient’s email server. Please contact your system administrator.
<xxxx.net #5.5.0 smtp;550-Please turn on SMTP Authentication in
your mail client. >
xxxx.net was my server
and my customer was using messagelabs "cluster6a.us.messagelabs.com" to receive mail
i was strange that MAPI connect does not need smtp authentication when send out e-mail.
is that anythings i have missing to do?
thank you

Hello,
Kindly go through with below link.
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_28133927.html
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_28078232.html
Deepak Kotian.
MCP, MCTS, MCITP Server / Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS" with no
warranties or guarantees and confers no rights.

Is it possible to transport requests to 2 QA clients with ChaRM?

Hi
If there are 2 QA clients and requests need to be tranported to both clients at the same time,
can SolMan ChaRM handle this?
Transport route is as follows.
DEV_______QA_______PRD
200___->__300___->_100
______--->__500
Anybody has experience?
My version is SolMan 7.0 SP16
Thank you

hello,
I have the same behaviour in my landscape. Only the systems in the main path is available in SDHF task list
I would say this is normal.
Why is this normal ?
Because the ur.gent correction is to be considered like an emergency process that doesn't superseed the normal maintenance but that complement it to have a faster change in place.
That means the ur.gent transport will follow the normal maintance process anyway
If you miss the ur.gent transport in the other QA client you may schedule the following task in your project tasklist
/TMWFLOW/SCMA_BTCH_SYNC_TEST or online
/TMWFLOW/SCMA_TRIMP_SYNC_TEST
This is not obvious how this is working and I am currently evaluating this solution in another thread
[Is it possible to transport requests to 2 QA clients with ChaRM?|Is it possible to transport requests to 2 QA clients with ChaRM?]
on your side you may also want to evaluate this tasks ?
br
Xavier

Intermittend DNS resolution, timeserver, group policy updates errors in client logs in Win 2012 R2 single server environement

We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
Errors:
Error 1043: Timeout during name resolution request
Error 1129: Group policy updates could not be processed due to DC not available
Error 5719: Could not establish secure connection to DC, DC not available
Occasionally but disappears after a while
Error 134: As a result of a DNS resolution timeout could not reach time server
Symptoms
On Win 7 Clients
Network shares added through Group Policy will not show sometimes
Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
nslookup during the incident returns cannot resolve error
ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
On Win 8.1 Clients
Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
drive shares but usually only for the active session. After logoff / logon the shares are gone again.
The issue does appear to be load related since it occurs even if there are only one or two workstations active.
Server Configuration
Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
Zyxel 1910-48 Port Switch
VDSL 50Mbps Down / 20Mbps Up
Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
Currently only one Network card is active for problem determination reasons.
There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
Best Practice Analyzer Results
DNS server scavening not enabled
Root hint server XYZ must respond to NS queries for the root zone
More than one forwarding server should be configured (although 3 are configured)
NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
set to 3 second.
Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
issues. Any help would be appreciated

Hello Milos thx for your reply.. my comments below
1. What does it "switched"? You may mean migration or new installation. We do not know...
>> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
>> Correct, and I am aware of that
3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
>> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
>> Will post as soon as available
5. I do not use forwarders and the system works
>> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
required apart from that it does work for you that way?
6. DHCP should sit on DC (DHCP on router is disabled)
>> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
7. NIC settings in DC points to itself (loopback address 127.0.0.1)
>> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
>> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
9. Test your system with dcdiag.
>> See result below
10. Share your findings.
Regards
Milos
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
Home Server = GSERVER2
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GSERVER2
      Starting test: Connectivity
         ......................... GSERVER2 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\GSERVER2
      Starting test: Advertising
         ......................... GSERVER2 passed test Advertising
      Starting test: FrsEvent
         ......................... GSERVER2 passed test FrsEvent
      Starting test: DFSREvent
         ......................... GSERVER2 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... GSERVER2 passed test SysVolCheck
      Starting test: KccEvent
         ......................... GSERVER2 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... GSERVER2 passed test
         KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... GSERVER2 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... GSERVER2 passed test NCSecDesc
      Starting test: NetLogons
         ......................... GSERVER2 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... GSERVER2 passed test
         ObjectsReplicated
      Starting test: Replications
         ......................... GSERVER2 passed test Replications
      Starting test: RidManager
         ......................... GSERVER2 passed test RidManager
      Starting test: Services
         ......................... GSERVER2 passed test Services
      Starting test: SystemLog
         ......................... GSERVER2 passed test SystemLog
      Starting test: VerifyReferences
         ......................... GSERVER2 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : GS2
      Starting test: CheckSDRefDom
         ......................... GS2 passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... GS2 passed test CrossRefValidation
   Running enterprise tests on : GS2.intra
      Starting test: LocatorCheck
         ......................... GS2.intra passed test LocatorCheck
      Starting test: Intersite
         ......................... GS2.intra passed test Intersite
Server: gserver2.g2.intra
Address: 192.168.240.6
*** gserver2.g2.intra can't find g2: Non-existent domain
> gserver2
Server: gserver2.g2.intra
Address: 192.168.240.6
g2.intra
        primary name server = gserver2.g2.intra
        responsible mail addr = hostmaster.g2.intra
        serial = 443
        refresh = 900 (15 mins)
        retry   = 600 (10 mins)
        expire = 86400 (1 day)
        default TTL = 3600 (1 hour)
> wikipedia.org
Server: gserver2.g2.intra
Address: 192.168.240.6
Non-authoritative answer:
wikipedia.org   MX preference = 10, mail exchanger = polonium.wikimedia.org
wikipedia.org   MX preference = 50, mail exchanger = lead.wikimedia.org
polonium.wikimedia.org internet address = 208.80.154.90
polonium.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:90
lead.wikimedia.org      internet address = 208.80.154.89
lead.wikimedia.org      AAAA IPv6 address = 2620:0:861:3:208:80:154:89
Final benchmark results, sorted by nameserver performance:
(average cached name retrieval speed, fastest to slowest)
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name   | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
+ Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
+ DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             gserver2.g2.intra
                Local Network Nameserver
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
- Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
- DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns8.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
- DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns7.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
    8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
- Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
- DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             google-public-dns-a.google.com
                 GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
15: 40
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name   | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
+ Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
+ DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             gserver2.g2.intra
                Local Network Nameserver
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
- DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns7.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
- DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns8.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
    8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
- Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
- DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             google-public-dns-a.google.com
                 GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363

How to send message, client to client?

Hi friends,
I would like to send message from form6i to new client.
In OS w2k is works.. but window98 isn't.
HOST('NET SEND 199.19.1.11 MESSAGE'); -- > W2K
HOST('........'); --> W98 ????????
Anybody to know.... ???
Thanks.

I think,
to solve this problem, like you think, is not direct possible.
First, the IP you see on server is not sure the real IP from client. It could be the IP from the ISP or from some Proxy. To solve this problem Servlet use the HttpSession class. This class use either a cookie or the URL to recognize the client.
Second, http protocoll is a stateless protocoll. In one fact this means that the server can't send a message to a client when no request is comming from client!
You have to solve the problem on client side.
My you can solve it like follow:
Write a from that send a request to server.
On server you check the state from your your process. If the process is free, lock the process by set some global variable to lock and proceed the request. If the process is looked anser by sending html with send a message via JavaScript or display it with HTML and use the html metatag to reload some seconds later this page again.
I hope this help you
Regards Dietmar

Server 2012 R2 DHCP Failover - Hot Standby clients not renewing with standby server

In my test network I have a pair of Server 2012 R2 DHCP servers setup for Hot Standby and they will successfully service a client request for a new request.
What I am seeing is that when I test failover the clients will not renew with the Standby server. I have to release first and then renew.
When both DHCP servers are up the state is normal and replication of configuration from the Active to Standby is working. As far as I can tell it is configured correctly.
MaxClientLeadTime is 10 minutes.
StateSwitchInterval is 10 minutes.
AutoStateTransition is set to True.
Adding that manual renews fail with a message stating that it was unable to contact the dhcp server. However if I wait for the lease to expire/auto-renew the dhcp server does indeed change to the standby. Once the primary server comes back up and the state
returns to normal I am able to manually renew.
thanks in advance

Hi,
For test, we let the active DHCP down and the standby DHCP server will take place. But when we renew an IP, client send unicast to the former DHCP
server. That’s why the first request failed.
At 7/8 of the scope lease time, the client moves into a REBINDING state and broadcasts a lease renewal request.
For more information please refer to:
DHCP Failover Examples
http://technet.microsoft.com/en-us/library/dn338973.aspx
Hope this helps.

Request sending client to client with in single server

Similar Messages

Maybe you are looking for