Request showing still running in Monitor after request status is made red
Hi All,
We have a delta load running from an ODS1 to 3 Targets - Cube1, ODS3 and ODS4 through a single delta infopackage. For handling a production data failure, we had to delete the data from these 3 Targets along with the inits. Afterwards we again started the init with data transfer for all the 3 targets simultaneously. The load failed due to processing overdue. Again the inits were deleted for all the requests but during the next day loading we suddenly found the same requests in the 3 Targets with yellow status showing as running. These requests were already changed to red in QM status and the inits were deleted. But can anybody explain how come they again reappeared ?
This question is really intriguing.
Thanks
Somnath.
Hello somnath,
those request are submitted to batch, and they are still alive somehow even if you delete those requests or change them to red. And again tries to load data to providers and if no request available creates new ones.
What can you do?
1. Try to delete those jobs from the queue.(It's not possible for every request unforntunately)
2. Delete the content of provider by using right click on the provider and choose delete data.
Sarhan.
Similar Messages
-
Active Users Request is still running for hours in Release 12
Hi Friends,
Today I have installed the Release 12 in the Red Hat AS 4.0. Installation was successfull.
All the Concurrent Managers are up and running.
I have run some requests in the Paybles, Receivable..
Requests are running for hours..all are standard reports...
even
Active Users Request is running for hours..there is no end...
Friends...
How to trouble shoot it???????????
Please give me advice...
Regards,
SubbuHi,
Thanks for the reply......
Is this a fresh installation? If so, what version? Which OS?
Ans: Yes This is a fresh installation...After InstallationAll concurrent Managers are up and running...
Was this working properly before? If so, what modifications have you done?
Ans: As this is a fresh installation. This is first time to run the requests. After installation, when i run the requests, I got error like libmawt.so is not opened. I have given libmawt.so file path in the LD_LIBRARY_PATH. After setting libmawt.so in the LD_LIBRARY_PATH. this time I did not before error. but request is running for hours..there is no end.
Have you tried to recover the CM from OAM?
Ans: ya, I tried, but not helpful.
Tracing should be helpful, did you try to run CM Diagnostics test?
If you shutdown the CM and submit the request, what do you get?
Ans: I got status as Inactive and no manager
This is the error in the my manager log file
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on.
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-01005: null password
given; logon denied
I tried to relink FND executables using adadmin. But it did not sovle out my problem. As this is solution in metalink for above error.
My Version is : Release 12 on Red Hat AS 4.0
Regards,
Subbu -
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
Probably a "hung" firefox.exe process.
[https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it] -
I did the transfer to icloud a while back but i just realized that the second email i have attached to my account didn't switch over. Does anybody have an idea how to perform thar switch? I tried signing in on the web and couldn't but all the settings are still mobileme on the email account.
Hi,
Here is a link to the Apple Support site for everything Apple ID. Your other address may be under another ID. Follow the various paths under Multiple IDs to reconcile this so you can add that email to your iCloud Apple ID. If you find you do not have multiple IDs, the you can simply follow the instructions under Manage My Account for adding additional email addresses. But make sure you don't have multiple IDs first - it will ultimately save you a lot of time and frustration!
Here's the link:
http://www.apple.com/support/appleid -
DB backup still running, but in DB13 already status "Finished with errors"
Hi,
firstly, I am not regular DB administrator, so please be patient with me.
On 5.4.2010, 20:00 started on our server regullary planned online complete DB backup. Now (runing for more than 39 hours - DB size is only 300GB and last time, when it successfully finished, it takes less than 12 hours) I see in DB13 this backup with status "Finished with errors", but in SM37 this job is still with status "Active" so it seems to be running. On HDD where backup should be stored is created file with size 0 B. In job protocol and program protocol are only standard messages, nothing indicates that there is any error. OS is Windows Server 2008.
Program log:
DBA Action starts:
Timestamp: 20100405200040 Function: sda Object: DATA
SAVE/RESTORE request:
SAVE DATA QUICK TO 'D:\DB_BACKUP' FILE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'COMPLETE_DB_BACKUP'
SAVE/RESTORE request accepted:
OK
Job log:
05.04.2010 20:00:38 Job wurde gestartet
05.04.2010 20:00:38 Step 001 gestartet (Programm RSDBAJOB, Variante &0000000000001, Benutzername *****)
05.04.2010 20:00:38 Execute logical command DBMCLI On host *****
05.04.2010 20:00:38 Parameters:-d D01 -n ***** -uUTL -tpi D01 -tpp no_longer_used -tpc D01 backup_start COMPLETE_DB_BACKUP REC
05.04.2010 20:00:38 OVERY DATA AUTOIGNORE
Anybody have idea what is doing there?Thanks Adrian,
in DB50, DBAHIST has following record for this backup:
04-05 20:00:40 20100405200040 sda D01 DATA 9999 20100405200040
so it is still active. But when i launched DB50, there appears popup with question
Do you want to branch to the "Open Alerts" display ?
when i choose Yes, alerts are displayed, and there are some records like this
07.04.2010 14:50:08 D01 MaxDB Monitoring: D01 Last Backup Last Complete Data Backup Return Code ACTIVE 0002 - ERROR
i dont know if it means anything...
Also in table SDBADSDB is following record:
1 20:00:00 20100216134109 D01 20100405200000 20100405200038 ALLNC sda 20100405200040 20100405200040 9999 Update task ADA_INSERT_SDBADSDB 01
=> EXT2 contains "Update task ADA_INSERT_SDBADSDB 01"
So I think only opening CSN message is only applicable here... but how to do it and what exactly is CSN message (like I said, I am not regular administrator...)?
And also I have found another strange issue - although file with DB backup has still 0 B, free space on that HDD is still shrinking, but no sizes of directories are increasing... in numbers - all files on that HDD (including hidden and system files) have 663 GB, but in properties of this HDD is that 1.06 TB is used - so the difference is cca 400GB (what is 2x more than previous complete DB backup and +100GB to actual DB size...).
Edited by: Peter Marko on Apr 7, 2010 5:10 PM -
Request status is in Red, where as message is "Request still running"
Hi,
In my production system, one data load showing red as status,while in status tab tab it is giving message that request is still running.
Please give me your valuable suggestions, why it is showing linke that and my next steps in this case.
Thanks in advance.
Thanks And Regards,
Narayana K.Hi,
It might have occure because of Time out.Your Bw system is still searching for the request while the request already got loaded virtually.
Just try to do a repeat if possible.
Hope this helps
Assign points if useful
Regards,
venkat -
Hi Hussen,
One conc request is still running, it should be in completed in couple minutes.
When i checked it's parent request, it is in Phase:Running Status:Paused state.
Any help?Hi,
Please mention the application release along with the database version and OS.
One conc request is still running, it should be in completed in couple minutes. Is this a standard or custom concurrent program? Has this ever worked? If yes, any changes have been done recently?
Please verify that there are no locks in the database from the backend.
When i checked it's parent request, it is in Phase:Running Status:Paused state. This is an expected behavior if the child process is still running.
Regards,
Hussein -
Request still running but?
Hi,
My request is running , but in the data target the request is set to green why?
give me the solution
and am not able to see the data in the data target
data is there in PSA
Thanx in advance,
Ravi.Hi Ravi,
Please check with the Tcode -SM37 whether your job is complete or not.
If Your job is not complete then you are unable to see the data .
If your job is complete and request is still running then kindly check the log of the you job in sm37 only from that you can come to the detail that why the status is green and the request is still running.
Rgds,
Hirdesh Gupta -
from 2..3 weeks,firefox ,even with this beta version,sometime..closes unespectedly (1)...
then it is impossible to see a part of a site..the account details of my bank,but with safari is ok (2).
when firefox requests to download an update..to fix troubles..after 20 minutes ..is still running,i tried 2 times..same result,so i interrupt download.
3 things...You need to start Firefox 4 in 32 bit mode on a Mac.
See http://kb.mozillazine.org/Flash#Flash_does_not_work_in_Firefox_4_-_Mac_OS -
Hi Expert,
I did extract data for SAP HR Recruitment from source system (SAP R/3) to Cube in BW 7.0, when I ran the InfoPackage, the message always with status "Request still running" (detail message --> missing message: Number of send message) until few hours, no data extracted to PSA.
But the problem only in 0APPLICANT (text and attributes) datasource, no problem found in the others Recruitment datasources.
I've to DataSource replication, delete/re-create infopackage, re-arrange transformation. And I've check source system using RSA3 and Applicant data available in the source system.
I've check using SM50, the process always running but never finish (status always Yellow).
Is there any solution for this problem ?
Regards,
Tri WicaksonoHi....
Have you checked the extraction job in the Source System ...........copy the request number ......go to the source system...........SM37......put *REQXXXXXXX........check whether the Job got completed or not.....
Also , In the IP Monitor screen....in the Menu Bar ---> Settings --> Evaluation of requests (Traffic Lights) --> For the option " If no data is available in the system the request "......you should select "Status Successful".....by default it will be "Status Successful" only...until and unless someone change it manually....
Also check for short dump and TRFC..........in both source system and data ware house.........in the Menu Bar --> Environment.......there you will get all the options....
To check the Short Dumps.........you have search for the Request Number.....if it is there it means load went to short dump........
If TRFCs are stucj press F6 to push it........
After that also if it doesn't progress....it means it went to dump.....then change the stsus to red manually and repeat the load......
Regards,
Debjani..... -
Request still running no idocs are arrived into BI
Hi Experts,
I'm working on EHP1[BI 7.01] and trying to load the data from R/3 system with generic data source. The records are updated in PSA[data source] and which is showing "12:25:21 ( 15 From 0 Records ) " and with yellow status with the below information.
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
I checked different threads relating to this issue with different solutions like checking WE20, BD87, tRFC etc., but still i'm unable to resolve this.
This is very urgent issue could anyone please help me in resolving this issue..
Thanks & Regards,
AmarnathI mean.. Once u press Source system.. it will ask u for the ID and PWD.. once u give that.. it will ask for the data range .. by default it will be todays date as ur has started today only.... and then execute...
it will take u to SM58 screen.. there u just see the status of the different IDOC entries... if u can see the Executed as status then u can press F6 to push it to BW..
If u see the status as Executing then u need to wait as the operation is still running....
.. In practive if u feel that this load is taking long time compared to the actual.. then u can go ahead with the the repeat of the load by killing the present load in the source system.. and removing the bad req from the ur target..
thanks
Hope this helps. -
Request shows in Red status after extraction of Data from Planning area
Hi Experts,
I am extracting data from DP planning area to APO BW Info Cube. It was working fine but from last few days after extraction we are getting Red status of that request. However whatever data packages we are extracting we are getting same in to Info Cube also. But only status of that request is in Red.
I gone through step by step analysis I found "Data selection succesfully finished?" statement in Red status & rest are in green. When I gone through the details of this statement then I found Missing "Message:Selection Completed" in yellow status.
Any Idea? How do i resolve this issue?
Please advise..
Regards
SujayHi Sujay,
Check the logs obtained after the extraction.
This only will tell you fare idea for you to proceed further
to resolve the error that has happened.
Also check whether the extracted data is correct by
random sampling of extracted data
Regards
R. Senthil Mareeswaran. -
Re Run Client Export Transport Request
Dear Experts,
I was trying to do system refresh of Production data to quality. While executing the transport request in quality (STMS_IMPORT) quality server abruptly stopped. Now after starting the server I am checking the status of the "Client Export - Specific Object" Transport. It shows "Import Running". In import monitor the execution start is showing yesterdays date and status as running.
How can I rerun the TR
Ranjit SimonHi Ranjit,
You can check the import monitor and see if you can cancel the import request.
Once this is done, check TRJOB and TRBAT tables.
On OS level, if you can see abandoned tp processes, you can kill that.
Regards -
Posting run for future period requested (check entry)
Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
I checked in OB52 postings periods are open for 2009(all periods)
SAP note 1150235 (all corrections) and 1153718 are completely implemented.
Still the problem is not resolved.
Regards,
SankarHi Sankar,
I would like to refer you to the already implemented note 1153718 which states :
After you implement the changes, the system issues error message AA 697
"Posting run for future period requested (check entry)" immediately when
you use a fiscal year that is in the future. In principle, you can
customize this message. However, in this case, no settings are taken
into account; the system always issues an error message.
Regards Bernhard -
How to make tomcat still running after reboot
hi all,
i want ask about how to make tomcat still running after our computer reboot.
so our server still can serve the the request without we start manualy the tomcat.
please replies
thank's before*nix or win32 or other?
Maybe you are looking for
-
HTTP response code 403 (forbidden)
Hi, my name is Sebastiano and I'm a student. I'm developping a Server-Client application for Web in 100% Java. My application comunicates with a browser (Explorer) through a socket to satisfy http request. So my application is between the browser and
-
Upgrading from Photoshop Elements 6.0 to Lightroom?
Hi, Is there any way to import a Photoshop Elements 6.0 catalog to Lightroom 1.3? I don't see it as an option in the Import dialog. I upgraded from PSE 4.0 to 6.0 a little while back, but I've decided it's too buggy and I'd like to give Lightroom a t
-
Apache Environment Variables inside PL/SQL
How to access Apache Environment Variables inside HTMLDB (PL/SQL block)?
-
Hello there i am using the latest version of pages on ipad3 but when I imported a word doument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can a
-
Opening a document in InDesign I'm informed the font "Times" is missing. Now there are many iterations of Times fonts; Times Roman, Times New Roman, etc, but I assume something like Times Classic or Times Regular is sought here. Is that correct, or i