Request shows in Red status after extraction of Data from Planning area
Hi Experts,
I am extracting data from DP planning area to APO BW Info Cube. It was working fine but from last few days after extraction we are getting Red status of that request. However whatever data packages we are extracting we are getting same in to Info Cube also. But only status of that request is in Red.
I gone through step by step analysis I found "Data selection succesfully finished?" statement in Red status & rest are in green. When I gone through the details of this statement then I found Missing "Message:Selection Completed" in yellow status.
Any Idea? How do i resolve this issue?
Please advise..
Regards
Sujay
Hi Sujay,
Check the logs obtained after the extraction.
This only will tell you fare idea for you to proceed further
to resolve the error that has happened.
Also check whether the extracted data is correct by
random sampling of extracted data
Regards
R. Senthil Mareeswaran.
Similar Messages
-
Extraction of data from Planning and load it into Oracle/SQL server (RDBMS)
Hi All,
ODI can extract data from Oracle/SQL server RDBMS and load it into Hyperion planning, but I wanted to know if it is possible to extract data from Hyperion Planning through ODI and load it into Oracle or SQL server RDMBS i.e the other way round.
Kindly let me know if that is possible or not,If yes then please let me know what is the exact process to achieve this through ODI.
Thanks & Regrads,
GurpreetYes this can be done. Remember that Planning data is actually stored in Essbase so the Knowledge module you will need to use is LKM Essbase to SQL (DATA)
-
Request: Problem in Extraction of data from CRM to BW
Hi Gurus
I have problems in extracting the data from CRM to BW.I thought you are the one who can solve them:
1) When I check the data in the datasource in RSA3 i can see all records as well as i can see complete data in that but when i extract and check the data in cube i can see all records but i cannot see the complete data i.e some data is missing.
2)And another problem is that In report i have 2 characteristics(DATS) start date and end date now i am trying to get number of days from start date to end date.
I appreciate you in advance. If u find any good documentation please send me to [email protected]
With regards
Nagamani.Hi krishna,
yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM -
I am extracting the data from ECC To bw .but Data Loading taking long tim
Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chanduHi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar. -
Missing key figures from planning area after recent transports
Hi,
We are facing an issue of data not loaded to the planning area , realized this after planning book does not show any values in the current week bucket. However the required values show up in the Infocube. Our setup is as below on SCM 7
external FILE---> FILE DataSource -
>CUBE -
> /SAPAPO/RTSINPUT_CUBE program -
> Planning area ---> planning book
Recent transports included selelction variant for the above program and now we see that some Key Figures are missing from Planning area from the KEY FIG assignement tab option from the above RTSINPUT_CUBE program.
Can any one please help
Edited by: AAL123 on May 19, 2011 11:25 AMHi,
Did you check what all change objects have been selected in your trasport request which is causing this?
Best Regards,
Chandu. -
Can't extract the data from sourse system
hi,everyone
i have a question about extracting the data from sourse system.i created a general datasourse.in the r3 system,i used t-code:rsa3 to extract the data successful. but ,when i replicate the datasourse to the bw system,i can't extract the data to the psa. in the process of the extracting,accur a error like below:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the
authorizations of the background user in the source system.
who can tell me why?
thx
zhangHi zhang,
Please check the below points.
1. Perform the connection and authorization test in SM59 for the RFC connecion.
2. Make sure the RFC user extracting the data is having sufficient authorization and correct profile as per note 150315.
3. make sure there are sufficient number of Dialog process in BW in SM50.
4. check T code SM58 in source system for any more errors.
5. check the connection between the systems.
Check
Note 561880 - Requests hang because IDocs are not processed.
Note 535172 - IDoc: Dup. IDocs in tRFC inbound processing w/ runtime error
Note 555229 - IDocs hang in status 64 for tRFC with immediate processing
Hope this helps.
Regards,
Suman.T -
Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support -
Extracting updated data from SAP R/3 to BOBJ DS
Hi all,
I have a doubt reg extracting updated data from SAP to BOBJ DS. For example i am extracting 50000 records from SAP table to BOBJ DS say its taking half an hour, after extracting data 10 more records have added in the same table. Do we need extract the whole record again or do we have some other way to extract only those 10 records from table.
Please help me. I have searched in forums but cudnt find the exact solution fyi.
Thanks,
GunaApart from stepd 1,2, you need to create a Target Data store and a table to load your MARA data.
3. Now the MARA data will be available in data store(DS_ERP), say table name as BO_MARA
Why do you want to change the table name? Are you planning to stage the data anywhere?
4. Create a dataflow source as BO_MARA, query transform and destination as a table
Data transport object is required if you are using R/3 Data Flow.
This would suffice just for a full load, if all your transformations can be incorporated inside the Query transform.
5. Do Transformation.
6. Transformed data will be available in target table.
Only after executing the job that the transformed "data" will be available in the target.
The above part mentions only about a Source, Query transform, Source Data Store and table.
Apart from these
You would require a Script object to write the condition, to SELECT the MAX timestamps. You would require Variables to be created in your job to redirect your job path and to restrict the data extracted.
Use your DataFlow in a Conditional object. If load type is first, in the then part use the dataflow which you might have already designed. Else part will have a replicated Data Flow with the above mentioned WHERE condtion in Query transform.
Suggest you to refer Desiger document and DI supplement for SAP as well. Inform if you are stuck.
Regards,
Suneer Mehmood. -
Example on extracting time data from clusters
Hi Experts,
Please send me a sample code for time data extraction from clusters. or steps to extract time data from clusters.
Thank you.
Regards,
Admir.
Points will be rewarded.Hi
see the sample report for time data fetching
But ime data is not fetched from Clusters, only payroll data is fetched from clusters
Time related infotypes are 2000 to 2999.
REPORT zh_absence_quota
NO STANDARD PAGE HEADING
MESSAGE-ID zh_msg
LINE-SIZE 169
LINE-COUNT 60(1).
T A B L E S D E C L A R A T I O N S
TABLES: pernr, " Logical PNP
t001p, " Personnel Subarea
t529u, " Employment Status
t500p, " Personnel Area
t501, " Employee Group
t503k, " Employee Subgroup
t549a, " Payroll Area
t554s, " Absence Type
t554t, " Absence Type Texts
t556a, " Quota Type
t527x, " Orgn. Unit
t556b, " Quota Type Text
pa0003. " Payroll Status
INFOTYPES:
0000, " Actions
0001, " Organizational Assignment
2006, " Absence Quota
2001. " Absences
T Y P E S D E C L A R A T I O N S
Employee Absence Structure
TYPES: BEGIN OF s_2001,
pernr TYPE persno, " Personal Number
awart TYPE awart, " Absence Type
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
END OF s_2001.
Employee Absence Quota Structure
TYPES: BEGIN OF s_2006,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
anzhl TYPE ptm_quonum, " Absence Entitlement days
ename TYPE emnam, " employee Name
ktext TYPE kotxt, " Absence Type Text
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
END OF s_2006.
Combined Employee Absence and Quota Structure
TYPES: BEGIN OF s_rep,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
anzhl TYPE ptm_quonum, " Absence Entitlement days
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
ktext TYPE kotxt, " Quota Type Text
awart TYPE awart, " Absence Type
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
endda TYPE endda, " End date
begda TYPE begda, " Begin date
END OF s_rep.
Declaration of Variables
DATA : gv_atext TYPE abwtxt, " Absence Type Text
gv_ktext TYPE kotxt, " Absence Type Text
gv_title1 TYPE sylisel, " Report title
gv_year(4) TYPE c, " Year
gv_mon(2) TYPE c, " Month
gv_hrs TYPE abwtg, " Hours
gv_date TYPE sydatum, " Date
gv_date1 TYPE sydatum, " Date
gv_dial. " Color flag
Declaration of Constants
CONSTANTS :
c_x TYPE c VALUE 'X', " Sign
c_1 TYPE persg VALUE '1', " Emp Group
c_pernr(8) TYPE n VALUE '00000000', " Pernr
c_moabw TYPE moabw VALUE '01', " Per SA Grouping
c_mozko TYPE mozko VALUE '01', " Per SA Grouping
c_mopgk TYPE mopgk VALUE '1', " Emp SGrp Grouping
c_endda TYPE sydatum VALUE '99991231', " End Date
c_val1(2) TYPE c VALUE '31', " Date Type
c_val2(2) TYPE c VALUE '12', " Date Type
c_val LIKE p0041-dar01 VALUE '01', " Date Type
c_date1 LIKE sy-datum VALUE '18000101'. " Date
I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_2001 TYPE STANDARD TABLE OF s_2001 WITH HEADER LINE,
i_2006 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep1 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE.
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_ktart FOR t556a-ktart, " Absence Quota Type
s_awart FOR t554s-subty. " Absence Type
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-003. " Quota & Absence
PARAMETERS: p_qa RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-004. " Quota
PARAMETERS: p_q RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-005. " Absence
PARAMETERS: p_a RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN END OF BLOCK b2.
I N I T I A L I Z A T I O N *
INITIALIZATION.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Selection of Period
PERFORM get_period.
Get PERNR from LDB
GET pernr.
IF p0000-stat2 <> '0'.
Get the data from PA0001,PA2001, PA2006
PERFORM get_pers_data.
ENDIF.
T O P - O F - P A G E *
TOP-OF-PAGE.
Header of the List
PERFORM header.
E N D - O F - P A G E *
Footer
END-OF-PAGE.
IF p_qa = c_x.
Display both Absence and Quota Data
WRITE /1(188) sy-uline.
ELSEIF p_q = c_x.
Display only Quota Data
WRITE /1(114) sy-uline.
ELSEIF p_a = c_x.
Display only Absence Data
WRITE /1(125) sy-uline.
ENDIF.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Combine the Absence and Quota Data
PERFORM append_data.
IF p_qa = c_x.
Display both Absence and Quota Data
PERFORM display_qa_data.
ELSEIF p_q = c_x.
Display only Quota Data
PERFORM display_q_data.
ELSEIF p_a = c_x.
Display only Absence Data
PERFORM display_a_data.
ENDIF.
*& Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Personnel Number
CLEAR pa0003.
IF NOT pnppernr[] IS INITIAL.
SELECT pernr
FROM pa0003 UP TO 1 ROWS
INTO pa0003-pernr
WHERE pernr IN pnppernr.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Number'(006).
ENDIF.
ENDIF.
Validation of Employee Status
CLEAR t529u.
IF NOT pnpstat2[] IS INITIAL.
SELECT SINGLE statv
INTO t529u-statv
FROM t529u
WHERE statv IN pnpstat2 AND
statn = '2' AND
sprsl = sy-langu.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Invalid Employee Status'(007).
ENDIF.
ENDIF.
Validation of Personnel Area
CLEAR t500p.
IF NOT pnpwerks[] IS INITIAL.
SELECT persa
FROM t500p UP TO 1 ROWS
INTO t500p-persa
WHERE persa IN pnpwerks.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Area'(008).
ENDIF.
ENDIF.
Validation of Personnel Sub Area
CLEAR t001p.
IF NOT pnpbtrtl[] IS INITIAL.
SELECT btrtl
FROM t001p UP TO 1 ROWS
INTO t001p-btrtl
WHERE btrtl IN pnpbtrtl.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Sub Area'(009).
ENDIF.
ENDIF.
Validation of Employee Group
CLEAR t501.
IF NOT pnppersg[] IS INITIAL.
SELECT persg
FROM t501 UP TO 1 ROWS
INTO t501-persg
WHERE persg IN pnppersg.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Group'(010).
ENDIF.
ENDIF.
Validation of Employee Sub Group
CLEAR t503k.
IF NOT pnppersk[] IS INITIAL.
SELECT persk
FROM t503k UP TO 1 ROWS
INTO t503k-persk
WHERE persk IN pnppersk.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Sub Group'(011).
ENDIF.
ENDIF.
Validation of Payroll Area
CLEAR t549a.
IF NOT pnpabkrs[] IS INITIAL.
SELECT abkrs
FROM t549a UP TO 1 ROWS
INTO t549a-abkrs
WHERE abkrs IN pnpabkrs.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Payroll Area'(026).
ENDIF.
ENDIF.
Validation of Absence Type
CLEAR t554s.
IF NOT s_awart[] IS INITIAL.
SELECT subty
FROM t554s UP TO 1 ROWS
INTO t554s-subty
WHERE subty IN s_awart AND
moabw EQ c_moabw AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Absence Type'(012).
ENDIF.
ENDIF.
Validation of Absence Quota Type
CLEAR t556a.
IF NOT s_ktart[] IS INITIAL.
SELECT ktart
FROM t556a UP TO 1 ROWS
INTO t556a-ktart
WHERE ktart IN s_ktart AND
mopgk EQ c_mopgk AND
mozko EQ c_mozko AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Quota Type'(013).
ENDIF.
ENDIF.
ENDFORM. "validate_screen
*& Form get_period
Get the Correct Period based on Selection screen selection
FORM get_period.
CLEAR: gv_year,gv_mon, gv_date, gv_date1.
gv_year = sy-datum+0(4).
gv_mon = sy-datum+4(2).
IF pnptimr1 = c_x. " Current Date
pnpbegda = sy-datum.
pnpendda = sy-datum.
ELSEIF pnptimr2 = c_x. " Current Month
CONCATENATE gv_year gv_mon c_val INTO gv_date.
CONCATENATE gv_year gv_mon c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr3 = c_x. " Current Year
CONCATENATE gv_year c_val c_val INTO gv_date.
CONCATENATE gv_year c_val2 c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr4 = c_x. " Upto Today
pnpbegda = c_date1.
pnpendda = sy-datum.
ELSEIF pnptimr5 = c_x. " From Today
pnpbegda = sy-datum.
pnpendda = c_endda.
ELSE.
IF ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = c_date1.
pnpendda = c_endda.
ELSEIF pnpbegda IS INITIAL AND NOT pnpendda IS INITIAL.
pnpbegda = c_date1.
pnpendda = pnpendda.
ELSEIF NOT ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = pnpbegda.
pnpendda = pnpendda.
ENDIF.
ENDIF.
ENDFORM. "get_period
*& Form get_pers_data
Get the Absence and Quota Data from PA0001,PA2001,PA2006
FORM get_pers_data.
DATA: lv_year1(4) TYPE n,
lv_year2(4) TYPE n,
lv_date1 TYPE sydatum,
lv_date2 TYPE sydatum,
lv_anzhb TYPE ptm_quonum. " Last Year Balance days
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
Absence Data
LOOP AT p2001 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2001-awart IN s_awart.
i_2001-pernr = pernr-pernr.
i_2001-subty = p2001-subty.
i_2001-awart = p2001-awart.
i_2001-abrtg = p2001-abrtg.
i_2001-begda = p2001-begda.
i_2001-endda = p2001-endda.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2001-ename = p0001-ename.
Get the Absence Type Text
CLEAR gv_atext.
SELECT SINGLE atext INTO gv_atext FROM t554t
WHERE sprsl = sy-langu AND
moabw = c_moabw AND
awart = p2001-awart.
IF sy-subrc = 0.
i_2001-atext = gv_atext.
ENDIF.
APPEND i_2001.
CLEAR i_2001.
ENDIF.
ENDLOOP.
Quota Data
LOOP AT p2006 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2006-ktart IN s_ktart.
i_2006-pernr = pernr-pernr.
i_2006-subty = p2006-subty.
i_2006-begda = p2006-begda.
i_2006-endda = p2006-endda.
i_2006-year = p2006-endda+0(4).
i_2006-ktart = p2006-ktart.
i_2006-anzhl = p2006-anzhl.
i_2006-kverb = p2006-kverb.
i_2006-anzhb = p2006-anzhl - p2006-kverb.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2006-ename = p0001-ename.
Get the Quota Type Text
CLEAR gv_ktext.
SELECT SINGLE ktext INTO gv_ktext FROM t556b
WHERE sprsl = sy-langu AND
mopgk = c_mopgk AND
mozko = c_mozko AND
ktart = p2006-ktart.
IF sy-subrc = 0.
i_2006-ktext = gv_ktext.
ENDIF.
APPEND i_2006.
CLEAR i_2006.
ENDIF.
ENDLOOP.
For Vacation Quota (80) get the Balance of the Last Year and
add to the Current Year Quota
LOOP AT i_2006.
IF i_2006-ktart = '80'.
lv_year1 = i_2006-endda+0(4).
lv_year2 = lv_year1 - 1.
CONCATENATE lv_year2 '01' '01' INTO lv_date1.
CONCATENATE lv_year2 '12' '31' INTO lv_date2.
LOOP AT p2006 WHERE pernr = i_2006-pernr AND
begda GE lv_date1 AND
endda LE lv_date2 AND
ktart = '80'.
lv_anzhb = p2006-anzhl - p2006-kverb.
i_rep1-pernr = i_2006-pernr.
i_rep1-ktext = i_2006-ktext.
i_rep1-anzhl = p2006-anzhl.
i_rep1-kverb = p2006-kverb.
i_rep1-ename = i_2006-ename.
i_rep1-begda = p2006-begda.
i_rep1-endda = p2006-endda.
i_rep1-anzhb = lv_anzhb.
i_rep1-ktart = '80'.
i_rep1-year = lv_year2.
APPEND i_rep1.
CLEAR: i_rep1.
ENDLOOP.
ENDIF.
CLEAR: lv_year1, lv_year2,
lv_date1, lv_date2,lv_anzhb.
ENDLOOP.
SORT i_rep1 BY pernr ktart.
ENDFORM. "get_pers_data
*& Form append_data
Put the Absence and Quota Data into one Report Int Table
FORM append_data.
CLEAR: i_rep.
REFRESH: i_rep.
SORT i_2001 BY pernr awart.
SORT i_2006 BY pernr ktart year.
Move I_REP1 data into i_2006
LOOP AT i_rep1.
MOVE-CORRESPONDING i_rep1 TO i_2006.
APPEND i_2006.
CLEAR i_2006.
ENDLOOP.
Move the Absence and Quota Data into a final Int Table
LOOP AT i_2006.
i_rep-pernr = i_2006-pernr.
i_rep-ename = i_2006-ename.
i_rep-ktart = i_2006-ktart.
i_rep-anzhl = i_2006-anzhl.
i_rep-kverb = i_2006-kverb.
i_rep-ktext = i_2006-ktext.
i_rep-anzhb = i_2006-anzhb.
i_rep-year = i_2006-year.
CLEAR i_2001.
CASE i_2006-ktart.
WHEN '81'.
PERFORM get_2001 USING i_2006-pernr '1000' i_2006-year.
WHEN '50'.
PERFORM get_2001 USING i_2006-pernr '1002' i_2006-year.
WHEN '80'.
PERFORM get_2001 USING i_2006-pernr '1001' i_2006-year.
WHEN '56'.
PERFORM get_2001 USING i_2006-pernr '1003' i_2006-year.
WHEN '51'.
PERFORM get_2001 USING i_2006-pernr '1004' i_2006-year.
WHEN '52'.
PERFORM get_2001 USING i_2006-pernr '1005' i_2006-year.
WHEN '54'.
PERFORM get_2001 USING i_2006-pernr '1006' i_2006-year.
WHEN '53'.
PERFORM get_2001 USING i_2006-pernr '1007' i_2006-year.
WHEN '55'.
PERFORM get_2001 USING i_2006-pernr '1008' i_2006-year.
WHEN '57'.
PERFORM get_2001 USING i_2006-pernr '1009' i_2006-year.
WHEN '90'.
PERFORM get_2001 USING i_2006-pernr '2000' i_2006-year.
WHEN '58'.
PERFORM get_2001 USING i_2006-pernr '2001' i_2006-year.
WHEN '59'.
PERFORM get_2001 USING i_2006-pernr '2002' i_2006-year.
WHEN '91'.
PERFORM get_2001 USING i_2006-pernr '2003' i_2006-year.
ENDCASE.
IF sy-subrc <> 0.
APPEND i_rep.
ENDIF.
CLEAR i_rep.
ENDLOOP.
SORT i_rep BY pernr ktart year.
DELETE i_rep WHERE pernr = ' '.
ENDFORM. " append_data
*& Form display_qa_data
Display the Absence and Quota Data
FORM display_qa_data.
DATA: lv_flag, " New Flag
lv_tot2 TYPE ptm_quonum. " Absence Balance days
IF i_rep[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_rep.
toggle color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_rep INDEX sy-tabix.
WRITE:/1 sy-vline,2(8) i_rep-pernr,
10 sy-vline,11(40) i_rep-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_rep-ktext.
ENDAT.
AT NEW year.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 78(4) i_rep-year,
82 sy-vline, 83(11) i_rep-anzhl,
94 sy-vline, 95(25) i_rep-atext,
120 sy-vline,133 sy-vline,
144 sy-vline,
155 sy-vline,156(13) i_rep-anzhb,
169 sy-vline.
lv_tot2 = lv_tot2 + i_rep-anzhb.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg NO-ZERO,
133 sy-vline,134(10) i_rep-begda NO-ZERO,
144 sy-vline,145(10) i_rep-endda NO-ZERO,
155 sy-vline,169 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(169) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE:/1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg,
133 sy-vline,144 sy-vline,
155 sy-vline, 156(13) lv_tot2,
169 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(169) sy-uline.
CLEAR lv_tot2.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_qa_data
*& Form display_q_data
Display only the Quota Data
FORM display_q_data.
DATA: lv_flag. " New Flag
SORT i_2006 BY pernr ktart year.
IF i_2006[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2006.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(8) i_2006-pernr,
10 sy-vline,11(40) i_2006-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline,10 sy-vline,
51 sy-vline,52(25) i_2006-ktext.
ENDAT.
AT NEW year.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(4) i_2006-year,
82 sy-vline,83(11) i_2006-anzhl,
94 sy-vline,95(13) i_2006-anzhb,
108 sy-vline.
NEW-LINE.
ENDAT.
AT END OF pernr.
WRITE : /1(108) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 82 sy-vline,
94 sy-vline, 95(13) i_2006-anzhb,
108 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(108) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_q_data
*& Form display_a_data
Display Only the Absence Quota
FORM display_a_data.
DATA: lv_flag. " New Flag
SORT i_2001 BY pernr awart.
IF i_2001[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2001.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2001 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(10) i_2001-pernr,
10 sy-vline,11(40) i_2001-ename.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_2001-atext,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,91(10) i_2001-begda,
101 sy-vline,102(10) i_2001-endda,
112 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(112) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,101 sy-vline,
112 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(112) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_a_data
*& Form header
Write the Report Header
FORM header .
data : lv_pers type pbtxt,
lv_orgn type orgtx.
gv_title1 = sy-title. " Set List Header
IF p_qa = c_x.
NEW-PAGE LINE-SIZE 193.
ELSEIF p_a = c_x.
NEW-PAGE LINE-SIZE 125.
ELSEIF p_q = c_x.
NEW-PAGE LINE-SIZE 119.
ENDIF.
Standard header
FORMAT RESET.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = gv_title1.
Get the Personal Area and Org.Unit Texts
clear : lv_pers,lv_orgn.
select single name1 into lv_pers
from t500p where persa = pnpwerks-low.
select single orgtx into lv_orgn
from t527x where sprsl = sy-langu and
orgeh = pnporgeh-low and
endda = c_endda.
if not lv_pers is initial.
write : /2 'Personal Area:'(017), 17(25) lv_pers color 7.
endif.
if not lv_orgn is initial.
write : /2 'Organization Unit:'(021), 20(25) lv_orgn color 3.
endif.
IF p_qa = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(169) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(25) 'Absence Description'(022) CENTERED,
120 sy-vline,121(12) 'Absence days'(023),
133 sy-vline,134(10) 'From Date'(024),
144 sy-vline,145(10) 'To Date'(025),
155 sy-vline,156(13) 'Quota Balance'(020),
169 sy-vline.
WRITE : /1(169) sy-uline.
ELSEIF p_q = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(108) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(13) 'Quota Balance'(020),
108 sy-vline.
WRITE : /1(108) sy-uline.
ELSEIF p_a = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(112) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Absence Description'(022) CENTERED,
77 sy-vline,78(12) 'Absence days'(023),
90 sy-vline,91(10) 'From Date'(024),
101 sy-vline,102(10) 'To Date'(025),
112 sy-vline.
WRITE : /1(112) sy-uline.
ENDIF.
ENDFORM. " header
*& Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
gv_dial = c_x.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
CLEAR gv_dial.
ENDIF.
ENDFORM. " toggle_color
*& Form get_2001
Get the ABsence type for each Quota type
FORM get_2001 USING p_pernr TYPE persno
p_value TYPE awart
p_year.
LOOP AT i_2001 WHERE pernr = p_pernr AND
awart = p_value AND
endda+0(4) = p_year.
i_rep-awart = i_2001-awart.
i_rep-abrtg = i_2001-abrtg.
i_rep-atext = i_2001-atext.
i_rep-begda = i_2001-begda.
i_rep-endda = i_2001-endda.
APPEND i_rep.
ENDLOOP.
ENDFORM. " get_2001
<b>Reward points for useful Answers</b>
Regards
Anji -
How to extract incremental data from SQL server to oracle tables in ODI
HI All,
In my ODI sql server is install.My Source is in SQL server and my target is in Oracle.
I need to create a interface mapping where i need to extract incremental data from sql server to oracle.
There is a datetime(with Timestamp) field in sql server .I need to pull incremental data based on dateime.
Example = tablename.DateTime > (select '1-jan-11' from dual) .....i am using this query but its not woking.the error is Invalid object name"dual".
We are not going to use Incremental in IKM and LKM.
Request you to please provide any suggestion ASAP.
Thanks,
LonyYou can do that via Variable.
In the interface mapping create a filter on Tablename.DateTime
and put the condition like this
Tablename.DateTime BETWEEN #VAR and in the variable use this query in refreshing tab with oracle schema
SELECT max(start_time)||' AND '||max(END_TIME)+1 from audit_table where ETL_JOB_CODE = '20'In the package call the above variable in refresh mode and then interface.
This way you will pass from the query between and condition date and pass to interface so that SQL Server fetches the data between those too range.
Note:- You might need to tweak the date format so that SQL Server can understand.
Hope this helps. -
CC 5.2 Alert Generation - Not extracting any data from SAP
Hi there,
We are trying to use the alert function for critical transactions in CC 5.2. We have set the relevant parameters in CC. The Alert_Log.txt is created successfully but it is not extracting any data from SAP. Is there any settings that I am missing here, both in R/3 and CC 5.2? I really appreciate your help. Below is the Alert_Log.txt for your review.
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
FINEST: Analysis Daemon started background Job ID:41 (Daemon ID D:\usr\sap\CC1\DVEBMGS00\j2ee\cluster\server0\. Thread ID 0)
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Scheduling Job =>41----
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:41 (GENERATE_ALERT) - AlertGeneration_Testing
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Running
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=1, message=AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Alert Generation Started @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Conflict Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Critical Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Mitigation Monitor Control Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@@@@ Backend Access Interface execution has been started @@@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@System=>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
No of Records Inserted in ALTCDLOG =>0 For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********SOD Tcode Size=>0**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********Alert Tcode Log File=>D:\cc_alert_log\cc_alert_log1.txt is created**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
File Output Log File Size ==>0----
For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: -
Conf Last Run Date=>2007-12-12--Conf Last Run Time=>12:45:11--
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: ==$$$===Notif Current Date=>2007-12-20==$$$==Notif Current Time=>14:27:32===$$$===
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>1
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CONFALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>2
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CRITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>MITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Start AlertStats.............
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: start:Sat Dec 01 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: now:Thu Dec 20 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: end: Tue Jan 01 14:27:32 CST 2008
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Month 2007/12
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@=== Alert Generation Completed Successfully!===@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Complete
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
0@@Msg is Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=0, message=Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>41----Hi,
we have ran into similar issue of alert log being not displayed accurately in CC 4.0 version and we implemented the Note 1044393 - CC5.1 Alerts, it did work for us, as you are using CC5.2, I would recommend you to check the code and then try this note. But iam still skeptical whether this note will be helpful to you or not.
Thanks,
Kavitha -
Extract the data from URL using XI
Hi,
Please let me know if you have idea about this:
Scenario is:
1. We are extracting some raw data (strings) from one url(http) using java program ...
2. After extracting the data , some parsers making the XML files for that.
Now my question is :
Will able to add these javacalsses(java program) into XI for trigger the messages from url?
It means I need to call url through XI and make the xml for that. After getting XML we need to map RFC for process the messages into ZTable.
I didn't get idea about how to make call for url through XI. It would be appreciated for sharing your expereince on this..
Regards...Raj!Hi,
>>>>Will able to add these javacalsses(java program) into XI for trigger the messages from url?
yes you can do it all in a java proxy
you just have to invoke a java proxy
and inside you can put any java code you wish
then you can use the parser and fill the xml message
>>>>It means I need to call url through XI and make the xml for that. After getting XML we need to map RFC for process the messages into ZTable.
then you can map your xml message to an rfc format
if you have the java classes that access
the url this will be very easy with a java proxy
for more:
https://websmp206.sap-ag.de/~sapdownload/011000358700000877852006E/HowToWorkWithJavaProxies.pdf
Regards,
michal -
Unable to extract the data from ECC 6.0 to PSA
Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanksECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to extract PS data from sap r/3 to bw
Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya
Maybe you are looking for
-
MSI TI 4200 - TD8X - PC freezes while playing games.. Dx problem? Settings? HELP!
Hi I bought a MSI GF4 TI-4200 TD 8x about 2 months ago, and it has been running fine 'till now...I'm having a few problems in a few games (HALO, homeworld 2), ocasionally my computer freezes completely in the middle of these games, and I have to rebo
-
Trying to restore from computer or cloud
help im trying to restore from computer or cloud and im told i have the wrong password
-
How to administrate update from 2.0 to 3.0
Hi, I use Mac and have Adobe digital edt 2.0, now there is an upgrade to 3.0 - Can I just download 3.0 or can I get my update another way? I want all my ibooks to be transferred to the new version. BR//Maria
-
Elements 12 on multiple computers
Hello, does anyone know if I can install my newly purchsed Elements 12 on both of my computers? I have an iMac as well as a windows based laptop. If not, any recommendations on which sytem might be best (I am definitely more comfortable on my laptop
-
Oracle Forms - how to chcek if window is opened ?
Hi, how to check in custom form if window of other form is opened? I am looking for a function similar to FIND_FORM('SOME_FORM') but finding window. Thank you, Marcin