Request status is in Red, where as message is "Request still running"

Hi,
In my production system, one data load showing red as status,while in status tab tab it is giving message that request is still running.
Please give me your valuable suggestions, why it is showing linke that and my next steps in this case.
Thanks in advance.
Thanks And Regards,
Narayana K.

Hi,
It might have occure because of Time out.Your Bw system is still searching for the request while the request already got loaded virtually.
Just try to do a repeat if possible.
Hope this helps
Assign points if useful
Regards,
venkat

Similar Messages

When I close the browser, firefox won't open again. I get the message "Firefox is still running, restart your computer." How do I fix this?

When I close the Firefox browser by clicking on the X in the upper right-hand corner of the screen, the window closes. But when I want to open Firefox again, I cannot. Instead, I get a message, "Firefox is still running. Restart your computer." This happens a few times a week and is very disconcerting. How do I fix this problem?

I will only close the browser by using your suggestion, File > Exit, from today on, and see what happens. Thank you for your expedient reply.

Even after uninstalling, reinstalling Firefox, the Firefox profile folder is empty, and I get the message "Firefox is still running and not responding close firefox...

Even after uninstalling, reinstalling Firefox, the Firefox profile folder is empty, and I get the message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." I have followed all the directions I can find, on my computer and Firefox Support. Still, the same message comes up, and "firefox" is not shown in my Windows Task Manager.
What can I do?

Delete the profiles.ini file and let Firefox create a new default profile.
* http://kb.mozillazine.org/profiles.ini_file
* http://kb.mozillazine.org/Profile_folder_-_Firefox#Files_and_folders_outside_the_profile_folder

Problem is need to log off computer to go from one web site to another with message that program still running. Logging off to go from email to something else is very time consuming and annoying.

Troublesome need to log off between switching from Yahoo to another website with message that program is still running.

Terminate Firefox from the "Processes" tab of the Windows Task Manager not the "Applications" tab. Then select firefox.exc and use the right-click context menu to "End Process" or use the "End Process" button on the selected process.
Windows 7 keyboard shortcut "Ctrl+Shift+Esc" will go directly to the Windows Task Manager and reopen the last tab that you had open.
See item #38 Closing Firefox Properly -- use File -> '''Exit'''
*http://dmcritchie.mvps.org/firefox/firefox-problems.htm#close_firefox
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.
I don't see why you feel you have to exit Firefox to get out of one website to immediately use another website. Very impractical. Does this have anything to do with desktop icons or not using tabs?
Completely unrelated to your question or your reason. Your flash plug-in is out of date.
Check for Flash updates to see if you really are current
* http://www.adobe.com/software/flash/about/
After the download,
#bring up the download manager ("Ctrl+J") and start your installs. As soon as the install comes up,
#close Firefox with File > Exit or "Firefox" button > Exit. Give Firefox some time to close and check that it finished via the Windows Task Manager -- if it is still running then terminate it by selecting the use "End Process" button or from context menu.
#proceed with the install
'''Warning''': this is the Adobe site and they have chosen to to provide crapware along with their own product. Only install the product you were planning to install. Do not install additional products: including -- "Free! McAfee Security Scan Plus" or "Google Chrome". Installing Google Chrome on your own and installing it because it is offered on the Adobe site are two different things.
Find updates for your installed plugins at http://www.mozilla.com/plugincheck/ mozilla.com/plugincheck
-- best to use Adobe's site to really see if their plug-ins are up to date.

Request showing still running in Monitor after request status is made red

Hi All,
We have a delta load running from an ODS1 to 3 Targets - Cube1, ODS3 and ODS4 through a single delta infopackage. For handling a production data failure, we had to delete the data from these 3 Targets along with the inits. Afterwards we again started the init with data transfer for all the 3 targets simultaneously. The load failed due to processing overdue. Again the inits were deleted for all the requests but during the next day loading we suddenly found the same requests in the 3 Targets with yellow status showing as running. These requests were already changed to red in QM status and the inits were deleted. But can anybody explain how come they again reappeared ?
This question is really intriguing.
Thanks
Somnath.

Hello somnath,
those request are submitted to batch, and they are still alive somehow even if you delete those requests or change them to red. And again tries to load data to providers and if no request available creates new ones.
What can you do?
1. Try to delete those jobs from the queue.(It's not possible for every request unforntunately)
2. Delete the content of provider by using right click on the provider and choose delete data.
Sarhan.

After logging off I get the message Firefox is still running please disconnect or turn off your computer

When I logg off firefox I cannot logg on until waiting for a couple of minutes.
this is the message I receive....Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
I have noticed this problem with other computers being used by other people. Also I cannot open several windows at a time, I always loose rhe original window or web site.

If you try to immediately open Firefox after closing it, you may get this message. I does take a few seconds to completely close.
Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem:
***See:
****https://support.mozilla.com/en-US/kb/Safe%20Mode
****http://kb.mozillazine.org/Safe_Mode
***Firefox 4 & 5 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode or, when Firefox 4 or 5 is open you can use the menu item Help > Restart with Add-ons Disabled (Firefox immediately shuts down and then restarts)
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4 & 5, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5) or half of them, if you wish, keeping track of what you just disabled/re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

After I close Firefox, if I try to re-open weithin about 1/2 hour, I get a message " Firefox is still running but not responding". How do I fix this?

The question is all there is!!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

In 1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar shows 100% but task is still running. Where it says x of y items complete, x is y. This also happens in Windows 7 with Bootcamp. Please explain.

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

I close Firefox session and then try to open a new browser window - get message that Firefox is still running and I need to shut down and restart. Need a solution

I close a Firefox browser and at a later time want to open a new browser window but get message "Firefox is still running and I need to shut down before I can open a new session" I do not want to shut down as this is laborious - I can go into task manager and processes and click on Firefox and end session that way but this is not the solution. Firefox seems to be running in background but I cannot open a new session window without doing on of the above.

Have a look at this post, see if it is of any help (though related to Vista, but same issue can be there with Window 7 also)
http://www.vistax64.com/browsers-mail/265937-firefox-exe-still-running.html

When i try to load certain page, the system crashed and the bottom panel states " stopped" but when I close and open firefox again,it can't and I get this message that says my firefox is still running and to open the browser i need to restart the compu

while browsing suddenly the system crashed and the bottom panel says " stopped".When closed and re-opened, I got a prompt that says firefox is still running and i have to close to open again or have to restart the computer but it doesn't work
== This happened ==
Every time Firefox opened
== just happened

You get message "firefox is still running" and computer restart doesn't help you. Try the advice below.
Make sure Firefox isn't running (end firefox.exe process in Task Manager or restart computer)
Find your profile folder
C:\Documents and Settings\USERNAME\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
find file "parent.lock" in it and delete it (the file is empty, its function is to signify to Firefox whether it's already open or not).
Then try to open Firefox again. Will it start or not? What will it say?

SXMB_MONI: Outbound Status Red (Need Err Message Alerts)

What is the best way to setup meaasge alerts in XI for a red flag in SXMB_MONI in the "Outbound Status" field? We currently have error messageing setup in ALERTCATDEF that will send an error message when the "Status" field is a red flag but I don't know if there is a way to point it to the "Outbound Status" also. We use the following short text in ALERTCATDEF for notification:
System: &SXMS_ERRSRC_SYSNAME&
POS XI Message ID:    &SXMS_MSG_GUID&
POS XI Error Category:    &SXMS_ERROR_CAT&
POS XI Error Code:    &SXMS_ERROR_CODE&
I am thinking tha ALERTCATDEF will only send an alert when the "Status" field is red flag, and may not be possible to point to the "Outbound Status" field".
     Any suggestions?    Thank-You.

Bill,
2 questions here,
1. Are alerts also triggered for outbound errors?
Am not very sure but if i remember correct ,in one of our scenarios when there was an error in SM58 while posting the Idoc ( error on outbound side in MONI ) no alert was triggered. I dont have any access to a server where alerts are working and so would just like to confirm if alerts are triggered also for Outbound side errors or are they triggered only for inbound errors?
2. If they are triggered for both, then wouldnt selectin NO RESTRICTION in where did the error occur suffice?
Regards
Bhavesh
Message was edited by:
        Bhavesh Kantilal

InfoPackage error message "Subsequent update (requests) : Status unknown "

After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown " and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
Thanks!
Luda

Hi,
Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
If possible let me know what is error message.
Regards,
Vishwa.

Request status in RED color.

Gurus-
I am loading the data from Data Stage to BW.
First load went thru with out any errors. When Data Stage team scheduled load for second time then I see Red indicator in "Request Status" as well as in "Status" tab.
When I go to details tab I see RED in "Extraction (messages) : Errors occured", Transfer (IDOCS and TRFC) :Errors occured and "Susseq. Processing (message)".
When I expand " Extraction (messages)" I see "1000 Records sent (1000 records received)" in red color.
and if I expand "Transfer ( IDOCS and TRFC) "it says "Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished "" in red color. all the Info IDOCS are in green color.
But I see Transfered and added records in mange screen of DSO. Can I activate the DSO by changing the indicator to green from red?
Pls suggest with ur valuable suggestions..

Hi,
In the monitor right click on the data package1 and do a manual update.
Jaya.

Request Status Red

After data load from ODS to Cube request status is RED.But data successfully transfered and validated the data,exactly it matching.No where I am getting log also.What could be the problem.But forcibly made it to green.But in production i cant change the QM status.Please valuable inputs
Rajesh

Hi,
If it happens only for this target, go to Mange screen ---> Environment (From Menu) ---> Automatic Request Processing ---> Tick the checkbox that Set Quality Status to OK. This will ask a transport request, collect this into TR and move to Quality and Production.
If this happens for all systems, make the Extraction Monitor settings in SPRO.
Hope this helps,
Regards,
Rama Murthy.

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

Request status is in Red, where as message is "Request still running"

Similar Messages

Maybe you are looking for