Request status yellow and no records pulled

Hi ,
I am working on a newly installed BI system.I have installed 0figl_c10 cube and respective flow.The data source is 0fi_gl_10 which contains 0.1 million records in R/3 trans RSA3.When i try to pull the data nothing is coming into my system except the yellow status of the request with '0' records.
Can you suggest how we can resolve this considering that its a newly installed  system.
Thnaks
Sri

Check out this thread also [/message/8815574#8815574 [original link is broken]]

Similar Messages

  • REQUEST STATUS YELLOW WHILE MONITOR STATUS GREEN - BI7

    Hellow,
    I try to load data with 0CO_OM_OPA_1, 0CO_OM_WBS_1 into Z cubes which are similar to the business content cubes 0OPA_C11 and 0WBS_C11 respectively.
    ETL is BW3.5 (transfer rule and update rules). When I look at the request in the monitor, I see that everything is green but the request status is yellow and not available for reporting. I can change the status to green manually but this is not a good solution for me.
    By the way the same load works well with te standart cubes.
    I use BI7 but I use BW3.5 business content.
    What could be the reason for such problems?
    Regards,
    Hadar

    Hi Hadar,
    We have exactly the same proble. Have you found a solution to it? I'm using Datasource 0HR_PT_2 to load data into Infocube ZPT_C01 (a copy of 0PT_C01). The monitor of the infopackage is green. There are no errors whatsoever. The status for the request in the Infocube>Manage is set to yellow and the data is not available for reporting. I can set it manually to green, but as you said yourself, it'd be nice to have an automated wway of doing this. Is there any way around this problem?
    Thanks
    Michalis

  • Planning cube request status yellow

    My transaction cube all the while has requests of reportable status. Now, new requests generated by planning processes are in yellow status (QM & technical).
    I would like to find out how to tell what is wrong with the yellow requests or is it that this is due to auto maintenance is switched off. How to tell?
    What is the impact if I switch it on as green?
    Pls advice. Full Points will be awarded to the first clear answer.
    Regards
    Pascal Gabin

    As mentioned - the yellow request is simply an open request, which means if users enter data it will go in that request.
    It is important to use the Most Recent Data variable on the Request to make sure the open request gets included in any queries.
    You can close the request, turning it green, and then a new open request will be created when the users enter more data.  The system automatically does this whenever the row count in the Request exceeds a certain threshold (sorry - drawing a blank at the moment as to what the threshold is)

  • Request status changed!

    Hi,
    in the manage tab of data target when i see the status of the request it is yellow and added records and transferred records has adifference of almost 40000.
    but when i click monitor button, it goes to the monitor screen with following msg
         " request status changed, trigger follow on events? followed by YES or NO push buttons?"
    why this msg is coming though upload is not yet completed?
    Thanks,
    Ravi

    This message indicates that there is some change in the data load between now and ur previous visit. If you choose YES, it refreshes and displays the latest status. If you choose NO, it shows the status of ur last visit
    Hope it helps!

  • Payment Process Request Status Report - unmask bank account number

    Dears,
    My requirement is to unmask bank account number in Payment Process Request Status Report (short code: IBY_FD_PPR_STATUS_PRT). It is possible to achieve?
    Thanks for any help and suggestions.
    Rgds,
    Marcin

    Sunil wrote:
    Guys,
    Can you please tell me what is the Data Definition name associated with Payment Process Request Status Report.
    Looking forward to your replies.
    Thanks.
    -SunilLogin to (XML Publisher Administrator) responsibility and click on Templates, query "Payment Process Request Status Report" and click on Go and this should show the "Data Definition". You can also click on "Payment Process Request Status Report" link and get all the details (Template Files, File name, Localized/Translatable Template ..etc).
    Thanks,
    Hussein

  • InfoPackage error message "Subsequent update (requests) : Status unknown "

    After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown "  and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
    Thanks!
    Luda

    Hi,
    Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
    Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
    some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
    If possible let me know what is error message.
    Regards,
    Vishwa.

  • Customize Data Definition for Payment Process Request Status Report

    R12.1.1 Payables
    I have to add some extra fields to "Payment Process Request Status Report" when processing payments.
    What package do I have to customize?
    Is this IBY_FD_EXTRACT_GEN_PVT? If so, where do I have to modify?
    I have to add project and task information stored in ap_invoice_distributions_all table.
    Thanks,
    Joon

    Sunil wrote:
    Guys,
    Can you please tell me what is the Data Definition name associated with Payment Process Request Status Report.
    Looking forward to your replies.
    Thanks.
    -SunilLogin to (XML Publisher Administrator) responsibility and click on Templates, query "Payment Process Request Status Report" and click on Go and this should show the "Data Definition". You can also click on "Payment Process Request Status Report" link and get all the details (Template Files, File name, Localized/Translatable Template ..etc).
    Thanks,
    Hussein

  • STATUS YELLOW FOR REQUEST

    Hai all
    I am getting status yellow for request in bi after scheduling info package ( after migeration of data source)
    and in short dump of dataware house work bench I am getting following error : CONNE_IMPORT_WRONG_COMP_TYPE
    EXCEPTION :CX_SY_IMPORT_MISMATCH_ERROR
    AND TEXT OF ERROR AS ( ERROR WHEN ATTEMPTING TO IMPORT OBJECT " HIST2 " )
    THANKS
    CHAITHANYA

    Hi,
    Check is there any Start/Individual routines(ABAP) are there? Usally i occurs when exception raise.Try to debug the update rule solve your problem.
    Regards,
    Saran

  • Request status in infocube is always in yellow status..

    Hi Friends,
    We are loading the data from 3 ODS to one infocube but all the requests from ODS to infocube is always haivng yellow status ( even though load is completed without any errors). We are manually changing the status to Green.
    Any suggestions regarding this problem...
    Thanks in advance

    Symptom
    All requests in InfoCubes have the QM status 'yellow traffic light'.
    Solution
    In the InfoCube administration in the menu
    'Environment -> Request handling...'
    activate the flag 'Set quality automatically' on the popup 'Maintenance of the automatisms'.
    This flag was of no importance before BW Release 2.0.
    This flag is interpreted actively as of BW Release 2.0. For InfoCubes where this flag is deactivated, every request must be set manually to green (available for reporting) or red (incorrect) by a QM action.
    As a result, the individual request can have a different status independent from its monitor load status in different InfoCubes.
    After upgrading from BW1.2B to BW2.0, the flag is interpreted, but is not set for any of the old InfoCubes.
    Therefore data, including old data, is not automatically visible in reporting, if it is not rolled up or compressed.
    In order to accomplish this, you can either activate the flag 'Set quality automatically' or set every request manually to green (administering the InfoCube on the 'Requests' tab in column 'QM status of the request after update').
    This is a button column that only affects the status of this request in this InfoCube!
    By setting the QM status in the monitor for the load log of this request you can set all QM statuses of this request in all updated InfoCubes simultaneously.
    If you change this flag, you choose button 'Refresh' in the tabstrip 'Requests' so that the flag will interpreted and the requests are set to 'Green' in the InfoCube and thus displayed in Reporting.

  • Request Status Stay Yellow

    Hi Expets,
    I am using load 0HR_PT_2.
    Because the load gets warning in the source system the request stay in status yellow
    (HR say all the data is good)
    In the Details tab of the monitor under Extraction i see the warning
    "warnings have appeared when extracting data" (message R3 401)
    And i have to change it to green every morning (because all the data is in received in to the BW)
    how can ignore the warnings or chagne it to green automaticly?
    Or what else can i do?
    Thanks and BR,
    Or.

    Hi,
    In the DTP on the extraction tab you can set the DTP extraction mode to ignore warning and make the request status as green. Once you do this setting your request will become green automatically.
    But I don't know if there is any similar setting in BI 3.5.
    Regards,
    Durgesh.

  • Unable to manually set the BW request status from hanged yellow state

    Hi All,
    We were running a BW upload when it failed due to some ABAP dump. The request remained in the status yellow.
    We tried to manually set the status to red or green in RSA1--> manage (infoprovider)
    This did not allow me to reset the status there.
    I searched the SDN and found this blog: http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/10/23/deleting-dtp-requests-when-the-dtp-step-is-hanged
    But in our case the table : RSBKREQUEST shows "USTATE" and "TSTATE as "0"(zero).  I can reset the status only when it shows 5. So running RSBM_GUI_CHANGE_USTATE in SE37 to reset the status to "0" (zero) is not an option here.
    Iam sure others would have come across this situation before. If you could throw some light on how to reset the BW request status to RED or Green so that I can restart the load again.
    Your help is really appreciated.
    Thanks
    Manmath

    Hi,
    please check the below tables have your DTP request ID.
    Note: Be aware the deleting the request form the data base tables
    RSBKREQUEST
    RSREQDONE,
    RSREQICODS,
    RSICCONT
    Thanks,
    Phani.

  • Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

    Hi All,
    I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    awebsctl.log file has below errors:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
    Catalog Website is working.
    Thanks & Regards, Kedar

    Hi Jason,
    Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
    IIS Website: Default Web Site
    Port Number: 80
    with default value for Web Application Name configured.
    For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate. 
    Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
    Possible cause: The designated Web Site is disabled in IIS. 
    Solution: Verify that the designated Web Site is enabled, and functioning properly.
    For more information, refer to Microsoft Knowledge Base.
    And awebsctl.log has the below error lines:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    STATMSG: ID=8100
    What should I check from IIS side?
    Application Catalog Website is functioning properly.
    Thanks & regards,
    Kedar
    Thanks & Regards, Kedar

  • Server0 process in yellow and in status "starting apps" from many times

    Hi to all,
    platform windows/SQL
    I have a problem , I just made a system copy of my BI-Java (NW 7.0 SR3 ) using database independent system copy method.
    I make the export : all OK.
    I make the import ( system copy tool sapinst ) : All ok without errors.
    Now I'm tryng to start the Java ap server ( ABAP IS UP AND WORKS ) but it doesn't start : in MMC I see the java server0 process in yellow and in status "starting apps" from many times.
    Please help , what can I do ?

    I Eric ,
    I waited , but still yellow :
    here is the dev_server0 , it is very very  long file so i post most important parts of the log
    trc file: "F:\usr\sap\JBX\JC00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID5856350
    pid         : 2460
    system name : JBX
    system nr.  : 00
    started at  : Mon Nov 15 18:32:02 2010
    arguments       :
           arg[00] : F:\usr\sap\JBX\JC00\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\JBX\SYS\profile\JBX_JC00_sappino
           arg[02] : -DSAPINFO=JBX_00_server
           arg[03] : pf=F:\usr\sap\JBX\SYS\profile\JBX_JC00_sappino
    [Thr 1676] Mon Nov 15 18:32:02 2010
    [Thr 1676] *** WARNING => INFO: Unknown property [instance.box.number=JBXJC00sappino] [jstartxx.c   841]
    [Thr 1676] *** WARNING => INFO: Unknown property [instance.en.host=sappino] [jstartxx.c   841]
    [Thr 1676] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 1676] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties]
    -> ms host    : sappino
    -> ms port    : 3901
    -> OS libs    : F:\usr\sap\JBX\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sappino
    -> ms port    : 3901
    -> os libs    : F:\usr\sap\JBX\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID5856300  : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID5856350  : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID5856300            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
    -> [01] ID5856350            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
    [Thr 1676] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 1676] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 2796] JLaunchRequestFunc: Thread 2796 started as listener thread for np messages.
    [Thr 1116] WaitSyncSemThread: Thread 1116 started as semaphore monitor thread.
    [Thr 1676] Mon Nov 15 18:32:03 2010
    [Thr 1676] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 1676] CPIC (version=700.2006.09.13)
    [Thr 1676] [Node: server0] java home is set by profile parameter
         Java Home: C:\JAVA_SDK_64BIT
    [Thr 1676] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\JBX\JC00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID5856350]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\JAVA_SDK_64BIT
    -> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -XX:NewSize=341m -XX:MaxNewSize=341m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:PrintGCDetails -XX:+PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version    : 1.4.2_26-b03
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 2048M
    -> init heap size     : 2048M
    -> stack size         : 2M
    -> root path          : F:\usr\sap\JBX\JC00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\JBX\JC00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\JBX\JC00\exe\jstartup.jar;F:\usr\sap\JBX\JC00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 1676] JLaunchISetDebugMode: set debug mode [no]
    [Thr 2372] JLaunchIStartFunc: Thread 2372 started as Java VM thread.
    [Thr 2372] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
         Java Parameters: -Xss2m
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -verbose:gc
    -> arg[  5]: -Djava.awt.headless=true
    -> arg[  6]: -Dsun.io.useCanonCaches=false
    -> arg[  7]: -Djava.security.policy=./java.policy
    -> arg[  8]: -Djava.security.egd=file:/dev/urandom
    -> arg[  9]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 10]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 11]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 12]: -XX:NewSize=341m
    -> arg[ 13]: -XX:MaxNewSize=341m
    -> arg[ 14]: -XX:MaxPermSize=192m
    -> arg[ 15]: -XX:PermSize=192m
    -> arg[ 16]: -XX:+DisableExplicitGC
    -> arg[ 17]: -XX:+PrintGCDetails
    -> arg[ 18]: -XX:+PrintGCTimeStamps
    -> arg[ 19]: -XX:SurvivorRatio=2
    -> arg[ 20]: -XX:TargetSurvivorRatio=90
    -> arg[ 21]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 22]: -verbose:gc
    -> arg[ 23]: -Dsys.global.dir=F:\usr\sap\JBX\SYS\global
    -> arg[ 24]: -Dapplication.home=F:\usr\sap\JBX\JC00\exe
    -> arg[ 25]: -Djava.class.path=F:\usr\sap\JBX\JC00\exe\jstartup.jar;F:\usr\sap\JBX\JC00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 26]: -Djava.library.path=C:\JAVA_SDK_64BIT\jre\bin\server;C:\JAVA_SDK_64BIT\jre\bin;C:\JAVA_SDK_64BIT\bin;F:\usr\sap\JBX\JC00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;F:\usr\sap\JBX\SYS\exe\uc\NTAMD64
    -> arg[ 27]: -Dmemory.manager=2048M
    -> arg[ 28]: -Xmx2048M
    -> arg[ 29]: -Xms2048M
    -> arg[ 30]: -Xss2M
    -> arg[ 31]: -DLoadBalanceRestricted=no
    -> arg[ 32]: -Djstartup.mode=JCONTROL
    -> arg[ 33]: -Djstartup.ownProcessId=2460
    -> arg[ 34]: -Djstartup.ownHardwareId=M1883233260
    -> arg[ 35]: -Djstartup.whoami=server
    -> arg[ 36]: -Djstartup.debuggable=no
    -> arg[ 37]: -Xss2m
    -> arg[ 38]: -DSAPINFO=JBX_00_server
    -> arg[ 39]: -DSAPSTARTUP=1
    -> arg[ 40]: -DSAPSYSTEM=00
    -> arg[ 41]: -DSAPSYSTEMNAME=JBX
    -> arg[ 42]: -DSAPMYNAME=sappino_JBX_00
    -> arg[ 43]: -DSAPDBHOST=SAPPINO
    -> arg[ 44]: -Dj2ee.dbhost=SAPPINO
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 2372] Mon Nov 15 18:32:04 2010
    [Thr 2372] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 3844] Mon Nov 15 18:32:07 2010
    [Thr 3844] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 3844] Mon Nov 15 18:32:08 2010
    [Thr 3844] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 3844] Mon Nov 15 18:32:09 2010
    [Thr 3844] JLaunchISetClusterId: set cluster id 5856350
    [Thr 3844] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 3844] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    Mon Nov 15 18:33:09 2010
    66.769: [GC 66.779: [DefNew
    Mon Nov 15 18:33:12 2010
    : 174592K->12719K(261888K), 2.4968787 secs] 174592K->12719K(2009856K), 2.5007114 secs]
    Mon Nov 15 18:33:28 2010
    85.012: [GC 85.019: [DefNew
    Mon Nov 15 18:33:31 2010
    : 187311K->15802K(261888K), 2.9950002 secs] 187311K->15802K(2009856K), 2.9962968 secs]
    Mon Nov 15 18:33:42 2010
    99.362: [GC 99.363: [DefNew
    Mon Nov 15 18:33:43 2010
    : 190394K->18114K(261888K), 1.3817075 secs] 190394K->18114K(2009856K), 1.3817727 secs]
    Mon Nov 15 18:34:04 2010
    121.270: [GC 121.270: [DefNew: 192706K->22709K(261888K), 0.4353252 secs] 192706K->22709K(2009856K), 0.4354424 secs]
    Mon Nov 15 18:34:14 2010
    131.077: [GC 131.079: [DefNew
    Mon Nov 15 18:34:15 2010
    : 197301K->29493K(261888K), 0.9813876 secs] 197301K->29493K(2009856K), 0.9823920 secs]
    [Thr 3344] Mon Nov 15 18:34:36 2010
    [Thr 3344] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    Mon Nov 15 18:34:44 2010
    160.965: [GC 160.966: [DefNew
    Mon Nov 15 18:34:47 2010
    : 204085K->40068K(261888K), 3.8189779 secs] 204085K->40068K(2009856K), 3.8194810 secs]
    [Thr 3532] Mon Nov 15 18:34:54 2010
    [Thr 3532] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 4932] Mon Nov 15 18:34:57 2010
    [Thr 4932] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
    Mon Nov 15 18:35:09 2010
    186.312: [GC 186.315: [DefNew: 214660K->44513K(261888K), 0.4742509 secs] 214660K->44513K(2009856K), 0.4773469 secs]
    [Thr 3844] Mon Nov 15 18:38:32 2010
    [Thr 3844] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    Mon Nov 15 18:39:18 2010
    435.575: [GC 435.576: [DefNew: 219105K->48184K(261888K), 0.2394759 secs] 219105K->48184K(2009856K), 0.2397480 secs]
    Mon Nov 15 18:39:20 2010
    Excluding compile:  com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
    Mon Nov 15 18:39:23 2010
    440.506: [GC 440.506: [DefNew: 222776K->50686K(261888K), 0.1335379 secs] 222776K->50686K(2009856K), 0.1335965 secs]
    Mon Nov 15 19:42:07 2010
    [Unloading class sun.reflect.GeneratedMethodAccessor14]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor127]
    [Unloading class sun.reflect.GeneratedMethodAccessor13]
    [Unloading class sun.reflect.GeneratedMethodAccessor105]
    [Unloading class sun.reflect.GeneratedMethodAccessor99]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor135]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor4]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor96]
    [Unloading class sun.reflect.GeneratedMethodAccessor128]
    Mon Nov 15 19:42:08 2010
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor17]
    [Unloading class sun.reflect.GeneratedMethodAccessor119]
    [Unloading class sun.reflect.GeneratedMethodAccessor64]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor29]
    [Unloading class sun.reflect.GeneratedMethodAccessor47]
    [Unloading class sun.reflect.GeneratedMethodAccessor86]
    [Unloading class sun.reflect.GeneratedConstructorAccessor72]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor14]
    [Unloading class sun.reflect.GeneratedMethodAccessor109]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor82]
    [Unloading class sun.reflect.GeneratedMethodAccessor156]
    [Unloading class sun.reflect.GeneratedMethodAccessor147]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor94]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor65]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor93]
    Mon Nov 15 19:42:09 2010
    [Unloading class sun.reflect.GeneratedMethodAccessor107]
    [Unloading class sun.reflect.GeneratedMethodAccessor142]
    [Unloading class sun.reflect.GeneratedSerializationConstructorAccessor2]
    Mon Nov 15 20:19:06 2010
    : 1488916K->1046521K(1747968K), 3204.1629115 secs] 1749638K->1046521K(2009856K), 3204.1631834 secs]

  • How do i test a record containing status E0008 and not containing status I0002

    hello all,
    how do i test a record containing status E0008 and not containing status I0002  for a given WBS Element....
    the data(like pspnr, posid and objnr from table PRPS are avialable in internal table it_prps)....

    Hi,
    You can check the received table from the function module as per your condition.
    loop at it_prps.
         call function STATUS_READ and pass objnr
              "suppose tables parameter data is in table itab
         Read table itab with key STAT = 'E0008'. "check for E0008
           if sy-subrc = 0.
              read table itab with key stat = 'I0002'. "if E0008 exists then check for I0002
                   if sy-subrc = 0.
                       "both status E0008 & I0002 exists so delete this record from it_prps
                        delete it_prps.
                   else.
                       "only status E0008 exists.
                   endif.
         endif.

  • HT4907 i am trying to set up an airdisk that is connected to my parents airport extreme, though next to my iCloud account details i get a yellow status light and can't get a hold on the airdisk being connected to an other internet connection..what should

    i am trying to set up an airdisk that is connected to my parents airport extreme,
    though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
    sharing is enabled and i entered the right account details.
    the disk shows up connected to my parents network, but i want to access it from my place as well

    Encryption wouldn't matter except for Wifi.
    While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    As far as Memory, that's sort of easy, find your eMac here...
    http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
    As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Maybe you are looking for

  • IPod no longer works with car stereo since upgraded MBA & iTunes

    My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can'

  • Can not restore data files from backup set

    I am trying to restore Server A's backup data to Server B (they are all oracle11g) using rman. The restore commands is below: rman target /; shutdown immediate; startup nomount; restore controlfile from '/usr/local/oracle/backup/20100418/ctl_xxx' alt

  • SharePoint 2013 User Profile Synchronization service problem

    After one week trying (three clean installs of SharePoint 2013), I haven't succeed to start "User Profile Synchronization service". Environment: Domain environment with two Windows Server 2012 R2 domain controllers.  Fully qualified domain name match

  • Changing resolution of images ?

    I like to shoot my pics in the largest resolution because it gives me the best print quality.  However, when I email my images to family and friends I like to reduce them in size to normally 640 x 480 to make them easier to view especially on older s

  • Will there be an version of Flash Builder 4.7 for PHP?

    Flash Builder for PHP is sensational, it's a complete solution for web development, much better than Flash Builder itself I think. Does adobe have a plan of releasing Flash Builder 4.7 for PHP?