Request to cancel a transaction

I want to cancel the deal in icloud and keep the basic memory

Then contact the Apple store.  Nobody here can help.  These are user to user forums.

Similar Messages

  • Infoview: A request was cancelled

    When I go into infoview and click on the actual name of the report, instead of clicking "schedule or history" I am prompted with the parameter dialog box right away.  I notice there are only 2 parameter dialog boxes when there needs to be 7 parameter dialog boxes.
    It appears that there is an older version of the report when you click on the actual name of the report in infoview.   But if you go into history or click schedule and select the parameters it shows 7 parameters and that's correct.
    When I click on the actual name of the report I go to the parameter screen and select from my two parameter dialog box and then proceed to run the report.  After about five minutes of running the report comes back with this error message ...
    CrystalReportViewer
    A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
    Unable to retrieve Object.
    A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
    We use CRXI R2 on our development machines to create reports.
    Any thoughts on how to correct this problem?

    The parameters in this report are connecting with a stored procedure via the Record Selection screen in Crystal Reports.
    I went into CMC and changed the 7 parameters to "Prompt" and this fixed the problem of me not being able to see all 7 parameters before.   So now all the parameters are visible when I click on the report name in infoview. 
    I also tried to run the report in infoview by clicking the report title as I did before and I choose my options for all of the 7 parameter dialog boxes and ran the report.  The report takes about 2-3 minutes and comes back with the error....
    CrystalReportViewer
    A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
    Unable to retrieve Object.
    A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server.
    I ran the crystal report on the server using CRXI R2 and it worked fine.  So we know the report is functioning properly.
    I almost think this is a security issue, do I need to restart a particular service on the server?

  • Your request was cancelled. The necessary security privileges

    I downloaded this example and ran it against the BusinessObjects server I got where
    http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/809d64c6-461c-2c10-f4bd-e499c25d6a38?quicklink=index&overridelayout=true
    I tried to view a simple report and I got this message. This message appears with any of the reports ones that were already created or ones that we created. The user I am running on is a administrator and if I login to actual server through a web 
    browser the report works fine.
    Your request was cancelled. The necessary security privileges could not be verified. Please contact your system administrator.
    BusinessObjects Version XI 2.0
    .Net Framework 4.0
    Anyone have any ideas ?

    1. try passing the non encoded token e.g. BOToken = enterpriseSession.getLogonTokenMgr().createLogonToken("", 120, 100);
    2. try using getDefaultToken() and see if that works.
    3. Have you tried usign openDocument.jsp instread?
    4. are you redirecting to this url? 'http://[server]:8080/BOE/CrystalReports/viewrpt.cwr?id='repId'&apstoken=[token]';
    Java uses double quote " rather than single quote ' for string declaration.

  • An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are try

    hi i am getting this error.
    An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are trying to view does not have the required property 'SI_FILES'. Please contact your system administrator
    please do the nedful.

    yeah Ted Ueda,
    what you are saying is correct. i am getting this output for
      report.getProgID() is CrystalEnterprise.Report.
    can you elaborate this. i am new to this. and also please let me know how to start and if u have any materials on this please forward to [email protected] and [email protected]
    please let me know which is best book for beginers.
    Thanks & Regards,
    Purushotham Podaralla

  • TFS Integration Platform Error while Syncing - Caught and converted, The request was aborted: The request was canceled

    Hello,
    We are doing a 2-way version control sync between TFS 2013 servers. 
    TFS A - Project A is getting synched with TFS B - Project A.
    TFS A - Project A has got all the code and files, whereas TFS B - Project A is empty.
    Previously we have synced TFS 2013 projects across servers with out any error or issues. Today we came across an issue (check log at end of post) and hope Microsoft can
    provide some guidance on this. Following is the problem we are facing today:
    We have configured the TFS Integration platform tool for VC - 2 way sync and started the migration. Current
    status is that the discovery, analysis is complete and migration is half way when I started to get such errors
    (check log at end of post) .
    Note that the migration has not stopped...
    After doing some research and googling I understand that the reason for this error is that by default if
    an individual file transfer cannot complete 16MB in 5 minutes, the operation will fail. And the solution to this is to modify
    chunk size in the file of "TfsMigrationShell.exe.config". I have few questions regarding this...
    Question 1:Is
    above understanding and solution correct? I also notice that this error appears for every huge file (approx >30MB), is there any timeout setting at the target server? Is this something to be changed at the Tool level config or the Target IIS level
    config?
    Question 2: Suppose
    I do not change the config setting, then huge files are skipped due to this error. However, after the migration of the other files is finished, then, will the tool retry to sync the skipped (huge) files? Or has it skipped them forever?
    Question 3:
    Suppose I modify
    chunk size in the file of "TfsMigrationShell.exe.config", then, which of the following do I need to do (give me the best solution among the 3 below)
    a) Do I need
    to restart the migration (by deleting and recreating the project on the 2nd TFS Server and re-starting migration)? 
    b) Do
    I need to create a new configuration and restart migration?
    c) Do I need to restart the sync service?
    The concern here is that we have got 3 more jobs (TFS
    Integration tool configurations) running parallelly that
    is syncing Work Items & VC of other TFS projects and want to make sure that restarting the TFS Integration Job Service will not have any negative impact on the other jobs as well as no negative impact on the current migration job...
    Microsoft, Please advice. Thanks!
    Log:
    [1/21/2015 10:55:39 AM] AsyncUploadFileState.Completed -- caught and converted:
    [1/21/2015 10:55:39 AM] Microsoft.TeamFoundation.VersionControl.Client.VersionControlException: C:\TfsIPData\10\ications\MDM Folder\Binaries\v9.5\DMS Web Service Release 1.5.zip: The request was aborted: The request was canceled. ---> System.Net.WebException: The request was aborted: The request was canceled. ---> System.IO.IOException: Cannot close stream until all bytes are written.
    [1/21/2015 10:55:39 AM] at System.Net.ConnectStream.CloseInternal(Boolean internalCall, Boolean aborting)
    [1/21/2015 10:55:39 AM] --- End of inner exception stack trace ---
    [1/21/2015 10:55:39 AM] at System.Net.ConnectStream.CloseInternal(Boolean internalCall, Boolean aborting)
    [1/21/2015 10:55:39 AM] at System.Net.ConnectStream.System.Net.ICloseEx.CloseEx(CloseExState closeState)
    [1/21/2015 10:55:39 AM] at System.Net.ConnectStream.Dispose(Boolean disposing)
    [1/21/2015 10:55:39 AM] at System.IO.Stream.Close()
    [1/21/2015 10:55:39 AM] at System.IO.Stream.Dispose()
    [1/21/2015 10:55:39 AM] at Microsoft.TeamFoundation.VersionControl.Client.FileUploader.UploadChunk(FileStream fileContentStream, Int64 end)
    [1/21/2015 10:55:39 AM] --- End of inner exception stack trace ---
    [1/21/2015 10:55:39 AM] at Microsoft.TeamFoundation.VersionControl.Client.Workspace.EndUploadFile(IAsyncResult asyncResult, PendingChange& pendingChange, Byte[]& uploadedContentBaselineFileGuid, Int64& uncompressedLength)
    [1/21/2015 10:55:39 AM] at Microsoft.TeamFoundation.VersionControl.Client.Workspace.AsyncUploadFileState.Completed(IAsyncResult asyncResult)

    Hi Charles,
    I have been doing in depth research and testing of this and here are my findings:
    Replies to your points:
    1) It failed with UploadChunkSize value change. Tried 1MB, 500KB, even 100KB. Fails with same error! Is there any other setting we can change for the timeouts at the target TFS server also?
    2) The huge files are not skipped. The migration loops on the failed files and doesn't continue to process the next lot of files. So the migration is blocked on the huge files.
    3) OK. Thanks. 
    Please see below the finding on when migration succeeds and when it fails:-
    Scenario 1:
    a) Where Migration fails:
    TFS A is in India and TFS B is in UK. Both TFS are on different domain. Migration tool is installed on same machine as TFS A. There is a firewall that allows the access from TFS A machine to TFS B machine. The migration tool fails to work in this scenario
    when it encounters a file size approx > 8MB. I tried setting the UploadChunkSize value to 100KB. Yet it failed!
    b) Where Migration works:
    However, if the files are approx less than 3MB then the migration works without any errors.
    Scenario 2 where TFS migration tool works:
    TFS A is in India and TFS B is also in India (located closeby). Both TFS are on different domain. Migration tool is installed on same machine as TFS A. There is no firewall in this case. No changes were made to UploadChunkSize value and files with size
    of 10's and 100's of MBs got synced without any issue.
    Questions
    Question 1: Can we conclude now that there is some issue with the firewall or network in case of scenario 1? As mentioned above Scenario 1 works if file size is less then approx 3MB.
    Question 2: Is there any timeout setting on the Target TFS server which can be set so that it waits for the file without timing out?
    Thanks for any help...

  • Requesting a list of transaction codes with starts from sd and fi..........

    hi,
    sap gurus,
    requesting a list of transaction codes which ends from SD point of view and
    starts with FICO module.
    i.e. which deals with posting of revenues from the customer to A/R.
    plz requesting to find a solution for my question.
    regards,
    balaji.t
    09990019711.

    hi
    T.codes SD
    http://www.sap-img.com/sap-sd/sap-sd-transaction-codes-list.htm
    http://www.sap-img.com/sap-sd/task-specific-sd-transaction-codes.htm
    http://www.sap-img.com/sap-sd/task-specific-sd-transaction-codes-2.htm
    http://www.sap-img.com/sap-sd/sap-sd-tcodes-for-india.htm
    http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
    Reports
    http://www.sap-img.com/sap-sd/standard-sap-sd-reports.htm
    Tables :
    http://www.sap-img.com/sap-sd/important-tables-for-sap-sd.htm
    nagesh

  • I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

    I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

    These are user forums. You are not speaking to Apple. We can't assist you. You must contact Apple directly in your country.
    Customer Service: Contacting Apple for support and service - this includes international calling numbers.

  • Need to find the transport request no for a transaction code

    Hi to all experts,
    how can i find out the transport request for a transaction code

    Hi,
    - go to se10
    - on initial screen choose from applicaiton toolbar Transport Organizer Tools (a hammer icon)
    - choose Search for Objects in Requests/Tasks
    - on next screen in Object Selection frame type new object type (below Data Element), type in TRAN which denotes transaction
    - select checkbox next to it and type in transaction name you are looking for on the right
    - on the frame below check Modifiable and Released
    - run
    - you will get all request where this object (transaction) reside
    Regards
    Marcin

  • The request was aborted: The request was canceled.

    I am trying to upload some files through c# on Azure. But i am getting below error on a particular system.
    The request was aborted: The request was canceled.
    I ran fiddler and get the following response.
    <?xml version="1.0" encoding="UTF-8"?><request protocol="3.0" version="1.3.23.0" ismachine="1" sessionid="{7D4FD5D2-27F8-45D9-9CB9-94995712087B}" installsource="core" testsource="auto"
    requestid="{8D9DECDD-4920-4AE4-B5FD-B2D9DBC56329}"><os platform="win" version="6.1" sp="Service Pack 1" arch="x86"/><app appid="{22BC5D71-241A-4198-94D2-4A45297A4910}" version="1.3.23.0"
    nextversion="" lang="" brand="GGLS" client="" installage="251"><updatecheck/><ping r="-1"/></app><app appid="{BD53C92C-0EDE-40B1-9E29-DA95D1F72764}" version="1.0.0.1"
    nextversion="" lang="" brand="" client=""><updatecheck/><ping r="-1"/></app></request>
    HTTP/1.1 504 Fiddler - Receive Failure
    Date: Mon, 29 Dec 2014 14:13:49 GMT
    Content-Type: text/html; charset=UTF-8
    Connection: close
    Cache-Control: no-cache, must-revalidate
    Timestamp: 19:43:49.762
    [Fiddler] ReadResponse() failed: The server did not return a complete response for this request. Server returned 0 bytes.         
    K K Sanghi

    try
    StorageCredentials sc = new StorageCredentials(storage, accessKey);
    CloudStorageAccount storageAccount = new CloudStorageAccount(sc, true);
    CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient();
    CloudBlobContainer blobContainer = blobClient.GetContainerReference(container);
    CloudBlockBlob blockBlob = blobContainer.GetBlockBlobReference(targetFileName);
    using (var fileStream = System.IO.File.OpenRead(localPathwithFileName))
    blockBlob.UploadFromStream(fileStream);
    catch (Exception ex)
    throw ex;
    K K Sanghi

  • Request flash cancel. Please refund

    Request flash cancel. Please refund

    Hi,
    I have cancelled your Export PDF subscription for the order no. AD014210418.
    Your refund no.is 66181510.
    You will get the refund in 7 business days.
    Regards,
    Florence

  • Wi don't disappear if user cancel the transaction

    Frinends,
    I'm testing one scene, that the wi calls one transaction, and this transaction calls (by button click) other transaction (MIGO).
    If the user cancel the MIGO and go back and exit... I want the wi continue in inbox.
    I remember that once a time Ramki answered me to user EXIT_CANCELLED statement in the method, controlled by a variable. But I don't know how to use this statement.
    how can I do this ?

    Hi Peter,
    That's it, but I didn't understand how to do this...
    1- I have to create a variable ...
    2- if I identify that the user had canceled the transaction, I have to interceptate with the EXIT_CANCELLED macro. But how I call this macro... because I've tested and put it on the end of the method directly, but the wi disapears always.
    eg.: (Is this the way to do that ??????)
    begin ... method
    call ... MIGO
    if (some condition, I don't know)
      EXIT_CANCELLED.
    end if.
    end ...method
    Please, helpe what to do step-by-step.... I think it isn't so hard to do...
    Thanks,
    Glauco

  • I need some help on how i can request to cancel the weekly updates n renewal that was charging my credit card.

    hi anybody help me on how can i request to cancel the weekly renewal of the voice on i tunes. it charged me every week on my creditcard billing.my son alreadyy deleted it on his ipad but continually charging us. please guide us it costs us 2dollars wkly

    ciedevera wrote:
    hi anybody help me on how can i request to cancel the weekly renewal of the voice...
    1) see here...
    iTunes Store: Purchasing and managing auto-renewing subscriptions
    2) Contact the developer...
    3) If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I made a movie purchase assuming I could use an authorization code received to download. How do I cancell the transaction ?

    I made a movie purchase assuming I could use an authorization code received to download. How do I cancell the transaction ?

    dfviens wrote:
    I made a movie purchase assuming I could use an authorization code received to download. How do I cancell the transaction ?
    Not sure what that means.
    But purchases are final as per the Itunes Terms and Conditions. No refunds are available.
    However that does not mean you can't wait to download it.  Or just pause the download until you are at a location where you wish to download it.

  • HT3702 Itunes and auto cc charges???my credit card was charged 19.99 by the apple itunes store....I have no purchases in my history....how do I cancel this transaction? and why is it on there....how do I find out?

    Itunes and auto cc charges???my credit card was charged 19.99 by the apple itunes store....I have no purchases in my history....how do I cancel this transaction? and why is it on there....how do I find out?

    You've checked the purchase history on your account via your computer's iTunes : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
    There are instructions on this page for viewing / managing / stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
    If nothing shows on your iTunes purchase history (you don't have a Mac and have any purchases in the Mac App Store), and you only have the one account, then you should contact your card issuer.
    If something does show on your history but you didn't buy it, and nobody else has access to your account or devices and made the purchase, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I request to cancel my adobe id

    I request to cancel my adobe id
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    Cancel the Cloud http://forums.adobe.com/thread/1439535?tstart=0 may help

Maybe you are looking for