Request to downconvert from LabVIEW 8.0 to LabVIEW 7.1

Hello,
I'd really appreciate it if someone could downconvert this instrument driver library from LabVIEW 8.0 to LabVIEW 7.1.
Thank you!
Brooks
Attachments:
hp34970a.llb ‏2094 KB

Try the Version Conversion Board. That is what it is there for.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Downconvert from labview 8.0 to labview 7.1

Hello everybody, I have LabView 2011 and 7.1 installed but unfortunately I miss any intermediate version..
So I downconverted from 2011 to 8.0 by myself but now I need your help to arrive to 7.1. Can anybody do it?
Thanks a lot,
Denise
Solved!
Go to Solution.
Attachments:
GetValuesFromNumArray.vi ‏22 KB

Hi Denise
See attached
All the best
Chris | Applications Engineer NIUK
Attachments:
GetValuesFromNumArray.vi ‏55 KB

From where can i donwload labview for Ubuntu 10.04

Hi!
Sorry, i feel myself really stupid, but i don't find a page, from where i can download Labview for Linux...
Can anybody write a link here?
Thanks: Koli

I don't found, what you mean...
So i have this site first.
Here i can click just LabVIEW Evaluation (Download LabVIEW or request a LabVIEW evaluation DVD.)
Then i arrive here.
Here i can click on:
Download LabVIEW (847 MB) ->this take me here
Download the exercises
Download LabVIEW -> this too...
In that site i can click in theStart Download (847 MB)
->then i can donwload a windows version (exe)
Or:
We also offer:
LabVIEW for 64-bit systems (891 MB)
LabVIEW for Mac OS X (565 MB)
And these are not linux ones...
So where i need to click?

How to read and display a signal from my PIC Microcontroller onto Labview

Hi,
I am doing a project on a Pulse Oximeter and i am trying to read and display the signal from my PIC Microcontroller on Labview? How do i go about doing it? I am using the PIC16F877 and also making use of the USART?
How do i implement and initialise the USART in PIC16? What are the steps to be taken, please guide me through the process? The link provides information regarding the USART connection, initialisting and stuff? Is it correct to use these codes in my program?Link: http://ww1.microchip.com/downloads/en/AppNotes/00774a.pdf
Also, i am using the RS232 serial interface to connect to the PC? The connector i am using is the DB9 Connector. Which template and VI can i use? Am i supposed to use the NI-DAQmx and VISA? Also, for my USART connection, i am using the MAX232 Driver which is applicable for my application as i am working with +5V. So far, i have been reading and trying out on Labview and the steps i have taken are:
1) Open a New VI and used the Instrument I/O(Read & Display) template?
2) How do i configure the Instrument I/O Assistant Express VI to read the info from my device connected to COM1?
3) I was reading the Labview Manual, 'Getting Started with Labview' and i was following the steps under Page 55, Communicating with an Instrument. Am i on the right track?
4) How do i check and make sure that the port settings of the I/O Assistant and my PIC Micro Match
Please help me out and guide me through the process. I am student at a polytechnic and i am very new to Labview and the software is used as a development tool for the project. I have a deadline to meet and i hope i can get a response as fast as possible. Your help will be kindly and greatly appreciated. I hope to hear from you guys soon.You can e-mail me all your answers at [email protected]
Thank You
Best regards,
Ashwin
Ashwin Kumar Mansukhani
Attachments:
Getting Started with Labview.pdf ‏901 KB

Hi Ashwin,
I am not familiar with the PIC Microcontrollers, but I am assuming you mean that you have the microcontroller sending out serial data that you want to read on another computer with LabVIEW. Please let me know if this is incorrect.
What type of data is coming out of the serial port? Is it ASCII, or binary? The reason I ask this is that the serial communication in LabVIEW is done through a protocol called VISA, which uses ASCII data to send and receive. You can later convert this data into whatever form you need, but this is what it is designed to read and write.
You can check the settings such as baud rate and data bits in a configuration utility called Measurement and Automation Explorer, or MAX. When you open up the MAX interface, you can expand the Devices and Interfaces entry on the left, and then expand the Ports entry to see your serial port. When you highlight this port, select the Port Settings tab at the bottom of the window, and you can see what the current settings are, and change them if you need to. You can also set these parameters in LabVIEW using the VISA Configure Serial Port VI.
You can also test communication in MAX by right clicking on the correct port and choosing Open VISA Session. Then choose the Basic I/O light blue tab, and then go to the Read tab. When you click execute, it should read in what is coming from the serial port. This will allow you to verify that the correct information is coming in before even trying to acquire the data in the LabVIEW environment.
In LabVIEW, the best resource to use the Basic Serial Write and Read example program that ships with LabVIEW. By examining the block diagram of this program, you will be able to see the basic programming flow of serial communication in LabVIEW.
I hope this information was helpful! Please let us know if there's anything else we can help with.
john
Applications Engineer

How can I get Data from the Sound cart in Labview? Does a VI exist?

How can I get Data from the Sound cart in Labview? Does a VI exist?

Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

How to read data from a router by using labview

I am a beginner labview. How to read data from a router by using labview ?

What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML.

Error While requesting a report from web server

Hi All,
The report server has been reinstalled and when i am trying to request a report from the web server the following error occurs.
"Error has occurred: remote server has returned an error: (500) internal server error"
I have restarted the report server and it is running fine. This is very urgent, Can anyone help me on this?
Appreciate a quick reply.
Thanks in advance.
Regards,
Manisha.

Hi Anand,
a. The oracle report server reinstallation for forms and reports.
b. Yes, the HTTP server is up and running
c. reports are run through web application using rwservlet. The report was not listed when doing showjobs on OEM.
I found the database credentials to be missing in the cgicmd.dat, have corrected and then tried to run the reports. the error was still prevelant. but when i ran the reports by requesting it from url i got the following error on OEM
"Terminated with error: <br>REP-1247: BACKGROUND is deprecated. See help for more information. REP-0736: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL. "
even though I have compiled and placed the rdf on the report server.
Please let me know if you need any other information.
Thanks for your reply.
Regards,
Manisha.

From Labview 9.0 to Labview 8.2.

I need a conversion, if possible, from Labview 9.0 to Labview 8.2.
Thank you for the support
Attachments:
Write Std Out with Redirection.vi ‏24 KB

attached
WARNING: There is a bug in LabVIEW 8.2 where you cannot use the error cluster to chain together the Call Library Function Nodes. You will need to either create wrapper VIs for each CLFN or you will need to use case structures around each call.
Attachments:
Write Std Out with Redirection.vi ‏28 KB

UDP Error when upgrading from Labview 8.6 to Labview 2009

I recently updgraded from Labview 8.6 to Labview 2009. I am writing an application to stream data to disk from UDP. My VIs run just fine in Labview 8.6, but when I try to run them in Labview 2009 my UDP read times out despite being able to monitor UDP traffic and see that the data is being sent and nothing in the file is changed from 8.6 to 2009. Is there a known issue related to this?

How are you moniting the UDP traffic? Have you verified that the port you are trying to use is actually available? When you installed 2009 there may have been an additional service installed that may have used the port you're trying to use. If you're running on Windows you can use the command "netstat -n -o -a" to see all the ports that are currently in use, as well as the process ID that has that port open.

How do I troubleshoot "A non-SQL error occurred while requesting a connection from DSN ." errors?

Hello,
Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
We have 2 load balanced app servers:
Windows Server 2008 R2 (virtualized)
ColdFusion 8, Enterprise
And a database server:
Windows Server 2008 R2
SQL 2012
The error in “coldfusion-out.log” is:
A non-SQL error occurred while requesting a connection from <DSN>.
Timed out trying to establish connection
This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
Thanks for your help!

I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

How to send a request to servlet from a java client.

I called a servlet from java client using URL object.
I could establish a connection with server and display
the content(like req.getservername etc.,)
of servlet on client side(DOS prompt).
My question is how do i send a request to servlet from the client.
let me say, i have to send a value as 10 to servlet and do some processing
( like 10*2 = 20) display the output (20) on client side..
It will be appreciated if u can mention the syntax...

just add the query string to the url you use to create the URL object from.

Role info not appearing once role assignment request is submitted from UI

Hi Everyone,
We have a strange problem in our project in IDM 7.2 SP8 where IDM role concept is used which contains privileges (could be role/profile) of backend systems.
Usually when ever a role (i.e IDM role) assignment request is submitted from UI, the activity with the associated info (like user details, role details, audit ID) should be stored in MXI_LINK table from where the info will be fetched and used in next stages of the processing
Even though the information is getting available for most of the cases for all users but some times for few users once the role assignment request is initiated from UI there is no info is getting available in MXI_LINK table corresponding to this activity which is strange.
Because of this problem even though user submits role assignment request no role info getting passed to IDM, set to pending state for the user which is getting meaning of user not submitted any role assignment request at all.
Can any one suggest what are the things that gets involved between these two steps and any troubleshooting hints are highly appreciable.
Regards,
Venkata Bavirisetty

Is this a situation you recreate at will? In other words, is it always happening on the same users? If so, you could put a trace on that user's account then try to add the role and see what that trace log shows. Additionally, you could just follow the links in the chain of the various tasks that kick off when you do a role assignment and check each task / job's job log and see what that tells you. There's got to be an error somewhere along the way that's preventing this from executing properly.

How to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe

Hello, everyone. Using VC++, I have gotten the handle of a *.exe(built by Labview), but I cannot get the button handle. I want to get the button handle and post the message to control the button. How can I do that? When I use the SPY++, the *.exe(built by Labview) have not any child windows which is very different from the *.exe(built by VC++). In SPY++, what is the LVDChild class? How can I send the message to control the button on *.exe(built by Labview)???
That is to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe. How can I get it ?
Thank you!

hummingbird wrote:
Thank you! But I dont kown how to use vi server to raise a value signalling event. Can we put vi server into the vc program? Can you give me some more information or some examples, hehe!
hummingbird
Checkout the LabVIEW ActiveX server interface in the User Manual in Chapter 20, Windows Connectivity and the VI Server Reference in Chapter 17, Programmatically Controlling VIs.
There is a sample for Visual Basic under examples/comm/VBtoLV.frm, which should be quite simple to translate to Visual C as long as you can figure out the basics of ActiveX programming in VC (I have never done anything with ActiveX in VC). For those basics I would recommend some text book or MSDN.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Asynchronous Web Service Request-Reply Invocation from Service Control

Hi all
I need to invoke a reliable web service call using a Service Control. when trying to make that invocation for an operation that returns data. It gives the following exception. For the methods that marked with @Oneway() annotation in the service implementation, it works.
javax.xml.rpc.JAXRPCException: Reliable messaging will only work with one way messages or asynchronous request/response messages.
</bea_fault:stacktrace></detail>]; nested exception is:
weblogic.wsee.jaxrpc.soapfault.WLSOAPFaultException: Reliable messaging will only work with one way messages or asynchronous request/response messages.
Caused by: java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://schemas.xmlsoap.org/soap/envelope/}Server] FaultString [Reliable messaging will only work with one way messages or asynchronous request/response messages.
] FaultActor [null] Detail [<detail><bea_fault:stacktrace xmlns:bea_fault="http://www.bea.com/servers/wls70/webservice/fault/1.0.0">javax.xml.rpc.JAXRPCException: Reliable messaging will only work with one way messages or asynchronous request/response messages.
</bea_fault:stacktrace></detail>]; nested exception is:
weblogic.wsee.jaxrpc.soapfault.WLSOAPFaultException: Reliable messaging will only work with one way messages or asynchronous request/response messages.
So I need to make Asynchronous Request-Reply Invocation from Service Control, which is apparently doesn't happen in this case.
Thanks

Hi HP,
I included the following snippet in job source:
//Set completion strategy to external
jcsJobContext.setCompletionStrategy(CompletionStrategyType.External);
I get the following error when compiled:
JCS-102183: Compile failed for Job Definition SOAP_GlobalWeatherSoap_GetCitiesByCountry (Latest Version): SOAP_GlobalWeatherSoap_GetCitiesByCountry.java:user code 24:40:cannot find symbol symbol : variable CompletionStrategyType location: class com.redwood.scheduler.custom.SOAP_GlobalWeatherSoap_GetCitiesByCountry jcsJobContext.setCompletionStrategy(CompletionStrategyType.External);
I am not able to find any information from the API documentation on the method setCompletionStrategy, so I'm not able to figure what type of variable am i passing, so that i can initialize it. Please shed some light on it.
Also there is no path called Scripting > Built-In Web Services
I have only Scripting>Published Web Services
Thanks
Nanda

Request to downconvert from LabVIEW 8.0 to LabVIEW 7.1

Similar Messages

Maybe you are looking for