Request to have subsections in forum for each mo
Many of the MP3 players Creative makes are called Zen.
Searching the forums is very tedious since searching for Zen will pull up almost every post.
Searching for the other models Zen X-Fi or just X-Fi will give you a message: "x" is a very common word and was not included in your search.
The MP3 player forum also has over 550 pages...What normal person can sort through 550 pages.
On top of that there are many titles that don't say anything except "need help" or "have question"
It would be nice if everyone would put the model they are referring to in their title, but I doubt that will happen.
Creative, it might be better to add subsections for the MP3 Player section for each model MP3 player, so users with Zen players can get information from other Zen users, and not vision or X-fi...etc
Of course moving the existing 2800+ posts into the appropriate subsections would costs millions in man-hours, so make an archi've subsection, and move threads with no activiy for 6 months into that section. If a new user asks a question that an archi'ved post would answer, a more experienced user can help point them to the archi'ved post.
lavinog wrote:
Is the poll over, or does it go away after you vote?
Can we put a link to it on this thread?
Lavinog,
The poll is still on, you should see it just below the Announcements on the main forums page. It should show you the results after you have voted.
Similar Messages
-
How does a content producer create a main category with sub-categories similar to the way many bands have subcategories and artwork for each of their albums?
I think you're talking about an 'Artist Page' in which several podcasts are 'aggregated' into one iTunes Store page? This Apple Tech note deals with the subject (scroll to the bottom of the page):
http://www.apple.com/itunes/podcasts/creatorfaq.html
Although your mention of albums makes me wonder whether there you are talking about albums and songs in the music Library? - podcasts don't come in albums.
You've also asked this in another forum:
I have created a feed for our podcasts, but they are all under one umbrella. We would like to have subcategories under one main category.
'A feed for your podcasts' doesn't make sense - a podcast has one feed (and vice versa). Are you confusing 'episodes' with 'podcasts'? A podcast is a collection of episodes - you can't categorize the episodes separately. The category shows only on the Store page and applies to the entire podcast. The 'Artist' page may again be what you are aiming for - if not perhaps you could post an example of what someone else is doing that you would like to. -
I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?
You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.
-
How do I set up two libraries on one pc so that we have two separate libraries for each iPhone?
Launch it with the Shift key held down, or create a second Windows user account.
(60390) -
I bought an iphone for my daughter and was unaware that we should have a seperate appleid for each.Now we share an id and get eachothers contacts and face time calls. I recently bought another iphone and want to change ids without loosing items and music. How do I do this? The new phone is a 5.
All purchases are always going to be associated to the ID that was used to purchase/download them.
If you create an ID for your daughter you will want to check everywhere it is used to make sure you are not sharing messages and stuff. These would be iTunes/app store, iCloud, iMessages, and FaceTime.
Go thru settings and find all mention of your ID. -
Have a community forum for JavaFX developers?
have a community forum for JavaFX developers?
There is www.javagaming.org which has a JavaFX board at http://www.javagaming.org/index.php/board,58.0.html
-
If I own more than one Mac, do I have to purchase lion for each one?
If I own more than one Mac, do I have to purchase lion for each one?
No... u can click on your purchases holding down the option key and it will allow you to download lion again
copy this from your applications folder to your other mac's application folder and just click install
that's what i did.
i also made a usb key of lion following these instructions...
using Lion DiskMaker
http://osxdaily.com/2011/08/02/easy-way-to-make-lion-install-disk/
< Edited by Host > -
Do we have a separate forum for SAP Project Systems?
hi
do we have a separate forum for SAP Project Systems?
regards
kishhi all
i got the answer
its the PLM forum ie. product life cycle management
Expert Forums » SAP Solutions » Product Lifecycle Management (PLM)
cheers
kish -
Still have to change Context for EACH ODI Object
Correct me if I'm wrong - Even though ODI touts the ability to have one set of code for various physical environments, it doesn't make moving from say DEV to TEST any much easier.
What I mean to say is, even if I create 'InterfaceA' under the Logical Schema 'Phase1' and my Context is 'DEV' pointing to the Physical Schema for 'Development Data Server'; when I want to chance the Context to say 'TEST', I have to go into 'InterfaceA' and make that change to Context 'TEST'.
Now, I have to do this for 'InterfaceA' through 'InterfaceXY' and so on for each Package, Scenario, Procedure and so on.
Point being, there's not centralized mechanism to change all the Contexts for all the objects - therefore this functionality is nothing great.
Might as well copy all the objects to a New Repository and change the Contexts there. Have a Master Rep for each DEV, TEST and PROD.What you need to do is ensure that you don't explicitly specify the context inside your ODI objects such as the interfaces. There is a setting called Execution Context which is what should be selected. Then when you execute your ODI scenarios you choose the execution context and this will be applied to all objects in the execution cycle
-
i have been charge twice for each of the tranactions i made and i would like them back thank you
Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck -
Why do I have separate albums covers for each song
why do I have separate albums covers for each song?
Apple is a business. And a business exists only to make a profit and incidentally render a service. The corporation cares about you equally as much as Microsoft does. C'est la vie!
-
GROUP BY - Is there a way to have some sort of for-each statement?
Hi there,
This discussion is a branch from https://forums.oracle.com/thread/2614679
I data mart I created for a chain of theatres. The fact table contain information about ticket sales, and I have a some dimensions including DimClient and DimTime.
Here is an example of each table:
FactTicketPurchase
TICKETPURCHASEID
CLIENTID
PRODUCTIONID
THEATREID
TIMEID
TROWID
SUMTOTALAMOUNT
60006
2527
66
21
942
40
7
60007
2527
72
21
988
36
6
60008
2527
74
21
1001
40
6
60009
2527
76
21
1015
37
6
60010
2527
79
21
1037
39
6
DDL for FactTicketPurchase
CREATE TABLE FactTicketPurchase(
TicketPurchaseID NUMBER(10) PRIMARY KEY,
ClientID NUMBER(5) CONSTRAINT fk_client REFERENCES DimClient,
-- ProductionID NUMBER(5) CONSTRAINT fk_prod REFERENCES DimProduction,
-- TheatreID NUMBER(5) CONSTRAINT fk_theatre REFERENCES DimTheatre,
TimeID NUMBER(6) CONSTRAINT fk_time REFERENCES DimTime,
-- TRowID NUMBER(5) CONSTRAINT fk_trow REFERENCES DimTRow,
SumTotalAmount NUMBER(22) NOT NULL);
DimClient
CLIENTID
CLIENT#
NAME
TOWN
COUNTY
2503
1
LEE M1
West Bridgford
Nottingham
2504
2
HELEN W2
Hyson Green
Nottingham
2505
3
LEE M3
Lenton Abbey
Nottingham
2506
4
LORA W4
Beeston
Nottingham
2507
5
SCOTT M5
Radford
Nottingham
2508
6
MINA W6
Hyson Green
Nottingham
..cff.
DDL for DimClient
CREATE TABLE DimClient(
ClientID NUMBER(5) PRIMARY KEY,
Name VARCHAR2(30) NOT NULL);
DimTime
TIMEID
FULLDATE
YEAR
SEASON
MONTH
MONTHDAY
WEEK
WEEKDAY
817
02-MAR-10
2010
Spring
3
2
9
3
818
03-MAR-10
2010
Spring
3
3
9
4
819
04-MAR-10
2010
Spring
3
4
9
5
820
05-MAR-10
2010
Spring
3
5
9
6
821
06-MAR-10
2010
Spring
3
6
9
7
822
07-MAR-10
2010
Spring
3
7
9
1
DDL for DimTime
CREATE TABLE DimTime(
TimeID NUMBER(6) PRIMARY KEY,
Year NUMBER(4) NOT NULL,
Season VARCHAR2(20));
I have the following analysis request to perform on this data mart:
Top 5 clients by value of ticket sale for each season
For this requirement I came up with the following query:
SELECT * FROM
(SELECT FacTIC.ClientID, DimCLI.Name, SUM(SumtotalAmount) SumTotalAmount, DimTIM.Season
FROM FactTicketPurchase FacTIC, DimClient DimCLI, DimTime DimTIM
WHERE FacTIC.ClientID = DimCLI.ClientID
AND FacTIC.TimeID = DimTIM.TimeID
AND Season = 'Spring' AND Year = 2010
GROUP BY Season, FacTIC.ClientID, DimCLI.Name
ORDER BY Season ASC, SumTotalAmount DESC)
WHERE rownum <=5;
As you can see, in line 06 of the above query, I am explicitly specifying the season for the query to return.
However what I would like to do is just one query that could autocratically go through the seasons and years available in the time dimension in a fashion similar to a FOR-EACH statement. This way, if we get more years added to the time dimension, we wouldn't have to amend the query.
Is this possible?
Regards,
P.I think I fixed it!
The trick was to look into the r_num value. As soon as I added it to my query I started to see how r_num was being calculated and I realised that I had to add Season to my partition, right after Year.
SELECT Year, Season, TotalAmount, Name
FROM (
SELECT DimCLI.Name
, DimTIM.Year
, DIMTIM.Season
, SUM(FacTIC.SumTotalAmount) TotalAmount
, RANK() OVER (PARTITION BY Year, Season
ORDER BY SUM(FacTIC.SumTotalAmount) DESC
) AS r_num
FROM FactTicketPurchase FacTIC
, DimClient DimCLI
, DimTime DimTIM
WHERE FacTIC.ClientID = DimCLI.ClientID
AND FacTIC.TimeID = DimTIM.TimeID
GROUP BY DimTIM.Year
, DimTIM.Season
, DimCLI.Name
WHERE r_num <= 5 -- Need to amend this line on my data sample to show 2 rows.
ORDER BY Year, Season, TotalAmount DESC;
Looking at my data sample, I got the following:
YEAR
SEASON
TOTALAMOUNT
CLIENTID
2010
Autumn
29
2504
2010
Autumn
26
2503
2010
Spring
25
2503
2010
Spring
14
2506
2010
Summer
26
2506
2010
Summer
26
2504
2010
Winter
28
2503
2010
Winter
26
2506
2011
Autumn
23
2506
2011
Autumn
14
2503
2011
Spring
25
2505
2011
Spring
13
2503
2011
Summer
21
2505
2011
Summer
14
2503
2011
Winter
19
2505
Now, looking at my real data, (considering the top 5 rows, not the top 2), I got:
YEAR
SEASON
TOTALAMOUNT
NAME
2010
Autumn
141
BUSH M225
2010
Autumn
140
DIANA W66
2010
Autumn
136
HANA W232
2010
Autumn
120
DIANA W220
2010
Autumn
120
WILSON M459
2010
Spring
137
DAVID M469
2010
Spring
125
ALEX M125
2010
Spring
124
PETER M269
2010
Spring
115
ZHOU M463
2010
Spring
114
TANIA W304
2010
Summer
138
JANE W404
2010
Summer
105
MINA W8
2010
Summer
97
DAVID M275
2010
Summer
96
CLINTON M483
2010
Summer
93
ANNA W288
2011
Spring
12
LUISE W20
2011
Spring
7
ANNA W432
2011
Spring
7
LEE M409
2011
Spring
7
CHRIS W274
2011
Spring
7
HELEN W136
2011
Spring
7
LILY W114
2011
Spring
7
LUISE W348
2011
Spring
7
LIU M107
2011
Spring
7
VICTORY W194
2011
Spring
7
DIANA W240
2011
Spring
7
HELEN W120
2011
Spring
7
LILY W296
2011
Spring
7
MATTHEW M389
2011
Spring
7
PACO M343
2011
Spring
7
YANG M411
2011
Spring
7
ERIC M101
2011
Spring
7
ALEX M181
2011
Spring
7
SMITH M289
2011
Spring
7
DIANA W360
2011
Spring
7
MATTHEW M63
2011
Spring
7
SALLY W170
2011
Spring
7
JENNY W258
2011
Spring
7 -
How to have a unique value for each record??
could any 1 help me out in this...
I want to have a column name 'Order No' which should be unique.
How to generate a unique value for each record.??could any 1 help me out in this...
I want to have a column name 'Order No' which should be unique.
How to generate a unique value for each record.?? If you are using SQL PLUS to create the table try something like
this:
CREATE TABLE ORDER_TEST (
ORD_NO NUMBER (8) NOT NULL PRIMARY KEY,
ORDERDATE DATE,
CUSTID NUMBER (8) NOT NULL,
SHIPDATE DATE,
TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
(TOTAL >= 0),
CONSTRAINT ORD_FOREIGN_KEY FOREIGN KEY (CUSTID) REFERENCES
CUSTOMER (CUSTID),
CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
-- or a simpler table example
DROP TABLE ORDER_TEST;
CREATE TABLE ORDER_TEST (
ORD_NO NUMBER (8),
ORDERDATE DATE,
CUSTID NUMBER (8) NOT NULL,
SHIPDATE DATE,
TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
(TOTAL >= 0),
CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
note: ORD_NO can also be a primary key
If you are doing the INSERT during runtime from a form first
create a sequence in SQL PLUS to handle the ORD_NO value:
Create SEQUENCE ORDERNO_UNIQUEVAL_sqnc
START WITH 000001
NOMAXVALUE
NOCACHE;
and reference it as the ORD_NO parameter in your INSERT
statement:
ORDERNO_UNIQUEVAL_sqnc.NEXTVAL
note: to maintain data integrity you must use the sequence
everytime you insert a new order to table. To start a new
sequence drop the sequence and re-create it with whatever "START
WITH" value you want.
Hope this helps
Kevin -
Tax Accounts - Is it necessary to have separate tax acct. for each state
I am new at this:
Is it necessary to have separate AR/AP/ account for each tax jurisdiction like state county etc?\
Or do the sales tax reports for payments in SAP produce outstanding taxes per jurisdiction.
I would prefer only one Sales Tax account and hope to have SAP produce the taxes due per jurisdiction.
MikeThanks Suda.
So I only need to setup two tax accounts:
1. One tax account for tracking the AR taxes
2. One tax account for tracking the AP taxes
So, to report the taxes to the different tax jurisdictions, SAP should be able to break then down individually for us to pay them.
I am new at this ... so please be patient.
Mike -
Why do applications have to be packaged for each distribution?
Hi,
Sorry this is probably a stupid question, but i don't understand why it's necessary for each application to be packaged (and patched) by each distribution.
Example: (as i understand it) Mozilla Firefox. Arch has it's own version derived from Mozilla's, and so do the other distributions with their own variations.
Is anyone able to explain how this works and why it's done this way?
Bonus points: If anyone has a link to an article explaining in detail, would be very interesting to readWhen packaging software there are a bunch of questions you're facing. Many have been mentioned before.
This starts with the compile-time configuration regarding which parts of the software should be compiled/used, eg some libraries can use different backends and you can only choose one. Sometimes it's even a matter of licensing. Some distros like to enable experimental features if they don't break the rest of the software, some let you choose (like gentoo's useflags mentioned above).
Filesystem layouts differ: Some prefer /usr/lib/pkgconfig, some /usr/share/pkgconfig; some like /usr/libexec, some don't, some (eg FreeBSD, which isn't linux but with regard to package management faces the same questions) use /usr/local for packages. Some distinguish between binary-only packages by putting them into /opt, some don't. Some actually have /bin, /usr/bin and /usr/local/bin as separate directories
Or you might go a completely different way, too, nobody's forcing you to stick to "standards". I'd also like to point to haiku, also not a linux distro, but there too you have most of the same software packages available, which have to follow different directions there, too.
Default configurations: Some get patched (themed for the distro or for other reasons), some don't.
Init systems: Gentoo (at least last time I checked) defaults to openrc. Most people do not provide openrc scripts in their source repositories, so the packager is responsible for creating these.
Gentoo actually brings up another thing: it allows for some packages to have multiple versions installed, and you can use them explicitly and/or switch your default with `eselect`. (It probably does more than that, I haven't used gentoo in years.) For this of course you need to package your software in a certain way. Eg put your binaries and libraries into a separate folder and symlink them to their desired locations, rather than installing them there directly, since they'd be overwritten by the other versions of the package...
Maybe you are looking for
-
hello.. i have already posted about that in testing-forums, but since xorg 1.6 and kernel 2.6.29 have moved to extra, though i'd create a seperate topic about that. after i have upgraded to xorg 1.6 and kernel 2.6.29 my wacom device (as built-in, not
-
AP Invoice Workflow fails when approver is terminated
We are on EBS 12.1.3. I am trying to find out what is the best practice solution for when approvers are terminated while AP Invoice Approval workflow is running. These are the steps in reproducing the problem: 1. Create invoice and send for approval.
-
Can anyone explain what the 'other' storage consists of and how I can decrease the size please?
-
install windows phone 8.0 sdk on win 10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.
-
Playing music at screensaver = Slow response?
This is a rather intersting issue. I hope someone could reproduce it, so I know it's not just me. I can be playing music in iTunes, and after about 15 minutes, my Macbook Pro kicks in the screensaver. Because iTunes is awesome, it keeps playing, as e