Request to users with Win 8.1 and WP 8.1

Can you please check for me on your Lumia with WP 8.1 the following:
1. Turn off wifi hotspot on Lumia.
2. Check if you are still able to connect to the mobile hotspot on your Windows 8.1 PC.
3. In case you were able to connect, does this force hotspot on your phone to turn back on?
I hope it was clear what I wanted. Thank you for any help.

dimoff wrote:
Can you please check for me on your Lumia with WP 8.1 the following:
1. Turn off wifi hotspot on Lumia.
2. Check if you are still able to connect to the mobile hotspot on your Windows 8.1 PC.
3. In case you were able to connect, does this force hotspot on your phone to turn back on?
I hope it was clear what I wanted. Thank you for any help.
This is a feature added with an update the first part of this year.
If Win8 has connected to the phone hotspot previously this works.
With phone bluetooth turned on you can connect the PC to the phone WiFi without turning on internet sharing on the phone. The phone does everything it would do in all the settings if you manually turned internet sharing on.
http://www.thomasmaurer.ch/2013/10/improved-internet-sharing-in-windows-phone-8-gdr-3-update/

Similar Messages

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall and reinstall iTunes. I get the same failure each time.

Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?

Hello, rodneywjr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
Jason H.

I will combine Win 8.1 and Mac system in Creative Cloud program. Is that possible in same license. Start the work in Mac and continue with Win 8.1 and do presentation on Ipad ???

I will combine Win 8.1 and Mac system in Creative Cloud program. Is that possible in same license. Start the work in Mac and continue with Win 8.1 and do presentation on Ipad ???

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
Check this link to see what is available for an ipad
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

Yoga 2 10inch with Win 8.1 and problem with CCleaner

Hi guys!
I bought my new Yoga 2 10inch with Win 8.1 few days ago and everything was all right, until i installed CCleaner. The CCleaner app window doesn't move smoothly when i'm using it by touch screen and touch pad, choosing the options works slowly and it doesn't display correcly...
Do you have the same problems?
Thanks a lot and sorry for my english

I guy on Youtube made a rough tutorial.
http://www.youtube.com/watch?v=lI8AnNBIlLQ
Englisch subtitles available
In the comments he suggests, to download the Iso with anouther win-8.1-key - no matter which one - and to install the system clean. In his opinion the system will get the key from the hardware. He is writing, that there is just a universal iso. So it's no problem to download an iso with another key, even if your system is a Home-Edition and you download it with a Pro-Key.
I will try this.
Hutson

I have done the softer update and now this system request a connection with a meanie HD and I connector for iTunes I don't understand why ?

I have done the softer update and now this system request a connection with a Mini HDMI connector for iTunes I don't understand why ?
DO I HAVE TO HAVE THE MINI HDMI CONNECTOR TO COMPLETE THE SOFTER UPDATE PROCESS ?

You might be seeing a Micro USB cable (Not HDMI) that is because your Apple Tv is in Recovery Mode due to some reason and it needs to be Restored by connecting it to iTunes on your Computer. So if you have a Micro USB cable ( which comes with Android Smart Phones ) then try to connect your Apple Tv to your computer using the same and with the help of iTunes Restore your Apple Tv to Factory Settings. Go through the below Apple Support kb which says " If your Apple TV still does not respond or if you were unable to follow the above steps "
http://support.apple.com/kb/ht4367

Can i check how many people are using my apple id if so please help there is a new user with my apple id and i dont know who it is

i have multiple people using my apple id which are my brothers and this new guy showed up and set up a new apple id with an ipad mini and i want to track this person down im afraid this will escelate to id theft and i want to check all users of my apple id

Change the password and make sure those people can't access your email.

Default User Template for AD users with Win home dirs

Hi all,
Can anyone tell me if it's possible for AD users with Windows based home directories to get a default user template given to them the first time they login to a Mac bound to AD?
I can give local users and users with home dirs on our Xserve my default user settings via the English.lproj template, but I cannot for the life of me get this to work for those users with Windows based home directories.
This is a biggie since my boss has mandated that ALL our student home directories are to be hosted under Windows from now on...
Thanks in advance.

So you are using roaming profiles on AD and when they log into a Mac you want to setup their default, is that what I am hearing?
You will need to modify the English.lproj on the local machine to setup the default template. Since the mac server is not involved in the authentication and hosting of a roaming AD account with windows home folder, the client creates the home folder initially. Modify the default English.lproj on the clients.

Is there a way to force firefox to send ajax-request when user clicks on a link and redirect occurs?

I'm trying to send ajax-request with web-analytics data when user clicks on a link. But Firefox cancels the request and moves to the link location. Sync requests or waiting for response is not an option because performance is critical.

Correct me if I'm wrong here:
<code>jQuery.data()</code> saves the <code>{"foo": "bar"}</code> JSON object to variable <code>data</code>, and then the <code>s.tl()</code> call sends <code>data</code> to the server, right?
You could use jQuery's [http://api.jquery.com/event.preventDefault/ <code>event.preventDefault()</code>] method to stop the browser from automatically following the link on click. You could wait until the Ajax request was finished before following the link.
<hr>
I hope that solved your problem!
<i>If it did, would you please choose this answer as your solution? It would help other Firefox users to find help on the forums faster and more efficiently. Thanks!</i>
And of course, feel free to post back if you need more help!
Happy browsing!

How can I create system image of Win-7 only on drive with Win-7 (NTFS) and Win-ME (FAT-32) system partitions

I am trying to create a Windows 7 Image Backup on my Windows 7 Ultimate 32 bit PC.
I have two bootable partitions on my hard drive. One is NTFS and contains the Win-7 system files.
The other is FAT-32 and contains a Windows-ME system.
When it comes to selecting the drives (partitions) for backing up, both are marked as System, and both are selected. Both are also "greyed out) - I cannot uncheck them.
Furthermore, the Windows-7 imaging utility supplied with Windows-7 returns an error saying it cannot image the disk because it contains a partition that is not NTFS.
How can I select and image ONLY the NTFS partition that contains the Win-7 system? That is what I want to do.

Any of the products listed below will backup the contents (all partitions) of your disk drive. The only limitation is that you must install the backup software in Windows 7. You will perform a "Disk and Partition" backup by manually selecting
the disk and all partitions (NTFS / FAT32) and the Master boot Record (MBR) on the drive. The destination / where the Image Backup will be stored should be an external USB drive. With a "Disk and Partition" backup you can restore any partition
to your existing drive or the entire backup (to the same disk drive or a new drive).
EaseUS Todo Backup Home V7.5
http://www.todo-backup.com/home/home-backup.htm
Free version:
http://www.todo-backup.com/products/home/free-backup-software.htm
Version comparison chart:
http://www.todo-backup.com/products/home/comparison.htm
Includes: Incremental backup, Disk/partition clone
User's Guide: http://www.todo-backup.com/download/docs/User_Guide.pdf
(Note: Install Todo and then create an "Emergency Disk" before you start creating your first image backup)
Version 7.0 supports XP, Vista, Windows 7, 8 and 8.1
Acronis True Image 2015:
Has a 30 day trial version available, trial Key sent to your Email Address.
Note: Cloning and drive initialization (creating a MBR) are not supported in the trial version.
For the trial version, recovery is available only when booting from an Acronis Bootable Media CD.
Install Acronis and then create a bootable Restore/Rescue Media CD before you start creating your first image backup
http://www.acronis.com/en-us/personal/true-image-comparison/
30 day trial : http://www.acronis.com/en-us/personal/pc-backup/
True Image User Guides and documentation:
http://www.acronis.com/en-us/support/documentation/
2014 supports XP, Vista, Windows 7, Windows 8 and 8.1
Paragon:
Free version: http://www.paragon-software.com/home/br-free/
User'sGuide:
http://www.paragon-software.com/home/br-free/download.html
Home Version $39.95: http://www.paragon-software.com/home/brh/
Support: http://www.paragon-software.com/support/
Macrium Reflect Free:
Free version: http://www.macrium.com/reflectfree.aspx
(no technical support available for the free version)
Macrum Reflect Standard ($49.99)
http://www.macrium.com/personal.aspx
Suport: http://www.macrium.com/ticket.aspx
Note: For users who have a Western Digital disk drive there is a free version of Acronis 2013:
http://support.wdc.com/product/downloaddetail.asp?swid=119
Release notes:
http://support.wdc.com/download/notes/ATI_WD_RN_5962.pdf
Users Guide for WD Version:
http://support.wdc.com/product/downloaddetail.asp?swid=119&type=userguide&wdc_lang=en
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

What is the best way to manage multiple devices with one iMac - different users with seperate itunes accounts or one mac user with different itune logons and libraries?

Hello
I have just purchased an imac which I am very happy with. In our household we also have two iphones (one mine and one husbands) and one ipod (my sons). We all have individual itunes accounts set up on our previous computer (not a mac). We have sepereate apps and music, although there may be the odd occasion where we would like to share a song (if this is possible) across devices.
I am just wondering the best way to manage these devices using the new imac. Should I create individual accounts to logon to the imac, then from within these launch our own itunes accounts and sync our devices with these. Or should I be using one version of itunes, logging on to this with our different itunes usernames and storing things in libraries.
Any help would be greatly appreciated.
Thanks

I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
Regards.

4hrs battery with Win 8.1 and bootcamp?!

Hi,
I installed Win 8.1 on my MBPr via bootcamp and have 3-4 hours battery time in idle, is this normal?! I found out, that CPU Usage in Idle is 30%, but I found the fix with sleep and awake in this forum here. It helped a little bit, now I have 4 hours. But this cannot by normal, or? Anyone an idea what is the problem? Do

Can you look at this option?

Do I need Flash player plug-in with Win 7 Pro and IE11?

Could I have a definitive yes/no answer to, "Do I need a flash player plug-in when I am using 64 bit Windows 7 Professional SP1 and IE11?"
I am using IE11 v.11.0.9600.16476
Flash v.12.0.0.38
I am not, as far as I can see, have any problems viewing anything. But Adobe insist I should be using Flash v.12.0.0.43 and they identify my browser as Gecko.
I understand that Gecko is usually identified as Firefox but is it correctly identified as IE?
Windows 8.1 with IE11 states that it is a plug-in less browser; but is Windows 7 with IE11 plug-in less or not...???
Very confusing!

If you go to http://get.adobe.com/flashplayer/ while using Internet Explorer your browser should be noted as MSIE. If not you have something wrong with your system. You may have some malware on
your system to cause a false indication.
I am using IE11 and when I use Adobe it identifies my browser as Gecko and not MSIE.
Mozilla/5.0 (IE 11.0; Windows NT 6.3; Trident/7.0; .NET4.0E; .NET4.0C; rv11.0) like Gecko
By the way my system is clear of malware.
May I ask again do use the version of flash that Adobe says is compatible with IE or the version that is for plugin based browsers? Or to put it another way is IE11 in Win 7 a plugin less browser?
Davy-D II formerly Davy-D

Iphone 4s. Windows 8.1 hp laptop. Itunes does not see my phone when I plug it in or launch itunes. My other computer sees it no problem, Is there compatibility issues with win 8.1 and itunes? Very frustrating...

Need help getting itunes to recognize my 4s, my older other computers have no issues. I have hp 2000 with windows 8.1..

That didn't work for me....I have done every concievable action to resolve this....now I am getting pissy......Went through all the suggestions on the support page....I am going absolutely nuts here, uninstall, reinstall, set this default to that....NO ONE KNOWS WHY THIS IS HAPPENING OR IT WOULD BE ADDRESSED ALREADY!!!!!!
Sitting right next to my new laptop is the old one that started out with XP on it. Has Win7 and itunes fires right up. I called my brother, he doesn't have apple products. He just bought a new laptop and did the 8.1 upgrade and guess what? Itunes still won't recognise my 4S....
ANY FEEDBACK WOULD BE GREAT. However, keep in mind I have done everything except throw the laptop and the phone.....
IF IT AIN'T BROKE DON'T FIX IT!!!!!!!

I just got a new computer with Win 8.1 and everytime I open firefox I get dozens of popup windows.

I turned this popup option off in the options. Why is this happening? They are all over the screen, some little popup windows and other are full size Firefox. It's driving me nuts. It doesn't happen when I use Chrome. But I don't like Chrome. I'm on Firefox 31.0

I suspect a bad add-on. Since add-ons often are installed externally to Firefox, I suggest starting here:
Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
Then, in Firefox, open the '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Finally, you can "mop up" remaining issues with the scanning/cleaning tools suggested in this support article: [[Troubleshoot Firefox issues caused by malware]].
Does that clear it up?

Request to users with Win 8.1 and WP 8.1

Similar Messages

Maybe you are looking for