REQUEST: U100 1.0G Bios with WIFI on startup

Hello Svet,
Is it possible to make a bios with the wireless card on at startup? My f11 key is broken so I just want to have it on all the time. Also Fn + Ctrl swap. Also have OC on by default when on AC power, but not on by default when running on battery. One more thing (I think this is standard.. can't remember) but when plugging into AC power brightness jumps up to 100% and can be reduced after.
If you need to know right now I'm running your 1.09 bios with fn + ctrl swap.. and have not tried the 1.0G but assume it should work fine.
Donation sent.
Thanks,
Brian

Request is done and has been sent out to your e-mail. [If you unable to find it, check it in "spam" folder]
Here is also a visual map How to activate WLAN, 5 differents ways are now available:

Similar Messages

Request: U100 1.0G Bios with OC on startup

Hi Svet,
I would like the lastest 1.0G modded bios, except the following:
- Regular Ctrl-Fn keys
- Regular logo
- OC is set by default when on AC. When I start it or when back from standby it's ON and I can turn it off only if *not* needed.
- Would it be possible to have Turbo mode on battery instead of eco mode ? So I would not need to run the OC Tool every time. (But startup in standard mode by default, not turbo)
I made a table so it's more clear
START/DEFAULT BUTTON
AC OC REG
BATTERY REG OC
Also, do you have any control over led colors in bios ?
Many thanks :D

Quote from: Aldreth on 28-April-11, 07:11:16
Is there room for sharing? :D
I've been digging around the last couple days trying to get up to date and also solve a minor problem on my U100, where in XP Turbo mode would simply freeze the machine (no BSOD, et al). It works in Windows 7 though, so I figure dodging the problem is OK.
Anyways, no need to ponder that one too hard, just wanted to grab this as it's exactly what I was hoping for amongst the myriad of BIOS tweaks.
Svet, you are pretty much a saint. I've never seen anyone so charitably contribute on an OEM forum with the exception of Toshiba's Jerry Lippey.
If MSI hasn't sent you a trophy, they definitely should, and I'll start the petition for it.
Cheers!
Al
Thanks for kind of word, nope i don't have any trophy from MSI and i'm not paid by MSI
Quote
I've been digging around the last couple days trying to get up to date and also solve a minor problem on my U100, where in XP Turbo mode would simply freeze the machine (no BSOD, et al). It works in Windows 7 though, so I figure dodging the problem is OK.
Do Ec reset: https://forum-en.msi.com/index.php?topic=112416.0
if need resintall OS, since ist works in W7 it should works in XP too.
I don't have any issues either with XP or W7

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

Problem With WIFI and Bluetooth

HI Im Vikram
Recently i upgraded to IOS 8.1 so problem started with WIFI and Bluetooth . When i was in IOS 7.1.2 everything was fine with my device. so what should i do now ?? Is there any possibility to downgrade to IOS 7.1.2 ??

Hi Rainxl,
Unfortunately the BIOS is unable to be resorted to back it up, as the issue persists. I suggest contacting our Technical Support Team for all the information required and to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Connection printer to time capsule with wifi ... Problem

Sorry i am french... so my english is verry bad
I have buy yesterday a new printer with wifi connection, my problem is the wifi software into the printer dont find the time capsule...
Can you find a solution?

The new 7.6.3 firmware and 6.2 utility is supposed to provide WPS which is probably what the printer is requesting to do connection.. but you can use WPS without the new firmware. WPS is available.. just tricky to get at.
http://support.apple.com/kb/HT3500
The manual setup method suggested in the above article is the best.. just plug the printer into the computer by usb and use the setup disk that came with the printer.. I have done a few of these and it works fine.
I do recommend before you start.. setup TC with SMB type names.. ie short, no spaces and pure alphanumeric.

Satellite M40 - How to reflash BIOS with the same version?

Hey guys been reading the forums trying to find a fix for my problem. After I reformatted hardrive with the original CD everytime you reboot computer the wifi will drop even though the switch is in "on" position and won't come on untill you manually switch off and back on again.
Last time I fixed it by updating BIOS to 1.70 (newest) this time I cant reflash BIOS as it's window based flash and it checks that I already have 1.70. I reinstalled newest drivers and software for everything. I also searche a lot for older BIOS files if anyone mind sending over older 1.60, 1.50, for this computer would be greatrly apriciated it's M40 (PSM40E) it's the model with Nvidia 6600 video card.
Or any idea how I can reflash 1.70 again?
Thanks Daniel

Hi!
Reflashing the BIOS with the same or older version is not possible. Therefore you must go to an authorized service provider.
The technicians can relfash it with the same or older version.
If you dont know where is the nearest ASP you should look on the Toshiba website. There you can search for it.
Bye

Satellite L350-277 - Update of new BIOS and Wifi driver

TEMPRO has given me 2 new drivers but neither has instructions.
BIOS installation used to be an operation involving copying the driver to a disc and then changing the boot-up order to start with that disc.
However I think the new BIOS drivers are installed with Windows running - as a normal program. Anyone know for sure ?
I assume the wifi driver is a normal install, with wifi switched on or off ?

Hi
Just one question;
Is a WLan driver update and BIOS update necessary?
I mean; do you have any problems with your notebook where such update would be required?
You should not update this if everything is OK. in most case the Tempro notifies you about drivers and tools which are uploaded to the driver page but this is not a recommendation for an update you know what I mean???
I follow always this tip; never change a running system.

Problmes with wifi turn off with disable greyish in window 8.1 pro 9600

Hi,
I updated window 8 to window 8.1 pro build 9600 version.
I am getting a problem with WIFI turn off disable grayish color which cannot be enabled.
WIFI adapter is installed and working properly.
Plz suggest what will be the fix of this issue.
Thanks.

Hi,
Did you mean the Adapter is greyed out and we cannot click to turn on it? Is there a wifi switch on your laptop? If so, please turn on it first.
Also please try the network troubleshooter to see if the issue can be fixed:
1) Right Click network icon in taskbar and select "open network and sharing center"
2) Highlight wifi connection then at top click "Diagnose this connection"
The troubleshooter will discover that the WiFi connection is turned off and offer a "Apply fix" option click that and windows will enable the wifi connection.
To make sure the driver for Network adapter is the right one, please go to manufacturer’s website to see if there is the one compatible with Windows 8.1.
If not, we can try to install the one applied to Windows 8 in compatible mode to see what’s going on.
Since such issue can be caused by driver bug, please also contact the manufacturer to see if they can provide more information about this issue.
http://social.technet.microsoft.com/Forums/windows/en-US/11d2cc27-cee8-41e1-865a-f5f7098e1d26/windows-8-wifi-off-problem?forum=w8itpronetworking
For further troubleshooting plan, please upload the event log here for further research.
Kate Li
TechNet Community Support

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

My ipod touch 4th gen battery only lasts for 3 hours with wifi and brightness fully down

My ipod touch 4th gen battery life if asful only lasts a maxium of 3 hours with wifi turned off and brightness fully down any suggestions?

You can try restoring the iPod. However, it could be that the battery is going bad.
Apple will exchange your iPod for a refurbished onewith a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the followingwill rplace it for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchace a replacement battery for about $10
iPod Touch Repair – iFixit

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

What I recommend you try doing first is to turn iMessage off then back on. If that doesn't work, make sure that your Apple ID and password are correct. If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
Hope this helps!

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Issues with WIFI-connection in the Spotify app

I have a very annoying problem with my Nokia 5800 XM and the Spotify-app. I updated the app to v. 0.4.3.9 yesterday and it required that I uninstalled the old version first, i.e deleting all my cached tracks. Now today when I'm going to resync (on WLAN, since it's about 500 tracks) it just won't connect. I choose the correct WLAN from the list, but the app continues being blue (not green) and then the list pops up again. I read another discussion about almost the same thing a moment ago, so I tried to go to the menu and check the WLAN connection from its menu. So I did that, and it says my WLAN has full signal strength (I'm right next to the router) but then it loses the connection and asks me again which network I want to use. I have not had any issues with WLAN in any other app, and I have synced tracks with Spotify on my WLAN before, so I have no idea where the problem lies. Maybe something with the update and my WLAN? I don't know...
About the attachments: The list that shows several times and then the WLAN list where I'm connected to my network and it has full strength. "Marsvinsfarmen" is my network.
I'm thankful for answer, I use Spotify every day!
Solved!
Go to Solution.
Attachments:
Scr000012.jpg ‏51 KB
Scr000013.jpg ‏54 KB
Scr000014.jpg ‏50 KB

Okay everyone! I struggled with this problem for a long time, and I was just about to send a complaint to Spotify when it worked for me! See, I did a little different than before; this is the list I was going to file:
"1. I open Spotify from the application menu.
2. I choose "Online" mode.
3. My phone asks me how I want to connect to the Internet.
4. I pick "Easy WiFi".
5. I choose my WiFi network from the list.
6. Application seems to be signing me in.
7. My phone asks me again how I want to connect to the Internet.
8. I repeat the procedure. Spotify can't connect with WiFi.
-I have tried to connect using other WiFi networks, didn't work.
-Before I updated last time I could connect without problem.
-I can connect using 3G.
-I can connect using WiFi in other applications than Spotify, for example Opera Mobile and the native browser.
-I have reinstalled the application without difference."
However, I did it a little different, which made it work: instead of choosing "Easy WiFi", I choose my network directly from the list: see attachment. I never thought of that I could do so and I can't remember I did that before the update either. I have now synced my tracks and the app seems to be a little buggy, I still hope for an update, though it now works at least. Sometimes it crashes.
Please, tell me about if this worked for you and if you have other, better solutions. This isn't good enough, I still seek a better way.
/L
Attachments:
Scr000020.jpg ‏53 KB

IPhone 6/iOS 8 email issues with wifi connection

Hi
I have just upgraded from an iPhone 4 (iOS 7) to an iPhone 6 (iOS 8) and am having an issue with my pop email account. I used my iPhone 4 backup to set up new iPhone, so all the settings were as they were in my old phone. I have two email accounts, one is an IMAP account and the other is a POP account (which is my main email), I have no problems connecting to the server and downloading emails when connected via 4G (its super fast), but when I am connected via wifi, the POP account takes ages to connect to the server and check for emails (stuck on checking for email). I can speed up the process by closing mail app completely and reopening, then it checks and downloads really quickly (IMAP account has no problems), but this is frankly a pain.
I have spent ages on the phone with Apple support, who have got me to delete my POP email account twice, reset network settings, reset the phone using on/off button and home button, all to no avail. They are intent on telling me it's my email service providers fault, but as I pointed out there is no issue on 4G and my old iPhone (using iOS 7) on wifi has no issues, so can't be email provider. I have also tried using Apple's wifi in store to rule out router issue and the problem happened there too.
Have now run out of suggestions and options. I'm not sure if it's the phone itself, either a hardware or software issue (Apple support think not). Someone told me that it could be the wifi on my phone blocking the connection to the server. I have an appointment booked at the genius brand they have suggested wiping the phone and setting up as a new phone to see if the problem occurs, but this seems a bit drastic and I would lose all messages etc. Any help would be appreciated.

I have solved the issue! I tried my pop account on other devices with iOS 8 and the same thing happened, so I deduced that the issue is a glitch in iOS 8 with wifi and pop accounts. I managed to get hold of the IMAP settings for my email provider and all seems to be well. Happy days!

REQUEST: U100 1.0G Bios with WIFI on startup

Similar Messages

Maybe you are looking for