Request UFEI Bios - R7950 - TF 3gd5/oc BE
S/N 602 v276 20sb1212032563
Dont seem to have the option to upload current bios though
Just one question, what benefits will this bring? Anyone think it will solve a no video on cold boot error?
Hi there,
Am getting the following Error
Old SSID 2761
New SSID 2761
Old PN 113-xxx-xxx
new PN 113-c3864000-x00
PN Mismatch Error 0fl01
Thanks
Similar Messages
-
[REQUEST UEFI GOP vBIOS] R7950 TF 3GD5/OC
Hi,please help me to get UEFI GOP bios
R7950 TF 3GD5/OC
S\N: 602-V276-020C1210038413
thx!There is no such available for this one,
you can ask msi tech about it here: >>How to contact MSI.<< -
Request UEFI / GOP bios for MSI R7950 TF 3GD5/OC BE
I need a Biosfile for my UEFI / GOP bios for MSI R7950 TF 3GD5/OC BE.
SN: 602-277-130B1308049407
Bios Revision:015.031.000.001
h***s://skydrive.live.com/redir?resid=72007DCEBD24DB0E!2251&authkey=!AI09801QvTZ1ALohere it is
-
[Request] UEFI / GOP R7950 Twin Frozr 3GD5
My card has 2 bios positions one with 300mhz/150 mhz idle clock, and the second one 500/150 mhz idle, and that seems to be the only difference between the 2.
I'm posting the lowest core one.
R7950 TF 3GD5/OC BE
s/n: 602-v276-18sb1211086305
www(dot)dropbox.com/s/z5llyh05tew5f1n/Tahitipos2.rom
ThanksUse the attached.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (1a0.rar) and put the included file (TV276MH.1A0) on that stick.
Rename TV276MH.1A0 to 1A0.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 1A0.rom) [ENTER] and let it flash the vbios. -
VBIOS request - 2x R7950 TF 3GD5/OC BE
Hello folks, I'm looking for the latest UEFI BIOS to help Windows 8.1 out a little... and maybe my motherboard will stop complaining.
GPU Model: R7950 TF 3GD5/OC BE
Serial Number Card 1: 602-V277-130B1308042869
Serial Number Card 2: 602-V277-130B1308042717
Current BIOS version: 015.031.000.001.001867 (113-C3861300-X03)
Current BIOS link... h t t p ://1drv.ms/1mVBjTD
Thanks in advance.Use the attached.
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (270.rar) and put the included file (TV277MH.270) on that stick.
Rename TV277MH.270 to 270.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 270.rom [ENTER] and let it flash the vbios. -
[REQUEST] UEFI / GOP Vbios for R7950 TF 3GD5/OC BE
Request for UEFI VBIOS.
Model: R7950 TF 3GD5/OC BE
S/N: 602-V277-130B1308056859
Old VBIOS: h t t p s://drive.google.com/file/d/0BwBzXYQ8iqc3aXBJY3JGVGR4YUE/edit?usp=sharing
Thanks!Use the attached.
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (270.rar) and put the included file (TV277MH.270) on that stick.
Rename TV277MH.270 to 270.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 270.rom [ENTER] and let it flash the vbios. -
R7950 TF 3GD5/OC support GOP?
Hello,
I have 2 x R7950 TF 3GD5/OC in CrossFire along with a Z77A-GD65 (Bios 10.8) working with Win8 pro x64, and i´m willing to know if there are a updated version of Vbios/firmware to enable GOP ??
S/N: 602-v277-05sb1205073706
S/N: 602-v277-05sb1205073710
Best regards.
Frost.here it is.
flash it by booting from USB key, then execute:
atiflash -f -p 0 xxxx.BIN [ENTER]
where xxxx.BIN will be your vbios file -
MSI R7950 TF 3GD5/OC BE DXGI_ERROR_DEVICE_REMOVED
Hi, sorry I speak very low english,
I have a brand new system:
Graphics: MSI R7950 TF 3GD5/OC BE (Serial number is: 602-V276-18SB1212032385
Board: Asus Sabertooth FX990 rev 2.0
SSD: Corsair 240GB GTX
RAM: 2x 4 GB 1866Mhz Corsair Vengeance
PSU: Corsair GS800
CPU AMD 8350
Cooler: Corsair H100i
Windows 8 PRO 64 bits
I have problems playing crysis 3
Appear the error playing, "DXGI_ERROR_DEVICE_REMOVED" all the time 30 secs and crash,
I have tested the stable drivers of ATI, and the lastest beta and is the same.
No overclock, all stock, defaults on msi afeterburner and ati catalist...
Some people say to undervolt the graphics card the problem are oc graphics cards... Anyone know the solution to solve the error: DXGI_ERROR_DEVICE_REMOVED
Printscreen:
link: htt*********p://img832.imageshack.us/img832/8615/problemhk.jpg
Remove the *******I put some prints of the game,
h*****ttp://img163.imageshack.us/img163/2152/print1a.jpg
h*****ttp://img833.imageshack.us/img833/5125/print2b.jpg
h*****ttp://img854.imageshack.us/img854/8485/print3q.jpg
remove *****
Is in french sorry
I have all extreme, max settings.
I change for test to high settings, and is the same, the graphics is good but the game crash.
I need some help because the game dont
This crash is with clock to 880 and all stock, just put on ati catalist best performance view printscreen:
This crash is with clock to 880 and all stock, just put on ati catalist best performance view printscreen:
h********ttp://img824.imageshack.us/img824/777/print4d.jpg
MSI after burner:
h************ttp://img853.imageshack.us/img853/1109/print5h.jpg
I use the MSI lastest drivers. -
MSI R7950 TF 3GD5/OC BE too high stock voltage
Hi, this is my first post so please be gentle with me
I just bought a MSI R7950 TF 3GD5/OC BE video card which is 960mhz stock speed, but I found out that this card has a too high stock voltage which displays 1.18v in GPUZ and 1.25v in afterburner. I don't think the card can last long with such a high voltage so I want to lower it.
I try to adjust the voltage in afterburner, it seems it changes in the software (the slide did change). But GPUZ still displays the same voltage.
Can anyone help me with this?
Thanks.Quote from: tails on 07-April-13, 22:29:57
Thanks for the reply.
I've found the solution for that. I downloaded the version 3.00beta9 of afterburner and now it can change the vcore.
I changed the vcore from 1.25 to 1.05v. Now the card is running at 1050mhz, 57degree with 60% fan speed, cool and quiet. Before was 75 degree and 80% fan speed.
I'm satisfied now.
Ive got Afterburner 2.31, its allows undervolting as well. But problem is that in boost mode new values are ignored and back to default. So in that case cant see any sense in doing that. Is that changed in ver 3?
D. -
Request for BIOS that supports 1600MHz RAM
Hello, I confirm, that with old bios version my L520 supports 1600MHz frequency of RAM.
Why is the frequency downdraded in new bioses?
Can we, users of ThinkPads, request new bios version that has all the fixes and still supports 1600MHz ? Becouse since bios downgrade sometimes when my notebook goes to standby it ends up with blue screen.
Solved!
Go to Solution.I think there is a misunderstanding here. With intel core cpus, the memory controller is within the cpu itself and not in the chipset. So it's really a question of having a cpu that supports 1600Mhz ram rather than a bios which can support the memory. Since there are no L520s officially carrying i7 cpus (the only ones supporting 1600Mhz ram, and only some of them), installing 1600 Mhz ram is tottaly useless. Older bioses may report 1600Mhz for the ram but do not really take advantage of the higher frequency, since it is the cpu that can or cannot control it. Sandy Bridge i3 and i5 cpus can only use 1333Mhz memory so the laptop will in all cases downclock automatically the ram to 1333Mhz, using maybe lower latencies as well (which could be the only small advantage of using higher frequency ram).
You can try to upgrade your L520 with an i7, but it will void the warranty. Also the 4core i7s which can use faster memory need more current to run and warm up more, so you will have to be very careful (use a 90W power supply, check for temps often). The cpu itself is not cheap either at around $250 used, so if you really need something faster, maybe you should go for another laptop alltogether.
I hope this helps and clarifies the situation.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
Request unlock BIOS MS-1763 or GT70 2OC with Version E1763IMT.509
Hello,
I'd like to donate for the following request: unlock BIOS MS-1763/GT70 2OC, having Bios Version E1763IMT.509
My goal is to change my grafics card from actual GTX 770M to GTX 970M.
I'm not that pro to know if the GTX 970M config will be done with the following steps ?? - plz help:
1.) change/install card, or after point 5.) ??
2.) Flah BIOS - requesting help here
3.) Disable onboard HD audio and graphic card
4.) Disable IDT GPU in BIOS advanced settings ?? will it be possible with flashed bios
5.) Change display model from SG to PDG via BIOS
6.) download from laptopvideo2go.com .... driver v 353.00 and mod INF.file for GTX 970M Wind 8.1 (64). - install.
My other Specs:
CPU i7 4700MQ
Nvidia GTX 770M -- change to GTX 970M 6GB
Wind 8.1 (64)unlocking bios has no connection with GPU support.
unlocking bios will not give you addiction GPU support
Quote
MS-1763/GT70 2OC, having Bios Version E1763IMT.509
My goal is to change my grafics card from actual GTX 770M to GTX 970M.
for this model it should works as is, without special things to be done.
for 1763 model 980M works fine:
http://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread.765058/
Quote
1.) change/install card, or after point 5.) ??
2.) Flah BIOS - requesting help here
3.) Disable onboard HD audio and graphic card
4.) Disable IDT GPU in BIOS advanced settings ?? will it be possible with flashed bios
5.) Change display model from SG to PDG via BIOS
6.) download from laptopvideo2go.com .... driver v 353.00 and mod INF.file for GTX 970M Wind 8.1 (64). - install.
just install the new card and see if its works, you may need to install a modded inf [maybe not]
about bios update it should be not required,
but if by chance is need we can discuss this eventually later.
else bios can be also unlocked, but this has no connection with GPU support -
[REQUEST] MSI R7950 TF 3GD5/OC BE UEFI GOP BIOS
Hello.
My Graphics Cards SN:602-V277-130B1308079087
Link vbios: ht tps:// drive.google .com/file/d/0ByN9DUowTcZ9aHBZdWlwbHVJU00/ view?usp=sharing
I would like the latest uefi gop bios for my card
Thank you a lot!i thought that you already using UEFI/GOP vbios, but looking for latest UEFI/GOP vbios..
looks like you don't use UEFI/GOP, but legacy
im attaching UEFI/GOP vbios below for your card -
Request R7950 TF 3GD5/OC BE UEFI GOP BIOS
please help me to get UEFI GOP bios
S/N:602-v277-130B1308078712
Bios link h t t p s://dl.dropboxusercontent.com/u/8160673/Tahiti.rom
thx!Hi Svet, I want to know is that different serial number but same model, it can flash same ROM or NOT?
-
Request R7950 TF 3GD5/OC UEFI GOP BIOS
please help me to get the UEFI GOP BIOS
SN :602-v276-020c1210039302Use the attached.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (TV276MH_123.rar) and put the included file (TV276MH.123) on that stick.
Rename TV276MH.123 to 123.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 123.rom [ENTER] and let it flash the vbios. -
GOP / UEFI Request for MSI R7950 TWIN FROZR 3GD5/OC
I would like to request a GOP / UEFI bios update for the following cards:
Model: R7950 TWIN FROZR 3GD5/OC
S/N: 602-V277-17SB1305095142
and
Model: R7950 TWIN FROZR 3GD5/OC
S/N: 602-V277-17SB1305094686
Thanks!Quote from: Svet on 29-August-13, 22:14:40
can you save and upload its vbios and give link to it?
Here is the link the BIOS for both of the cards:
GObo" class="bbc_link" target="_blank">https://mega.co.nz/#!gAJhHKLK!SCavwEvixZVjCwQ9OgnbvRejbFUV6MADGezSUlF GObo
Please copy and paste the link, otherwise you won't be able to download the file if you directly click on the link (I think there is some forum bug when displaying a url)
Maybe you are looking for
-
Trying to install windows 7 64 bit on a mac mini
I'm trying to install windows 7 64 bit on a mac mini, via boot camp. Install hangs at about 10% while files are being loaded from windows disc. I'm using an LG USB 2.0 Super-Multi DVD Burner. What's the fix for this.
-
cannot download adobe flash player on firefox it says i need to disable firefox first? If i have to disable how do i do it.
-
Queries related to Bi Beans using Oracle9i JDeveloper
Queries related to Bi Beans using Oracle9i JDeveloper [5.0.581] 1. Is Asymmetric Report feature is available in Oracle JDeveloper(BIBEANS)? 2. Is Write Back feature is available in Oracle9i JDeveloper using BiBeans? 3. Is it possible to use HotSpots
-
Icon in front of the JList items?
Hola a todos, I am rendering a JList to a JTextArea and I want to add a icon in front of each of the items. First it can be the same icon later each one should become its own one. I am using this little piece of code to render the JList: JList lista_
-
How to create a buffer by passing a just polygonpopints as a parameter
hi , this query about oracle spatial... please tell me how to create a buffer around a single polygon data.. by passing single polygon co-ordinates as a parameter.. ex: for a point the following works.. select * from TEMIS where SDO_INSIDE(TEMIS.GEOM