Request unlock bios/vbios Msi GT 70 2O-59us
Was hoping for help unlocking msi gt70-2O any info would be greatly appreciated thanks
all duplicated posts removed, please use your own topic
this topic is also duplicated, its now locked.
one topic is enough, keep posting in your original topic:
https://forum-en.msi.com/index.php?topic=180748.0
Similar Messages
-
Request unlocked bios for msi gs60 2pe-212NL
i would like to request a unlocked bios for my msi notebook
My donate prescription is 38N15695AM1636428
Mainboard: MS-16H2
PCB Version: REV:0.B
BIOS Version: E16H2IMS.10B
BIOS Date: 8/16/2014
EC Version: 16H2EMS1 ver5.06
EC build: 05/22/2014
Thank you in advance SvetHello,
will work over and send back to you when its done,
but will be with some delay, after approx. 24 hours will be back to you
EDIT: It's now done, check PM -
Request Unlocked BIOS for MSI GT70 0ND
Please HELP! I'm in need of the unlocked BIOS for my MSI GT70 0ND Laptop. Mostly for the virtualization.
My current BIOS - E1762IMS.30M & EC Version - 1762EMS1 Ver 4.05.
Could you PLEASE help me? Also, how much do I need to donate to make this happen?
Thanks in advance! Russell.Quote from: MSINoVirtual on 06-August-12, 12:22:24
Hate to bump up a new thread, but I am also in need of virtualization. I'll happily send a donation also. I tried MSI's bios update, which won't run on 32 bit systems(generates an error). It also won't run on 64 bit systems (only runs on 32 bit systems). I can't believe that MSI put out a laptop and disabled virtualization. I wish that they would have made that clear before I purchased a laptop with 32 GB's of RAM.
You have to use proper way to flash the BIOS like by following this msi guide:
http://www.msi.com/html/pdf/How_to_make_a_bootable_flash_disk_and_to_flash_BIOS_f.pdf
or even more simplest with >>Use the MSI HQ Forum USB flasher<<
Quote from: MSINoVirtual on 06-August-12, 12:25:18
Okay, I just sent a donation also. Hope this works on my MSI GT70. I'm in desperate need of unlocking the BIOS.
Check PM for unlocked BIOS -
Request: Unlock BIOS for MSI GX60 3BE
Dear Svet
I would like to please for BIOS Unlock for my MSI GX60 3BE.
Marketing Name: GX60 3BE
Model Name: MS-16FK
Firmware Information
- BIOS Version: E16FKAMS.90L
- BIOS Build: 01/09/2014 16:15:25
- EC Version: 16FKEMS4 Ver5.06
- EC Build: 03/06/2014
Donation: 4WT28573NW083425V and 1287-7081-0716-4410 (from e-mail)
What will be an information under BIOS in "Firmware Information" section, when I update to this new Unlocked BIOS?
EDIT
My MSI GX60 3BE comes without any OS like Windows 7 and Windows 8, but I'm using Windows 7 64. I have updated my BIOS after downloading it from MSI Download Section (click on BIOS tab, then on Win7 64 tab and download THIS BIOS file). I have used this manual to update BIOS.
Best regards.
Sincerelyreceived it, will work over it and sent back to you when its done after 4-5 hours
Quote
What will be an information under BIOS in "Firmware Information" section, when I update to this new Unlocked BIOS?
it will be the same -
Requesting unlocked BIOS for MSI GX60 3CC
Hello,
I bought an MSI GX60 for college, and I like it, but I feel the BIOS is limited and doesn't have enough options for my liking
Model: MSI GX60-3CC
BIOS Version: E16FKAMS.D0K
EC Version: 16FKEMS3 Ver 5.04
Thanks in advance!Hi Svet, sent you a donation (number: 9LW34927G2405184F)
I hope you can create on unlocked BIOS for me!
Thank you,
Andrew Montgomery-Fox -
Request unlock BIOS MS-1763 or GT70 2OC with Version E1763IMT.509
Hello,
I'd like to donate for the following request: unlock BIOS MS-1763/GT70 2OC, having Bios Version E1763IMT.509
My goal is to change my grafics card from actual GTX 770M to GTX 970M.
I'm not that pro to know if the GTX 970M config will be done with the following steps ?? - plz help:
1.) change/install card, or after point 5.) ??
2.) Flah BIOS - requesting help here
3.) Disable onboard HD audio and graphic card
4.) Disable IDT GPU in BIOS advanced settings ?? will it be possible with flashed bios
5.) Change display model from SG to PDG via BIOS
6.) download from laptopvideo2go.com .... driver v 353.00 and mod INF.file for GTX 970M Wind 8.1 (64). - install.
My other Specs:
CPU i7 4700MQ
Nvidia GTX 770M -- change to GTX 970M 6GB
Wind 8.1 (64)unlocking bios has no connection with GPU support.
unlocking bios will not give you addiction GPU support
Quote
MS-1763/GT70 2OC, having Bios Version E1763IMT.509
My goal is to change my grafics card from actual GTX 770M to GTX 970M.
for this model it should works as is, without special things to be done.
for 1763 model 980M works fine:
http://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread.765058/
Quote
1.) change/install card, or after point 5.) ??
2.) Flah BIOS - requesting help here
3.) Disable onboard HD audio and graphic card
4.) Disable IDT GPU in BIOS advanced settings ?? will it be possible with flashed bios
5.) Change display model from SG to PDG via BIOS
6.) download from laptopvideo2go.com .... driver v 353.00 and mod INF.file for GTX 970M Wind 8.1 (64). - install.
just install the new card and see if its works, you may need to install a modded inf [maybe not]
about bios update it should be not required,
but if by chance is need we can discuss this eventually later.
else bios can be also unlocked, but this has no connection with GPU support -
Request: Custom/Unlocked BIOS for MSI GT70
Hi there,
I have sent a donation and I was hoping to get a unlocked BIOS for my GT70.
Also if possible can I include the "FN" "Windows" key swap?
https://forum-en.msi.com/index.php?topic=159714.0
What else do people request for the custom BIOS?
Current BIOS is E1762I MS30J
Thank you,
JamesQuote
have sent a donation and I was hoping to get a unlocked BIOS for my GT70.
ok
Quote
Also if possible can I include the "FN" "Windows" key swap?
https://forum-en.msi.com/index.php?topic=159714.0
Yes.
Will take some time, and will send you when its done.
Quote
What else do people request for the custom BIOS?
Hard to say, custom logo, other specified stuffs and such -
[b]Request[/b] unlocked bios for MSI GT70 0nd
Can any one send me MSI GT70 0nd unlocked bios please and thanks
oki, unlock is possible
i can start work on it once donation is received:
https://forum-en.msi.com/index.php?topic=134259.0
and to send it back to you when its done 3-4 hours later assume if im online at that time -
Request: Latest Unlocked Bios for MSI GT70 MS-1762 | split
Hi Svet,
My laptop is iBuyPower valkyrie CZ-17 with MS-1762 motherboard (I think). Tech support said that the motherboard supports up to 1866MHz and I recently purchased Corsair Vengance 18GB (2x8) 1866MHz DDR3 amazon.com/gp/product/B009PV1ELO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Well, when I install it (both of them at the same time and individually as well with the 2 ram slots on the Mobo - also checked if it was seated properly) and the laptop turned on but the screen stayed black. After a bit of searching, I found out that the BIOS can be unlocked to allow up support up to 1866MHz. So my question is: is it possible for you to create a custom BIOS for my laptop? I will donate as requested.
Also, as for whether the RAM is actually compatible with the Mobo, I have no idea. Amazon description said that the RAm should be compatible with most DDR3 ram slot. I'm desperate now since I don't want to go through the hassle of returning the RAM since I like them so much and they are among the best ram with 1866MHz. Please advise.
Thankswhat is your current BIOS version?
Quote
After a bit of searching, I found out that the BIOS can be unlocked to allow up support up to 1866MHz.
Yes eventually, but i doubt that this will solve your issue
the ram should works with lower freq. too
unlocked bios can give you a options to customize memory timings and freq.
but this doesn't mean that can help to solve your non boot issue -
ID: 27K920100T2026530
I have the MS-1763(-MFB1) barebone, and I would very much like a
"care package" of yours. My current setup is briefly listed in the BIOS
screen-shot, and I do not mind any updated versions of the firmwares
(BETA or ALPHA). If you need more details from my system, feel free to
list appropriate GNU-Linux/DOS tools and I'll give you their outputs.
Anyway, without further adiue, here's the list of what I have made
(if you got anything extra in mind feel free to mention that too
over PM ;3 )
- Fully unlocked BIOS (especially important that VT-d can be enabled*)
- Updated EC with optimized fan values
- Below 45C* the fan should be at minimum or off
- The fan should be at maximum when hitting 75*C
- Your vBIOS/EC tools. I got the GTX780M w/ 4GB
- Newest ME update if there is one.
I hope I'm not being to vague or confusing by this. If so I feel free to
help adjust my requests by PM. I hope the amount donated is sufficient
for you.
Thank you on beforehand; it's appreciated the work you do =)
*https://gist.github.com/anonymous/9106251 -- dmesg reports the BIOS as
broken, which possible means either there's a bug with IOMMU
implimentation or simply VT-d being disabled.I newly installed Windows 7 onto my computer which till now I've used a GNU/Linux server, and I've come on a roadblock, that is the internal sound was disabled (and perhaps other things I as a end-user am not aware of), which works with the stock BIOS. Because of the lack of documentation I can't be sure to find what option that enables the sound device, and such I have a new request: the factory defaults of the old bios to be patched over to the new one or something in that direction so that what should be enabled by default, is.
Like last time, if there's any newer revisions of the firmwares (BIOS,EC,ME) I would not mind getting that patched up as well (same customization applies). And for your support, there might be another donation waiting for you in the end.
Thanks again Svet for your work. Hope to hear from you soon. -
Request: GOP/UEFI vBIOS - MSI N670GTX-PE2GD5/OC
Good day!
I'd like to request GOP/UEFI vBIOS as stated. Details are below.
S/N: 602-V284-030B1208192127
Current vBIOS: htt**://mega.co.nz/#!vY5FSLRA!itk06jjrJOxtKb-7rrSqMblJ3dUfr-8uhtSoN0kGru0
Q1: I'm running an SLI setup (2 different brands). Do i need to flash both or is it enough if i flash the one in first slot for UEFI to work?
Q2: Even if i flash just this card (my primary concern is updating this card with latest bios, since there are some issues with it), i guess it doesn't prevent SLI from running properly ?
Thanks !Can't really identify your current vbios. Did you read the S/N from the card or box?
Quote
Q1: I'm running an SLI setup (2 different brands). Do i need to flash both or is it enough if i flash the one in first slot for UEFI to work?
Both need to use a UEFI vbios else it doesn't work and of course you can't use the vbios of the MSI card on the other brand's card. So you'll ask the other brand for an update too.
Quote
Q2: Even if i flash just this card (my primary concern is updating this card with latest bios, since there are some issues with it), i guess it doesn't prevent SLI from running properly ?
SLI will work fine as before. You just can't enable UEFI mode using just one card with a UEFI/GOP vbios. -
Unlocked bios for msi ge60 2pc
Hi, I need an fully unlocked bios for my MSI ge60 2pc apache. options like choosing a discrete graphics card and disabling Vtx could be nice
Laptop spec like below
GE60 2PC
MS-16GF
BIOS Information:
BIOS Version: E16GFIMS.61B
BIOS Build 06/02/2014
EC Version: 16GFEMS1 Ver5.0B
EC Build 12/11/2014
CPU Information: Intel (R) Core (TM) i7-4710HQ CPU @ 2.50GHZ
EMT64 Supported
Processor Speed 2500Mhz
Processor Stepping 306c3
Microcode Revision 17
Processor Cores 4
IGFX VBIOS Version 2179
Memory 8192 MB
ME FW Version: 9.0.30.1482
GPU Nvidia GTX 850M
msi.com/product/nb/GE60-2PC-Apache.html#hero-overview
Donation number: 0UE582066U8248700
Best regards,
TuanQuote
options like choosing a discrete graphics card and disabling Vtx could be nice
i will unlock all options, what options will be there and how they will works don't depend of me
about discrete graphics, you can only disable that one
will work over it and send back to you when its done after 4-5 hours
until wait flash your bios to the latest version E16GFIMS.628:
http://www.msi.com/support/nb/GE60-2PC-Apache.html#down-bios
after that check PM for query
EDIT: It's now done, check PM -
Request new BIOS for MSI R9 270 GAMING 2GB
Hi there, I use W7SP1 with a Gigabyte GA-H87-HD3 mobo and the 13.12 drivers(14.4 suffer from very high OpenCL to Direct3D interop lag unfortunately, which is a showstopper with madVR) and I just bought this board with the exact same BIOS version number as on this link: techpowerup (.com)/vgabios/149707/msi-r9270-2048-131106.html
It's fairly silent under load and I'm happy with that, but when idle the fans seem hardlocked to 1040 rpm
Whatever fan percentage higher than 18% does increase the fan rpm speed, but anything lower still gives 1040 rpm.......what is the point to cool the GPU down to 28°C when its TJmax is 95°C? I would like to drop the fans speed when idle to maybe 700/800rpm and get the GPU to reach 40°C or so?
I run a SSD with a 350rpm oversized CPU fan, a passive PSU and several oversized case fans that also run very slowly, those 1040rpm are killing me....I used to own a VTX3D Vchamp HD7850 that allowed me to make my own custom fan speed curve in Afterburner: dead-silent when idle and slowly ramped up under load, perfect
Of course its cooler was a joke compared to your TF4 but you can see that Asus are now releasing graphic cards that are semi-passive with their fans shutting off until the GPU reaches 65°C, it makes no sense to me to use the TF4 at 1040 rpm when idle(and even more so on the 70W TDP GTX750Ti).
Long story short, I would really appreciate an unlocked BIOS please so I could build my own fan speed curve in Afterburner as I used to. I do plan on buying the future Maxwell's(a twice faster 750Ti would be awesome), I dearly hope that you will reevaluate your TF4 fan speed curves because otherwise I would more than likely buy a semi-passive Asus next time. Talk about wasted potential
I guess you hardlocked it so dumb ppl wouldn't set the fans to a fixed very low speed and toast the board, but posting an unlocked BIOS on your forum that's aimed at power users is just showing that you care. I know EVGA did post this kind of BIOS updates recently and you polished the TF4 cooler to such extents that it's truly a crying shame to be stuck at 1040 rpm and 28°C when idle
There is no question that TF4 is extremely effective under load with a 150W TDP GPU, but you can see that the 270X Powercolor board is quieter when idle in this comparison: tomshardware (.com)/reviews/radeon-r9-270-benchmark-review,3769-5.html
Hope you can help, I will gladly spread the word on HTPC forums because this board is close to perfection when using madVR.
Thank you very much in advanceOK thanks for the reply, but the 18% cap seems BIOS based...I have a hard time believing that they can't run any lower than 1040 rpm
Are you a mod? Working for MSI? This looks like a wild guess more than an official reply if you don't mind me saying.
For the record, that VTX3D board I mentioned in my previous PM was able to go down to 1%.
I would fix it myself but there are no BIOS editors for the R9 serie apparently....MSI simply capped the lowest PWM value: tpucdn dot com/rbe/RBE_Fan.png
Whatever way their speed's being throttled(PWM or voltage), they must be able to go slower than that. I could provide you links but EVGA did make clear that they capped the lowest speed of the fans on some of their boards so dumb users wouldn't fry them but they were entirely able to release unlocked BIOS binaries.
At this point I could either return it or unplug its fans and slap a 600rpm 140mm fan onto the board using zip ties.......it's just amazing that MSI managed to ultimately fail on such a detail. All the work put into the TF4 cooler goes down the drain
flobelix seems able to help, I hope he'll chime in: forum-en.msi dot com/index.php?topic=180521
Quote
Fan controller actually can control the fans, and the GPU gets less hot -
Request Unlocked Bios for GE60 20E
Hello, it's possible ?
Mainboard: MS-16GC
PCB Version: REV:0.B
BIOS Version: E16GCIMS.110
BIOS Date: 08-02-2013
EC-FW Version:
Link BIOS: download.msi.com/bos_exe/E16GCIMS.110.zip
THX.Quote from: sscssc on 28-July-14, 00:29:32
Hello, unlock 110 version is not possible ?
after 5 - 6 days of test with default setting, my computer less stable with the 11c version.
Quote from: sscssc on 28-July-14, 00:29:32
Hello, unlock 110 version is not possible ?
Yes eventually
Quote
after 5 - 6 days of test with default setting, my computer less stable with the 11c version.
does this mean it was also unstable with 110?
what kind of instability you have? -
Request unlocked BIOS for MS-1762 barabone
Hi Svet,
I have the same problem with "unzhin", required unlock BIOS for my Notebook to enable virtualization (VT-d).
My notebook Specification:
MSI MS-1762 with GTX680M -GT70 Barebone
Bios version: E1762IG6.30J
Build date: 06/08/2012
EC version: 1762EG6 ver 4.00
EC build: 07/04/2012
Is it possible to unlock?
I am waiting good news.Hi Svet,
Thank you for your help .
I have done performed fully unlocked of my Bios.
About Intel virtualization manually enabled but, still the result the same in my previous screenshot.
May be my laptop not support Vt-d, and support only Vt-x
======================
This is little illustrate was performed:
About Vt-x, I've installed VMwave workstation 9 (required Vt-x to enable running game) and it's running OK, but for online game is very lag.
And for Vt-d, I've installed Parallel workstation 6 (required vt-d to enable running game) in this case I can't running my game (which Directx required) and got warning as per my previous screenshot.
May be you have any idea .
thanks.
Maybe you are looking for
-
Hello, first time posting a question! I have spent a good while trying to find an already posted answer to this, and looking on the wider web, hope i have not just missed it. I am using XP Pro SP3, LV 8.6. I am not very familiar with Windows command
-
I need to modify the header of a tableview and I've tried this: .table-view { -fx-background-color: rgb(70,70,70); -fx-text-fill: white; -fx-border-style: solid; -fx-border-color: transparent; /* -fx-border-insets: 0 1 1 0, 0 0 0 0
-
I have a Nokia 5800 XpressMusic with Ovi maps installed in it. It used to work well with street by street voice navigation until recently I checked for an update and downloaded the latest one. Now that I'm trying to use car navigation again it says,
-
How can I find/fix bad USB Port on MBP 2012 ivy 15' WITH SUPERDRIVE
I have a 2012 15' ivy bridge macbook pro with the super drive. I am a DJ and I get terrible static and other audio problems when the mixer/soundcard is connected to one of the USB ports, how can I determine which one it is and how can I fix it?
-
hey I would really appreciate it if you could help? I just cant believe all my apps just went poof after I synced my itouch on itunes. They are no where to be found? what do I do? Im really freaked out because i dont want to have to buy them all agai