Request without Monitor Log: APO Request or Terminated Request Generation

Hi,
While loading data to ODS from the sources system there is new error request appearing in the ODS with following description:
Request without Monitor Log: APO Request or Terminated Request Generation
Unable to see the error details as this request is not appearing in the monitor, unable to delete the request from the ODS and the error message is below.
Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed RSMPC 060
Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed RSMPC 060
Any thoughts on above issue are helpful.
Thanks
Kumar

My thoughts on this...
This problem might be caused by a program error.
DataStore objects allow you to check or generate master data ID (SID) values during the activation. If you choose to do this, the parallel processes may terminate.
<b>The following prerequisites must apply:-</b>
You activate the DataStore object data in parallel (see transaction RSODSO_SETTINGS).
During the activation, SID values are checked or generated (option "Generation of SID Values" is set).
The generated programs of the InfoObjects of the DataStore objects are not current at the start of the activation (in particular, after metadata changes).
Note 978772 - P10: Parallel SID generation terminates with deadlock
Hope it Helps
Chetan
@CP..

Similar Messages

Managing Request without Monitor Log: APO Request or Terminated Request Gen

Hello Everyone,
Need some help of managing a system created DTP named Request without Monitor Log: APO Request or Terminated Request Generation. This is like a staging DTP provided by SAP to support data loads to DSO or Cube and, it's good if the process goes smoothly.
However when we encountered unnecessary error such as tables space or memory problem, this particular job will get stuck and there's no way to move forward or backwards from this point. There were some answers to delete the request from RSICCONT, but I don't see the direct relations here, or maybe I'm wrong.
My only question - Have anyone any idea on how to work around this.
The last thing I've in hand is to delete the whole thing (requests) and re-do from start (extraction). Not a pleasant thing as this DSO feeds to 2 Cube & 1 DSO and then to another Cube.
Thanking everyone in advance.
Regards,
Azmadi

Hi,
sad to knw you had to delete the whole data and reload. I faced the same issue today and here is what i did,
when you go to the reconstruction tab, you will find 2 ticks present
1st one that tells if request is available in data target and
2nd which gives the transfer structure status.
Now, if the first check is crossed it could mean 2 things....data no longer exists in data target or data was not updated to data target these are 2 different things.
So, in your case it wud have sed data was not updated to the target.
Solution, just reconstruct that request and then in the request tab mark it red and delete again since you dont need it.... then the activation through process chain will not fail.

Requests without Monitor Log: APO Request or Terminated Request Generation

Hello all,
Can you please help me in the following issue:
I had in an ODS, a full request of type:
Requests without Monitor Log: APO Request or Terminated Request Generation.
I deleted the request from table: RSICCONT in debugging mode. The request was on green.
Now I have problems on activating the next requests in automatically. Manually it is working.
Request REQU_6DFXRA2VWJL3KYU44JPCWKXL2 no longer exists in DSO SVO_PPAB; system is inconsistent
Activation of M records from DataStore object SVO_PPAB terminated
Please help
Thank you
Ramona

Hi,
Refer the below links,
Re: Managing Request without Monitor Log: APO Request or Terminated Request Gen
http://ar.delhigovt.nic.in/ar1/Mission%20Conv%20RFP%20-%20Vol%20I-%20V4.0.pdf
http://help.sap.com/bp_bblibrary/600/documentation/R61_BPP_EN_DE.doc
Hope it helps you,
Regards,
Ravindra.

Request without Monitor Log:

HI Frds,
When i am deleteing a req. from ODS, i am not able delete the Req. I Req. status is in Red and tech. status also in Red. Its showing DTP/Infopackage as "Request without Monitor Log: APO Request or Terminated Request Generation" and not able to see the Moniter(RSMO).
Kindly can one give me some solution to delete these type req. ?
Thanks
Pari

Hi,
Apply the recommendation of the above note:
1138410-->execute the report RSSM_ZOMBIE_REQUEST_DELETE before checking if you do not have entries in the table RSSELDONE or the table RSMONMESS but which may be displayed in the administration of a
data target with the descriptive text "Request without monitor log: APO request or terminated request creation".
I hope it helps.
Best regards,
Fran.

DBIF_DSQL2_DEFAULT_CR_ERROR": APO Interface without monitor log

Hi
V3.x
'Manage' in ODS - IP displays following message: " Request loaded using the APO interface without monitor log". The request is red in ODS and other requests after this request do not activate. Zero records were loaded from flat file.
The request is green in Monitor.
SM37 displays the following message: "ABAP/4 processor: DBIF_DSQL2_DEFAULT_CR_ERROR"
What do I do to rectify this?
Thanks
Cj

Hi
please ignore my previous statement. I've noticed that the IP in the monitor is already green but that te following message is displayed: "Request REQU_49UKKF2TZEX4Z7WRU6BW28IM6 in ODS ZABAND must have QM status green before it ......"
Now I sit with inactive requests before and after this request that is red.
What do I do to rectify this please?
Cj

Processing for request without data

Hi Experts,
I need to save additional information in my custom table for each request loaded into my infoprovider (cubes und dso).
I thought I can make it with some ABAP in the start routine. It works fine, but not for requests without data. If there is a request without data, start routine is not executed at. all. Do you know a pleace where I can input my processing for request without data records.
thanks
Wojciech

Hi,
I have to save information about the open posting period in R/3 when the request is loaded. I dont want to have this information in the data, becouse I want to have the possibility to delete requests belonging to an posting period.
I don't think, that this information is needed to understand my problem.
Greetings
Wojciech

Deleting a request in ODS that has no request number and monitor log

Hai All,
I have a request that failed. It oesn't even have a request id and is not getting deleted. Even if I delete it, the trash can symbol appears onits side and then disappears but the request still satys. I changed the status to red and deleted. Still its not getting deleted. There is no log in monitor also. I have a lot of data in the ODS and cannot afford to delete all data and load. Is there any table in SAP where I cn go in and delete it or is there any other way around?

Hello BI,
Please check the job logs in SM37 and see what job log says for deleting ODS request at the end though the job finished successfully. See if the job is still running in SM51 at the backend on server. If so please stop that job. I doubt that the request is still running either in R3 or BW in the backend. That could be one reason why it sometimes doesnt allow the request to be deleted.
Hope this helps,
Bye,
Naga.
Message was edited by: Naga Timmaraju

Job in Source system terminated - Request is set to red

Hi
I ran a process chain on the weekend which loaded several info packages into a cube. They all ran successfully except for one.
The error message said "Job in source system terminated - Request is set to red".
I've looked on Monitor and no records were extracted.
How can I find out more information as to why this failed ?
Sandra
thanks in advance

Hi sandra,
Suppose if the job in the source system is terminated then no extraction is possible.In order to see the job in the source system->in the process monitor tab->go to environment menu-->job overview>in the source system.so by following the above steps u can see the job in active r cancelled like that.by clicking on the job log u can see all the steps involved in that job.based on that u can take action.
what my suggestion to this issue is force the qmstatus to red and delete that incorrect request and perform again repeat.it will goes through successfully unless it is not a functional error.
assign points if it is useful...
regards,
sri

PPP LCP Send Termination Request [User request]. C...

In a nutshell, my Infinity has been a nightmare since initial installation in August 2013, characterised by dropouts and drops in speed caused by DLM activating. The problem has got worse since upgrading to Infinity 2 and the HH5 (from HH3). checking the event log, the drop outs are ALWAYS preceeded by the message : PPP LCP Send Termination Request [User request]
I have had four engineer visits, none of whom have detected any line faults.
I am paying for a premium service that drops out without any good reason anyone has been able to explain to me so far.
I have tried using the HH5 as router only with the originally supplied Openreach modem but this has made no difference, I still get these random dropouts.
What does this error message mean?
I am happy to invest in my own own router or VDSL modem/router if this could improve the situation.
I am more than willing to downgrade to ADSL 2 and pay a more appropriate price for an unstable service!
If a moderator reads this, please invite me to contact you as this is a protracted problem that has been going on for nearly 18 months without resolution.
Solved!
Go to Solution.

There are more questions than answers!
Nine hours of line stabilty following three weeks of hourly disconnections and resyncs has now resulted in a drop in IP profile from 61 mbps download at its peak, to 48 mbps now. The attached screenshot was taken over a wired conection.
The only saving grace from the HH5 was that it provided wireless speeds close to the wired ones. The HH3 seems to drop about 6mbps on a wireless connection. I am willing to put up with this for the sake of a more stable connection. I am also willing to put up with the lowered IP profile for the same reason. I was always told that my line couldn't support more than 56 mbps down anyway.
I am a kilometre from the exchange, and my cabinet is right outside it, so I am copper pretty much all the way from the exchange. I always suspected that the faster Infinity 2 speeds may prove too much for my antiquated line.
Assuming the improvement in line stabilty continues (experience tells me not to hold my breath), does anyone know of a router that can provide a stable connection AND decent wireless speeds? The BT supplied equipment just isn't doing it for me!

PPP LCP Send Termination Request [User request] - ...

Had this problem now for a very long time, and recently came back in touch with it after I was forced to use my HH5 as my TPLINK ADSL router got bricked.
The problem only persists when using any BT issues router whether it be a HH3-5.
The event log is filled with firewall packet loss and blocked entries which I understand that is the firewall doing it's job which is fine. The line that keeps popping up is the one in the title of this thread (PPP LCP Send Termination Request [User request]) this pops up every time the connection drops.

this was raised before https://community.bt.com/t5/BT-Infinity-Speed-Connection/PPP-LCP-Send-Termination-Request-User-reque...
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

RMAN-06054: media recovery requesting unknown archived log

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/16/2013 09:03:43
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 34751 and starting SCN of 8923445274I am receiving the error above on performing RMAN Active cloning, please advise how to resolve this

In addition to what was said, I can think of two other possibilities for RMAN-6054 during duplicate: bugs such as 12625205 (also see 8554110); duplicate was run earlier without removing the old restored files (Note 1549172.1). In the first case, just specify SCN or find the actual log file and speficy log sequence, instead of time. In the latter case, remove the old restored files or speficy noresume.
Edited by: user11989003 on May 29, 2013 10:17 AM

Request airplay monitor

does anyone know how to use the function "request airplay monitor" (in german "AirPlay-Monitor anfordern") in OS X Server 4.0 Profilemanager?

Hi Ram,
If you are unable to delete the request from Manage..
Try to delete the request(s) from ODS admin tables RSODSACTUPDTYPE and RSODSACTREQ
remember this will deletes the request
from the administration tables only. If data exists in the ODS
then you must use selective deletion to remove the data
If you also need to delete from the change log then you can use
standard FM RSAR_ODS_API_DEL.
Regards,
Jonn

500: SeeFusion Terminated Request

What does all this mean?
I get this when trying to edit an Access DB or sometimes get
another 500 error.
500
ROOT CAUSE:
com.seefusion.SeeFusionKillError: SeeFusion terminated
request: Page Time at 50844ms >= limit of 50000ms (rule
"latentpages")
at com.seefusion.rd.a(rd.java:251)
at com.seefusion.Filter.doFilter(Filter.java:61)
at com.seefusion.SeeFusion.doFilter(SeeFusion.java:1471)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
javax.servlet.ServletException: ROOT CAUSE:
com.seefusion.SeeFusionKillError: SeeFusion terminated
request: Page Time at 50844ms >= limit of 50000ms (rule
"latentpages")
at com.seefusion.rd.a(rd.java:251)
at com.seefusion.Filter.doFilter(Filter.java:61)
at com.seefusion.SeeFusion.doFilter(SeeFusion.java:1471)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

This error is a result of SeeFusion being setup to catch long-running scripts or when a limit has been reached of some kind (memory, threads, time etc). SeeFusion can protect ColdFusion servers from having serious problems due to poorly scripted CFM pages or database slowdowns by mitigating the thread count. Please let us know if we can be of any further help. We run SeeFusion on our Shared ColdFusion hosting as provided http://hostek.com/hosting/coldfusion/coldfusion-hosting.asp.
Thanks,
Jon C.

PPP LCP Send Termination Request - was this ever r...

So after 3 and a half months, finally Infinity is installed.
Many thanks to forum mods for pushing this through.
And 7x the ADSL speed, at 20MB/s. Awesome.
Predictably, however, all is not rosy.
Between every 2 and 8 minutes, the VDSL modem (HomeHub5) drops the line and reconnects. Which is a bit useless as any streaming video drops, and browser sessions get the futile 'your broadband is broken' page.
I note from t'internet this is a known problem with BT stuff since HH3.
Is it not yet fixed? What can I do?
Each disconnect is preceeded with this log message:
16:59:06, 08 Mar.( 1537.800000) PPP LCP Send Termination Request [User request]
And when this occurs, the light goes orange for a few seconds. The speed remains the same after reconnect.
1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ33827646
3. Firmware version:
Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated 08/03/14
4. Board version:
BT Hub 5A
5. VDSL uptime:
0 days, 00:06:23
6. Data rate:
1238 / 21601
7. Maximum data rate:
1398 / 21720
8. Noise margin:
6.3 / 6.3
9. Line attenuation:
0.0 / 31.7
10. Signal attenuation:
0.0 / 26.3
11. Data sent/received:
4.8 MB / 24.1 MB

One of the features they introduced in the HH5 is to reboot the router if the sync changes, to keep the IP profile in line with the sync speed. Oops
To say thanks for a helpful answer, please click the white star

Is there any FM to generate spool request for error log of a background job

Hi,
I am going to create a program to create deliveries and do PGI. This program will be assigned to periodic background job.Now whatever errors are generated in program i have to send the error log to spool request.Is there any FM for generating spool request with this error log or how can this be done? Kindly provide sample code if possible.
Thanks.
Nimish Dongare.

Hi Nimish,
How are you doing, This is Shreekant working as ABAP developer, I sow your post in sdn forum, I have a similar requirement like I am changing the delivery taking some data from a flat file which is coming from other system and do PGI. If any error occurs during this process I need to capture it and present it as a report or create log file.. whichever is easier.
Please can u help me how did u achieved this functionality for your requirement?.. pls. can u share some details.
If u don mind, can u give me ur email id to communicate.
Thanks,
Shreekant

Request without Monitor Log: APO Request or Terminated Request Generation

Similar Messages

Maybe you are looking for