Request without Monitor Log:

HI Frds,
When i am deleteing a req. from ODS, i am not able delete the Req. I Req. status is in Red and tech. status also in Red. Its showing DTP/Infopackage as "Request without Monitor Log: APO Request or Terminated Request Generation" and not able to see the Moniter(RSMO).
Kindly can one give me some solution to delete these type req. ?
Thanks
Pari

Hi,
Apply the recommendation of the above note:
1138410-->execute the report RSSM_ZOMBIE_REQUEST_DELETE before checking  if you do not have entries in the table RSSELDONE or the table RSMONMESS but which may be displayed in the administration of a
data target with the descriptive text "Request without monitor log:  APO request or terminated request creation".
I hope it helps.
Best regards,
Fran.

Similar Messages

  • Request without Monitor Log: APO Request or Terminated Request Generation

    Hi,
    While loading data to ODS from the sources system there is new error request appearing in the ODS with following description:
    “Request without Monitor Log: APO Request or Terminated Request Generation”
    Unable to see the error details as this request is not appearing in the monitor, unable to delete the request from the ODS and the error message is below.
    Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed      RSMPC          060
    Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed      RSMPC          060
    Any thoughts on above issue are helpful.
    Thanks
    Kumar

    My thoughts on this...
    This problem might be caused by a program error.
    DataStore objects allow you to check or generate master data ID (SID) values during the activation. If you choose to do this, the parallel processes may terminate.
    <b>The following prerequisites must apply:-</b>
    You activate the DataStore object data in parallel (see transaction RSODSO_SETTINGS).
    During the activation, SID values are checked or generated (option "Generation of SID Values" is set).
    The generated programs of the InfoObjects of the DataStore objects are not current at the start of the activation (in particular, after metadata changes).
    Note 978772 - P10: Parallel SID generation terminates with deadlock
    Hope it Helps
    Chetan
    @CP..

  • Managing Request without Monitor Log: APO Request or Terminated Request Gen

    Hello Everyone,
    Need some help of managing a system created DTP named Request without Monitor Log: APO Request or Terminated Request Generation. This is like a staging DTP provided by SAP to support data loads to DSO or Cube and, it's good if the process goes smoothly.
    However when we encountered unnecessary error such as tables space or memory problem, this particular job will get stuck and there's no way to move forward or backwards from this point. There were some answers to delete the request from RSICCONT, but I don't see the direct relations here, or maybe I'm wrong.
    My only question - Have anyone any idea on how to work around this.
    The last thing I've in hand is to delete the whole thing (requests) and re-do from start (extraction). Not a pleasant thing as this DSO feeds to 2 Cube & 1 DSO and then to another Cube. 
    Thanking everyone in advance.
    Regards,
    Azmadi

    Hi,
    sad to knw you had to delete the whole data and reload. I faced the same issue today and here is what i did,
    when you go to the reconstruction tab, you will find 2 ticks present
    1st one that tells if request is available in data target and
    2nd which gives the transfer structure status.
    Now, if the first check is crossed it could mean 2 things....data no longer exists in data target or data was not updated to data target these are 2 different things.
    So, in your case it wud have sed data was not updated to the target.
    Solution, just reconstruct that request and then in the request tab mark it red and delete again since you dont need it.... then the activation through process chain will not fail.

  • Requests without Monitor Log: APO Request or Terminated Request Generation

    Hello all,
    Can you please help me in the following issue:
    I had in an ODS, a full request of type:
    Requests without Monitor Log: APO Request or Terminated Request Generation.
    I deleted the request from table: RSICCONT in debugging mode. The request was on green.
    Now I have problems on activating the next requests in automatically. Manually it is working.
    Request REQU_6DFXRA2VWJL3KYU44JPCWKXL2 no longer exists in DSO SVO_PPAB; system is inconsistent
    Activation of M records from DataStore object SVO_PPAB terminated
    Please help
    Thank you
    Ramona

    Hi,
    Refer the below links,
    Re: Managing Request without Monitor Log: APO Request or Terminated Request Gen
    http://ar.delhigovt.nic.in/ar1/Mission%20Conv%20RFP%20-%20Vol%20I-%20V4.0.pdf
    http://help.sap.com/bp_bblibrary/600/documentation/R61_BPP_EN_DE.doc
    Hope it helps you,
    Regards,
    Ravindra.

  • DBIF_DSQL2_DEFAULT_CR_ERROR": APO Interface without monitor log

    Hi
    V3.x
    'Manage' in ODS - IP displays following message: " Request loaded using the APO interface without monitor log". The request is red in ODS and other requests after this request do not activate. Zero records were loaded from flat file.
    The request is green in Monitor.
    SM37 displays the following message: "ABAP/4 processor: DBIF_DSQL2_DEFAULT_CR_ERROR"
    What do I do to rectify this?
    Thanks
    Cj

    Hi
    please ignore my previous statement. I've noticed that the IP in the monitor is already green but that te following message is displayed: "Request REQU_49UKKF2TZEX4Z7WRU6BW28IM6 in ODS ZABAND must have QM status green before it ......"
    Now I sit with inactive requests before and after this request that is red.
    What do I do to rectify this please?
    Cj

  • Communication channel monitoring logs

    Dear all,
    on weekend we had a problem with a CC. Messages not have beend pick up from
    a FTP server. The problem was solved automatically and I was not able to see
    any error entries in the CC monitoring log files because there were to many
    entries without error.
    My question:
    Is there an option for persisting the logs into a trace file on server? I was not
    able to find the entries in defaultTrace or anywhere else.
    How to raise the time/size of the log files?
    Thanks
    Chris

    Hi,
    I think the channel was getting locked and so, it could not pick up any data.
    Refer the SAP note 849089 for this.
    -Supriya.

  • RMAN-06054: media recovery requesting unknown archived log

    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 05/16/2013 09:03:43
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 34751 and starting SCN of 8923445274I am receiving the error above on performing RMAN Active cloning, please advise how to resolve this

    In addition to what was said, I can think of two other possibilities for RMAN-6054 during duplicate: bugs such as 12625205 (also see 8554110); duplicate was run earlier without removing the old restored files (Note 1549172.1). In the first case, just specify SCN or find the actual log file and speficy log sequence, instead of time. In the latter case, remove the old restored files or speficy noresume.
    Edited by: user11989003 on May 29, 2013 10:17 AM

  • Alert Monitoring log

    Hi,
    When I configured alert monitoring. Alert is creating when I run report SXMSALERT_PROCESS_DATA_GET. But this alert is not reflecting in the alert inbox eventhough all configuration done. Then I have gone to log then I found errors as follows.
    warning: Address receiptent of "KPRKS00" (INT) could not be determined.   ( I configured this user as single receiptent in tcode alrtcatdef).
    ERROR: send Request for INT has no receipients.
    Any help in this regard is welcome. Thanks in advance.
    Thanks,
    Mallikarjun.M

    Hi,
        I follwed according to your steps. Finally I checked in alert Monitoring log, In that I noticed error as follows.
    warning: Address receiptant of "KPSSO" (INT)could not determined.
    ERROR: BCS Exception (DNS_SREQ) occured.
    I notice this is bcoz in tcode "ALERTCATDEF" in configuraiton I selected "internal processing".
    I hope a favourable reply. Thanks in advance.
    Thnaks,
    Mallikarjun.M

  • Request airplay monitor

    does anyone know how to use the function "request airplay monitor" (in german "AirPlay-Monitor anfordern") in OS X Server 4.0 Profilemanager?

    Hi Ram,
    If you are unable to delete the request from Manage..
    Try to delete the request(s) from ODS admin tables RSODSACTUPDTYPE and RSODSACTREQ
    remember this will deletes the request
    from the administration tables only.  If data exists in the ODS
    then you must use selective deletion to remove the data
    If you also need to delete from the change log then you can use
    standard FM RSAR_ODS_API_DEL.
    Regards,
    Jonn

  • How to data load without monitor entry?

    Hello,
    the atttibuts of a character are filled daily. There is no Request.
    Does anyone know, how I can find out from where the Data comes without monitor entrys?
    Thank you!
    SW

    Hi
    You can check whether any customised ABAP coding is used to fetch data from some data source and fill the related master data
    RSRD_ATTR_DEP - dependencies of attributes.....
    Like this, there can be some link tables which could be used in custom ABAP code to automatically fill the attribute values
    Bye
    N Ganesh
    assign points if useful**

  • [SOLVED] x11vnc without monitor connected

    How to start correctly x11vnc (or eventually vncserver) without monitor connected?
    In the wiki is written
    "Note: By default, Xorg needs to be able to detect a monitor and will not start otherwise. A workaround is to create a configuration file such as the example above and thus avoid auto-configuring. A common case where this is necessary is headless system, which boots without a monitor and starts Xorg automatically, either from virtual console and login, or using a display manager."
    However this is not working in mycase. I cannot connect to previuosly configured x11vnc if monitor is detached. X is not starting. I am sure that the driver is right.
    This is a system with LXQt desktop and sddm.
    Last edited by hifi25nl (2015-05-14 11:03:32)

    The dummy config file found in the wiki worked fine for me for the xserver itself (just make sure to pick the resolution(s) you want), but not all display managers worked correctly (GDM in particular is a problem, but I've had trouble with others).  I've been able to use x11vnc on headless systems ranging from 5th generation i7's to raspberry Pis, so it's definitely possible.
    It would help if you could provide your xorg.conf.d configuration, and your X or VNC logs so we could see what the issue is. 
    Try disabling your display manager and rebooting without a monitor attached, starting x manually via ssh, and then exporting the DISPLAY before starting x11vnc. For example try running the following lines interactively from the console via ssh.
    startx &
    export DISPLAY=:0
    xrandr --fb 1920x1080
    x11vnc --fbauth /path/to/password -display :0 -geometry 1920x1080 auth guess -forever -bg
    Make sure to pick a mode (resolution) that's supported in your configuration files, etc. Those commands should give you copious error messages if they fail, which will give us a place to start.
    As an aside, if all you want is a vncserver, tigervnc will work with much less fuss because it creates a virtual display so you don't need to mess with your xorg settings at all.  x11vnc (without addins) relies on your system's literal physical display output device, which is what necessitates all the xorg fiddling.  The only reason to use x11vnc is if you need to remote control an actual screen (which doesn't sound like your use case) or if you need the desktop you're VNCing into to have hardware acceleration for some reason.  Tigervnc will "just work" in most setups without significant additional configuration.
    Last edited by mwillems (2015-05-13 19:48:47)

  • Monitoring Log in SharePoint Foundation 2010

    Hello,
    I´m using SharePoint Foundation 2010 and I want to configure Monitoring log, because we have had any problems because the user changed the permissions in other sites or deleted Users.
    So I want to know who  makes this action in Monitoring Log SharePoint 2010.
    Regards.

    Take a look at this 3rd party solution:
    https://auditlogsp.codeplex.com/
    The Site Collection Administrator can modify audit settings, but audit settings aren't available OOTB in Foundation.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HT1353 Is it possible to have another iCloud login on my unit without me logging into that account?

    Is it possible to have another iCloud login on my unit without me logging into that account?
    I lost my iTouch4 last June10 after a party. I stayed in a hotel with my team that night when i lost it --- lost in the hotel not in the party. I just got my new iPhone 4S this June25. When i used Find my Phone app i saw that there are 2 devices: ipod (named after one of my teammates) and iPhone (under my name). whne i check the features of my iPhone, the contacts, calendar, bookmarks and apps i downloaded previously on iTunes are sync to what i entered on my iTouch. My teammate told me that he also noticed that on "his iPod" and he dont know why his apple ID was changed to mine.
    Is it possible to get that situation? Or is that an evidence that he has my iPod touch 4?  I need help to clear things out. Thanks.

    - I do not understand what yo are seeing with the FIndMyiPod app. That app can set up to find any iOS device. you just have to enter the Apple ID and passwords used for that device.
    - on your computer go to iCloud, sign into your account and go to FindMyiPhone. What do you find?

  • Down payment request without PO possible?

    Hello,
    Is it possible to create a down payment request without having to use a PO.
    This concerns financial postings for services.
    Thank you for sharing your experience.
    Kind regards,
    Linda

    Hi
    Check the below TCodes which does not require PO / SO
    For Vendors
    F-47 - Request
    F-48 - Down Payment
    F-54 - Clearing
    For Customers
    F-37 - Request
    F-29 - Down Payment
    F-39 - Clearing
    Cheers
    Srinivas

  • Need help in generating L4 Traffic monitor logs

    Hi,
    As a part of my project I need to study different types of logs produced by Cisco IronPort. I could generate some access and authentication logs however not sure about generating the L4 Traffic Monitor logs. Can anyone point me to right documentation that will help me generate those logs?
    Thanks,
    Harshad Kashikar

    Harshad,
    L4 Traffic Monitoring needs to be configured within the IronPort - first question is do you have a SPAN/TAP port set up on your switch to capture L4 traffic?
    Second, I only use this feature to capture information on malware/spyware - I have seen P2P, IRC, and 'phone-home' traffic amongst other things.  Do you have an infected host you can monitor?
    BF

Maybe you are looking for

  • Can we load data in variable screen from flat file?

    Hello all, One of my user once asked me she needs to run a report for some employees, i said you can just type that in employee varaible input box. She said I need to run the report and I need it for 120 employees, she has the employee numbers in exc

  • How do I find out the name of my wireless chipset/interface?

    I'm doing a install of Arch and I need to setup my WLAN. So the wiki says: "After finishing the rest of this installation and rebooting, you can connect to the network with wifi-menu interface_name (where interface_name is the interface of your wirel

  • Port Forwarding for Minecraft

    I have a BTHomeHub 1, and port forwarding minecraft has been an awful experience which I just can't get to work. I've tried everything, and just cannot get this to do what I want.  this is what I have currently set up. Also, how do I tell what my com

  • ORA-12514 TNSlistener does not currently know of service requested in conne

    When I connect in command prompt using username,password & Host String(tnsNames.ora). Its succeed as seen below. C:\>sqlplus sonia/mypass@sonia - In this line First sonia is the userName & second Sonia is the host from the tnsnames.ora SQL*Plus: Rele

  • Installing Apex 4 on Oracle 11.2.0.3 with Oracle HTTP Server on WINDOWS

    Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2... TIA!